Insulation
Insulation using Swedish technology from 4 200 ₸ per linear metre around the perimeter. Eliminates draughts along the sash contour.


Insulation
Insulation using Swedish technology from 4 200 ₸ per linear metre around the perimeter. Eliminates draughts along the sash contour.

Painting
Sanding and painting from 8 100 ₸ per window. Surface preparation and application of the coating.

Glass replacement
Broken glass replacement from 8 000 ₸ per m². Glass and installation included.

Sash fitting
Wooden window frame repair from 16 000 ₸ per job. We fit the sash to the opening so the window closes.

Glazing bead replacement
We restore the glass fixing in the frame. The exact price is given by the master after inspection.

5,010 reviews
Repair restores the frame to working condition: the sash closes, no draughts from gaps, the glass stays in the glazing bead.
Wooden window repair means work on the existing frame and sash without removing the block. The master works with wood, glass, glazing bead and hardware: tightens hinges, replaces handles and locks, restores glass fixing.
Restoration differs from window replacement in that it preserves the original box and opening geometry. If the wood is sound and the damage is local, repair costs less than a new block and does not require finishing the reveals.

warranty on window repair: work and replaced components
measuring and consultation before work starts
master visit and inspection in Astana within the city
The master fixes most wooden window faults in one visit, without taking the frame to the workshop.

Insulation using Swedish technology: the sash contour is sealed, draughts disappear.
Sanding and painting: we remove the old coating, prepare the wood and paint it again.
Replacing a section of wood: the damaged fragment is cut out and a new one is inserted.
Fitting the sash to the opening so the window closes again without effort.
Glass replacement with new fixing in the glazing bead.
Glazing bead replacement: the glass is fixed in the frame again.
The technician arrives with tools and materials and works on site. Below are the types of work with an approximate price per unit.
Swedish method

Sealing the sash perimeter, eliminating draughts.
preparation and application

Sanding the old coating and painting the window.
glass and installation

Removing the broken glass and installing a new one in the glazing bead.
handles, hinges, locks

Replacing worn parts so the sash holds and locks properly.
between frames, around the perimeter

Installing a seal between the frames to protect against draughts.
Approximate prices for work; the exact cost is fixed by the technician after measuring.
| Type of work | Price |
|---|---|
| Wooden window restorationsanding and painting | from 18 000₸ per m² |
| Wooden window paintingpreparation and application | from 8 100₸ per window |
| Wooden window frame repairdepending on frame condition | from 16 000₸ per job |
| Wooden window repair and insulationeliminating draughts | from 28 000₸ per window |
| Wooden balcony block repaircomplete block | from 53 500₸ per unit |
| Wooden window hardware replacementhandles, hinges, locks | from 1 150₸ per unit |
| Wooden window insulation using Swedish technologyaround the perimeter | from 4 200₸ per linear metre |
| Installation of inter-frame sealaround the sash perimeter | from 2 800₸ per window |
| Broken glass replacementglass and installation | from 8 000₸ per m² |
| Master visit and inspectionwithout ordering a repair | from 3 600₸ per job |
The price is fixed in the order after measuring.Measuring and consultation are free.Payment after installation: cash, card or Kaspi.
Call a technicianRepair brings the window back to working condition and gives the owner predictable terms of the deal.
How repair differs from window replacement in terms of intervention in the opening and what this gives the owner
What the inspection before work includes and what questions to ask the technician on site
How to make the result last longer: care for painted wood and the seal between seasons
How to prepare the window for the next season: what to remove and how to wash the wooden frame
fixed in the order after measuring
What to clarify with the technician about hardware and glazing beads so the sash doesn't swell again
on WhatsApp to your question
We work across Kazakhstan
Four steps from request to acceptance of work.

You leave a request, the technician arrives, inspects the window and takes measurements.

You discuss the scope and cost, the price is fixed in the order.

The technician performs work on the sash, frame, glass or hardware.

You check how the sash closes, whether there are draughts, and accept the work.
Three requests for wooden windows: what the issue was and what we did.
Wooden euro windowsThere was a draught from the frame gaps, the room was cold. The windows are wooden euro, the sashes closed, but there was a draught along the contour.
We insulated using the Swedish method: sealed the sash contour around the perimeter.
Draughts eliminated, the window keeps the heat.
SchoolThe paint on the frame was peeling, the wood was exposed. The window needed to be put in order.
We sanded the old coating and painted the frame.
The frame is painted, the coating is renewed.
Private houseIn a private house of old construction, the bottom of the sash had rotted, the wood became loose.
We replaced the damaged section of wood.
The sash is restored, the bottom no longer deteriorates.
Good to know
We handle wooden window repair in Astana with our own crews, not through an aggregator. We diagnose the sash and frame, replace seals and glass units, insulate and adjust the window, then fit a made-to-measure mosquito screen if you want one. Measuring is free, the price is fixed after measuring, and you pay after installation.
A window in Astana is often still worth repairing. The real question is not how old the woodwork is but how sound the timber, the moving parts and the joints remain after years of frost and summer heat.
Our measurer checks the frame, the sash and the joints on site and tells you straight whether the unit can be repaired or is past saving. The visit is free, and the specialist comes at a time that suits you, takes the sizes and looks at how the sash sits in its rebate. Timber that is dry and cracked along the surface usually responds well to sanding, sealing and new fittings, and the same goes for a panel that has dropped on its hinges. Rot is different: once it runs through the corners or the lower rail, patching is no longer a lasting fix. A sound carcass with a warped panel is normally a repair job; rot through the corners is where replacement makes more sense. When the timber is sound, wooden window repair in Astana usually costs less than a new unit and keeps the original frame in place.
Repair keeps your existing frame and sash and restores the seal, glass and fittings, while replacement means a fresh window assembly fitted into the wall aperture. A repair covers the parts that fail first: the seal that has flattened, the glazing that has misted between the panes, the hinges and the putty or beading that holds the glass in place. Replacement removes the whole assembly and mounts a new one, which means fresh carpentry work around the aperture and a new finish. In older housing the original timber often matches the building's proportions, so restoring it can preserve both the look of the facade and the fit in the wall. A plastic option is worth considering when the wood itself is gone, yet it changes the character of the facade.
Repairing a window is rarely a single fix. It covers the moving panel, the seal, the glass, the fittings and the coating, and the exact scope depends on which of them has failed.
| Part | What we do | Why it matters |
|---|---|---|
| Sash and fittings | Adjust, re-hang, tighten joints | Stops sagging and rubbing |
| Seal | Replace around the perimeter | Blocks draughts and dust |
| Glass unit | Swap for a new one | Restores insulation and clarity |
| Glazing bead | Re-fit or renew the wooden strip | Holds the pane firm |
| Coating | Sand and repaint the timber | Keeps moisture out |
Wood moves with moisture and temperature, so repair focuses on re-seating the moving panel, sealing the joints and restoring the coating, while plastic work is mostly about adjusting hardware and swapping seals. A timber panel sits on hinges and is held by glazing beads — thin wooden strips that press the pane into place — so any work on the glass starts with those strips, not with a rubber gasket. Plastic profiles do not swell or shrink, which is why a plastic fix often ends with a screwdriver and a new seal. On timber, the seal runs around the perimeter and stops draughts once the window is closed, but it only holds if the wood underneath is sound and painted. Because timber swells and shrinks across the seasons, a repair that ignores the coating will let moisture back in and undo the sealing work.
We re-seat a dried-out or warped sash back into the frame, tighten the joints and restore the glazing bead so the pane sits firm again. A timber panel fastens into the frame through its hinges and the glazing bead that holds the glass, so one that has pulled away at a corner usually needs both re-tightened, not just a turn of the handle. Our team checks the fittings and mechanisms at the same time, because a hinge that has worked loose lets the panel drop and rub against the frame. A sash that has dried out over several winters needs its joints re-tightened before it is re-hung, otherwise the new fit will loosen again as soon as the heating season starts.
Draughts around the leaf edge are the most common complaint about wooden windows here; in most cases the weatherstrip and a loose fit are at fault, not the frame itself.
Cold air usually enters where the weatherstrip has flattened, hardened or pulled away, and the draught gets worse once the leaf stops sitting tight against the rebate. Timber moves with the seasons, so a gap that closes in summer opens again in winter. The strip is the thin elastic line running around the perimeter, and it is the part that actually blocks airflow when the window is shut. Once it compresses permanently, air passes between wood and frame even though the handle turns fully. Sharp temperature swings in the capital harden a seal faster than a mild climate would, so a strip that looks fine in autumn can start leaking air by the first hard frost.
Two parts of a window get renewed most often — the glazing and the finish — and both can be handled without touching the sash or the outer frame.
We replace the glazing in a wooden frame, and urgent glass unit replacement is done within one day for an extra charge on the unit price. The old pane comes out, the rebate is cleaned of putty and debris, and the new assembly is seated on fresh bedding. The glazing bead that holds the glass has to come off and go back cleanly, so the job is as much about that strip and its seal as about the pane itself. Refitted with gaps or split pins, it lets water reach the wood edge, and that is where rot can start. On older sashes we check each length for cracks before refitting and swap the pieces that have gone brittle — the opening is measured first, since an old rebate rarely matches a standard size exactly.
From the first message to a finished window, the sequence is straightforward. Below is how the visit and the repair run, how long it takes, and what the warranty covers once everything is done.
| Work | Warranty term |
|---|---|
| Window repair, labour and replaced parts | 1 year |
| Glass unit replacement | 3 years |
| Window installation | 5 years |
A timber window usually has more life left in it than its owner assumes, and the verdict rests on the condition of the woodwork and the sash rather than on age alone.
Restoration and repair of wooden windows
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionMost often such windows are restored: the sashes are taken apart, glazing beads and seals are replaced, insulation and painting are done. Replacement is needed only if the wood has rotted through or the frame geometry is compromised — this will be shown by the specialist's inspection.
If there is a draft around the perimeter, the sash does not close tightly, or the glazing beads are loose, painting alone will not be enough — you need to take the window apart and replace the seal and glazing beads. When the wood is intact and retains heat, it is enough to refresh the coating.
Yes, when repairing wooden windows, the second pane is often replaced with a double glazing unit while keeping the frame itself. The possibility depends on the thickness of the sash and the condition of the rebate — the specialist will check this during the inspection.
Restoration keeps the existing frame and sashes, replacing worn parts and insulation, while new installation means removing the old windows and fitting new ones. Restoration is often faster and less disruptive, but it depends on the condition of the wood.
To insulate wooden windows, an inter-frame seal, cord, and sealant for joints are used, and gaps are filled on site without losing ventilation. The specific set depends on the window and is selected after inspection.
Yes, the specialist comes to your home at a convenient time, and measuring and consultation are free. They will inspect the windows, determine the scope of work, and fix the price in the order after measuring.
Отрегулировали и поменяли резину на двух окнах, все хорошо, теперь не дует, окна очень плотно закрываются, сделали быстро, спасибо
Приехали сразу и заменили ручки спасибо большое я довольна
Ответственные, пунктуальные и приятные в общении специалисты. Все договорённости соблюдены, работа выполнена аккуратно и в срок. Очень приятно иметь дело с людьми, которые ценят время клиентов и добросовестно относятся к своему делу. Вы молодцы! Спасибо вам большое 🤍
Пишу отзыв по истечении более 10 дней после замены оконных " запчастей". Работа аккуратная. Мастер Батырхан после себя убрал, показал конечный результат, заменил старые части окна на новые. Главное, теперь с окон не дует и в комнатах тепло. Обращайтесь в Центр Окон, если важно соотношение Качества и Цены. Благодарю Вас, Батырхан.
Всем привет ребята выполняют свою работу на отлично
Отличный мастер, быстро чётко аккуратно всё сделал, цены демократичные, спасибо!
Все супер, быстро и четко, цены радуют, устанавливали в подъезде окна, 👍👍
благодарю за выполненную работу, быстро и качественно.
Спасибо мастеру Батырхан. Мастер своего дела. Все сделали быстро и качественно. Всем советую
Хочу выразить благодарность мастеру Батырхану за качественную работу! Приехал вовремя, быстро определил причину проблемы и профессионально выполнил ремонт окон. Всё сделал аккуратно, все объяснил, ответил на вопросы. Видно, что человек знает своё дело и ответственно относится к работе. Осталась очень довольна результатом! Рекомендую как грамотного и добросовестного специалиста.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp