Craftsman by a new plastic window in the living room
from 42 500 ₸ per windowFree measuring visit, installation to GOST, 5-year workmanship warrantyCalculate

PVC Window Installation in Shymkent

PVC windows · PVC

PVC profile

Warm profile with a double-glazed unit, from 42 500 ₸ per single-sash window with installation

Technician holds a new white PVC window handle, showing the replacement
GoogleYandex MapsZoon

5,097 reviews on review sites

What PVC window installation in Shymkent is

A new window solves the problems of old frames: draughts, freezing, street noise and high heating bills.

How the service works

Window replacement means removing the old frame together with the sashes, installing a new structure to GOST with vapour and waterproofing of the joint, fitting a windowsill and drip sill, and finishing the reveals. As a result, the opening gets a sealed contour with no cold bridges.

The order includes the structure itself, the windowsill, the drip sill and the reveals; the surveyor agrees the exact scope and materials on site. Work is carried out on PVC, wooden and aluminium windows, including balcony blocks and bay windows. The measuring visit and consultation are free, and the price is fixed in the order after measuring — no extra charges during installation.

New white PVC window in a bare wall opening, the joint at the wall filled with mounting foam
5 years

warranty on window installation

Free

measuring visit and consultation

Price fixed

in the order after measuring

5 options
PVCWoodAluminiumBalcony blockBay window

How new window fitting is performed

Reasons for replacement include frame wear, draughts, a freezing joint or poor-quality windows in a new building.

Close-up of the installation joint: cured foam between the white PVC frame and the concrete opening
  • 01Old wooden windows

    The frames have dried out, the sashes don't close, and draughts come through the gaps. Replacing with PVC solves these problems.

  • 02Windows in a new building

    The developer installed cheap windows with a thin double-glazed unit. Replacement improves heat and sound insulation.

  • 03Freezing joint

    A freezing joint, condensation and mould around the perimeter are reasons for reinstallation.

  • 04Reinstallation to GOST

    Reinstallation is needed if there is a draught from under the windowsill, the joint freezes or the window was installed in breach of technology.

Types of windows to install in Shymkent

The choice of structure depends on the opening, floor and goals: warmth, quiet or a view. Below are five options with prices per m².

PVC window

PVC profile, 2-chamber double-glazed unit

Technician holds a new white PVC window handle, showing the replacement

A warm window for flats and houses, from 60 000 ₸/m² turnkey with installation.

from 60 000 ₸/m²

Wooden window

Solid wood, 2-chamber double-glazed unit

Hands holding a triple-glazed unit sample with a grey spacer frame: window noise insulation

An eco-friendly option for a country house, from 60 000 ₸/m² with installation.

from 60 000 ₸/m²

Aluminium window

Aluminium, 1-chamber double-glazed unit

A craftsman holds a white plastic window reveal panel for finishing in his hand

A lightweight structure for loggias and gazebos, price calculated individually with installation.

from 10 200 ₸/job

Balcony unit

PVC, window and door, 2-chamber

Technician fitting a white metal drip sill under a window during installation

Ready-to-install set for balcony access, from 95 500 ₸ per unit with fitting.

from 95 500 ₸/pc.

Bay window

PVC, multi-faceted design

Technician holding a white PVC profile for a bay window

Panoramic views and extra light, from 60 000 ₸/m² turnkey.

from 60 000 ₸/m²

PVC window installation prices in Shymkent

Prices for fitting, removal and finishing are from the price list; the exact amount is fixed after measuring.

Type of workPrice
Installation of a PVC windowstandard installationfrom 4 650₸ per m²
Window installation to GOSTwith vapour and waterproofingfrom 5 200₸ per m²
Dismantling of the old windowincluding disposalfrom 1 800₸ per m²
Single-sash PVC windowwith installationfrom 42 500₸ per window
Double-sash PVC windowwith installationfrom 65 500₸ per window
PVC window with installationturnkeyfrom 60 000₸ per m²
Balcony block with doorwith installationfrom 95 500₸ per item
PVC windowsill installationstandard widthfrom 5 500₸ per linear metre
Drip sill installationwith sealingfrom 3 250₸ per linear metre
PVC reveals (sandwich panels)with fixingsfrom 4 700₸ per linear metre
Reveals for a standard window, turnkeywith finishingfrom 15 000₸ per window
Sealing of external jointsafter installationfrom 2 000₸ per linear metre

The price is fixed in the order after measuring.Measuring and consultation are free.Payment after fitting: cash, card or Kaspi.

Book a free measuring visit

Why customers order window replacement in Shymkent from us

Facts that matter when ordering: fitting warranty, free measuring and price fixing.

Fitting warranty5 years

for window installation work

Free measuring0 ₸

the measurer will come at a convenient time

Seal replacementAny profile

in windows of any manufacturer

Open seven days a weekDaily

from 09:00 to 22:00

WhatsApp consultation5 minutes

we answer questions within 5 minutes

Double glazing warranty3 years

for double glazing replacement

Our office in Almaty404 Seifullina St

we process orders and provide consultations

Coverage17 cities

you can order in 17 cities of Kazakhstan

How PVC window installation is carried out in Shymkent

Four steps from request to a finished window with finishing.

  1. A hand holds a smartphone with a dark screen by a white PVC window in a bright room
    011 day

    Measuring

    The measurer will come free of charge, take the dimensions of the opening, help choose the design and fixings.

  2. A tape measure measures the opening of a white PVC window in a bright room with warm walls
    023–5 days

    Manufacturing

    The window is manufactured to individual dimensions after the order is confirmed.

  3. A worker's hands work with the lower profile of a white PVC window frame on the sill
    03A couple of hours

    Removal

    The old frame is carefully removed, the opening is cleaned and prepared for the new structure.

  4. A finished white PVC window with a clean sill and reveals in a bright room
    04Several hours

    Fitting and finishing

    The new window is installed to GOST with joint insulation, then the window sill, drip sill and reveals are fitted.

Good to know

PVC Window Installation in Shymkent from Our Own Crews with a 5-Year Warranty

We handle pvc window installation shymkent homeowners can book with a free measuring visit, our own installers and a 5-year warranty on the fitting. We measure the opening, help you pick the profile, glass unit and fixings, then install and adjust the sashes. You pay after installation.

Repair or a full window swap, deciding by the state of your opening

Repair and replacement are decided by the condition of the frame, sashes and glass unit, not by the age of the window. Below is what can be fixed and what has to be swapped out.

When repair still makes sense and what it covers

We repair and adjust PVC windows as a real alternative to replacement, with a 1-year warranty on the work and the parts we swap. Most call-outs are a dropped sash, worn hardware, a hardened seal or a handle that no longer latches — all fixable without touching the profile. We re-hang sashes on their hinges, replace the rubber seal, fit new handles and locking points, and adjust the pressure so the sash closes evenly on all four sides. A pane that is still clear and dry stays in place. A window that still closes tight and holds its geometry usually needs adjustment and a fresh seal, not a new frame — replacing it early throws away a sound structure.

Signs that the frame or glass unit is past saving

  • Cracked profile: a break in the plastic wall or a bent reinforcement means the frame no longer holds its shape.
  • Foggy pane: condensation between the layers is a sealed-unit failure, not dirt, and the desiccant is saturated.
  • Loose glazing bead: a bead that springs out lets water behind the glass and damages the channel.
  • Sash that will not sit square: opened corner joints and drag after adjustment mean the profile has moved.
  • Soft frame base: a sill that crumbles under a screwdriver cannot carry new hardware.

How pvc window installation shymkent starts with a free measuring visit

A measuring visit is not only about reading the opening. It is where the profile, the glass unit and the fixings get chosen, and where the price is locked into the order.

What the measurer checks and why the size is critical

Our measurer comes at a convenient time, takes the opening sizes and helps choose the design, glass unit and fixings, and the visit is free. He records the width and height at three points on each side, checks how far the walls are out of square, and notes the sill depth, the reveal and the condition of the old frame. On site he settles the profile and the glass unit against the room, the sun side and the dust load, then matches the fixings to the wall material and the floor level. Every pvc window installation shymkent begins with this measuring visit, so the sizes are agreed before anything is ordered. An opening measured to the millimetre leaves the right mounting gap for foam and fasteners; guess the size and the window either jams against the reveal or leaves a draughty gap that no sealant hides.

How the order and the fixed price are set after measuring

We fix the price in the order after measuring, so the figure you agree is the figure you pay, and you settle it after installation by cash, card or Kaspi. The measurer writes the profile, glass unit, fittings and fixings into the order on the spot, and the same sheet goes to the workshop as the cutting list. Nothing is ordered before you sign it, which means the quote and the finished window carry identical specifications. Because the price is locked at the measuring stage, any change to the profile or glass unit is agreed before work starts — not discovered on the day of fitting. Keep the signed order: it is the document our crews and your claim both refer back to.

How pvc window installation runs on site and how the window is fixed

The crew works to a laser level, matches the fixing to the opening and the floor, foams the joints and adjusts the sashes before handover.

The fitting steps from removal to the final adjustment

Our installers remove the old window, set the new frame by laser level, fix it, foam the joints, refit slopes and sill, then adjust the sashes before handing over. Demolition comes first: the old sashes come out, and the opening is cleared of loose plaster and old foam so the new one has clean edges to sit against. The product is levelled in two planes, fixed through the profile, and the gap is filled with mounting foam in one pass. Slopes and window sills go back on after the foam cures, and the sashes are adjusted for even pressure along the seal. Adjusting the sashes on the day is what catches a frame that settled during foaming — leave it and the first cold snap shows up as a draught along the opening edge.

Anchors, mounting plates or foam, choosing the fixing for the opening

How each fixing holds a window frame in place
FixingBest forWhat it does
AnchorsSolid brick and concretePull the profile tight to the wall
Mounting platesUpper floors, narrow piersSpread load across the masonry
FoamEvery joint, all openingsSeal and insulate, never hold
CombinationWide or uneven openingsAnchor plus plate for stability

Choosing a profile and glass unit for the Shymkent heat and dust

Southern sun and fine dust load a window differently from cold and wind. What matters here is not only the number of chambers in the glazing, but also the frame, the seal and how tightly the assembly keeps grit out.

Single or double glazing and when energy-saving glass pays off

A double-chamber unit suits most flats in the city for warmth and noise, while energy-saving glazing earns its place on the sun-facing and winter-cold sides. A single chamber is lighter and cheaper, but it lets more solar warmth through and muffles street noise less reliably. Energy-saving panes carry a low-emissivity coating that reflects warmth back into the room, which cuts the load on an air conditioner in July and slows loss on clear winter nights. The upgrade pays off unevenly across one flat. On a south-facing wall the gain from coated panes is smaller than on the shaded north side, so spend the upgrade where the temperature swing actually bites, and keep the sunny rooms on a standard double unit.

Profile, seal and hardware that hold up to dust and heat

We fit PVC profiles with EPDM or TPE seals and quality hardware, and we replace the gasket in windows of any maker, including KBE, Rehau, VEKA and Provedal. That strip is what separates a quiet window from a whistling one: EPDM and TPE stay elastic through summer instead of hardening like cheap rubber, and the glazing bead holds the pane tight so grit cannot creep behind it. Fittings matter too, because tilt-and-turn mechanisms with steel stays keep the sash aligned after years of daily opening. Dust wears a gasket faster than high temperature does — one that has gone hard lets grit past and the fittings start to drag, so this strip is the part to check first each season.

Warranty, payment and what keeps the guarantee valid

A guarantee holds up when the people who gave it are the ones who fitted the window. Below are the terms we work to, how payment runs, and what to do if something goes wrong later.

What the 5-year fitting warranty actually covers

We give a 5-year guarantee on window installation, a 3-year one on glass unit replacement and a 1-year one on repair, covering labour and the parts we replaced. The period depends on the job, not on the product name: a full fitting is covered for five years, a new sealed unit for three, and a repair call-out for one. Keep the order sheet — it records the scope and the fixed price agreed after measuring, and it is what a claim is checked against. A guarantee is only as good as the crew behind it — a direct installer who fitted the window answers for it, while a middleman has to pass the claim down the chain.

Payment after installation and how to raise a claim

You settle after installation by cash, card or Kaspi, and if a sash starts to stick or the glass fogs, message us on WhatsApp and we reply within 5 minutes, seven days a week. Nothing is due up front: the crew finishes the fitting, you check the sashes, the seals and the drainage, and only then do you pay. The sum stays as fixed in the order after measuring, so the amount you agreed is the amount you hand over once the job is done. Report a sticking sash early — most fitting faults are a quick adjustment within the guarantee, but left through a season they wear the hardware and turn into a bigger task.

How to choose a PVC window installation for heat and dust

A few decisions shape the whole outcome of a window job. Here is what to hold onto once the tape is put away and the last slope is sealed.

  • Repair or replace: judge the frame and glass unit by their condition, not the age of the window.
  • Sizing first: a free visit sets the exact dimensions, the design and the price fixed in the order.
  • Fixings and foam: anchors, plates or foam are chosen for the opening, and that choice controls draughts.
  • Glass unit: the glazing follows the wall's orientation, so a sun-facing room asks for a different build.
  • Paperwork: confirm the written warranty terms and payment after installation before any work starts.

Questions about PVC window installation in Shymkent

Repair, double glazing, winter fitting, PVC profile

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can a window be repaired instead of fully replaced?

Yes, if the profile and sashes are intact and the issue is with the fixings, seal or sash misalignment, a repair will solve it. Replacement is done when the frame is cracked, the double glazing has fogged up inside, or the opening freezes through.

02Can just the double glazing be replaced rather than the whole window?

Yes, if the profile and sashes are intact and the double glazing has fogged up inside or is broken, we replace only that. The warranty on double glazing replacement is three years.

03How does window replacement work in winter and will it freeze the apartment?

Replacement is also done in winter: dismantling and installation are carried out without long delays so the opening stays open as briefly as possible. The work sequence and timing are confirmed during the free measuring visit.

04Which PVC profile to choose so the window doesn't warp from heat?

The profile and colour are selected during the free measuring visit, taking into account the side of the building and the size of the sashes. A light-coloured profile heats up less in the sun than a dark one, so it is usually recommended for the south side.

05How does window replacement in a khrushchyovka differ from one in a new building?

In a khrushchyovka, the opening is often uneven and the old wooden frames are present, so careful dismantling and levelling are needed. In a new building, the openings are more even, but there can be voids in the joints, and installation is done with sealing all around.

06Where do the old frames and glass go after dismantling?

It is best to clarify this with the technician during the free measuring visit. That way you will know in advance who removes the dismantled frames and glass and when, so you are not left with them in the apartment.

Reviews of PVC window installation in Shymkent

5,0based on 97 reviews on platforms
All reviews