Seal
Under the southern sun the rubber hardens and cracks, and silicone restores its elasticity. From 750 ₸ per linear metre.


Seal
Under the southern sun the rubber hardens and cracks, and silicone restores its elasticity. From 750 ₸ per linear metre.

Hardware
Outdoor dust mixed with oil turns into an abrasive — we clean it out and re-lubricate. From 1 250 ₸ per sash.

Drainage
Spring rains quickly fill clogged grooves, and we clean them as part of the full service from 10 000 ₸ per window.

Office windows
We adjust the sashes so the cool air doesn't escape through gaps. Sash adjustment — from 3 000 ₸.

The whole flat
In one visit we go through all windows and the balcony door. Window service for a flat costs from 6 600 ₸.

5,097 reviews on review sites
In the south, summer is the hardest time for windows: sun, dust and air conditioning work against the rubber and mechanisms.
In summer the frame on the sunny side heats up strongly, the seal dries out and loses its elasticity, and street dust clogs the hardware. The sash starts to move stiffly, and the cool air from the air conditioner escapes through gaps.
That's why the main part of the visit is care: the technician cleans and lubricates the mechanisms, treats the rubber with silicone, clears the drainage after spring rains and sets the seal. In winter, when the winds blow, he switches the sashes to the tight mode.

treatment per linear metre of seal
all windows in a flat in one visit
warranty on work and parts
Four problems that technicians in Shymkent meet more often than others.

In summer we loosen the seal so the rubber isn't pressed flat, and bring back the tight setting for winter.
We clean dirt out of the plates and locking pins and lubricate them, so the handle turns smoothly again.
We go through every sash, the balcony door and check everything against a single checklist.
We treat the seal with silicone and offer to replace cracked sections.
Choose what you need or let the technician decide: they will tell you what is important to do now and what can wait.
per linear meter

We clean and impregnate the seal so it does not crack in the sun.
per sash

We remove dust and old grease from the mechanism and apply new lubricant.
per window

We loosen the pressure for the hot season and check that the sash does not let in drafts.
per window

Adjustment, lubrication, rubber and drainage for one window in a single visit.
per piece

We replace a faded or cracked handle with a new one for your profile.
The amount depends on the number of sashes and selected services and is known before we start.
| Type of work | Price |
|---|---|
| Cleaning and lubricating the sealrubber in the sun | from 750₸ per linear metre |
| Cleaning and lubricating the hardwareoutdoor dust | from 1 250₸ per sash |
| Full window serviceincluding drainage | from 10 000₸ per window |
| Window service for the whole flatall windows and the door | from 6 600₸ per flat |
| Seasonal maintenance (winter/summer)gentle summer seal | from 3 000₸ per window |
| Basic sash adjustment during servicingstiff movement | from 3 000₸ per sash |
| Balcony door adjustmentbalcony door | from 6 000₸ per item |
| Draught-proofingwinter wind | from 3 500₸ per sash |
| Window handle replacementhandle faded or cracked | from 2 750₸ per item |
| Winter (slot) vent installationventilation without opening the sash | from 7 600₸ per item |
| Thermal imaging inspection of windowswhere it heats up or draughts | from 9 000₸ per job |
| Call-out and inspection by a technician (no repair ordered)inspection only | from 3 600₸ per job |
The price is fixed in the order after measurementMeasurement and consultation are freePayment after work: cash, card, Kaspi
Order window maintenanceConditions that do not depend on the order size.
send a photo of the window and the technician will advise what is wrong
for completed work and replaced parts
checking the windows: cash, card or Kaspi
the amount is fixed in the order after measurement
convenient to schedule a visit on Saturday or Sunday
seal for KBE, Rehau, VEKA, Provedal and other brands
plastic, wooden and aluminum windows
we make them ourselves and install them during the same visit
Four steps after which the window works like new.

You send a WhatsApp message describing the issue: the window is stiff, the rubber is cracked, or there is water in the frame.

The technician opens each sash, checks the mechanisms, seal and drainage, and gives the price before starting.

Cleans and lubricates the hardware, treats the rubber, clears the frame grooves and sets the pressure for the season.

You open and close the windows in all modes yourself and pay when everything is satisfactory.
Good to know
We handle window maintenance in Shymkent as a direct contractor with our own fitters, not through a middleman. We adjust and repair sashes, replace seals and glass units, fit child-safety restrictors and make mosquito screens to size. Measuring and consultation are free, you pay after the work, and repair carries a 1-year warranty.
A window rarely fails all at once; small symptoms appear first, each pointing to a different cause. Here is what each sign means and when adjustment suffices.
| Symptom | Likely cause | Usual fix |
|---|---|---|
| Sash scrapes the frame | shifted hardware geometry | adjustment |
| Draught when closed | worn or flattened seal | seal replacement |
| Handle turns hard | dry or misaligned mechanism | adjustment and lubrication |
| Fog between the panes | failed glass unit | glass unit replacement |
| Loose hinge or sagging corner | worn hinge part | part replacement |
Maintenance is a sequence of steps from your first message to the final check, with each stage explained and what falls outside the visit.
We reply on WhatsApp within 5 minutes, the measurer comes at a time that suits you, and the fitter checks the result with you before leaving. Measuring and consultation are free: the measurer takes the sizes, looks at the profile and the floor level, and helps choose the mesh and fastenings. Window maintenance in Shymkent then moves to our own fitters, who adjust the moving parts, test the pressure and clean the mechanism on site. Just clear access so the fitter can run a pressure check around the whole perimeter. Note which panels stick, so the technician can reproduce the problem rather than guess.
Most adjustment and seal work is done on site while you stay home, and a framed mosquito screen made to your size takes 10-15 minutes. A pleated screen is a longer bench job at 40-60 minutes, and the worker tells you the estimate before starting so you can plan the day. You stay in the flat throughout — no need to empty the room or move furniture beyond the approach to the opening. If a job runs past the quoted time, the specialist warns you in advance. The visit is easiest to schedule when you name the panels that misbehave and send a photo of the handle on WhatsApp.
Seals and closing pressure wear out first, causing most draught complaints. Here is how to recognise a worn gasket and keep parts working longer.
A seal that stays flattened after you press it, or feels hard and cracked, is worn out rather than dirty. Run a fingertip along the sash edge: a healthy strip springs back within a second, while a tired one keeps the dent. Grey marks on the rubber are normal, but a gasket that has lost its shape lets cold air through even when the handle is turned fully. A sash that still pulls tight against the frame usually needs adjustment alone, whereas a strip that crumbles when rubbed cannot be saved by tightening. Washing brings back the look, not the elasticity — if closing pressure does not return, replacement is due.
Some maintenance follows the calendar, some follows residents. We cover cold-season preparation and child safety so the unit lasts longer and stays safe.
| Option | What it is | Good for |
|---|---|---|
| Framed guard | Standard or UltraVue fabric in a painted frame | regular windows and vents |
| Pleated guard | folding fabric in a slim frame | doors and balconies |
| Anti-Cat (Pet Screen) | reinforced vinyl fabric | homes with pets |
| Anti-Pollen (Poll-Tex) | fine 0.25×1 mm fabric | allergy season |
| Restrictor or lock | limits how far a leaf opens | child safety |
The market is full of middlemen and handymen, so know who performs the job and what the warranty covers before anyone touches your glazing.
We work as a direct contractor with our own fitters, so the people who measure your unit are the same ones who service it. The measurer arrives at a convenient time, takes the sizes and helps you choose the design, mesh and fixings on the spot instead of passing a note to a stranger. Because the visit, the parts and the installation stay in one pair of hands, nobody blames the next crew when something does not line up. With a direct contractor, responsibility for the result is not spread across subcontractors, so there is someone to hold to the outcome.
A maintenance visit resolves most window problems in a single session, but the outcome depends on knowing what to ask for and when to act.
Order, seal, inspection, measuring
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, the technician checks every sash and the balcony door, inspecting the hardware and seals. It is more convenient and faster than calling them out separately for each window.
If the rubber has become hard, cracked, come away from the profile, or the window still lets in draughts after lubrication, the seal needs replacing. It is easy to check: press it with your finger — an elastic seal will spring back, while a hardened one will stay dented.
In a dry and hot climate, rubber dries out faster, so it is worth checking every season, and replacing usually every few years — it depends on the window and care. If the seal is lubricated regularly, it lasts longer.
Yes, after installation and the first months of use, it is worth checking the compression and adjustment: during this time the sashes settle and may start to let in draughts. Preventive maintenance right away extends the service life of the hardware and seal.
Even on a properly working window, the technician checks the smooth movement of the sash, the tightness of the seal around the perimeter, the condition of the seal and the hardware fixings. Minor issues are easier to fix right away than to wait for draughts or catching on the frame.
The measurer will come at a convenient time, inspect the windows, take measurements and help you choose the necessary work. The measuring and consultation are free, and the price is fixed in the order after the inspection.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp