Sash adjustment
Simple compression adjustment — from 3 000 ₸ per sash. Complex with sash removal — from 4 000 ₸.


Sash adjustment
Simple compression adjustment — from 3 000 ₸ per sash. Complex with sash removal — from 4 000 ₸.

Handle replacement
We replace the window handle with a new one — from 2 750 ₸ per item. We select one to match your window profile.

Seal replacement
We replace the seal in windows of any manufacturer — from 1 000 ₸ per linear metre.

Double glazing replacement
We replace double glazing — from 19 500 ₸ per m². Urgent production is possible.

Hinge replacement
We replace hinges and adjust the sash — from 4 750 ₸ per item. The sash stops catching on the frame.

5,097 reviews on review sites
Adjustment, replacement of hardware, seal, double glazing, window sill and drip sill — in one request.
Window repair means restoring the operation of the sash and the airtightness of the contour without replacing the window itself. The technician adjusts the compression and hinges, replaces worn hardware parts, the seal, and if necessary — the double glazing, window sill or drip sill.
Work is carried out on plastic, wooden and aluminium windows.

warranty on window repair and replaced components
technician call-out and measuring within the city
we accept requests daily
From inspection and measuring to checking sash compression — four steps, each takes a few minutes.

The technician checks compression, hinges, handle and seal, and takes measurements of the sash and double glazing.
Adjusts compression and hinges or replaces a worn hardware part, seal, handle.
After adjustment, the technician checks the smooth movement of the handle and the operation of the micro-ventilation mode, so that the sash opens and locks without effort.
If there is a crack or the double glazing has lost its seal, it is replaced — from 19 500 ₸ per m², with an urgent option available.
Five typical problems that people in Kyzylorda contact us about, and what our technicians do about them.
Compression and seal

We adjust compression and replace the seal — from 1 000 ₸ per linear metre.
Hardware

We adjust the hardware, replace it if worn — from 7 800 ₸ per job.
Hinges and adjustment

We adjust the hinges or replace them — from 4 750 ₸ per item.
Handle replacement

We install a new handle to match the window profile — from 2 750 ₸ per item.
Compression, seal, reveal

We adjust the sash, replace the seal, insulate the reveal — from 1 000 ₸.
Services and components with units of measurement; the final amount is fixed in the order after measuring.
| Type of work | Price |
|---|---|
| Call-out and inspection by a technicianwithout ordering a repair | from 3 600₸ per job |
| Simple sash adjustment | from 3 000₸ per sash |
| Complex adjustment with sash removal | from 4 000₸ per sash |
| Window handle replacement | from 2 750₸ per item |
| Hinge replacement | from 4 750₸ per item |
| Hardware repair | from 7 800₸ per job |
| Hardware replacement on sash | from 10 000₸ per sash |
| Seal replacement | from 1 000₸ per linear metre |
| Double glazing replacement | from 19 500₸ per m² |
| Broken glass replacement | from 8 000₸ per m² |
| PVC window sill installation | from 5 500₸ per linear metre |
| Drip sill installation | from 3 250₸ per linear metre |
| Mosquito screen repair | from 2 500₸ per item |
| Air inlet valve installation | from 6 000₸ per item |
Price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi
Calculate repair costEight facts about our work: warranties, measuring, payment and schedule.
for work and replaced components
for double glazing replacement
the measurer will come at a convenient time
we select handles, hinges and spare parts for your profile
we accept requests daily
we reply within five minutes
KBE, Rehau, VEKA, Provedal and others
you can order in 17 cities of Kazakhstan
Four steps from request to work check.

In your request, specify the window type, sash size, nature of the problem (does not close, draft, sagging, broken handle) and a photo — so the master can bring the necessary parts.

The master agrees on the scope of work and fixes the price in the order before repair starts.

The master adjusts the sash or replaces a part, seal, double glazing.

The sash is closed, the seal pressure around the perimeter and handle operation are checked.
Good to know
For window repair in Kyzylorda, we send our own crews, not subcontractors. We handle adjustment, seals, glass units, hardware and draughts on plastic, wooden and aluminium windows, with a free measuring visit, the price fixed in the order after measuring, and payment after installation. Window repair carries a 1-year warranty on labour and replaced parts.
A window rarely fails without warning. It starts to whistle, sweat or catch on the frame long before anything breaks, and each of those signs points to a different job.
A draught under the sash is almost always a worn gasket or a loose clamping setting, and we fix both on the same visit without touching the frame. Rubber hardens and flattens with age, so the leaf no longer presses against the rebate evenly, and cold air finds the gap that opens up. We renew the seal on units of any manufacturer, including KBE, Rehau, VEKA and Provedal profiles, cutting the new strip to the profile rather than forcing a universal strip into it. If the rubber is still soft, the fix is cheaper still: the hinge-side tension is adjusted so the leaf pulls in tighter along its full height. Run a hand along the seal on a cold morning — if the draught follows the whole perimeter, the gasket is gone; if it hits a single corner, the clamping needs adjusting first.
Fog or condensation trapped between the panes means the sealed unit has lost its seal, and we swap the whole glazed panel rather than patch it. Once moisture is inside, the desiccant around the spacer is saturated and the cavity can no longer be dried out, so drilling or resealing the edge only postpones the same fog by a season. A new assembly restores both the clear view and the thermal performance, and the work carries our 3-year warranty on glass unit replacement. The same team can produce and fit a fresh panel within a day on request, with a surcharge added to the part itself. Surface condensation on the room side is a ventilation and humidity issue, not a broken unit — check that first before ordering a replacement.
A sagging leaf that catches the frame is usually corrected by adjusting the hinges, and only worn or bent hardware calls for replacement. Fittings settle under the weight of the panel, and the corner that drops is the corner that scrapes the frame on closing. We reset the hinges, then check the clamping points and the handle mechanism so the leaf closes evenly rather than being forced shut. Fresh hardware is reserved for hinges with play in the pin or a bent arm, where adjustment no longer holds. Sagging rarely appears on its own — it follows a season of temperature swings, so the same visit should check the tension and gasket while the panel is off its hinges.
Not every fault calls for a new unit, and not every frame is worth saving. The line runs through the frame, the profile and the sash — and it is easier to see than it sounds.
If the frame and profile are sound and only the seal, hardware or glass unit has failed, repair is the right call and keeps the original structure in place. A worn gasket, a hinge that no longer pulls the sash tight, a handle that turns loosely — each of these is a part-level fault, and renewing the part restores the unit without touching the surround. A surround that still closes square and holds its shape is worth mending — swapping a healthy one gains you nothing but a bigger bill. We repair plastic, wooden and aluminium units across the city, and the first thing the master checks on site is whether the surround has kept its geometry. If it has, the job stays small.
A warped or rotten surround, repeated failures in the same spot, or a profile that no longer holds hardware are the cases where replacement beats repair. Once the profile itself has lost its shape, new gaskets and new hinges only mask the problem for a season — the leaf still will not sit tight. On older wooden units, weigh the cost of repeated repairs against a single replacement: a surround that keeps failing will keep failing, and each visit buys less time than the one before. Wood that has softened at the corners or swelled out of square cannot be brought back by adjustment. A modern plastic profile, by contrast, holds hardware firmly for years and takes a gasket that stays compressed.
| Situation | Repair | Replace sash | Replace window |
|---|---|---|---|
| Worn seal or draught | Yes | No | No |
| Fogged glass unit | Glass unit swap | No | No |
| Sagging, catching sash | Adjust hinges | If hinges worn | No |
| Warped or rotten frame | No | No | Yes |
| Sound frame, failed sash | No | Yes | No |
Below is what we actually do at the workshop and which frames we do it on — from a simple adjustment through to replacing a worn seal on profiles of any brand.
Adjustment tightens and realigns the hardware you already have, while hardware repair replaces a broken handle, hinge or locking mechanism. Adjustment is the lighter job: the master turns the eccentrics, resets the sash in the frame and restores even pressure along the seal. Hardware repair starts when a part has failed — a handle that spins loose, a hinge that has dropped, a locking bar that no longer catches. On most plastic units these two overlap, because a sash that will not pull in is usually a worn mechanism rather than a misaligned one. If the handle turns but the sash does not pull in, the mechanism is worn and adjustment alone will not hold — the part needs replacing. Both jobs fall under the window repair Kyzylorda residents book most often, so the master checks the hardware before deciding which one is due.
We replace the seal on units of any manufacturer, including KBE, Rehau, VEKA and Provedal profiles, when the rubber has hardened or flattened. The seal is the soft loop that runs around the sash and frame and takes the draught when the unit closes; once it loses its spring, no amount of pressure adjustment brings it back to tight. We match the profile rather than forcing a generic strip into the groove, so the new loop sits flush at the corners and along the hinge side. A seal that has gone hard in the cold will not spring back — if it stays flattened after you press it, replacement is due, not another adjustment.
We repair plastic, wooden and aluminium frames, including loggia, veranda and gazebo glazing, so a wooden or aluminium frame is not a reason to be turned away. Plastic sashes take standard hardware and seals; wooden frames need the fit checked against a frame that may have moved with the seasons; aluminium loggia glazing uses a slimmer hardware set and thinner seals than a room unit. On hinged door screens we fit Economy 32×10 mm or Prestige 42×17 mm profiles, and the measurer picks Z-brackets, pins or magnets to suit the profile and the floor. Aluminium loggia glazing behaves differently from room units — the hardware and seals are a different set, so tell the measurer it is a loggia when you book.
From the first message to the final check, here is what happens at each step, how much time the work takes and how to prepare your home before the master arrives.
We reply on WhatsApp within 5 minutes, work seven days a week, and the measuring visit is free and booked at a time that suits you. The measurer takes exact sizes, checks the profile, the moving panel and the seal, and helps you choose parts and fixings for your unit type. He also looks at the floor level and the fittings, because those decide whether a Z-bracket, a plunger pin or a magnet is the right hold. Once sizes are confirmed, the order is written up with the scope and parts listed. Send a photo of the problem with your first message — it lets us bring the right parts and often saves a second visit.
Most adjustment and seal work is done in front of you on the same visit, and the price is fixed in the order after measuring before anything starts. The master checks alignment, tightens or replaces the hardware, and swaps worn seals on units of any manufacturer, including KBE, Rehau, VEKA and Provedal profiles. Adjustment is usually quick, while a seal replacement or a glass unit swap runs longer because the moving part has to come out and go back true. A framed screen made to your size is ready in 10–15 minutes, a pleated one in 40–60 minutes, and urgent glass unit replacement is done within one day at a surcharge. Clear the windowsill and the floor by the opening beforehand — it speeds up the job and keeps dust off your things.
Fine dust, summer heat and sharp swings between seasons age the rubber seal and hardware faster than in milder climates. Here is what that wear looks like and how to slow it down.
Fine dust works into the rubber seal and hinges, and the swing between hot summers and cold winters hardens the material faster than in milder climates. Grit acts like sandpaper each time the leaf opens, while the flexible band loses elasticity and stops springing back against the frame. Hardware suffers the same way: dust thickens the grease in the hinges, the handle starts to resist, and the leaf sits slightly off its line. Once that happens, the unit no longer closes with one light push, and the gap at the corner lets warm air escape in winter. A gasket that looks fine can still be flat where it meets the frame — check the contact line, not the visible face, when judging wear.
A check before each season — gasket, pressure and hardware — catches wear early and keeps a unit out of the repair queue. In our practice, most calls that arrive after the first cold snap come from a sealing band that had already flattened in summer, when nobody noticed the draught. We handle insulation and slope repair, and both start with the same step: a master runs a hand along the contact line, tests the handle tension and looks at how evenly the leaf presses the frame. A small adjustment at that point restores the fit; left alone, the same unit needs a full replacement of the worn element. The cheapest repair is the one you book before the cold sets in, when a small adjustment is all it needs.
When a unit has been adjusted more than once and still draughts, the gasket or hardware has worn past adjustment and needs replacing. We fix draughts on plastic, wooden and aluminium frames, and the first visit usually tells us which of the two is at fault: a leaf that presses evenly but still leaks points to the flexible band, while one that sits crooked points to the hinges and the locking points. Adjusting a compressed profile buys a few weeks at most, because it no longer fills the gap it was cut for. Repeated draughts in the same corner usually point to a compressed seal, not a bad adjustment — replacing it fixes what adjusting cannot.
Warranty terms, payment timing and the gap between a direct contractor and a middleman decide whether a repair holds or has to be redone. This section covers all three in plain terms.
| Job | Warranty |
|---|---|
| Window repair (labour and parts) | 1 year |
| Glass unit replacement | 3 years |
| Window installation | 5 years |
| Mosquito screens | 1 year |
We fix the price in the order after measuring, and you pay after installation by cash, card or Kaspi. The site visit itself is free: the measurer arrives at a convenient time, takes the sizes and helps choose the seal, hardware and fixings, so the order sheet lists real tasks on a real sash rather than a guess. That fixed figure then holds for the whole job — parts, labour and the call-out included. A quote given only over the phone, before anyone has seen the sash or the frame, is the one most likely to grow once the master is on site and starts opening the unit up. In our experience, the written figure is the only one worth planning around, because it is tied to measurements rather than to a rough description.
A few rules hold across every problem with a frame, whatever its type and whatever the season. Here is the short version to take away.
Repair, adjustment, double glazing replacement, wooden windows
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, in most cases this is solved by repair: the technician loosens the fixings, aligns the sash and readjusts the hinges. Replacement is only needed if the frame or profile is deformed, which an on-site inspection will determine.
First check the seal: if it is elastic and intact, adjusting the compression with eccentrics is enough. When the rubber has hardened or torn, it is replaced, and often both tasks are done together so the window holds heat again.
Yes, the double glazing is replaced separately: it is removed from the sash, a new one is installed and secured with glazing beads. The frame and hardware stay in place if they are in good condition.
Yes, we repair wooden windows: we tighten the sashes, replace hinges, handles and seals, and work on the double glazing if needed. If the frame and sash geometry are intact, there is no need to replace the window with plastic.
Most likely the hardware has shifted or worn out: the cams do not engage the strike plates, or the handle mechanism is broken. Do not press harder on the sash; a technician on site will identify the cause and adjust or replace the parts.
No, such double glazing cannot be repaired: the seal is broken and moisture between the panes will remain. Only the double glazing is replaced, while the frame and sash usually stay; the technician will take measurements and install a new one.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp