With coating
Energy-saving glass reflects some of the sun's heat, so the room heats up more slowly. From 15 200 ₸ per m².


With coating
Energy-saving glass reflects some of the sun's heat, so the room heats up more slowly. From 15 200 ₸ per m².

Frosted glass
Lets light in but hides the room from neighbours. A simpler option is film tinting from 5 500 ₸ per m².

Tough glass
Laminated glass or security film keeps shards from flying on impact. Film — from 8 000 ₸ per m².

Tinting
The film cuts glare and protects furniture from fading. We apply it from 5 500 ₸ per m² of glass.

Glass in the door
We replace cracked glass in PVC doors and tighten the hinges so the door doesn't sag. From 22 000 ₸ per m².

5,097 reviews on review sites
The frame and hardware outlast the glass by years. We replace only what's damaged and save on dismantling and finishing.
The unit in the sash is held by glazing beads and setting blocks. If the glass is worn, chipped or cracked, the technician carefully removes the beads, takes out the unit and fits a new one made to the measurer's dimensions.
Kyzylorda has a long hot summer and frequent dust that eventually dulls the glass. That's why many people choose coated glass that lets in less heat, or tinting for windows on the sunny side.

energy-saving unit per square metre
warranty on the unit and work
on-site measuring and consultation
Four common situations in homes, flats and offices in Kyzylorda.

In a private house or near a playground we install laminated glass that doesn't shatter on impact.
Sand and dust leave scratches over the years that can't be polished out; only a new unit helps.
The glass was hit during finishing, and a chip can turn into a crack, so it's better to replace the unit.
Heat and temperature swings crack balcony units; we install new ones in the same frames.
Five options most often fitted during replacement: from cool coated glass to frosted for privacy.
south- and west-facing windows

Reflects some of the sun's heat, so the room heats up less during the day.
bedroom, children's room

Three panes keep the cool longer and noticeably dampen street noise.
loggia, utility room

Two panes, light weight, suitable for spaces where thermal insulation is not needed.
window film

Dims bright light and protects furniture and curtains from fading.
house, ground floor

The protective layer holds shards together and makes glass stronger on impact.
The final price depends on the glass area and the chosen unit; we fix it in the order after measuring.
| Type of work | Price |
|---|---|
| Energy-saving double glazingless heat build-up in the room | from 15 200₸ per m² |
| Double glazing replacement, per m²standard unit by area | from 19 500₸ per m² |
| Double-chamber double glazingquieter and cooler | from 20 000₸ per m² |
| Single-chamber double glazingloggia, utility room | from 12 600₸ per m² |
| Window film tintingsoftens bright sunlight | from 5 500₸ per m² |
| Security film for glassholds shards together | from 8 000₸ per m² |
| Broken glass replacementone pane of the unit | from 8 000₸ per m² |
| Glass replacement in a plastic doorbalcony, terrace | from 22 000₸ per m² |
| Additional glazing beads installationtighter fit | from 1 300₸ per item |
| Sash adjustment with removalif the sash catches the frame | from 4 000₸ per sash |
| Master's visit and inspectionwithout ordering a repair | from 3 600₸ per job |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi
Call a measurerOrder terms for residents of Kyzylorda.
on the new unit and installation work
installation and window check: cash, card, Kaspi
the measurer will come at a time convenient for you
the amount after measuring is fixed and does not increase
if the glass is broken, with a surcharge to the unit price
on WhatsApp to a photo and window question
we accept requests every day
we work across Kazakhstan
From request to new glass.

Send a photo of the window on WhatsApp and describe the task: crack, scratches, heat, or need for privacy.

The measurer measures the glass along the glazing beads, checks the profile, and suggests a suitable glass type.

The unit is made to your dimensions; if the window is broken, we will make and install it within a day with a surcharge.

The master installs the unit, fixes it with glazing beads, and checks the sash movement; then you pay for the work.
Good to know
We handle double glazing replacement in Kyzylorda as a direct contractor, not a middleman. Our own fitters measure for free, swap the sealed unit inside your existing frame, and seal it back in place. Every replacement carries a 3-year warranty, you pay only after installation, and urgent jobs can be finished within 24 hours.
Replacing the glazing and replacing a whole window are two different jobs. Most calls from Kyzylorda end with a new sealed panel, but a few signs point to window repair or fresh installation instead.
The glazing has failed when condensation sits between the panes, the inner glass feels cold to the touch, or a crack runs across the pane, while the frame, hinges and handle still work normally. Look for a white haze along the spacer bar, where the desiccant is saturated and can no longer absorb moisture. A visible gap at the glazing bead or a seal that has shrunk back from the edge lets air and dust into the cavity. Any of these means the glazing replacement is the right call, not a new frame. Fogging that appears only on the room side of the glass is usually a ventilation or humidity issue, not a failed panel, so check the room before ordering a replacement.
We recommend window repair or full installation when the frame is warped, the sash sags and will not close, or the profile itself is cracked, because a fresh glazing dropped into a failing frame will leak again within a season. Our team handles sash adjustment and seal replacement on windows of any manufacturer, including KBE, Rehau, VEKA and Provedal profiles. A sash that drags on the sill can often be fixed by adjustment and a new seal, which costs less disruption than tearing out a sound frame. We back window installation with a 5-year warranty and window repair with a 1-year warranty covering labour and replaced parts, so the choice between the two is settled at the measuring visit rather than guessed from a photo.
Sharp continental swings set the brief here: baking summers, hard winter frosts and dust storms off the steppe. Each of those tests the glazing differently. Below we compare the options by chamber count, coating and sealing, without prices.
| Option | Glass layers | What it does | Where it fits |
|---|---|---|---|
| Single-chamber unit | Two panes | Basic heat retention | Mild rooms, utility spaces |
| Double-chamber unit | Three panes | Holds heat through winter | Living rooms, bedrooms |
| Energy-saving unit | Three panes plus coating | Reflects heat back inside | Cold-facing rooms, north walls |
For dusty, sun-baked streets we steer clients toward a two-chamber build with a tight seal and, where traffic noise matters, a thicker outer pane, because a loose seal lets fine dust settle between the panes. A failed perimeter gasket shows up first as a grey haze in the bottom corner, long before condensation appears. Such glazing also slows heat transfer through the long summer afternoons, so the room holds its temperature after sunset. On a noisy frontage the outer pane carries most of the load. A wider gap between panes cuts noise better than an extra thin pane, so ask which dimension is being adjusted before agreeing to the upgrade.
We walk you through the route from a first message to a finished window: what the measurer checks on site, how long fitting takes, and why payment comes only after the result is in place.
Our measurer comes at a time that suits you, takes the exact size, checks the frame and glazing beads, and helps you pick the glass formula, all at no charge. The visit covers more than a tape measure: the specialist looks at the bead profile, the condition of the seal, the sash alignment and how the frame sits in the opening, then writes the glass build-up into the order. Double glazing replacement in Kyzylorda starts from this step, since a panel cut to a guessed size will not seat properly in a dust-loaded opening. Ask the measurer to note the bead profile and seal condition on the order, because those two details decide whether the new panel sits flush or needs extra sealing.
A warranty only helps when both sides know where it starts and stops. Here is what our three-year cover on glass unit replacement includes, how to inspect a new panel before fitting, and which damage stays outside the terms.
Our three-year warranty on glass replacement covers fogging between the panes, seal failure and fitting faults, while a crack from an impact, a slammed door or a scratch from cleaning is not a warranty case. Fogging inside the covered period is treated as a manufacturing or sealing defect, and the glazing is replaced. Fitting faults — a pane set out of square, a beading gap or a draught along the rebate — are corrected by the same team that installed it. Impact damage, chips from furniture or toys, and scratches from abrasive cleaners fall outside the terms, because they come from use rather than from the product itself. Keep the order slip and note the fitting date, since a claim is settled faster when the glazing can be traced to a specific batch and fitter.
A smashed pane, glazing set into a balcony door, a window of unusual shape — three cases where the usual order of work changes. Here is what to ask before anyone touches the frame.
We can make and fit a replacement glazing within a day when a pane is broken, with a surcharge on the price, so a smashed opening does not stay exposed to the street overnight. The glass is cut and assembled to the measured size the same day, then set into the existing frame, which stays where it is. Until the fitters arrive, tape a sheet of plastic over the opening and keep the room door shut, since a broken pane leaves the rebate exposed to dust and cold. Note the model and thickness of the old panel if the label is still readable — it saves a second visit when the replacement must match an unusual rebate depth.
We replace glazing in balcony doors and in windows of unusual shape or size, and we fit it in winter too, because the work happens indoors and the frame stays in place. Arched, round and trapezoid openings are measured on site against a template, and the new piece is ordered to those dimensions rather than cut from a standard blank. A lower panel takes more knocks than an ordinary window, so a thicker sheet or a tougher glass is worth discussing for the part people push with a knee or a bag. On a door the glazing also carries more weight across a wider span, so the beads and support blocks underneath need checking at the same visit. Ask for the template to be kept with the order: a repeat piece for a shaped opening is then made without a second measuring trip.
A failed panel does not always mean a new window, and the points below sum up what decides the job before anything is ordered or fitted.
Double glazing replacement, energy efficiency, seal, work timelines
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, usually only the unit itself is replaced, while the frame, sashes and hardware stay in place. This avoids replacing the window if the profile and mechanisms are still in working order.
Fogging between the panes means the seal is broken, and such a unit cannot be restored. It is replaced entirely: moisture and haze inside cannot be removed, and over time the glass will hold heat worse.
For a hot climate, a double-chamber unit with energy-efficient coating and sun protection is suitable. The exact glass combination depends on the window and its orientation, and it will be selected during the free measuring visit.
It can be done in a door if the unit is held under glazing beads, and it is replaced the same way as in a window. The measurer will inspect the structure and say whether the unit can be removed without dismantling the door leaf.
Not always: if the seal is elastic and free of cracks, it is left as is. When it has hardened or torn, it is better to replace it right away, otherwise the window will be drafty after the unit is installed.
Replacing a double glazing unit is faster and less disruptive: only the glass unit is changed, while the frame and sashes stay. A full window replacement involves removing the entire window and installing a new one, which takes more time and work.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp