Standard welded
Standard pattern, price from 7 500 ₸ per m². Installation 4 500 ₸ per m², removal of old — 4 000 ₸ per item.


Standard welded
Standard pattern, price from 7 500 ₸ per m². Installation 4 500 ₸ per m², removal of old — 4 000 ₸ per item.

Wrought iron
Forged elements, price from 26 000 ₸ per m². Suitable for a country house or home where facade aesthetics matter.

Swing
Surcharge per leaf 15 000 ₸. Lock insertion — 5 000 ₸ per item, hinges and latch selected by the technician.

Removable
Removable version on anchors — from 16 500 ₸ per m². Convenient when you need access to the window for washing.

With fire hatch
Hatch in the grille — 15 000 ₸ per item. Serves as an emergency exit, lock is inserted separately for 5 000 ₸.

5,097 reviews on review sites
A welded frame made of steel rod with a pattern, mounted outside the opening. Protects against break-ins and falls, does not hinder ventilation.
The grille consists of a steel frame around the perimeter of the opening and rods inside: vertical, horizontal or with a pattern. The rod spacing and metal thickness determine strength and the visual rhythm of the facade. The frame is attached to the wall or reveal with anchors, hinges or removable brackets.
By design, there are standard welded, wrought iron with forged elements, blown convex and decorative with laser cutting. Welded is the most affordable option from 7 500 ₸ per m², wrought iron — from 26 000 ₸ per m². Installation is calculated separately: 4 500 ₸ per m².

price of welded grille per m²
grille installation on the opening
fire hatch in the grille per item
The attachment method depends on the wall material, floor and whether access to the window is needed. The technician selects anchors, hinges or removable brackets after measuring.

The frame is screwed with anchors to the wall or reveal. Depth and spacing depend on the material: brick, concrete, aerated block.
The leaf opens on hinges like a door. Surcharge per leaf 15 000 ₸, lock insertion for 5 000 ₸.
The grille is removed entirely if access to the window or washing is needed. Price of removable version from 16 500 ₸ per m².
Grille repair — welding and straightening — 6 000 ₸ per job. Removal of old grille 4 000 ₸ per item.
The cost depends on the type of grille, the size of the opening and additional work.
| Type of item | Price |
|---|---|
| Standard welded grillestandard pattern | from 7 500₸ per m² |
| Wrought iron grillewith forged elements | from 26 000₸ per m² |
| Blown grilleconvex | from 26 500₸ per m² |
| Decorative grillelaser cut | from 25 000₸ per m² |
| Sliding accordion grillefolding | from 28 000₸ per m² |
| Swing leafsurcharge | from 15 000₸ per leaf |
| Removable grille on anchorsremovable version | from 16 500₸ per m² |
| Fire hatchin the grille | from 15 000₸ per item |
| Lock insertioninto the grille | from 5 000₸ per item |
| Powder coatinggrille painting | from 5 500₸ per m² |
| Grille installationfitting | from 4 500₸ per m² |
| Grille repairwelding, straightening | from 6 000₸ per job |
| Removal of old grilletake down | from 4 000₸ per item |
The price is fixed in the order after measuring.Measuring and consultation are free.Payment after installation: cash, card or Kaspi.
Calculate the costLook at the production, timelines, warranty and who exactly does the measuring and installation.
The price is fixed after measuring.
Warranty on window installation — 5 years, on window repair — 1 year for work and components.
Ask the technician which fixings are suitable for your window profile and floor so that the grille holds securely.
We reply on WhatsApp within 5 minutes, work without days off.
We accept requests every day.
You can order in 17 cities of Kazakhstan.
We deliver and install on windows and doors.
Ask the contractor about the pattern, color and type of leaf before ordering so that the finished grille matches the facade and window.
Four steps from request to the finished grille on the window.

You leave a request, the measurer arrives at a convenient time, takes dimensions and helps choose a pattern.

The grille is welded or forged to your dimensions, and powder-coated if necessary.

The old grille is removed, the opening is cleared for the installation of the new structure.

First the frame is leveled, then fixed, after which the opening of the leaf and the operation of the lock are checked.
Good to know
We make metal window grilles in Kyzylorda to your exact size, with free measuring, delivery and fitting by our own installers. The measurer helps you choose the grille type, bar spacing and fixings for your window, wall and floor. We reply on WhatsApp within 5 minutes and work seven days a week.
The type follows the task — break-in protection, facade appearance, children, a cat. Below are the base options and where each one earns its place.
We fit welded grilles as the strong everyday option, forged grilles where the facade matters, and clear grilles for protection without a heavy look. A welded unit is built from square or round bar joined by welding, so the load sits on a rigid steel grid rather than decorative twists. Forged work costs more time and labour because each element is shaped by hand, and it suits a front elevation where the bar work is meant to be seen. Clear models use thinner bars set wider apart to keep the view and daylight, making the gap the number you check first. A clear unit still needs a real steel frame and proper fixings.
For a ground-floor flat we usually recommend a welded unit with a tighter gap, painted to match the window frame so it reads as part of the facade. Ground level is the first target for entry through a window, so the bar section and fixing points carry more weight than the pattern. A matched finish stops the unit from looking like a cage bolted onto a building. A gap around 10–12 cm keeps a child from slipping through while still letting air and light pass. Ask for the colour to be matched to the profile before painting — one finished after fitting rarely blends as well as one done in the workshop.
| Type | Main job | Best for | Opens for escape |
|---|---|---|---|
| Welded | Break-in protection | Ground floor, doors | Optional leaf |
| Forged | Decorative cover | Facade-sensitive fronts | Optional leaf |
| Clear | Light cover, view kept | Upper floors, courtyards | Fixed |
| Hinged leaf | Access and escape | Any floor with a fire route | Yes |
| Fixed (blind) | Full cover | Utility windows, loggias | No |
| Anti-cat | Cover plus mesh | Flats with pets | Fixed |
The mounting method depends on the wall material, window construction, and floor height. Below we cover both routes and the hardware each requires.
Our measurer chooses between fixing into the opening and fixing over the frame, based on whether the wall is brick, concrete or timber and on the floor level. Masonry takes through-bolts set into the reveal, timber takes coach screws driven into the stud, and lightweight surrounds get Z-brackets spread wider apart. On a ninth-floor balcony the same grille catches far more wind than at ground level, so the anchor spacing is tightened rather than the panel made heavier. Metal window grilles in Kyzylorda are fitted the same way, with anchor spacing matched to wall and floor. On upper floors wind load matters more than panel weight — never downsize anchors to save time.
We fit grilles to windows that are already installed, anchoring to the wall or to the surround rather than drilling through the PVC where the design allows it. A plastic unit with a deep reveal usually takes brackets that clamp the surround, leaving the sealed glass unit and its drainage channels untouched. Timber and aluminium get their own hardware, and the same crew handles all three materials. Measuring and consultation are free, and the measurer comes at a time that suits you, takes the sizes and helps choose the design, mesh and hardware. If the unit is new, order the grille and window together so anchor points can be planned into the reveal.
| Wall / window | Fixing | Note |
|---|---|---|
| Concrete, brick | Through-bolts into opening | Strongest hold |
| Timber frame | Coach screws into stud | Check stud position |
| PVC profile | Frame brackets, no drilling | Keeps profile intact |
| Aluminium | Z-brackets to surround | Avoid thin sections |
| Balcony rail | Clamp or bolt to rail | Check rail strength |
Metal bars on a window serve three jobs: keeping a small child from the opening, keeping an intruder out, and letting the family out in a fire. These goals conflict, so plan them together.
We set bar spacing tight enough that a small child cannot pass through, and the measurer checks the gap against each opening before the grille is made. Spacing is worked out per window, not taken from a catalogue: a wide living-room frame and a narrow kitchen vent get different layouts. On upper floors the same bars also stop a toddler leaning out over the sill. Families across Kyzylorda often ask for the tightest spacing available, and we explain the trade-off. A barrier that is safe for a child but has no opening leaf can trap a family inside during a fire — plan the escape route at the same time as the spacing.
A hinged grille leaf with a lock gives break-in protection and still opens from inside for escape, and we can pair it with window restrictors or locks on the sash itself. The leaf hangs on welded hinges sized to the grille weight, and the lock is operated from indoors only, so nobody outside can release it. Restrictors on the sash limit how far a child can open the window, while the hinged panel stays the route adults use in an emergency. We fit this on ground-floor flats and bedroom windows where both concerns apply. Keep the key where every adult can reach it — a locked escape leaf with a hidden key is a hazard, not a safety feature.
From first message to fixed wall unit, the job runs through four steps: measuring, making, delivery and fitting. Here is what each involves and where decisions matter.
Making, Delivery and Fitting by Our Own Installers We make each unit to the measured dimensions, deliver it and fit it with our own installers, then repair or replace fixings later if needed. The workshop welds or forges the frame, paints it in the colour you picked, and hands it to the same crew that will mount it, so nobody measures twice. Delivery and installation cover grilles on windows and doors alike, and when a fixing works loose or a hinge stiffens, we come back to repair the item and change the fastenings. Book the fitting for a day when someone is home and the window can be left clear.
Dust, wind and sharp temperature swings load the steel, and an untouched grille ages faster. Below is how the finish, routine care and repairs are handled.
We paint the grille frame any colour to match your windows, so the frame reads as part of the window rather than an add-on. The finish goes on before fitting, and the shade is matched against your actual profile rather than picked from a generic chart — white PVC, wood-look laminate and aluminium frames each take a different tint. A powder-coated layer over the welds and corners keeps the steel away from moisture and from the salt that rides in on the wind off the surrounding steppe. A colour match is also easier to keep clean-looking than a dark finish: dust shows far less, and the facade stays visually quiet.
Five decisions shape a grille that stays secure and easy to live with: the job, the fixing, the escape route, the size and the finish.
Installation, safety, materials, approval
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionMost often approval is not required if the grille does not change the appearance of the facade and does not hinder evacuation. Check the rules with your local cooperative or management company: some buildings have restrictions on appearance.
For opening windows, a grille with a hinged leaf on a lock is more reliable: it prevents falling out and does not hinder evacuation. A limiter is simpler in design, but an older child may be able to bypass it.
Yes, the grille is made to the dimensions of the opening, including arched, corner windows and balcony blocks. The measurer will take dimensions and suggest a pattern and fixings for your structure.
Yes, we paint the forged grille with powder coating in the desired color, including to match the facade or window profile. We select the shade during the measuring visit using samples.
With powder coating and regular care, the grille lasts long and does not rust. Inspect the welds and paint chips once a year, and touch up any rust that appears.
Check for any play when pressing, that all anchors are tightened, and that there are no gaps at the wall. The hinged leaf should open smoothly and lock without effort.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp