PVC window
Single-leaf with installation — from 42 500 ₸ per window, double-leaf — from 65 500 ₸. Suitable for apartments and houses.


PVC window
Single-leaf with installation — from 42 500 ₸ per window, double-leaf — from 65 500 ₸. Suitable for apartments and houses.

Aluminium profile
Lightweight profile for glazing loggias and balconies. Installation — from 4 650 ₸ per m², free measuring visit.

Wooden window
Wooden frames for houses and country homes. Replacement with removal of the old frame — from 1 800 ₸ per m².

Soundproof windows
For apartments near a road: reinforced profile and double glazing. Installation to GOST — from 5 200 ₸ per m².

Energy-efficient
Coated double glazing keeps warmth in winter. Turnkey window — from 60 000 ₸ per m².

5,097 reviews on review sites
Removal of the old frame, preparation of the opening and installation of a new unit with reveals, window sill and drip sill
Before installing the new unit, the technician checks the geometry of the opening, levels the base and treats the surface for the installation joint. This determines how tightly the frame fits and whether draughts occur.
The replacement package includes, besides the unit itself, a window sill, drip sill, reveals and fixings. The window sill protects the wall from moisture, the drip sill drains water outside, the reveals insulate and cover the installation joint, and the fixings ensure the sashes open and lock.

standard window installation per m²
installation time for one window
warranty on installation work
The fixing method is chosen based on the wall material and unit weight; if a joint freezes after someone else's installation, reinstallation is carried out

Flexible plates attach the frame to the opening without damaging the profile. Suitable for most walls.
Rigid fixing through the frame into the wall. Used for heavy units and large openings.
A combination of plates and dowels for reliable fixing on complex bases.
Reinstallation differs from initial installation in the scope of work on the opening and joint: the old frame is removed, the opening and joint are prepared anew, and the unit is installed with new insulation. Ask the technician which stages of opening preparation and joint sealing are included in reinstallation.
Five options for different needs: from budget PVC to soundproofing and energy efficiency
PVC profile · double-chamber double glazing

For apartments and houses with standard requirements for warmth and quiet.
Aluminium profile · single-chamber

Light and durable, suitable for loggias and large openings.
Wooden frame · double glazing

For private houses and country homes where natural material matters.
Reinforced profile · thick double glazing

For apartments near roads and on windy sides.
PVC profile · coating

Keeps warmth in winter and reduces heating costs.
Cost of work and structures; the exact amount is fixed after a free measuring visit
| Type of work | Price |
|---|---|
| Installation of a PVC windowstandard installation | from 4 650₸ per m² |
| Window installation to GOSTwith vapour and waterproofing | from 5 200₸ per m² |
| Dismantling of old windowwith disposal | from 1 800₸ per m² |
| Single-leaf PVC windowwith installation | from 42 500₸ per window |
| Double-leaf PVC windowwith installation | from 65 500₸ per window |
| PVC window with installationturnkey | from 60 000₸ per m² |
| Balcony unit with doorwith installation | from 95 500₸ per unit |
| PVC window sill installationwith cutting | from 5 500₸ per linear metre |
| Drip sill installationwith sealing | from 3 250₸ per linear metre |
| PVC reveals (sandwich panels)with installation | from 4 700₸ per linear metre |
| Reveals for a standard window, turnkeywith finishing | from 15 000₸ per window |
| Sealing of external jointswith material | from 2 000₸ per linear metre |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi
Calculate the costFacts about the company: warranty, measuring, payment and price fixing
for window installation work
for double glazing replacement
free, at a convenient time
and profile painting to match window colour
cash, card or Kaspi
after measuring, no extra charges
of Kazakhstan, including Kyzylorda
we reply within 5 minutes
Four steps from request to finished window

The measurer checks the opening geometry, wall material and reveal depth, and records dimensions for production.

The window is manufactured to the measured dimensions at the production facility.

The old frame is removed, the opening is prepared and the new unit is installed according to GOST.

The technician checks the sashes and hardware and removes debris after installation.
Good to know
We handle pvc window installation in Kyzylorda from the first free measuring visit to the final check, using our own installers rather than subcontractors. The measurer comes at a time that suits you, fixes the price in the order, and you pay only after installation by cash, card or Kaspi. Every installation carries a 5-year warranty.
A measuring visit is not a formality: it is where the size, the system and the fixings are decided. With us it costs nothing, and a specialist comes to your address at a time that suits you.
Our measurer comes at a convenient time, takes the exact opening size, checks the wall and floor level, and helps you choose the profile, glass unit and fixings in one visit. He measures the bare aperture at several points — width, height and depth — because plastered walls are rarely perfectly square, and notes the sill height and the condition of the reveal. The consultation is free, so you can compare an Economy and a Prestige system on the spot and see how each one changes the light and the usable sill depth. This is how pvc window installation kyzylorda starts for every order, with the opening measured before anything is made. A measurement taken from the old window rather than the bare aperture is the most common reason a unit arrives too small, so the measurer always works from the opening itself.
A turnkey installation covers removal of the old frame, fitting and levelling the new one, sealing the joints, setting the sills and slopes, adjusting the sashes and cleaning up, and the price is fixed in the order after measuring. Our own installers handle every stage, so the crew that measures is the crew that fits the unit. Levelling matters most on the first floor of an apartment block, where a few millimetres of tilt show up as a draught along the sash edge. Sills and slopes are set with the same sealant line as the frame, which keeps rain from tracking back under the profile. Because the price is locked at the measuring stage, any extra work agreed on site is discussed and confirmed before the crew starts, not added to the bill afterwards.
The profile and the double-glazed unit decide how quiet and warm a room stays through summer heat and winter cold. Here is how the two options differ and when the glazing is replaced on its own.
| Parameter | Economy | Prestige |
|---|---|---|
| Depth | 32 mm | 42 mm |
| Chamber width | 10 mm | 17 mm |
| Best for | Standard rooms | Larger openings, colder rooms |
| Stiffness | Light and compact | Deeper, more rigid |
If the surround is sound and the leaves still close tight, we replace only the glass unit, which carries a 3-year warranty, and urgent replacement can be done within one day. A sealed pane fails at the edge seal long before the frame body does, so the hinges and handles usually outlive the glazing by years. Our crews swap the glazed panel without touching the surrounding structure, re-set the beads and check the drainage channels afterwards. Urgent orders are scheduled for the next day once the size is confirmed and the pane is in stock. Fogging between the panes or a film of condensation on the inner surface points to a broken seal, not a warped window — test the leaf with a level and a feeler gauge before ordering a whole new one, because a sound surround rarely needs replacing.
How the window is fixed and how exactly it is sized decide whether it stays level for years. Both questions are settled at measuring, and here is what drives the choice.
Our installers pick the fixing to match the window profile and the floor, using anchors for solid panel walls and mounting plates where the opening or facade calls for a different load path. In panel-block buildings the anchor bites into the concrete around the opening and carries the weight straight into the slab, which is why that route dominates on upper floors. In private houses with brick, block or timber walls, mounting plates often work better: they spread the load across a wider area and let the unit sit true even when the reveal is uneven. Floor height and facade type are checked before anything is drilled, together with the profile depth and the weight of the glazing. The fixing choice also affects how the joint is later sealed and insulated, so it is decided at measuring, not improvised on the day.
The frame is made to the measured opening with the correct mounting gap on every side, and non-standard openings are handled the same way, just with a custom size. Our measurer records the width and height at several points, notes the deepest and narrowest spots, and checks how far the walls are out of square, because an arched or sloped reveal needs its own geometry rather than a scaled-up standard window. Once the numbers are in, the measurer helps choose the profile, glass unit and fixing that suit the room, and the order carries the exact dimensions the workshop will build to. Leaving the right gap matters more than the exact millimetre of the finished product, because that gap is what the foam and seal fill to keep the joint airtight.
On site the work moves in steps, and each step can be checked before the next one starts. Below is how the day looks and what to look at when you accept the job.
Before signing off, open and close every sash, run the handle through its tilt and turn positions, look for gaps along the joint and confirm the board sits level with no draught coming through. Press a palm along the perimeter and around the window sill line, then check that the drainage slots under the sashes are open and not painted over. Our installers set and adjust the sashes and check the seal after mounting, so any stiffness is easiest to correct while the crew is still on site. A sash that rubs now will only get worse as the frame settles, so flag it on the spot rather than waiting for the first cold snap. Ask for the foam line to be trimmed flush and the tape pressed down before the team packs up.
A failing window does not always mean a new one. Often the frame is sound and only the seals or hardware have worn, so the first step is to understand what is actually wrong and what the cover includes.
If the frame is intact and the draught comes from worn seals or loose fittings, we repair and adjust it under a 1-year warranty instead of selling a new window. Our crews renew sealing, tighten or swap hardware and realign sashes on units of any make, including KBE, Rehau, VEKA and Provedal profiles. A sash that catches, a handle that turns hard or a hinge that has dropped are adjustment jobs, not swap-out jobs. A draught that appears only in one corner usually points to a failed seal or a shifted sash, both fixable without touching the frame. Ask for a repair visit before ordering a new one — a short inspection tells you which path is cheaper and whether the glazing itself is still sound.
| Work performed | Cover period | What it includes |
|---|---|---|
| Installation | 5 years | Our fitting work and supplied parts |
| Glass unit replacement | 3 years | The new glazing and its fitting |
| Repair | 1 year | Labour and replaced parts |
A window that works well for years comes down to a few decisions made before the frame ever goes in. Here is what matters most, in short.
Work, measuring, dismantling, timelines
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionWindow replacement includes dismantling the old frame, installing the new one level with the opening, sealing exterior joints, and fitting the windowsill, drip cap, and reveals. You don't need to order these elements separately if they are part of the order.
The measurer takes dimensions from the opening, not the old frame, to account for wall irregularities and the required installation gap. The free measuring visit and consultation are included, and the price is fixed in the order after measuring.
Yes, you can replace only one window while the others stay as they are. The main thing is that the new window matches the style and profile of the others, and the measurer will help you choose a suitable option.
The old frame and double glazing are carefully removed and taken away with the debris after fitting. If you want to keep the frame, let them know in advance, and the team will set it aside separately and not throw it away.
The timeline depends on the size of the opening and the condition of the reveals, and the technician will give a more precise estimate after measuring. If you are replacing several windows, the work is planned so that you are not left without light.
Yes, fitting is carried out even in cold weather, and the opening is only open during dismantling and installation. The room does not have time to cool down during this period, but in severe frost it is better to plan the work in advance.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp