Craftsman by a new plastic window in the kitchen
from 42 500 ₸ per windowFree measuring, installation with 5-year warrantyCalculate

PVC Window Installation in Karaganda

Plastic · PVC

PVC window

Single-leaf with installation — from 42 500 ₸ per window, double-leaf — from 65 500 ₸. Free measuring and consultation.

Technician holds a new white PVC window handle, showing the replacement
GoogleYandex MapsZoon

5,097 reviews on review sites

What PVC window installation in Karaganda includes

Removal of the old frame, installation of the new structure, sealing the joint, reveals, windowsill and drip sill — all work done in one visit.

How the service works

How window replacement differs from repairing an old frame and when to replace the whole structure. Replacement is needed when the profile has lost its geometry, cracks appear, or the fittings cannot be adjusted. Repair is justified when the frame is sound and only the seal or fittings are worn.

What preparing the opening before installation includes: checking geometry, wall and reveal condition, need for reinforcement. The technician assesses the vertical and horizontal of the opening, wall strength and reveal condition, and suggests reinforcement if needed.

New white PVC window in a bare wall opening, the joint at the wall filled with mounting foam
5 years

warranty on window installation

Free

measuring and surveyor consultation

No days off

we accept requests daily

Structures
PVCWoodAluminiumBalcony blockDouble glazing

How PVC window fitting is performed

The frame is fixed with anchors or mounting plates, the joint is filled with vapour and waterproofing, and external joints are sealed.

Close-up of the installation joint: cured foam between the white PVC frame and the concrete opening
  • 01Anchor fixing

    The frame is fixed with anchors through the profile into the wall — a rigid fit for heavy and wide structures.

  • 02Mounting plates

    Flexible plates are attached to the frame and wall, convenient where drilling the profile around the perimeter is not possible.

  • 03Joint insulation

    The installation joint is filled with foam, covered with vapour barrier inside and waterproofing outside.

  • 04Reinstallation to GOST

    If the joint freezes after third-party installation, the window is removed and reinstalled to GOST — from 5 200 ₸ per m².

Types of PVC windows for flats

Profile and double glazing are chosen for the opening, floor and task: quiet by the road, warmth in a corner flat, or access to a balcony.

PVC single-leaf

Plastic · with installation

Technician holds a new white PVC window handle, showing the replacement

Compact window for kitchen, bathroom or children's room. Fits a standard opening in a panel building.

from 42 500 ₸

PVC two-leaf

Plastic · with fitting

Hands holding a triple-glazed unit sample with a grey spacer frame: window noise insulation

A casement leaf and a fixed section — for living rooms and bedrooms where you need ventilation access.

from 65 500 ₸

Turnkey window

Plastic · per m²

Technician holding a white PVC profile for a bay window

A structure with fitting, reveals and sill in one quote. Size is calculated by the opening area.

from 60 000 ₸/m²

Balcony block

Window with door · per unit

A craftsman holds a white plastic window reveal panel for finishing in his hand

A window and door in one block for access to a loggia or balcony. Supplied with fitting.

from 95 500 ₸

Double glazing

Replacement · urgent production

Technician fitting a white metal drip sill under a window during installation

We replace broken or fogged double glazing. Urgent production is available at a surcharge to the glass unit price.

from 5 500 ₸/m²

PVC window installation prices in Karaganda

The table lists works and structures with units of measurement; the total is fixed in the order after measuring.

Type of workPrice
Installation of a PVC windowstandard installationfrom 4 650₸ per m²
Installation to GOSTwith vapour and waterproofingfrom 5 200₸ per m²
Dismantling of old windowincluding disposalfrom 1 800₸ per m²
Single-leaf PVC windowwith installationfrom 42 500₸ per window
Double-leaf PVC windowwith installationfrom 65 500₸ per window
PVC window with installationturnkeyfrom 60 000₸ per m²
Balcony block with doorwith installationfrom 95 500₸ per unit
PVC windowsill installationwith cuttingfrom 5 500₸ per linear m
Drip sill installationwith sealingfrom 3 250₸ per linear m
PVC reveals (sandwich panels)with fittingsfrom 4 700₸ per linear m
Reveals for standard window turnkeywith finishingfrom 15 000₸ per window
Sealing of external jointswith vapour barrierfrom 2 000₸ per linear m

The price is fixed in the order after measuringMeasuring and consultation — freePayment after fitting: cash, card, Kaspi

Book a measurer

Why customers order PVC windows in Karaganda from us

Eight facts about our work: fitting warranty, free measuring, payment after fitting and price fixing.

Fitting warranty5 years

for window installation works

Measuring0 ₸

measuring and consultation free

Fixingsfor profile

we choose fixings for the window profile and floor: Z-brackets, plungers, magnets

Paymentafter

cash, card or Kaspi

Pricefixed

fixed in the order after measuring

Coverage17

cities of Kazakhstan

WhatsApp reply5 min

we reply within five minutes

Double glazing3 years

warranty for double glazing replacement

How PVC window installation is carried out in Karaganda

Four steps from request to finished window

  1. A hand holds a smartphone with a dark screen by a white PVC window in a bright room
    01at a convenient time

    Measuring

    The measurer arrives at a convenient time, takes the opening dimensions and helps choose the profile, double glazing and fixings.

  2. A tape measure measures the opening of a white PVC window in a bright room with warm walls
    02by agreement

    Production

    The structure is assembled to the measured dimensions. The timing and fitting date are agreed with you after measuring.

  3. A worker's hands work with the lower profile of a white PVC window frame on the sill
    03on fitting day

    Removal and fitting

    The old window is removed with disposal, the new frame is fitted to GOST with vapour and waterproofing, and the joints are sealed.

  4. A finished white PVC window with a clean sill and reveals in a bright room
    04after works

    Handover

    The sill, drip and reveals are installed, the leaves and fixings are checked, and documents and fitting warranty are handed over.

Good to know

PVC Window Installation in Karaganda from Our Own Crews with a 5-Year Warranty

We handle pvc window installation karaganda homeowners can book directly, with our own installers rather than middlemen. We start with a free measuring visit, help you pick the profile, glass unit and fixings, finish the slopes in the same job and back the installation with a 5-year warranty. You pay only after the work is done.

How pvc window installation karaganda starts with a free measuring visit

Message us on WhatsApp and we reply within five minutes. The measurer then arrives at a time that suits you, and both the visit and consultation are free.

What the measurer checks when he arrives

Our measurer comes at a time that suits you, takes the opening sizes and helps you choose the design, mesh and fixings on the spot. He notes the wall material, the floor level and how the window opens, because those details decide which fasteners hold and how the frame sits. For hinged door screens he picks between the Economy 32×10 mm profile and the heavier Prestige 42×17 mm, and the frame gets painted to match your windows. Measuring and consultation cost nothing, and the price is fixed in the order afterwards. A measuring visit catches most sizing mistakes, as the measurer reads the wall and floor level, not just width and height. This is how pvc window installation karaganda begins smoothly, with every size checked before booking.

From order to a fixed price and a booked date

After measuring we fix the price in the order, so the figure you agree to is the figure you pay once the windows are in. Any change to profile or glass unit is discussed before work starts, never discovered on installation day. We are open seven days a week, so a visit can be booked for a weekend, and WhatsApp answers questions about sizes or fixings within five minutes. Payment happens after installation — cash, card or Kaspi — tying the order to a finished job rather than a deposit. Locking the price at the order stage protects you from mid-job surprises and means the crew arrives with the right frame and fasteners matched to your opening.

How pvc window installation runs on site from removal to clean-up

On installation day the crew removes the old unit, levels the new frame, foams and seals the joint, hangs the sashes, finishes the slopes and clears the room before leaving.

The installation steps in order

  • Removal: crews take out the old window, check the opening and clear dust before installation.
  • Setting the frame: the unit is levelled with packers and fixed through the sash into the wall.
  • Foam and seal: the joint is filled with foam and closed with vapour-tight tape outside and vapour-open membrane inside.
  • Sashes and hardware: sashes go back on hinges, handles and locking points set to close without force.
  • Slope finishing: the crew trims and seals slopes around the frame in the same visit.
  • Clean-up: offcuts, old frame parts and foam residue leave with the team, and the floor is swept before sign-off.

What to check before you sign off

  • Every sash: open and close each fully; check the handle turns easily and locking points catch.
  • Frame and slopes: run a hand along joints and slope edges for gaps; look for daylight or movement at corners.
  • Glass and sill: check for scratches, chips and condensation between panes; confirm the sill sits level without rocking.
  • Documents: request written warranty terms and note the crew's finish date, as five-year installation cover starts then.

Repair or full replacement, deciding by the state of your window

A full replacement is not always the answer. Often a window that drags, whistles or fogs up is fixed with an adjustment, a fresh seal or one glass unit.

Signs that repair will still solve the problem

  • Sash drags or catches: hardware slipped out of line; adjustment restores smooth closing.
  • Draught along the edge: gasket flattened with age; swapping it restores the airtight line.
  • One fogged pane: moisture inside a single double-glazed unit; replacing that unit solves it.
  • Loose fittings: handles, hinges and locking points wear first; fresh parts extend the life of the window.
  • Worn gasket on any brand: we change seals in windows of any manufacturer, including KBE, Rehau, VEKA and Provedal profiles.

When a new window is the better call

When the frame is warped, the profile is cracked or condensation sits between panes across the whole window, a full installation makes more sense than patching parts. A bent PVC profile cannot be straightened, and once the reinforcement inside the chamber is compromised, every seal you fit will fail again within a season. Condensation on the room side of the glass is usually about ventilation, not a defect — but moisture trapped inside the unit means the seal has failed and that pane needs replacing. If several units fog at once and the sashes no longer sit flush, the window has reached the end of its working life, and a fresh installation with a five-year warranty on the fitting is the calmer route than small repairs.

Choosing a profile and glass unit for pvc window installation in Karaganda

Frame and glazing together decide how well a window holds heat through the Karaganda winter, so they are chosen as one pair for a flat, house or balcony.

Profile and glass unit matched to the room

Matching window build to each room type
RoomWhat we selectWhat we check
Living room, bedroomMulti-chamber frame, two-pane glazingOpening depth, heat retention
Kitchen, bathroomFrame with tight sealsMoisture, ventilation
Balcony, loggiaSlimmer frame, single or two-pane glazingSash weight, hardware load

Hinged or sliding for a balcony or loggia

Hinged or sliding for a balcony or loggia — For a balcony or loggia we usually suggest sliding sashes where space is tight and hinged ones where you want a full opening and easier cleaning. Hinged leaves swing inward and give clear access to the whole pane, which matters on upper floors where you clean from inside. Sliding leaves travel along a track and leave the floor and sill free, so furniture and drying racks fit without obstruction. Hardware differs: hinged leaves rely on tilt-and-turn mechanisms and handles, while sliding ones run on rollers and guides that carry the weight. Sliding saves floor space but seals less tightly than a hinged leaf, so on a cold-facing loggia the hinged option often wins.

Fixings, sizing and the details that keep pvc window installation solid

Correct fasteners and an exact size hold a window steady for years. Here is how we take the opening measurement and match the fixing to what sits behind the frame.

How the opening is measured and sized

We size the new window to the clear opening after the old one is out, so the unit sits true rather than being squeezed into a rough estimate. The measurer comes at a convenient time, takes the dimensions of the reveal itself and helps choose the profile, the glass unit and the fastenings in the same visit. A window ordered to those numbers drops into place square, with even gaps for foam and trim on every side. Measuring with the old window still in place hides uneven walls — taking the size after removal is what stops a unit from sitting out of level.

Choosing fixings for panel, brick and floor level

Fastener choice by wall type and floor position
Wall or positionFixing we useWhat we check
Panel jointAnchors into the solid ribBite past the hollow core
Solid brickThreaded studsBrick depth and mortar quality
Floor levelPacked shims plus boltsSill bears evenly, no rocking
Upper floorsHeavier bolts, closer spacingWind load on the exposed face

Warranty, payment and how to book installation

This section sets out the cover we give on finished work, how payment works once the job is done, and the fastest way to book a measuring visit.

What the warranty covers

  • Installation work: a 5-year guarantee covers window fitting and how the unit sits in the opening.
  • Glass unit replacement: a 3-year guarantee covers a replaced glass unit, including a failed seal or cracked pane.
  • Window repair: repair carries a 1-year guarantee covering both labour and any parts we replaced.
  • Why the terms differ: each window part wears at its own rate, so cover is matched to the component.
  • What to keep: the order and signed handover sheet are what we check first for any claim.

Paying after installation and booking a visit

You pay after installation by cash, card or Kaspi, and you can book a measuring visit by messaging us on WhatsApp, where we reply within 5 minutes. We are open seven days a week, so an appointment can be arranged for a day that suits you, weekend included. The price is fixed in the order after measuring, so the figure you agree to is the figure you settle once everything is complete. Nothing is taken up front — the balance changes hands only after the crew has finished and you have looked over the result. That arrangement matters most on replacement jobs, where the old window comes out first and the new one has to sit correctly before anyone signs off.

What matters in measuring before new window fitting

A window job goes well when the sequence is right and every choice matches the opening, the wall and the room behind it.

  • Measure before you order: a free visit fixes sizes and price in writing, so nothing is cut on guesswork.
  • Repair or replace by frame condition: sound frames with tired seals take repair, warped or rotten ones suit a new window.
  • Profile and glazing together: chamber count and panes are chosen as one system.
  • Fixings for the wall and floor: panel, brick and upper floors need different anchors and brackets.
  • Warranty and payment by type of work: installation carries five years, glazing replacement three, and payment follows completion.

Questions about PVC window installation in Karaganda

Ordering, fitting, choosing double glazing, disposal

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01How do I choose a company for window replacement in Karaganda?

Choose a contractor who does the measuring and fitting themselves and guarantees the installation. We replace windows, double glazing and seals, give a 5-year guarantee on window fitting, and the measuring visit and consultation are free.

02What are the steps of window replacement from removal to reveals?

First the sashes and old frame are removed, the opening is prepared, then the new unit is aligned and fixed, the seam is insulated, the sashes are adjusted, and reveals are installed with a sill and window board. The order and care at each step affect whether draughts appear later.

03Will an old window in a panel building be replaced if the opening is uneven?

Yes, unevenness in the opening is levelled during preparation: the frame is aligned by level, and gaps are closed with a fitting seam. That is why a window is not ordered to the old dimensions — measuring the opening is required.

04Is it possible to keep the existing window board and reveals when replacing a window?

Sometimes the window board and reveals can be kept if they are in good condition and removal is careful, but more often they are removed and reinstalled. This is decided during the measuring visit based on the condition of the opening and finishes.

05Which window should I install so it does not freeze in winter?

For Karaganda frosts, a profile with a wide chamber and a double-glazed unit with energy-saving coating is suitable. Pay attention to the number of seal contours — there should be at least two.

06Which double glazing is best for an apartment if the windows face a noisy street?

In that case, choose a double-glazed unit with different glass thicknesses and an enlarged air chamber — it dampens street noise better. Airtight fitting with quality seam insulation also helps.

07What should I do if old frames and glass remain after window replacement?

Old frames and double-glazed units are usually taken away by the fitters after removal — this should be discussed when ordering. If removal is not included in the work, the remains need to be disposed of separately.

Reviews of PVC window installation in Karaganda

5,0based on 97 reviews on platforms
All reviews