Double-chamber
Three panes with two chambers: no frost builds up at the edge, and no cold drafts from the window. From 20 000 ₸ per m².


Double-chamber
Three panes with two chambers: no frost builds up at the edge, and no cold drafts from the window. From 20 000 ₸ per m².

Energy-saving
An invisible coating on the glass reflects heat back into the room, so heating runs more efficiently. From 15 200 ₸ per m².

Soundproof
Panes of different thickness dampen traffic noise, ideal for a kitchen or bedroom by the road. From 19 500 ₸ per m².

Glass in a door
We replace the glass in a balcony or entrance PVC door and adjust the hinges after replacement. From 22 000 ₸ per m².

Security film
The film holds shards if a ball or stone hits the glass. Applied from 8 000 ₸ per m².

5,097 reviews on review sites
In a city with a long winter, a window must hold heat. A new unit in the old frame solves this without dismantling.
Cold through a window usually comes from the glass, not the frame. If the unit is single-chamber, fogged up inside or cracked, the technician removes it from the sash and installs a new one of the same size but with better properties.
Winters in Petropavlovsk are long and snowy, with severe frosts. That's why for living rooms we almost always recommend a double-chamber unit or coated glass, and leave single-chamber for unheated balconies.

double-chamber unit for winter
warranty on double glazing replacement
measuring and unit selection
The four most common reasons for requests.

In frost, a crack grows quickly and lets cold in, so it's better to replace the unit while the glass holds.
Streaks between the panes mean moist air is getting inside, and such a unit can no longer be restored.
We urgently make a unit to size and install it in a short time; a surcharge applies to the double glazing price.
We replace a single-chamber unit in a living room with a double-chamber one, and the glass stops freezing.
Five options to choose from when replacing: from the warmest to a simple one for the balcony.
all living rooms

The warmest option for severe frosts, no frost builds up on the glass.
corner rooms

Energy-saving glass reflects radiator heat back into the room.
windows facing the road

Panes of different thickness dampen traffic noise and also hold heat.
cold balcony

Two panes for unheated spaces where light and snow protection matter.
balcony, porch

Glass for a plastic door of the required thickness, so the door does not sag.
The final price depends on the area and the chosen unit; it is quoted after measuring and recorded in the order.
| Type of work | Price |
|---|---|
| Double-chamber double glazingthe main choice for a long winter | from 20 000₸ per m² |
| Energy-saving double glazingkeeps the heat from radiators | from 15 200₸ per m² |
| Double glazing replacement, per m²standard replacement | from 19 500₸ per m² |
| Single-chamber double glazingfor cold rooms only | from 12 600₸ per m² |
| Broken glass replacementif the second pane is intact | from 8 000₸ per m² |
| Glass in a plastic doorbalcony, porch | from 22 000₸ per m² |
| Security film on glassoffices, ground floors | from 8 000₸ per m² |
| Tinting filmbright summer sun | from 5 500₸ per m² |
| Additional glazing beadsseating the unit | from 1 300₸ per item |
| Sash adjustment with removalto match the weight of the new unit | from 4 000₸ per sash |
| Call-out without repairdiagnostics | from 3 600₸ per job |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi
Book a measuring visitWhat every order includes.
on the unit and the master's work
we come, measure and help choose a unit
if a window is broken in winter, with a surcharge
after measuring the amount does not change
installation: cash, card or Kaspi
on WhatsApp to your message and photo
we take requests every day
we work across Kazakhstan
Four steps to a warm window.

Write on WhatsApp and send a photo: a crack, fog inside the unit or frost on the glass.

The measurer measures the glass, checks the profile width and offers a unit warmer than the previous one.

The unit is made to the window's dimensions; if the glass is broken in frost, we will make and install it within a day with a surcharge.

The master quickly replaces the unit so the room does not cool down, fixes it with glazing beads and adjusts the sash.
Good to know
We handle double glazing replacement in Petropavlovsk as a direct contractor with our own fitters. We swap the sealed unit inside your existing frame, fit one- or two-chamber units matched to your window, and back the work with a 3-year warranty. Measuring and consultation are free, and you pay only after installation.
A sealed unit fails from the inside, so the first job is telling a dead one apart from a tired seal or hardware that a service visit can still put right.
Condensation trapped between the panes means the sealed assembly has lost its gas fill and no surface cleaning will bring it back. The moisture sits in the gap because the perimeter seal has given way, letting humid air past the spacer bar and desiccant. Once that happens, the pane itself is sound but the whole assembly is dead, and swapping it out is the only route back to a clear view. Watch for a white haze or water beads that appear on cold mornings, vanish by noon, then return the next day. Fogging that forms solely on the room side is usually a ventilation or gasket problem, so check the inner face before ordering a replacement.
The right glazing depends on what the window has to do — hold heat through a long cold season, cut traffic noise, or keep a bright room from overheating.
We fit one- and two-chamber glazing and match the chamber count and coating to the room, so a bedroom facing the cold gets more insulation than a sheltered kitchen window. A single-chamber build works where the winter load is mild and the frame is already tight; a two-chamber build adds a second air gap that slows heat loss through the coldest weeks. Energy-saving glass carries a low-emissivity coating that reflects warmth back into the room instead of letting it escape through the pane. The chamber count, glass thickness and coating together decide how the window performs — swapping only one of them rarely fixes a cold room. Energy-saving glass only pays off if the surround and seals are sound, so we confirm the surround holds before recommending the upgrade.
| Unit type | Best for | What it does |
|---|---|---|
| Standard one-chamber | Quiet rooms, mild exposure | Basic heat and sound barrier |
| Two-chamber | Bedrooms, long cold season | Extra insulation layer |
| Energy-saving | Rooms that feel cold | Reflects heat back inside |
| Noise-reduction | Windows over a road | Dampens street noise |
| Solar-control | Bright south-facing rooms | Limits heat and glare |
The frame stays in the wall; only the sealed unit comes out, which is why the job is quick and the room stays usable the same day.
Our fitters take out the old panel, clean the rebate and set the fresh one in the existing structure, and a single window is usually done within the visit. The glazing is measured against the aperture, lifted out whole, and the seating groove is scraped free of old sealant and grit before anything new goes in. For double glazing replacement Petropavlovsk homeowners can count on the same visit, with the surround left in place. The replacement is set on fresh bedding blocks, squared to the surround, and the joint sealed against draughts and water. No wall work, no plastering, no repainting around the edges. Clearing space by the window and moving fragile items beforehand speeds the swap, since the fitters work right at the aperture.
Accurate sizes decide whether the new unit fits first time, so the visit comes before any order and the timing follows from what the measurer finds.
Measuring and consultation are free, and our measurer comes at a time that suits you to take exact sizes and help pick the glazing and fixings. On site the measurer checks the rebate depth, the frame's squareness and how the old unit sits in its bed, then writes the dimensions into the order so the workshop cuts glass to the millimetre. He also looks at the hinges and the sill line, because a sagging frame changes the height you can safely glaze. A panel measured on site accounts for the frame's real condition, which a tape measure at home cannot show, so the visit prevents a misfit. In our practice the free call-out is what keeps a replacement to a single trip rather than two.
Urgent replacement can be done within one day at a surcharge on the unit, and we fit units in cold weather as long as the opening is sheltered during the swap. The crew tapes off the room, keeps the new unit indoors until the frame is open, and seals the perimeter before the temperature drops into the frame cavity. Fitting below freezing is workable because the glazing sits in a dry bed and the sealant cures against a warmed surface, not against frost. A fast turnaround depends on the size being confirmed first, so booking the measure early is what makes a same-day slot possible. In our practice the cold-weather jobs go smoothest when the customer clears the sill and the curtains before the crew arrives.
A direct contractor answers for the work from measure to handover, so the terms are simple to check before anything is ordered.
We give a 3-year warranty on glass unit replacement, and it covers the panel and the fitting, while impact damage from outside stays a paid replacement. The same terms apply whether the glazing is a one-chamber or a two-chamber build, and they follow the sealed assembly rather than the frame you already have. A crack that starts at a stone mark, a football or a branch is physical damage, so it falls outside the cover and is quoted as a fresh panel. Failures that come from the build itself — a seal that lets moisture in, condensation between the panes, a loose bead after fitting — are handled as warranty work. Keeping the handover paperwork makes a warranty claim quick, since it records the glazing type and the date of fitting.
Replacing just the glazing keeps a sound frame and costs less than a new window, while a frame that is warped or rotten calls for full window installation instead. A sound surround is one that closes without force, sits square in the opening and shows no soft or crumbling timber at the corners. When the frame still holds, the sashes come out, the sealed assembly is swapped and the hardware goes back on the same day. Payment is taken after installation — cash, card or Kaspi — so nothing is settled until the new panes are in and checked. If the seal and hardware are worn, changing them alongside the glazing saves a second visit, so ask the measurer to check them during the call.
The decision comes down to a few practical checks, not to guesswork. Below are the points worth keeping in mind before you order new glazing.
Double glazing replacement, repair, warranty, choosing, checking the work
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, in most cases only the unit is replaced while the frame and sash stay in place. During the free measuring visit, the technician checks whether the frame is intact and the glazing beads hold — if the profile is damaged, other repairs may be needed.
Seal the crack with tape or film to keep cold and wind out of the home, and order a replacement. If it is urgent, we make and fit a new unit within a day — it depends on the window and our workload.
Fog between the panes means the unit's seal is broken, and it cannot be fixed on site — a new double glazing unit is needed. We replace such a unit under the three-year warranty on double glazing replacement.
The warranty on the window itself usually remains, but the window seller will no longer accept claims about the unit and its installation. Our double glazing replacement has its own three-year warranty.
Check that the unit sits evenly, the glazing beads are clicked in without gaps, the sash closes tightly and there is no draught along the edge. After installation, the glass should not wobble, and there should be no scratches or sealant marks on the profile.
It is worth it: the energy-saving coating reduces freezing and condensation on the glass even in an old frame. But if the frame itself lets in draughts, it is better to fix the seal and sashes first — it depends on the window.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp