Seasonal adjustment
Switching the window to winter or summer mode. Price from 3 000 ₸ per window, adjustment takes a few minutes.


Seasonal adjustment
Switching the window to winter or summer mode. Price from 3 000 ₸ per window, adjustment takes a few minutes.

Draught elimination
Tightening cams and adjusting sash pressure. Price from 3 500 ₸ per sash, technician arrives at a convenient time.

Hinge adjustment
Aligning the sash vertically and horizontally. Price from 3 000 ₸ per sash, sash removal possible.

Hardware lubrication
Cleaning and lubricating the mechanism, adjusting handle movement. Price from 1 250 ₸ per sash, wear prevention.

Door adjustment
Adjusting balcony door hinges, eliminating sagging. Price from 6 000 ₸ per item, technician visit.

5,097 reviews on review sites
Plastic window hardware needs adjustment over time: pressure, hinges and cams ensure a tight seal.
Residents notice the problem through seasonal complaints: in winter, draughts come from under the sash, the handle turns stiffly or with effort, the sash catches on the frame when closing, and in summer the window closes too tightly. Such symptoms appear gradually and indicate misadjusted hardware.
During adjustment, the technician checks the hinges, cams, handle and seal — these components are responsible for smooth operation and tightness. Adjustment takes from a few minutes and does not require replacement parts if the mechanism is intact.

cost of basic sash adjustment
technician arrives at a convenient time
pressure, hinges, cams — the basis of adjustment
The technician checks pressure, hinges and cams, then adjusts the hardware and lubricates the mechanism.

Checks gaps around the perimeter, seal condition and sash geometry.
After adjustment, the technician checks the result: runs a sheet of paper along the contour and sees if it is clamped equally at different points, and also assesses the evenness of the gap between the sash and frame.
Tightens or loosens the hinges so the sash doesn't catch on the frame and closes first time.
Applies lubricant to the mechanism. If parts are worn, offers replacement — from 1 250 ₸ per sash.
Five types of window and balcony door adjustment with price per unit.
Winter/summer · per window

Switching the pressure setting to winter or summer mode for a tighter seal.
Fixing draughts · per sash

Adjusting the cams so the sash fits snugly around the perimeter.
Sash adjustment · per sash

Aligning the sash so it doesn't catch on the frame and closes easily.
Basic adjustment · per sash

Basic pressure setting without removing the sash.
Hinge adjustment · per unit

Fixing a sagging door, adjusting movement and pressure.
Price list for adjusting hardware and sashes, with unit and timeframe.
| Type of work | Price |
|---|---|
| Basic sash adjustmentbasic pressure setting | from 3 000₸ per sash |
| Complex adjustment with sash removalrequires sash removal | from 4 000₸ per sash |
| Balcony door adjustmentdoor hinge adjustment | from 6 000₸ per item |
| Seasonal adjustment (winter/summer)switching to winter or summer mode | from 3 000₸ per window |
| Draught eliminationpressure setting | from 3 500₸ per sash |
| Window handle replacementincluding installation | from 2 750₸ per item |
| Hardware repairrestoring mechanism operation | from 7 800₸ per job |
| Unlocking a jammed sashif the sash won't open | from 2 400₸ per sash |
| Comprehensive window servicingfull adjustment and lubrication | from 10 000₸ per window |
| Hardware cleaning and lubricationmechanism maintenance | from 1 250₸ per sash |
| Micro-lift or extra pressure device installationadditional hardware | from 1 700₸ per item |
| Winter (slot) ventilation installationmechanism installation | from 7 600₸ per item |
The price is fixed in the order after measuring.Measuring and consultation are free.Payment after installation: cash, card or Kaspi.
Book an adjustmentFacts about the company that matter when choosing an adjustment specialist.
we make and repair window structures
for work and replaced components
inspection and consultation in Almaty
we accept requests any day of the week
cash, card or Kaspi
the specialist will come at a convenient time
we answer questions about adjustment
of Kazakhstan, including Petropavlovsk
From request to checking the result — four steps.

You describe the problem, the specialist clarifies details and sets a convenient time.

The specialist arrives with tools, inspects the window and identifies the cause.

The specialist discusses the necessary operations with you and fixes the final price before starting the adjustment.

You check how the sash closes, then pay for the work.
Good to know
We handle pvc window adjustment in Petropavlovsk with our own fitters, not through an agency. A fitter comes to your home, tunes the hinges, cams and sash geometry, and replaces the seal if it has gone hard. Window repair work and replaced parts carry a 1-year warranty, and you pay after the job.
A window rarely fails in one morning; it drifts out of tune over seasons, with early signals like a stiff handle, a draught along one edge or a dragging sash.
A sash sags because the hinges carry the whole weight of the leaf and the glass unit, and over years the screws settle, the hinge plates shift and the leaf drops a few millimetres at the handle side. The window profile itself rarely bends — the movement happens in the hardware, where the lower hinge takes the load and the upper one only guides the leaf. A tall balcony door sags sooner than a small kitchen window, so check the handle-side gap first: a hairline means the hinges only need a nudge, while a visible wedge of daylight means the lower hinge has shifted and the sash has to be lifted back before anything else is set.
Adjustment, repair and hardware replacement are often confused. Which one your window needs depends on the mechanism and seal condition, not on what anyone would prefer to sell.
| Work | What it fixes | When it is the right call | What we check first |
|---|---|---|---|
| Adjustment | Sash position, pressure, hinge tension | Window closes but catches, draughts or the handle is stiff | Hinges, cams, sash geometry |
| Repair | A broken or loose part | Handle spins, hinge cracked, sash drops suddenly | Hardware condition, screw seats |
| Seal replacement | Air and water leaks along the frame | Seal is hard, flattened or torn | Seal elasticity, frame groove |
| New hardware | Worn mechanism beyond tuning | Cams no longer hold pressure, parts discontinued | Profile type, hinge model |
We replace the seal when it has lost elasticity — press a fingernail into it and if the dent stays, no hinge tuning will stop the draught. We change the seal in windows of any manufacturer, including KBE, Rehau, VEKA and Provedal profiles, matching the cord to the frame groove rather than stretching a thinner one. A worn hinge that is only re-tuned will keep dragging the sash out of line within a season, and a fresh seal on a misaligned sash wears out just as fast. That is why geometry comes first, then the seal. On a sash that still sits square, a seal swap alone often restores airtightness for years.
A visit runs from the first message to a closed door: the fitter comes to your home and works on the window where it stands, leaving the sash hanging in place.
Our fitter works three axes on the leaf — horizontal shift, vertical drop and pressure against the frame — using adjustment screws hidden under the hinge caps and eccentric cams on the panel edge. A sagging corner is lifted by the lower hinge, a leaf rubbing on the strike side is shifted sideways, and the cams set how hard it pulls onto the seal. The job is done with a hex key and a screwdriver, the panel never leaving the frame. Pressure is most often overdone at home; a window clamped too tight seals well in winter and jams solid in summer, so the fitter sets it for the coming season. Every pvc window adjustment in Petropavlovsk follows this same sequence, so the result does not depend on which fitter arrives.
Petropavlovsk swings hard between seasons, and the tightness a sash needs in January differs from July. Here is how seasonal setting works and how often hardware needs attention.
The setting has a winter and a summer position, differing by a quarter turn on the eccentric cams — firmer in the cold months to hold heat, slacker in the warm ones so the seal is not crushed flat. On most hardware the cams sit on the sash edge and rotate between three marks: the tightest pulls the leaf hard against the frame, the loosest leaves it barely touching, the middle sits between them. In January the gasket stiffens and shrinks slightly, so the firmer position closes the gap the material no longer fills. In July that same strip softens and expands, and the slack setting lets it spring back.
Some work is within reach of a careful owner with one small tool, and some is not. Know the line before turning screws.
We get called in when the panel has dropped more than a few millimetres, when a hinge is cracked, or when the window still draughts after the cams were turned — at that point the problem is geometry or a worn part, not pressure. A dropped leaf pulls the whole frame out of square, so the corners lift away from the seal and the draught returns within weeks of a home fix. Our fitters square the leaf geometry first and only then set the pressure, so the result holds through the season. A unit re-tuned repeatedly without fixing the drop wears the hinge seats, and a tuning job becomes a hardware replacement.
Before you call, know who will arrive, what happens if something needs attention, and when money changes hands. Here are our terms, without the small print.
Repairs and any parts we replace carry a 1-year warranty, and the fitters who arrive are our own technicians rather than subcontracted crews or an agency. That covers the labour on the sashes and hardware we touched and the components we swapped in, so a fitting or handle we installed stays our responsibility for twelve months. Because the same technicians who do the work also stand behind it, there is no handoff between a contractor and a warranty desk, which keeps any claim simple and traceable. If something we fitted fails within that period, report it promptly and keep the original paperwork so the visit and replacement part are handled without dispute. A glass unit swap runs on a separate 3-year guarantee, and full installation carries 5 years.
A window gives clear signals before it stops closing properly, and the right response at the right moment keeps the cost and the work small.
Diagnostics, DIY adjustment, compression, hardware wear
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionIf the sash catches the frame, drafts come through around the perimeter, or the handle turns stiffly, adjusting the hardware is usually enough. Repair is needed when parts are broken: a cracked hinge, stripped threads, or a worn mechanism. The technician will determine this during an inspection.
Simple tasks are doable on your own: tighten the compression with eccentrics, slightly adjust the hinges with an Allen key. But without experience, it's easy to throw off the sash geometry and damage the hardware. If the window has sagged or won't close, it's better to call a technician.
The compression is changed using eccentrics on the end of the sash: turning one way increases the pressure against the frame, the other way reduces it. In winter it's set stronger, in summer weaker so the seal doesn't get crushed. The exact position depends on the hardware model.
The sash sags from load, temperature changes, and loosened hinges, which makes it catch the frame at the bottom. In most cases, adjusting the hinges and setting the geometry helps. If the fixings or hinge are worn, parts replacement will be needed.
Partly yes: you can tighten the hinges and compression if the mechanism is still intact. When the hardware is worn out, the handle jams, or the sash won't stay fixed, adjustment isn't enough and worn parts need replacing. The technician will say after inspection what can be done.
After adjustment, the technician opens and closes the sash, checks the handle moves smoothly, the compression is even around the perimeter, and there's no catching on the frame. They also check for any remaining drafts. The warranty on such work is 1 year.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp