Double-chamber
Suitable for apartments where cold drafts blow by the window in winter and frost grows on the glass. Price — from 20 000 ₸ per m².


Double-chamber
Suitable for apartments where cold drafts blow by the window in winter and frost grows on the glass. Price — from 20 000 ₸ per m².

Energy-saving
The coating on the glass reflects heat back into the room and keeps out excess heat in summer. From 15 200 ₸ per m².

Soundproof
Glass of different thicknesses dampens traffic noise, making the bedroom quieter. Calculation is the same as for a standard unit, from 19 500 ₸ per m².

Single-chamber
A lightweight unit for unheated spaces where light and dust protection matter. Cost — from 12 600 ₸ per m².

Glass for door
We replace the glass in a plastic balcony door and adjust the hinges after replacement. From 22 000 ₸ per m².

5,097 reviews on review sites
If the frame is intact and the hardware works, there's no need to replace the whole window. A new unit in the old sash is enough.
A plastic frame lasts long, but the unit inside can crack, become cloudy, or simply be too cold. In that case, the technician replaces only the glass block without touching the reveals, windowsill, or outside flashing.
Karaganda winters with frost and wind quickly reveal weak windows. That's why when replacing, we recommend installing a double-chamber unit in living rooms and leaving a single-chamber one for loggias and storerooms.

double-chamber unit instead of a cold one
warranty on the unit and technician's work
measuring and unit selection on site
Four reasons why people in Karaganda ask to replace a unit.

A crack in frost grows quickly and lets cold in, so it's better to replace the glass before winter.
If there's fog and streaks inside the unit, the sealant is already letting moisture in, and such a block can't be repaired.
We make a unit to size urgently, within one day with a surcharge to the double-glazed unit price, and install it right away.
We replace a single-chamber block in a living room with a double-chamber one, and frost along the glass edge disappears.
Each option suits its room: a bedroom needs silence and warmth, a loggia needs lightness and light.
living rooms

Three glasses with two chambers retain heat even in severe frost with wind.
corner apartments

The coating returns heat to the room, so the glass by the windowsill is not as cold.
loggia, storage room

Two panes, light weight, suitable for unheated spaces.
balcony exit

We select glass for PVC doors by thickness so it doesn't sag or let in drafts.
children's room, ground floor

Transparent film holds shards if a ball or stone breaks the glass.
The cost depends on the area, number of chambers and type of glass; the surveyor gives it on site.
| Type of work | Price |
|---|---|
| Double-glazed unit instead of singlewarmer in frost | from 20 000₸ per m² |
| Replacement of single-glazed unitfor loggia | from 12 600₸ per m² |
| Double-glazed unit replacement, per m²by sash area | from 19 500₸ per m² |
| Energy-saving double-glazed unitcoated glass | from 15 200₸ per m² |
| Broken glass replacementafter impact | from 8 000₸ per m² |
| Glass replacement in plastic doorbalcony door | from 22 000₸ per m² |
| Armour film on glassagainst shards | from 8 000₸ per m² |
| Tinting filmsunny side | from 5 500₸ per m² |
| Additional glazing beadsunit fixing | from 1 300₸ per item |
| Sash adjustment with removalafter heavy unit | from 4 000₸ per sash |
| Window inspection without repairmaster visit | from 3 600₸ per job |
Price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi
Call a surveyorWhat we guarantee every client in Karaganda.
on the installed double glazing and work
production and replacement of broken window with surcharge
we name it after measuring and don't change it during work
installation: cash, card or via Kaspi
at a time convenient for you, with unit selection
on WhatsApp to photos and window questions
you can leave a request any day
we work across Kazakhstan
The whole journey from message to warm window.

Send a photo of the window to WhatsApp: a crack, fog inside the unit or frost along the glass edge.

The surveyor measures the glass, checks the profile and offers a unit warmer or quieter than before.

The unit is made to your dimensions. We'll replace a broken window urgently, within 1 day with surcharge.

The technician places the unit on supports, fixes it with glazing beads and checks the sash. Then you pay.
Good to know
We handle double glazing replacement in Karaganda with our own installers, a free measuring visit and a 3-year warranty on the replacement itself. We swap the sealed unit inside your existing frame, renew the beads and seal, take the old unit away and let you pay after installation by cash, card or Kaspi.
Replacement is not always the answer. First we separate a fault in the glazing itself from a fault in the frame, the hardware or the gasket — that decides what actually needs ordering.
We replace just the glazing whenever the frame is sound, the sashes close evenly and the hardware still holds — that covers most foggy or cracked glazing we measure. A swap keeps the existing profile, sill and trim, so the work stays short and the room is barely disturbed. Repair is the better call when the fault sits in the frame rather than the glazing: a warped profile, a sash that drops on opening, or draughts coming through the hinges instead of the glass edge. In those cases a fresh glass pack will not stop the leak, and the money is better spent on window repair or a full window installation. On a sound frame we simply lift out the old part, fit the new one and re-bead it, and the replacement carries our 3-year warranty on glass unit replacement.
The sharply continental climate here swings from hard frost to hot, dry summer, and that range drives the choice of chambers, coating and pane build. We sort the options by performance, not by price tag.
| Unit type | Panes and gaps | Best for | Watch out for |
|---|---|---|---|
| Single-chamber | Two panes, one gap | Mild rooms, internal doors, glazed balconies | Condensation on cold snaps |
| Double-chamber | Three panes, two gaps | Heated living rooms, bedrooms, kitchens | Needs a deep enough rebate |
| Energy-efficient build | Coated glass, optional argon | Rooms facing wind and frost | Coating must face the right way |
| Non-standard shape | Made to template | Arched, angled or oversized openings | Longer lead time |
We fit energy-efficient coated panes and argon fill where the room runs cold, and we cut non-standard units to a template when the opening is arched or angled. A low-emissivity layer works only with the treated surface facing the air gap, so a pane flipped during assembly looks identical but loses most of its benefit. Pane gauge matters just as much: a wider gap and heavier sheets hold the temperature steadier, while oversized openings need extra substance to resist wind load. Our measurer checks the profile and rebate before we promise a swap from one chamber to two, since the frame has to be deep enough to take the extra sheet. A build sheet stating which side carries the layer and how heavy the panes are protects the result better than any sales name.
The job runs in clear steps, and at each one you know what is happening to your window and what is expected of you. Below is the whole path from the first call to the final check.
Our measurer comes at a time that suits you, takes the sizes of the opening and the rebate, and helps you choose the glass build, the beads and the seal before anything is ordered. Measuring and consultation are free, and the visit happens on site rather than over the phone. He checks the depth of the rebate, the condition of the frame, the bead profile and the existing gasket, then notes how the sash sits and whether the drainage slots are clear. Depth and bead profile decide how thick the new glass can be, so sizes taken from the old pane alone often lead to a glass pack that will not seat. Ask to see the rebate measurement on the frame itself — it is the number the factory will work to. This is how the double glazing replacement Karaganda customers order begins, with accurate sizes taken on site.
A cracked pane or a hard frost does not cancel the job, but it changes the order of steps. Below is the urgent scenario and how glazing goes in at sub-zero temperatures.
We can make and fit a replacement unit within one day when the case is urgent, with a surcharge added to the glass itself. The workshop cuts panes, assembles the spacer frame and fills it with desiccant the same morning the measurer confirms the size, so a broken pane does not have to wait for a scheduled batch. A cracked pane left overnight in frost lets moisture into the gap and spoils the desiccant, and once the granules are saturated the glazing fogs from the inside with no way to dry it out. A strip of tape over the crack buys a few hours, not a season. In our practice the call that comes after a cold night is almost always about a pane that sat cracked for a week — so book the urgent slot the same day the glass breaks.
We fit glazing through the winter, working quickly so the frame and the new seal are not left open to the cold for long. The old beads come off, the replacement goes in and the opening is closed again in one continuous pass, and the warm workshop air trapped inside the chamber is what keeps the glass clear later. Seals stay flexible in frost only if they are kept warm until the moment they go in, so a gasket that has sat in a cold van all morning is the usual reason a winter job starts to whistle at the first gust. Below minus fifteen the fitter keeps the new glass pack indoors until the opening is ready. Ask what temperature the team plans to work in — it tells you more about the result than any promise on paper.
Warranty terms, payment and the order sequence are what most people check before signing anything. Below is what our cover actually includes, how the figure is set and how the process runs when you deal with the contractor directly.
We give a 3-year warranty on glass unit replacement, and fogging that appears between the panes on its own is covered because it means the unit lost its seal. Moisture trapped inside the cavity comes from a failed primary or secondary seal, not from condensation on the room-side glass, so we check which side the haze sits on before accepting a claim. A chip or crack that starts at an edge after fitting is treated as impact rather than a fault, so the warranty covers the build and the fitting, not damage caused from outside. Keep the order sheet with the build formula — it lists the glass, spacer and coating, and it is what we match against when a claim comes in two winters later.
The price is fixed in the order after measuring, you pay once the glazing is in by cash, card or Kaspi, and we answer on WhatsApp within five minutes, seven days a week. Measuring and consultation cost nothing, and the measurer comes at a time that suits you, takes the sizes and confirms the formula before anything goes into production. Because the figure is locked at the measuring stage, any change to the unit build after that point is agreed before work starts, so the invoice at handover matches what was signed. The fitters who arrive are our own crew, not a subcontracted team, which is why the same people who measure can be asked about beads, slopes and drainage on the day.
Replacing a sealed glass pack is a short, tidy job when the diagnosis is right and the parts are renewed together. The points below sum up what matters most before you book anything.
Balcony door, airtightness, acceptance, choosing a double glazing unit
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionIn a balcony door, the double glazing unit is replaced the same way as in a window. The design may differ in unit size and thickness, but the technician will take measurements and select a suitable one. The key is to call a specialist to determine the exact parameters.
A double glazing unit that has lost its seal cannot be repaired: the broken sealant and contamination inside cannot be restored. In such cases, the entire unit must be replaced with a new one. Sometimes the cause of moisture is not the sealant but condensation — then window adjustment can help.
Inspect the unit against the light: there should be no cracks, chips, scratches or spots inside. Check for sealant delamination at the edges and whether the glazing beads fit tightly. If you notice a defect, point it out to the technician before signing the acceptance.
In a double-chamber double glazing unit, the entire unit is replaced, not just a single glass pane. This is because the unit is sealed, and replacing one pane would break the seal. The technician will remove the old unit and install a new one with the required specifications.
Yes, we work without days off, so you can replace the double glazing unit on any convenient day, including Saturday and Sunday. Measurement and consultation are free, and urgent replacement can be arranged within a day. Leave a request and we will agree on a time.
For a climate with cold winters, a double-chamber double glazing unit with energy-saving coating is usually chosen: it retains heat better and freezes less. A single-chamber unit is suitable for warm rooms or non-residential spaces. The exact choice depends on the window and heat requirements.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp