Craftsman repairing the handle of a wooden window
from 18 000 ₸ per m²Restoration with materials; the master will come at a convenient time, measuring is free.Calculate

Wooden Window Repair in Kyzylorda

Insulation · Swedish technology

Window insulation

Seal around the sash perimeter, price from 4 200 ₸ per linear meter, master's visit and inspection are free in Almaty.

Technician holds a roll of soft, flexible grey rubber seal
GoogleYandex MapsZoon

5,097 reviews on review sites

What wooden window repair includes in Kyzylorda

A wooden window consists of a frame, sashes, glass, glazing beads and hardware; repair restores these elements to working condition.

How the service works

A wooden window is assembled from frame and sash bars, glass is held by glazing beads, opening is ensured by hinges and handles. Repair includes restoring sash geometry, protecting the wood and replacing worn parts.

The master works on site: removes old paint, strengthens joints, installs new glazing bead or glass. The work uses a chisel, plane and sander, as well as antiseptic, paint and sealant.

Honey-coloured wooden window with two sashes: frame, glass, hinges and a handle
from 18 000 ₸

restoration with materials per m²

from 16 000 ₸

minor frame repair per job

1 year

warranty on work and components

5 services
InsulationPaintingGlassHardwareGlazing bead

How wooden window faults are fixed in Kyzylorda

The master assesses the condition of wood, glass and fasteners and selects a restoration method for the specific fault.

Technician applies varnish to a wooden window frame with a brush
  • 01Rotten bottom of the sash

    The damaged wood section is cut out and replaced with new, then treated with antiseptic.

  • 02Swollen sash

    The swollen sash is adjusted to the opening so it closes without effort again.

  • 03Peeling paint

    The old coating is sanded and new paint is applied, protecting the wood from moisture.

  • 04Cracked glass

    Broken glass is carefully removed and new glass is installed, secured with glazing bead.

  • 05Fallen glazing bead

    The glazing bead is put back in place or replaced so the glass holds securely.

  • 06How glass replacement differs from double glazing replacement in a wooden frame

    In a wooden frame, the glass is secured with glazing beads and sealant, so replacing the glass involves removing the beads, taking out the old glass, installing the new one and fixing it in place. Replacing the double glazing unit (if the frame allows) requires removing the sash and installing a ready-made unit, which changes the structure. The technician will clarify which option suits your frame.

Types of wooden window restoration services

Choose the work based on your window's condition: from local part replacement to full frame restoration with insulation.

Insulation

Swedish technology

Technician holds a roll of soft, flexible grey rubber seal

Seal around the sash perimeter reduces draughts, price from 4 200 ₸ per linear metre.

from 4 200 ₸/linear m

Hardware

Handles and hinges

A craftsman holds a new metal window handle in his hand, shiny and sturdy

Replacing worn handles and hinges restores smooth sash movement, from 1 150 ₸ per piece.

from 1 150 ₸/piece

Seal

Between frames

Hands inserting a new seal into the groove of a wooden window sash

Self-adhesive seal is fitted between the frames to protect against draughts, from 2 800 ₸ per window.

from 2 800 ₸/window

Balcony block

With adjustment

Wooden balcony unit with a window and a door in light-colored frames

Repair of a wooden balcony block with adjustment of sashes and door, from 53 500 ₸ per piece.

from 53 500 ₸/piece

Restoration

Sanding and painting

Wooden window after restoration with fresh varnish on the frames

Full coating renewal with materials brings the frame back to a neat look, from 18 000 ₸ per m².

from 18 000 ₸/m²

Wooden window repair prices in Kyzylorda

The price list shows work units and options; the final cost is confirmed by the technician after measuring.

Type of workPrice
Wooden window restoration (sanding, painting)materials includedfrom 18 000₸ per m²
Painting a wooden windowwithout sandingfrom 8 100₸ per window
Repair of wooden window framesminor repairsfrom 16 000₸ per job
Repair and insulation of a wooden windowwith insulationfrom 28 000₸ per window
Repair of a wooden balcony blockwith adjustmentfrom 53 500₸ per unit
Replacement of wooden window hardwarehandles, hingesfrom 1 150₸ per unit
Insulation of a wooden window using Swedish technologywith sealfrom 4 200₸ per linear meter
Installation of inter-frame sealself-adhesivefrom 2 800₸ per window
Replacement of broken glassfrom 8 000₸ per m²
Master's visit and inspectionwithout ordering a repairfrom 3 600₸ per job

The price list shows units of work, and the final set of items depends on the window's condition.Ask the technician during measuring how the price list units (per m², per job, per parts) relate to the scope of work.Tell the technician the window parameters in advance (number of sashes, glass size, hardware type) so the price list can be applied more accurately.

Check repair cost

Why customers order wooden window restoration from us in Kyzylorda

Facts about the company that matter when ordering wooden window repair.

Repair warranty1 year

for work and replaced parts

Measuring and consultation0 ₸

the measurer will come at a convenient time and take dimensions

Experiencesince 2012

we work across Kazakhstan

Coverage17 cities

you can order in 17 cities of Kazakhstan

WhatsApp response5 minutes

we reply within 5 minutes

Workingno days off

we accept requests every day

Price fixationin the order

the price is fixed after measuring

Paymentafter

cash, card or Kaspi

How wooden window repair is carried out in Kyzylorda

Four steps from request to checking the result.

  1. Hand holding smartphone by wooden window, ceramic vase on windowsill nearby
    01Request

    You leave a request

    Describe the problem on WhatsApp or by phone — we reply within 5 minutes.

  2. Tape measure stretched along wooden window sash during measurement before repair
    02Inspection

    Technician inspects the window

    The technician checks the wood, glass, glazing beads and hardware, asks the owner how long ago the squeaking, draughts or cracks appeared, and chooses the repair method.

  3. A workbench with tools, sandpaper, paint and sealant for window repair
    03Work

    We carry out the repair

    The technician sands, paints, replaces glass, glazing beads or hardware on site.

  4. Repaired wooden window with fresh white paint: one pane per sash, brass hinges
    04Check

    You check the result

    Sashes open and close, glass is secure, no draughts.

Good to know

Wooden Window Repair in Kyzylorda from Our Own Crew

Wooden window repair in Kyzylorda from us is done by our own crew, not a middleman. We fix sagging sashes, replace weatherstrip and glass units, insulate draughty frames and repaint tired wood, with free measuring, a price fixed after the visit and a 1-year warranty on repair work and replaced parts.

Repair or Replace Your Old Wooden Window

The decision comes down to the state of the wood and the geometry of the sash, not to how old the window looks. Owners should settle this before any work is quoted.

When a wooden frame is still worth repairing

We repair a wooden window when the frame is sound and only the moving parts and seals have worn out, so the sash, glass and hardware can be brought back without a new unit. Typical candidates are leaves that have dropped on their hinges, dry but straight wood, and thinned paint over hard stock. Restoration covers fresh weatherstrip in the rebate, adjusted hinges, sanding, antiseptic treatment and repainting in the colour you choose. Wooden window repair in Kyzylorda owners ask about most often starts here, with a structure that only needs its fittings and finish renewed. A straight, dry frame almost always outlives its first set of hinges and seals, so judging by the wood itself rather than by appearances saves the owner a full replacement.

Signs it is time to replace rather than repair

  • Soft corners: a screwdriver sinks into the joints, which means moisture has reached the core.
  • Deep splits: cracks run along the grain through the full section, not just in the paint.
  • Twisted sash: the leaf no longer sits flat in the rebate and drags along one edge.
  • Crumbling sill: the lower beam breaks away in flakes, leaving nothing solid for weatherstrip.
  • Repeat damp: the same corner swells and sticks each season, so the wood has lost its shape.

Why Wooden Windows Let in Draughts and How We Stop It

Draughts in a timber window almost never come from the glass itself. Cold slips through the perimeter of the sash, dried-out weatherstrip and slack hinges, and that is exactly where a repair delivers a fast, visible result.

Where the cold actually gets in

Most draughts come through the gap between sash and frame, worn weatherstrip and loose hinges, while condensation on the glass usually means warm moist air is escaping past those same seals. Timber shrinks and swells with the seasons, so a sash that closed tightly two winters ago can leave a 1–2 mm gap along its edge once the wood dries. Hinges loosen under the same movement, and the leaf starts to sit at a slight angle, pressing hard on one corner and opening a slit on the opposite one. The gasket, squeezed flat against the rebate, stops springing back and lets the cold pass straight through. If the inner pane stays wet in frosty weather, the seal line is the first place to check, because trapped moisture there leads to mould on the timber long before the glazing itself is at fault.

Insulating a wooden window for a Kyzylorda winter

We insulate a timber window by renewing the weatherstrip, sealing the sash perimeter, adjusting the hinges so the sash closes tight and treating the wood so it does not dry out and shrink over the winter. The gasket is cut out of the rebate and replaced with one that springs back, gaps along the closing edge are closed, and the hardware is re-aligned so the sash sits square. An antiseptic and protective coat keeps the timber from drying in the heating season, and we check the slopes, where a cold bridge shows up as damp patches. Sealing without adjusting the hinges only presses a worn sash harder against the frame, so the two steps have to be done together or the draught simply moves to the next gap.

What a Wooden Window Repair Covers Step by Step

Timber is worked on directly rather than swapped out like a plastic profile. A wooden window repair kyzylorda follows a joiner's order: seal, hardware, timber, finish — each stage tackling a different cause of draughts, sticking and rot.

Weatherstrip, hinges and sash geometry

We cut a fresh groove and set new weatherstrip into the sash, then adjust the hinges and hardware so a sagging leaf stops catching and closes evenly against the frame. The old seal is often compressed flat after years of sun and frost, so it no longer presses against the rebate and cold air slips past it. New hinges and a careful adjustment restore the geometry of a sash that has dropped on worn pins. We change the seal on windows from any manufacturer, including KBE, Rehau and VEKA frames, and match the profile to the existing groove width. A sash that drags on the sill is usually a hinge problem rather than a warped frame, so adjusting the hardware first often avoids the cost and mess of reworking the timber.

Sanding, treatment and repainting the frame

  • Sanding: we strip the loose, chalky coating back to sound timber on the sash, frame and rebates, not just the face you see from the room.
  • Treatment: bare timber and any dark soft spots get an antiseptic primer that soaks in and slows rot before the topcoat goes on.
  • Sealing joints: we work finish into the corners, edges and glazing rebates where water collects and paint usually wears through first.
  • Repainting: two coats go on the prepared surface so the frame sheds rain and snow melt instead of soaking it up.
  • Aftercare: check the seal and paint every couple of seasons and touch up any crack before damp reaches the material underneath.

How repair differs from plastic

Wood is repaired by working the material itself, cutting a new seal groove, sanding and refinishing, while plastic is mostly a matter of swapping sealed units and adjusting hardware that clips apart. A timber sash that sags usually drops on worn hinges and lost geometry, so the joiner rehangs and re-aligns it rather than replacing a profile. Plastic frames are hollow chambers with steel reinforcement, and a repair there means new gaskets, a fresh glass unit or a replacement sash. Wood is solid through its thickness, so a groove can be re-cut and a corner re-glued on site. Because timber moves with the seasons, a repair has to leave a little room for that movement, and a seal fitted too tight will split at the first cold snap.

A Glass Unit and Hardware in an Old Wooden Frame

A glass unit or a set of fittings can be replaced in a wooden window without touching the frame, provided the sash and its rebate are still sound. This usually takes less time than swapping the whole window.

Replacing the glass unit without touching the frame

We replace the glazing in an old timber frame by lifting out the failed unit, checking the rebate and fitting a fresh one, so the frame and the look of the window stay exactly as they were. The sash comes out, the beads are eased off, and the rebate is cleaned and checked for rot or movement before anything goes back in. If the wood is sound, the new pane sits in the same opening. Our glazing swap carries a 3-year warranty, and an urgent unit can be produced and fitted within a day at a surcharge. A failed pane shows up as fog sealed between the layers, and once that happens the glass cannot be dried out, so only a replacement restores a clear view.

Hardware that suits old wooden sashes

Matching replacement fittings to old timber
What we changeWhat we match it toWhat we check
HingesLeaf weight and thicknessScrew holes in the wood
HandlesExisting spindle and lockFree movement of the leaf
Locking hardwareRebate and frameShut line along the seal

Booking a Visit, Timing and the Warranty

A visit, a locked price and a written guarantee separate a direct crew from a middleman. We keep all three visible from the first call, before any tool comes out of the van.

Free measuring and a price fixed before work starts

Our measurer comes at a convenient time, takes the sizes and helps choose the work, and the cost is locked in the order after measuring, so nothing shifts when the job begins. The consultation costs nothing, and the appointment is booked around your schedule, evenings and weekends included. The specialist inspects the frame, the sashes and the glass unit, then agrees with you what actually needs doing — a full repair, a partial one, or just hardware. A quote given over the phone before anyone has seen the window is only a guess, and the number that holds is the one recorded on paper once the timber has been measured on site. Ask for that document before the crew unpacks a single tool.

How long the work takes and what the warranty covers

  • Single visit for most repairs: a timber window is usually finished the same day, and we work seven days a week.
  • 1-year repair warranty: it covers both the labour and every part we replaced, written into the same order.
  • Payment after the work: you settle once the window is back in place, by cash, card or Kaspi.
  • Written terms: the guarantee and the agreed cost sit together, so there is nothing to argue about later.
  • Clear scope: the order lists exactly which parts are new and which are reused, so a patch cannot pass for a repair.

What to look at in wooden window repair without removal

Old timber joinery rarely fails all at once, so the decision usually comes down to one or two worn parts. The points below summarise what matters most before any work begins.

  • Repair beats replacement while the timber is solid: loose hinges, tired seals and flaking paint cost far less to put right than a whole new window.
  • Draughts come through the seals and sashes: fresh weatherstrip and a re-hung sash close most of the cold that reaches a flat in winter.
  • New glazing fits an old surround: a sealed unit can go into the existing opening without disturbing the wood around it.
  • Free measuring settles the price up front: sizes and fixings are confirmed on site, so nothing changes once work starts.
  • Cover differs by job type: repairs carry a one-year guarantee on labour and replaced parts, glazing replacement carries three years.

Questions about wooden window repair in Kyzylorda

Insulation, seal, mosquito screen, sash repair

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can an old wooden window be insulated without replacing it so it doesn't let in drafts in winter?

Yes, insulation without replacing the window is possible: we renew the seal around the perimeter, seal the joints and adjust the sash pressure. If the wood is intact, this is enough to stop drafts in winter.

02Which seal is best for wooden windows in the hot climate of Kyzylorda?

For heat, silicone or EPDM is better: they don't dry out and stay elastic longer. The technician will select a profile for your frame and sash gap.

03Is it really possible to install a mosquito screen on a wooden window and which fixing should I choose?

Yes, we install screens on wooden frames: usually with Z-shaped brackets or plungers so the wood isn't damaged. The measurer will choose the fixing for the profile and floor level.

04Can a wooden window be repaired if the sash has sagged and sticks?

Yes, we repair a sagging sash: tighten the hinges, replace worn hardware and restore the geometry. If the wood hasn't rotted, there's no need to replace the window.

05How can I tell if a wooden window needs restoration rather than just adjustment?

If the sash only sticks or doesn't press tightly, adjustment is usually enough. Restoration is needed when the paint has peeled, the wood has dried out or cracks and rot have appeared — the technician will determine this during inspection.

06Do I need to remove the wooden window to repair the sash?

In most cases no: adjustment, seal replacement and glazing bead work are done on site. The sash only has to be removed for major overhaul or glass replacement, and the technician will say so after inspection.

Reviews of wooden window repair in Kyzylorda

5,0based on 97 reviews on platforms
All reviews