Pressure and hinges
Tightening the pressure and hinges is from 3,000 ₸ per sash. A simple adjustment takes little time.


Pressure and hinges
Tightening the pressure and hinges is from 3,000 ₸ per sash. A simple adjustment takes little time.

Restoration
Mechanism restoration is from 7,800 ₸ per job. The technician will choose parts to suit your profile.

New handle
Window handle replacement from 2,750 ₸ per piece, for a standard handle.

Seal
We replace the seal in windows from any manufacturer, from 1,250 ₸. Ask the technician for details.

5,097 reviews on review sites
Plastic window repair is the restoration of the mechanisms responsible for opening, pressure and the tightness of the sash.
In a plastic window the hardware, hinges, scissor arms, handles, pressure points and seal all move and wear. Repair restores smooth movement and a tight fit of the sash without replacing the window itself.
The warranty on window repair is 1 year on work and replaced parts.

warranty on work and replaced parts
measuring and consultation before work begins
we take requests every day
The technician arrives with tools and parts, inspects the sash and fixes the cause of the fault on site.

The van carries a set of tools for adjusting and fitting hardware, lubricant, fasteners and common spare parts: handles, pins, hinges, seals. Rarer parts for a specific hardware model are brought by the technician after the profile is confirmed.
Selects parts for your profile and hardware model so they fit without modification.
Adjusts or replaces mechanisms without removing the window, keeping the frame and the double glazing unit.
Checks all opening modes and the pressure, then shows you how the sash works after the repair.
Below are the typical faults people call us about most often. From the symptom, the technician will choose the work and parts.
Handle won't turn

The mechanism has jammed or parts are worn. The hardware needs repair or replacement.
Sash opened in two modes

The window lock or scissor arm has slipped. The lock and scissor arm need repair.
Tilt-and-turn mechanism

A mechanism part has failed. The technician will replace the scissor arms with compatible ones.
Catches on the frame

The hinges have loosened or are misaligned. Adjusting the hinges will help.
Draughts and condensation

The compression is off or the seal has worn out. Compression adjustment and seal replacement are needed.
Guidelines by type of work; the exact price is fixed after measuring.
| Type of work | Price |
|---|---|
| Simple sash adjustmenttightening the pressure and hinges | from 3 000₸ per sash |
| Sash adjustment with removala complex case; the sash is removed | from 4 000₸ per sash |
| Balcony door adjustmentdoor leaf and pressure | from 6 000₸ per pc |
| Hardware repairmechanism restoration | from 7 800₸ per job |
| Sash hardware replacementfull set per sash | from 10 000₸ per sash |
| Scissor arm or angle switch replacementa part of the tilt-and-turn mechanism | from 5 500₸ per pc |
| Pin or strike plate replacementpressure components | from 1 300₸ per pc |
| Hinge replacementsash support parts | from 4 750₸ per pc |
| Window handle replacementfor a standard handle | from 2 750₸ per pc |
| Conversion to tilt-and-turn openingchanging the opening layout | from 19 000₸ per sash |
| Converting a fixed window into an opening onefitting the sash into the frame | from 28 000₸ per sash |
| Installation of a micro-lift or extra pressure pointadditional hardware | from 1 700₸ per pc |
| Opening a locked sashwithout damaging the hardware | from 2 400₸ per sash |
| Hardware cleaning and lubricationprevents sticking | from 1 250₸ per sash |
The price is fixed in the order after measuring.Measuring and consultation are free.Payment after installation: cash, card or Kaspi.
Check the priceFacts about the company: warranty, work with profiles from different manufacturers, payment after installation.
for work and replaced components
for window installation
for double glazing replacement
we replace it in windows from any manufacturer
we take requests without days off
or Kaspi
the price is fixed in the order
we select parts and paint to match your profile
Four steps from request to checking the result.

Tell us what happened to the sash: the handle sticks, the sash has sagged or there are draughts around the perimeter.

We will agree on a convenient day and time for the technician's visit.

Before starting the repair, the technician will outline the options for your fault, and together you will fix the chosen scope of work.

After the visit, ask the technician how to care for the adjusted sash in the first days.
Good to know
Centre Okon handles the pvc window repair petropavlovsk homeowners call about most: draughts, sagging sashes, worn seals and fogged glass units. Our own fitters diagnose the window on site, replace the seal matched to your KBE, Rehau or VEKA profile, and back the work with a 1-year repair warranty and a 3-year warranty on glass unit replacement.
A draught, a stiff handle and fogged glass are three different faults. We start by matching the symptom to the part, so the fix targets the cause and not just the noise.
Cold air creeping under a closed leaf usually means the gasket has flattened or the leaf has dropped out of line, and we tell the two apart by running a hand along the rubber and checking the gap at the hinge side. On a KBE, Rehau or VEKA profile the gasket sits in a groove around the whole perimeter, so one flattened stretch near the handle is enough to pull a chill across the sill. We measure the opening at three points — hinge, centre and handle — before quoting, because a dropped leaf will not hold a fresh strip for long. If the opening is even all round but the rubber feels hard and shiny, replacing it is enough; if it widens toward the handle, the leaf needs re-hanging first.
| What you notice | Likely cause | What we do |
|---|---|---|
| Cold air along the sash | Seal flattened or sash dropped | Reseal or re-hang |
| Handle stiff or loose | Worn hardware | Adjust or replace the fitting |
| Sash catches the frame | Geometry out of line | Realign the sash |
| Mist inside the glass | Sealed unit lost its seal | Replace the unit |
From the first WhatsApp message to the final check, the visit follows the same order every time. Here is what happens, who comes, and how long each stage takes.
We reply on WhatsApp within 5 minutes, book a free measuring visit at a time that suits you, and the fitter diagnoses the window on site before any work starts. That first visit covers more than a tape measure: the measurer takes exact sizes, helps you choose the seal and fittings, and confirms which fault is causing the draught or the sticking handle. Because the diagnosis happens in front of the window, the repair is agreed on the spot rather than over the phone. Payment comes after the work is done — cash, card or Kaspi — and the price is fixed in the order once measuring is complete. The measuring visit is where the fix is decided, so the fitter arrives with the common seals and fittings rather than making a second trip for a standard repair.
| Stage | What happens | Timing |
|---|---|---|
| First message | We reply and agree a visit | Within 5 minutes |
| Measuring visit | Sizes taken, fault confirmed | At your chosen time |
| Standard repair | Seal or hardware work on site | Same visit |
| Glass unit swap | Unit made and fitted | Within one day if urgent |
A seal is not a universal strip. It is matched to the profile and the maker, which is why the same window brand can take a different seal from the one next to it.
We replace seals in windows from any maker, including KBE, Rehau, VEKA and Provedal, because the seal is chosen to fit the groove of that specific profile. Each system runs a different groove depth and lip shape, so a Rehau seal will not sit correctly in a VEKA frame even when the two windows look identical from the room. Our fitters carry the common sections and cut the length on site, then press the lip into the groove by hand to check it holds along the full perimeter. A strip that is close but not exact will hold for a few months and then flatten unevenly, which is why the profile name is the first thing the fitter checks.
A fresh gasket restores the airtight line along the leaf and is often the whole fix for a draughty window, but it will not correct a leaf that has dropped or a handle that no longer locks. The rubber or EPDM lip presses against the frame and closes the gap that cold air travels through, and along the hinge side it also stops the fine dust that collects on the sill. What it cannot do is pull a sagging corner back into square or tighten a locking cam that has worn — those are fitting jobs, not sealing jobs. Swapping the rubber without checking the leaf alignment is the most common reason a window is draughty again by the next cold spell.
The warranty is the part most people forget to ask about until something goes wrong after a pvc window repair in Petropavlovsk. Here is exactly what is covered, for how long, and how payment works.
We give a 1-year warranty on window repair that covers both the labour and the parts we swapped, and a 3-year guarantee on glass unit replacement. Window installation carries a 5-year term, so a full unit swap and a fitting job sit on different conditions. A fresh gasket, a replacement handle and a changed pane are three separate lines on the order sheet, each with its own coverage window. The clock starts from the day the fitter finishes, not from the day you first called. Keep that sheet, because coverage runs from the items listed on it, and a fresh gasket and a changed pane carry different terms. Photograph the document and store it with the window papers — a fitter asked to honour a claim reads those lines first.
You pay after the work is finished, by cash, card or Kaspi, and the price is fixed in the order once the measuring visit is done. The measuring and the consultation cost nothing, and the measurer comes at a time that suits you, takes the sizes and helps choose the gasket and the fittings. Because the figure is set after measuring, the amount you agree is the amount you pay, with no add-ons appearing once the fitter is already at the window. If the job needs a part that was not on the original list, we say so before fitting it, not after. Our team replies on WhatsApp within five minutes, and we are open seven days a week — handy when a fault shows up on a Sunday and you want to know what a repair will involve before anyone arrives.
Some jobs are a five-minute adjustment and some are a trap for a home toolkit. This section covers the safety fittings we install and where a do-it-yourself repair stops being worth the risk.
We fit window restrictors, blockers and locks that let a window open for air but not wide enough for a child to fall through, and the fitter matches the fitting to your profile. The choice depends on the opening type, the direction the leaf swings and the material of the frame, so a plastic tilt-and-turn unit and an aluminium slider take different hardware. On site the fitter checks the hinge side, the handle position and how far the panel travels before drilling anything. Households with toddlers usually ask for a restrictor on the kitchen and bedroom units and a lock on the balcony door. A restrictor chosen for the wrong profile can be forced or left unfitted, so the fitting is picked on site rather than bought blind from a shelf.
A handle that has worked loose can often be tightened with a screwdriver, but a dropped leaf or a gasket that has gone hard needs the right part and the right alignment. Draughts along the hinge side, a handle that catches, or a panel that scrapes the frame are signs the hardware has shifted rather than worn out. Cleaning the drainage channels and wiping the rubber twice a season keeps a unit closing smoothly and delays replacement. Once the gasket feels brittle or the window sits visibly out of square, a fitter checks the alignment and the rubber together, since a new strip on a crooked unit still leaks. Turning the adjustment screws without knowing which way the sash needs to move is how a small draught becomes a hardware replacement.
A short recap of what decides the outcome of a window repair: the fault, the parts, the visit and the cover that follows the work.
Faults, adjustment, replacement, warranty
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionIf the sash won't stay closed and the handle won't turn, don't force it — the mechanism may jam completely. Until the technician arrives, leave the window in the position where it holds and cover the sash to block drafts. The technician will open the hardware on site and restore closing.
A sagging sash is leveled by adjusting the hinges: tighten the lower hinge and set the sash against the frame so it doesn't catch. Do this yourself only if you know the hardware model, otherwise the misalignment gets worse. The technician will set the sash and check the seal around the perimeter.
Yes, the double glazing can be replaced separately: the frame and sash stay in place, only the glass unit is changed. This is done if the glass is cracked or fogged inside between the panes. The new double glazing is selected to match the size and profile of your window.
If drafts come from under the sash around the entire perimeter, but the handle closes tightly without play, the seal is most likely worn out. When the sash catches the frame or the handle turns loosely, the problem is in the hardware. The technician will determine the exact cause during inspection.
On an old window, the hardware is usually replaced without changing the frame and double glazing. If the profile and double glazing are intact, repair is often enough rather than a new window. The technician will assess the condition of the sash and tell you what can be restored.
Yes, in Petropavlovsk service companies repair plastic windows and usually provide a warranty on the work. Our warranty on window repair is one year for the work and replaced components.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp