Key-lock handle
Locking handle with a set of keys — from 3 650 ₸ per pc. A child cannot open the leaf without the key.


Key-lock handle
Locking handle with a set of keys — from 3 650 ₸ per pc. A child cannot open the leaf without the key.

Button handle
Rotation is blocked by a button — from 3 400 ₸ per pc. Suitable for a kids' room.

Double-sided
Handle on both sides of the leaf — from 30 000 ₸ per pc. Convenient for closing the balcony door from outside.

Handle replacement
Removal of the old handle and fitting of a new one — from 2 750 ₸ per pc. Takes up to 15 minutes.

Blocker
Locks the handle to prevent rotation — from 2 800 ₸ per pc. Fitted on the leaf without replacing the handle.

5,097 reviews on review sites
A locking handle turns an ordinary window into a key-locked leaf: rotation is blocked by the cylinder, and the window cannot be opened from outside.
Inside the handle body there is a rotating mechanism with a cylinder. The key turns the cylinder and locks the handle in the closed position — the leaf stays locked even if a child reaches the handle.
The leaf is locked for two reasons: so a child cannot open the window by themselves and so no one can get into the apartment through the window from outside. The key is kept out of a child's reach, and if lost, the cylinder or the whole handle is replaced.

handle with key and a set of keys
fitting on the leaf after measuring
warranty on work and replaced components
The handle is attached to the leaf through a mounting point in the profile: two screws under the decorative cover and a pin of the rotating mechanism. The mounting size and rosette type depend on the window profile.

The decorative cover is removed, revealing two screws. They are unscrewed to remove the old handle and fit a new one.
The distance between fixing points is standard for most profiles. If the size does not match, the technician selects an adapter rosette or another handle model.
Reinforced handles with different fixings are used on balcony doors and aluminium profiles. The surveyor selects the model to match the profile.
If the fixings don't match, the technician selects an adapter socket so the new handle fits without modifying the profile.
Five versions for different needs: child protection, balcony access, office window. The surveyor will advise which model suits your profile.
Locking · set of keys

Rotation is locked with a key. A child cannot open the sash without the key.
Child-safe · no key

To turn the handle, you need to press the button. No key to lose.
Balcony door · both sides

Handle on both sides of the door leaf. Convenient for closing the door from outside.
Rotation lock

The blocker prevents the handle from turning. Fits on the sash without replacing the handle.
Standard version

A standard handle to replace a broken or loose one. Removal and installation included.
Price list for products and installation of locking hardware.
| Type of item | Price |
|---|---|
| Lockable window handle with keylocking, with a set of keys | from 3 650₸ per pc |
| Window handle replacementremoval of the old handle and fitting of a new one | from 2 750₸ per pc |
| Double-sided handle for balcony dooron both sides of the leaf | from 30 000₸ per pc |
| Window handle (product)standard version | from 3 400₸ per pc |
| Door handle replacementfor balcony door units | from 3 500₸ per pc |
| Handle rotation blockerlocks the handle to prevent rotation | from 2 800₸ per pc |
| Penkid lock with cableextra protection for the leaf | from 2 150₸ per pc |
| Comb limiter with installationholds the leaf in the ventilation position | from 1 050₸ per pc |
| Installation of a blocker or child lockfitting on the leaf | from 2 750₸ per pc |
| Installation of a balcony latchfor balcony doors | from 3 750₸ per pc |
Price is fixed in the order after measuringMeasuring and consultation — freePayment after installation: cash, card or Kaspi
Book a measuring visitFacts about our work: warranty on window repair, free measuring, payment after installation.
on work and replaced components
measuring and consultation free
cash, card or Kaspi
cities of Kazakhstan
daily 09:00–22:00
we respond within 5 minutes
we work across Kazakhstan
the handle is selected to fit the mounting size and profile type: plastic, wood, aluminium
Four steps from request to checking the handle.

Write on WhatsApp or call. We agree on a convenient time for the technician to visit.

The technician measures the mounting point and selects a handle model for the profile.

Removes the old handle, installs the new one and checks the fixing.

You choose the handle version to match the profile colour and task: child-safe, balcony or office.
Good to know
We supply and fit lockable window handles in Shymkent, choosing the fixing to match your profile and floor. A free measuring visit confirms the right handle, the fitter installs it on the spot, and you pay only after installation by cash, card or Kaspi. Window repair work carries a one-year warranty on labour and replaced parts.
A lockable handle is a lever with a built-in lock, not a separate add-on. It replaces the plain fitting and locks the sash with a key, so the window stays shut even when nobody is watching it.
This type of fitting carries a small lock inside its body, turned by a key through the core, so the sash cannot be opened from outside or by a child inside. Turning it rotates a cylinder that releases or blocks the spindle, the square bar linking the fitting to the window mechanism. One turn and the lever stops moving; the casement stays latched to the frame. The mechanism sits in the body itself, so from the room side it looks like an ordinary fitting and needs no extra drilling. This is a practical answer for a ground-floor flat, a rented apartment or a room where a child reaches the casement. The mechanism stops the lever turning, not the glass, so it works best paired with a shut and secured casement rather than as a stand-alone anti-burglary device.
| Device | What it does | Best for | Key needed |
|---|---|---|---|
| Lockable handle | Locks the fitting with a key | Locking the casement when out | Yes |
| Child blocker | Stops a child turning the lever | Homes with small children | No |
| Opening restrictor | Caps how far the casement opens | Ventilation with a safe gap | No |
The part has to match the profile and the opening leaf, not just the colour of the room. The measurer checks both before anything is ordered.
We fit lockable window handles on plastic, wooden and aluminium windows and doors, including balcony doors, loggia leaves and outbuilding units. On PVC sashes the plate and spindle follow the standard recess, while timber and aluminium often sit deeper or shallower, so length is measured rather than assumed. Loggia and outbuilding units add a second variable — they face draughts and temperature swings, and a unit that rattles there will not hold the lock tongue squarely in the keep. The measurer notes the material, the rebate depth and the existing screw holes at the free visit, and the part is ordered to that record. Aluminium and timber leaves often need a different base and shaft than PVC, so the profile is checked before the choice is made rather than after.
The measurer checks the profile and the floor, then chooses the fixing and spindle so the lever sits correctly and the lock engages cleanly. Brand matters here: KBE, Rehau, VEKA and Provedal units differ in wall thickness and in how far the recess sits from the edge, and each takes its own screw pattern. Floor level decides the rest — higher up the leaf is thinner and the fixing sits flush without protruding into the sash, while ground-floor doors carry more load and need a longer plate. In our practice the specialist carries the common lengths on the visit, so the choice is made against the actual opening, not a catalogue photo. A handle that almost works usually fails at the shaft or the seat, so getting it right at measuring saves a second visit.
Most people fit a lockable handle for a child first and security second. The same mechanism serves both jobs, so it helps to look at each scenario on its own terms.
A keyed fitting keeps a child from turning the lever and opening the sash, because it has to be unlocked before anything moves. On our fittings the cylinder sits inside the base, so a small hand meets a dead stop until it is unlocked. That matters on second floors and above, where a low sill and a curious toddler are the usual reason families call us. We fit these units on plastic, wooden and aluminium sashes alike, and the lock works independently of the tilt position, so the leaf cannot be swung wide while it is tilted for air. Keep it out of reach and store it where an adult can still grab it in a hurry, since a locked fitting is only as safe as where that small piece of metal lives.
A window fitting with a key raises the effort needed to open a window from outside, but it is not a full anti-burglary system on its own. The cylinder stops a hand reaching through a broken pane or an open reveal from simply flipping the lever; an intruder then has to deal with the sash lock and the frame itself. On a ground floor or a first level above a roof or ledge, the fitting only covers one opening point. Pair it with a locked sash and, at ground level, a restrictor or grille, since the lever protects the opening point, not the whole window. For a flat above the second storey it is usually enough on its own, and residents of Shymkent often stop there.
The visit and the fitting are the part people worry about most. Measuring costs nothing, the measurer arrives when it suits you, and the fitting itself goes on during the same appointment.
Measuring and consultation are free, and the measurer comes at a convenient time, takes the sizes and helps choose the fitting, base and fixing. He checks the profile depth and the distance between screw centres first, because a unit with the wrong spindle length will not seat flush against the sash. On top of that, the visit covers the base plate, the cylinder and the screws, and our specialist matches all of them to the sash weight and the way the window opens. We reply on WhatsApp within five minutes if you want to send a photo of the profile before the visit. Ask about colour at the visit, since the frame can be matched to your windows rather than left as a stock finish.
The fitter removes the old unit, fits the new one and checks the lock on the spot, so most jobs are done in a single visit. Two screws hold a standard model, and the swap itself takes minutes once the spindle length is confirmed against the old part. The fitter then turns the key through a full cycle, opens and closes the sash and listens for the catch engaging. Lockable window handles in Shymkent are fitted the same day the measuring is confirmed, and the team works seven days a week. A quick test of the lock and the sash close before the fitter leaves catches a misaligned spindle while they are still there.
The last questions are about trust and what happens later. Here is how the warranty works, how you pay, and what to do if a key goes missing.
Window repair work carries a one-year warranty on labour and replaced parts, and you pay after installation by cash, card or Kaspi. The warranty covers the fitter's work and any parts we swap, so a fitting that loosens or a lock that sticks after installation is put right under that term at no extra charge. Payment is settled only once the fitting is on and you have tried the key yourself, which keeps the order simple for residents of Shymkent. Booking runs through WhatsApp, where we reply within five minutes, and the workshop is open seven days a week, so a visit can be arranged for the same week rather than waiting for a weekday off. We confirm the slot and the fitter's arrival window in the same chat, so you know when to be home.
If the key is lost or the lock jams, the fitter replaces the lock core or the whole unit rather than forcing the sash, and checks the spindle while there. Forcing it when stuck usually bends the spindle or cracks the base plate, and then a simple core swap turns into a full handle replacement. A jammed lock is often a spindle or base problem rather than the lock itself, so the fitter checks the fit before swapping parts. On most profiles the core comes out with a single retaining screw, which means the lever body, colour and screw spacing stay as they are. Keep the spare key that ships with every lockable handle in a drawer rather than on the window sill, where sun and dust wear the cuts.
A handle with a key is a small part that decides how safe a sash is, so the last word belongs to the fit, the fixing and the habits at home.
Locks, security, compatibility, ventilation
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, but aluminium systems need a model with the right shape and fixings for a narrow profile. A standard plastic handle often does not fit, so choose one designed specifically for aluminium.
Unlock the handle with the key first, then turn it to the ventilation position. For regular partial opening, consider installing a limiter.
Sliding systems usually require separate models with a different mechanism; a standard turn handle does not work there. Whether your design is suitable will be determined by the surveyor based on the type of hardware.
Yes, many models allow you to choose a unique key for each handle. Just specify this when ordering so we can select the right options.
No, while the lock is closed the sash will not turn, and a child cannot open it. Keep the key out of reach, as the lock itself does not protect against someone who finds the key.
No, in most cases it is enough to replace only the handle; the sash hardware remains the same. However, the technician will check during the measuring visit whether the model fits your window.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp