Craftsman showing a white window blocker with a cable in the living room
Price from 1 200 ₸ per pc.We'll select a model for your hardware and install it at a time that suits you.Calculate

Window Locks for Child Safety in Shymkent

For child safety · handle rotation

Handle rotation blocker

Prevents a child from turning the handle and opening the sash. Price from 2 800 ₸ per pc.

Hand turns the key-locked handle of a plastic window
GoogleYandex MapsZoon

5,097 reviews on review sites

What window locks for child safety are in Shymkent

A blocker is a mechanism that prevents turning the handle or opening the sash without an adult's knowledge.

How the protection works

A window blocker is a small device attached to the frame or sash that locks the handle or limits sash movement. Unlike a comb restrictor, it doesn't just fix the angle but specifically prevents a child or pet from opening the window.

Why a freely rotating handle is dangerous: on a turn-only sash, a child can turn it and open the window fully; on a tilt-and-turn sash, they can switch it to ventilation mode, where the gap is wide enough to climb through. A blocker rules out both scenarios.

Closed white window in a dining room
from 1 200 ₸

sash blocker price

from 2 750 ₸

blocker installation

4 types

handle rotation, sash, concealed, cable

5 options
With keyWithout keyConcealedSurface-mountedCable

How child safety on the sash is mounted in Shymkent

Fixings are selected for the window profile and hardware: it's important that the blocker doesn't interfere with closing or damage the profile.

A hand turns the key in a white lock on the window sash
  • 01Attachment to frame and sash

    Surface-mounted models are fixed with screws to the frame and sash. The surveyor checks that the fixings don't hit the reinforcement.

  • 02Selection for the window profile

    Different models suit plastic, wooden and aluminium windows. The width of the hardware groove and the handle type are taken into account.

  • 03Concealed installation in the groove

    A concealed blocker is mounted inside the hardware groove and is invisible from outside. It requires compatibility with the hardware.

  • 04Blocker replacement or repair

    If the mechanism is worn or broken, it is replaced. Ask the technician about compatibility of the new model with your hardware.

Mesh types for child locks and sash restrictors

We select a model for the task: prevent a child from opening the window, allow ventilation only, or hide the protection from prying eyes.

Sash blocker

Surface-mounted · for turn-only sashes

Closed white window in a dining room

Locks the sash in the closed position. Simple installation on frame and sash.

from 1 200 ₸/pc.

Handle rotation

With key · locks the handle

Hand turns the key-locked handle of a plastic window

Prevents turning the handle without a key. Suitable for windows with children.

from 2 800 ₸/pc.

For sliding windows

For sliding sashes · loggia

A technician holds a metal blocker for a sliding aluminium window

Locks the sliding sash. Installed on sliding windows and doors.

from 4 000 ₸/pc.

Child lock

Surface-mounted flag · with key

A craftsman stands by a closed white window in a bright room

Flag lock with key. A child cannot open the window on their own.

from 3 250 ₸/pc.

Cable restrictor

With lock · limits movement

Craftsman holds a white cable window opening limiter, window blocker

Limits how far the sash can open to the length of the cable. Key included.

from 2 500 ₸/pc.

Window locks for child safety prices in Shymkent

The table shows the cost of products and installation; the exact amount will be confirmed by the technician after measuring.

Type of itemPrice
Sash blockersurface-mountedfrom 1 200₸ per pc.
Handle rotation blockerwith keyfrom 2 800₸ per pc.
Blocker for sliding windowsfor sliding sashesfrom 4 000₸ per pc.
Blocker installationfittingfrom 2 750₸ per pc.
Child safety window locksurface-mounted flagfrom 3 250₸ per pc.
Cable restrictor with lockwith keyfrom 2 500₸ per pc.
Penkid lock with cablecable typefrom 2 150₸ per pc.
Latch lock installationfor window or doorfrom 6 800₸ per pc.
Window burglary protectionfull set of measuresfrom 3 150₸ per job
Window handle with keywith lockfrom 3 650₸ per pc.
Comb restrictor with installationwith fittingfrom 1 050₸ per pc.

The price is fixed in the order after measuring.Measuring and consultation are free.Payment after installation: cash, card or Kaspi.

Order a blocker

Why customers order sash protection from us in Shymkent

Correct installation ensures reliable fixation and keeps the hardware working.

Experiencesince 2012

we work across Kazakhstan

Repair warranty1 year

for work and replaced components

Measuringfree

the measurer will come at a convenient time

Installationincluded

we deliver and install on windows and doors

Paymentafter installation

cash, card or Kaspi

Scheduleno days off

we work every day

Window installation warranty5 years

for installation work

Warranty1 year

for work and replaced components

How we make and install window locks for child safety in Shymkent

From request to checking the work — four steps.

  1. A hand holds a smartphone with a dark screen by a white window, measuring the sash
    01Request and measuring

    Request and measuring

    You leave a request, the technician comes and measures the windows free of charge, clarifies the task.

  2. A tape measure measures the window opening of a white plastic window, a hand holds the tape
    02Choosing a model

    Choosing a model

    Together you choose the blocker type for the hardware and profile, discuss whether a key is needed.

  3. Hands assemble a white blocker with a screwdriver on a workbench, tools around
    03Agreeing the installation location

    Agreeing the installation location

    Before the technician's visit, you specify which sashes and where to install the blockers, how many products are needed.

  4. A hand locks the white blocker on the sash below the handle with a key, a short cable runs to an anchor on the frame
    04Installation

    Installation

    The technician installs the blocker on the sash or handle, checks compatibility with the hardware.

Good to know

Window Locks for Child Safety in Shymkent

We fit window locks for child safety in Shymkent with our own fitters, a free measuring visit and payment only after installation. The measurer checks your profile, sash type and floor, then matches the device and fixing to your window. You get a fixed price after measuring and a one-year warranty on the work and replaced parts.

Which device stops a child opening the window

Several devices can keep a child away from an open casement, and each one solves a different task. Below we compare what a restrictor does against a key lock and help you pick by your daily routine.

Lock, restrictor, key handle or cable and what each one does

A restrictor limits how far the casement opens for ventilation, while a key lock blocks it completely until an adult turns the key. The restrictor is a small arm or steel line that lets the casement swing out a few centimetres only — enough for fresh air, too narrow for a child to slip through. A key-operated bolt or locking handle keeps the casement shut and needs a key to release it, so it stays closed even if a child pushes and pulls. A cable version works like a restrictor but with a steel line, which suits narrow openings. A lever with a built-in key mechanism replaces the standard fitting and holds the casement in the closed position. The right choice depends on whether you want the opening to keep airing safely or to stay shut, so pick the part by the daily routine, not by looks.

Which child safety locks suit your child and your sash

We match the device to the casement type and the child's age, so a tilt-and-turn sash in a nursery usually gets a restrictor plus a key lock. On casement sashes and small fortochkas we often fit a single restrictor, because the opening is narrow and a toddler cannot reach the handle. For a child who has just learned to climb, a key-operated handle makes more sense — it removes the temptation to open it at all. We take the profile into account too: the fixing has to sit on the frame without blocking the handle or the ventilation flap. Our measurer checks the casement, the frame and the child's reach before choosing the device, then fixes the price in the order. A child who has just learned to climb reaches higher than a toddler, so the fixing height matters as much as the device itself.

Matching window locks for child safety to your window and floor

A guard is matched to a specific profile, sash and level rather than picked in general. Here is how that works on plastic, aluminium and timber, and what changes for a balcony door.

How the fixing is chosen for your profile and floor

Our measurer picks the mounting to suit your profile and floor, choosing between Z-brackets, pins or magnets rather than forcing a single type onto every frame. A narrow rebate takes slim pins that sit flush, aluminium often needs Z-brackets that hook over the edge, and timber holds magnetic catches well where drilling is unwanted. Height matters too: higher up, a wider opening swings with more force, so the bracket is chosen for that load. We check rebate depth, the gap between leaf and surround, and the sill before deciding. A higher floor and a wider sash change the load, so the same lock can need a different bracket downstairs and upstairs. For window locks for child safety in Shymkent, the fixing is matched the same way to your profile and floor.

Plastic, aluminium, wooden windows and balcony doors

Frame types and the fixing each one takes
Window typeWhat we checkDevice option
PlasticRebate depth, leaf gapPins or magnets
AluminiumThin section, edge hookZ-brackets
WoodenScrew hold, finishScrews or magnets
Balcony doorDaily push loadStronger fixing
Loggia glazingFrame depthMatched bracket

How strong the lock is and how it treats your fittings

Parents ask two things before buying: will the device really stop a determined child, and will the sash come out of it undamaged. Here is how strength, fittings and later removal work in practice.

Will it hold if a child leans on the sash

A correctly matched lock holds the sash against a child leaning on it, because the load goes into the frame through the fixing, not into the handle. The part bridges the opening edge and the profile at a fixed point, so pushing or hanging on it transfers force into the frame body rather than into the handle set. On a standard plastic unit the fixing sits in the frame rebate, where the wall thickness carries weight far better than any handle-mounted part. A wooden or aluminium leaf behaves the same way once the bracket is matched to the profile depth. The weak point is rarely the device body itself but an undersized bracket, which is why the measurer checks the casement before choosing the mounting.

Protecting the fittings and removing the lock later

  • Clear of the gasket: the bracket sits away from the rubber, so the sash closes evenly and the seal keeps its shape.
  • Clean screw points: fixings go into the profile where holes close up neatly, leaving no visible marks later.
  • Free mechanism: the handle and hinges stay unblocked, so the sash still opens and tilts as before.
  • Seal renewal: if the gasket is already worn, we replace window seals on windows from any manufacturer during the same visit.

Measuring, fitting and paying for window locks for child safety in Shymkent

From the first call to a finished window there is one visit by a fitter. Below is how the measuring, the fitting, the payment and the cover work in practice.

The free measuring visit and what the measurer checks

Measuring and consultation are free, and the measurer comes at a convenient time, takes the sizes and helps choose the device, the fixing and the position. On site the specialist looks at the sash profile, the frame material and the floor the unit sits on, then matches the fixing to them — Z-brackets, pins or magnets. He also checks which way the sash opens and how far a child could reach the handle. We work seven days a week, so a slot can be booked for a weekend. It pays to settle the lock position during this appointment, because shifting it later means new holes in the frame.

Fitting, payment after the work and the warranty

  • Own fitters: the lock is fitted by our own installers, so the person who measured the opening usually sets the device.
  • Payment once the job is done: you settle by cash, card or Kaspi, and the price is fixed in the order after measuring.
  • One-year cover: the installation and any replaced parts are guaranteed for a full year, labour included.
  • Weak point: a self-fitted lock often fails at the fixing rather than the device, so the cover applies to the mounting as much as the part.
  • Fixed figure: the amount agreed after measuring does not change on the day of fitting, whatever the profile turns out to be.

Airing the room, winter and everyday care

A safety device should not turn fresh air into a chore or block your cleaning routine. Below is how a child-safety window lock behaves day to day, through the cold months and during a wash.

Airing the room without letting the sash swing open

A restrictor lets the panel open a set gap for ventilation while still stopping a child from opening it wide, so airflow and safety work together. On a tilt-and-turn window the mechanism holds the moving part at a chosen angle, and the child cannot push it past that point even when leaning on the frame. A cable version works the same way but with a strap instead of a rigid arm, which suits narrow openings and balcony doors. Both leave enough clearance for regular airing in a flat without opening the whole window on a hot afternoon. The gap is fixed at installation, so tell the measurer how much airflow you usually want before the position is locked in.

Winter, washing the window and keeping the lock working

The device does not need removing for winter, and the glass can still be washed once the panel is opened within its set limit. A stiff hinge is worth a drop of lubricant rather than force. If a bracket works loose after a season of use, the mounting can be renewed without touching the frame itself. Our fitter checks the anchor points during a repair visit and swaps worn screws or pins. Wiping the mechanism and checking the bracket once a season keeps the parts smooth and catches a loose fixing before it matters. A quick look at the anchor points after the cold months also shows whether the mounting still sits tight against the profile.

What to check before buying window locks for child safety

A child-safety window lock is a small part, but the result depends on how it is chosen, fixed and looked after. Below are the points worth keeping in mind before you order.

  • Device for the sash: a lock, restrictor, key handle or cable is picked to match the sash type and the child's age, not bought by habit.
  • Fixing for the profile and floor: Z-brackets, pins or magnets are chosen for the profile and the storey, so the fitting holds where it is mounted.
  • Strength comes from the fixing: a solid body alone does not keep a leaning child safe if the fastening is wrong for the frame.
  • Free measuring, payment once the job is done: the measurer takes sizes and helps choose the design, and money changes hands only at the end.
  • Seasonal care: check the mechanism and fastenings before each season and after washing the glass, and the hardware keeps working for years.

Questions about window locks for child safety in Shymkent

Installation, safety, selection, maintenance

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can a window lock be installed without touching the handle or hardware?

Yes, surface-mounted models attach to the frame and sash separately from the handle and do not require changing the hardware. A key-lock handle is fitted instead of a standard one only when you need a lock on the handle turn; the measurer will advise what suits your window.

02What should I choose for a top-floor window to keep the sash from swinging open?

For upper floors, a cable restrictor or lock blocker is usually chosen: they prevent the sash from opening wider than set and hold it during a gust of wind. A comb is simpler but fixes only in several positions and depends on the window.

03How can I tell the lock is installed correctly and a child cannot open it?

Check it yourself: pull the sash in the locked position, turn the handle and try to open the lock without a key. The fixing should not wobble, and the mechanism should require effort a child cannot repeat.

04Do I need to remove the lock for winter, or does it interfere with closing the window?

No need to remove it: a properly installed lock does not interfere with closing the sash and works all year round. In winter, just check that the mechanism is not clogged with dust and moves freely, especially after temperature changes.

05Can one lock be chosen for all windows in the apartment, or does each sash need its own?

Usually one model is enough for all sashes of the same type, but windows in an apartment may differ in profile and width. During the measuring visit, the technician will check each sash and say where one type is enough and where another is needed.

06Who installs window locks in Shymkent with a visit and a warranty?

Our technician will come for a free measuring visit, help choose a model for your window and install it on site. We work without days off, provide a warranty for the installation, and if the mechanism breaks, we will help with repair or replacement.

Reviews of window locks in Shymkent

5,0based on 97 reviews on platforms
All reviews