Window insulation
Sealing using Swedish technology from 4 200 ₸ per linear meter. We eliminate draughts around the sash perimeter.


Window insulation
Sealing using Swedish technology from 4 200 ₸ per linear meter. We eliminate draughts around the sash perimeter.

Painting
Wooden window painting from 8 100 ₸ per window. We sand, prime, and apply paint.

Glass replacement
Broken glass replacement from 8 000 ₸ per m². We select glass of the required thickness.

Glazing bead
Glazing bead replacement and glass fixing. We restore the tightness of the window unit.

Hardware
Wooden window hardware replacement from 1 150 ₸ per unit. Handles, hinges, locking mechanisms.

5,097 reviews on review sites
Restoration and repair of wooden windows: from sanding and painting to glass replacement and insulation using Swedish technology.
Wooden window repair is a set of works to restore the frame, sashes, and hardware without replacing the entire unit. The master assesses the condition of the wood, glass, and seals, then selects the operations: insulation, painting, replacement of damaged sections, or sash adjustment.
The service includes work on the frame and sashes, glass and glazing bead replacement, installation of inter-frame seal, and hardware replacement. Separate repair is available for balcony blocks. All work is performed on-site, the master brings materials and tools.

turnkey window painting
minor on-site repair
warranty on work and components
Diagnostics, insulation, painting, replacement of a wood section, and sash adjustment — the sequence of works to restore the window.

The master inspects the frame, sashes, glass, and seals, determines the scope of work, and fixes the price after measuring.
The seal is installed around the sash perimeter on the inside, eliminating draughts and blow-through.
Damaged paint is removed, the wood is sanded, primed, and painted in several layers.
Rotten fragments are cut out and replaced with healthy wood, then sanded and painted.
A swollen or skewed sash is adjusted on-site, hinges and locking mechanisms are regulated.
Replacement of glass, glazing bead, hardware, inter-frame seal, and balcony block repair — prices per unit of work.
per m²

Selection and installation of glass of the required thickness, sealing.
per window

Glass secured with new glazing beads, seals restored.
per pc.

Handles, hinges, locking mechanisms for wooden windows.
per window

Installation of a seal between the frame and the sash.
per pc.

Restoration of a wooden balcony block, adjustment of sashes.
Prices for wooden window repair in Shymkent.
| Type of work | Price |
|---|---|
| Wooden window restoration (sanding, painting) | from 18 000₸ per m² |
| Wooden window painting | from 8 100₸ per window |
| Wooden window frame repair | from 16 000₸ per job |
| Wooden window repair and insulation | from 28 000₸ per window |
| Wooden balcony block repair | from 53 500₸ per unit |
| Wooden window hardware replacement | from 1 150₸ per unit |
| Wooden window insulation using Swedish technology | from 4 200₸ per linear meter |
| Installation of inter-frame seal | from 2 800₸ per window |
| Broken glass replacement | from 8 000₸ per m² |
| Master's visit and inspection (without repair order) | from 3 600₸ per job |
The price is fixed in the order after measuring.Measuring and consultation are free.Payment after installation: cash, card or Kaspi.
Calculate costService facts: warranty, free measuring, work seven days a week, payment after installation.
for work and replaced components
measuring and consultation are free
we accept requests every day
cash, card or Kaspi
the price is fixed after measuring
we work across Kazakhstan
available in 17 cities of Kazakhstan
we reply within 5 minutes
From request to acceptance — four steps.

Write or call, describe the problem. We reply on WhatsApp within 5 minutes.

The measurer will come at a convenient time, take dimensions and help choose a solution.

The master performs the work on site: insulation, painting, glass or hardware replacement.

Check the result: how the sash opens, whether there are drafts, whether the paint is even.
Good to know
Wooden window repair in Shymkent is done by our own crew, not a middleman. We fix sagging sashes, replace worn seals and glass units in the old timber frame, insulate draughty joints and fit mosquito screens to wooden windows. Measuring and consultation are free, and every repair carries a 1-year warranty on labour and replaced parts.
Repair is almost always possible while the geometry is intact and the timber has not rotted. Below are the signs a craftsman checks before deciding between repair and replacement.
We advise replacement when the timber has rot through the section, the frame is out of level or the sash no longer closes even after adjustment. Soft wood around the hinges and sill is the clearest warning: a fresh screw has nothing to bite into, and weatherstripping fitted over a twisted opening pulls away within a season. In those cases we quote window installation instead of patching, because a fresh frame with a 5-year warranty on installation outlasts repeated small fixes. Repair keeps the original look, but it only pays off while the wood can still hold a fastener and a seal. Past that point money spent on patching is wasted — and a wooden window repair in Shymkent on a rotten section simply delays the inevitable by a winter or two.
Draughts almost always come from a compressed seal, a sash that has dropped on its hinges, or gaps where the carcass meets the wall. We locate the cause first, then fix that cause rather than masking it.
We re-hang and re-wedge a dropped sash so it closes evenly against the frame, then replace worn seals along the entire perimeter rather than only where the draught was felt. Old wood rarely fails in one place: a leaf that has sagged for months wears the rubber unevenly, so the meeting edge, the hinge side and the corners all need fresh material. We fit EPDM, TPE or silicone profiles to match the groove depth in your timber, and pack the hinge pockets so the leaf sits square. Setting the leaf square first is what makes the repair hold.
A timber window repair moves from diagnosis to adjustment, then to the seal and the glazing, and finishes at the joints. Here is the order we follow and how much of a working day one window takes.
Most of the work is done on site with the sash in place; only a glass unit swap or a badly dropped sash needs the sash taken out briefly. A standard adjustment and gasket replacement on one window fits into a single visit, and urgent glass unit replacement we can complete within one day at a surcharge on the unit itself. A wooden leaf is heavy and the reveal around it is finished, so pulling it out for no reason risks chipping the plaster and the paint line. Keeping it seated avoids disturbing the reveal and the finish, which is why we plan the visit so the room stays usable the same day.
Sanding and painting come after the mechanical repair, once the leaf is set square and the gasket is in, so the finish is not disturbed by later adjustment. The carpenter takes back flaking coats to bare timber, fills old nail holes and cracks, and sands the frame and leaf edges smooth before any fresh coat goes on. Paint applied over a damp or poorly prepared surface peels within a season; the wood needs to be dry and the old flaking coat taken back before a fresh coat goes on. A frame that has taken in moisture near the sill needs longer to dry than the surface suggests, so the painter checks the wood with a moisture reading rather than by touch.
The gasket and the glazing are the parts that wear out first in an old timber frame, and both can be renewed without replacing the frame itself. Below is how each is chosen and fitted.
We replace the gasket on timber windows with EPDM, TPE or silicone cord, matched to the groove depth and how tightly the sash closes. We change the seal in windows of any manufacturer, including KBE, Rehau, VEKA and Provedal profiles, and pick the section by the gap that remains when the sash is shut. On timber sashes the old strip usually hardens and flattens into the groove, so the rebate no longer presses against it and air slips past the edge. A strip that is too thick stops the sash closing flush and strains the hinges; the right section is chosen by the gap left when the sash is shut.
A cracked or misted glazing is replaced inside the old timber carcass; the structure stays, only the glass and its beads come out. Misting between the panes means the sealed edge has failed and moisture is trapped inside, and cleaning the surface will not bring the clarity back. We take out the glazing beads, lift the old glazing clear of the rebate, seat the new one on fresh setting blocks and refit the beads so the sash keeps its shape. The same job restores both the view and the insulation in one visit, and the timber around the rebate is checked while the opening is bare.
Once the repair is done, the window still needs a seasonal check and protection from insects. Below we cover winterproofing, everyday care and how to pick a screen for a timber profile.
A repaired wooden window lasts longer when the gasket is cleaned, the hinges are kept lubricated and the surface is repainted before the old coat fails. Wipe the strip with a damp cloth every few months and put a drop of oil on the hinge pins once a year, since a dry hinge grinds and loosens the sash. Repaint the outer frame while the finish is still intact, because paint shields bare wood from rain and sun better than a fresh coat applied after cracks appear. Grit trapped in the groove wears the strip and the sash edge, so wiping it a few times a year saves a replacement. Keep the weep holes at the bottom clear, as blocked drainage lets water sit against the wood.
| Screen type | Fixing | When it is chosen |
|---|---|---|
| Framed | Z-brackets or pins | Standard opening, easy winter removal |
| Sliding | Guide rails | Wide sashes and balcony doors |
| Door | Hinged frame | Passage to a terrace or garden |
| Pleated | Compact track | Tight reveals and inward-opening sashes |
| Roller | Spring cassette | Sash that stays partly open |
A repair decision rests on a few checks, not on guesswork. Below is the short list worth running through before anyone touches the frame.
Repair, restoration, sash re-assembly, insulation and double glazing
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionRepair fixes a specific problem: a sagging sash, worn seal, cracked glass. Restoration brings back the window's appearance and airtightness as a whole: sanding, painting, replacing rotten sections, insulation.
Paint doesn't set and dry immediately; the time depends on the composition and the weather. You can live in the room, just ventilate and don't touch the sash until the coating is dry.
If the sash has sagged, catches on the frame, or gaps have appeared in the corners, it most likely needs re-assembly. Adjustment only helps with a slight skew when the joints are still intact.
The rotten section is cut out, healthy wood is inserted, then sanded and painted. If the rot is deep and the patch doesn't hold, the technician will honestly say that the sash or window needs replacing.
Yes, we have specialists who work specifically with wood: they repair, restore and insulate wooden windows taking into account the properties of the wood and the local climate. A technician comes to you, not an intermediary.
The service life depends on the condition of the wood, the species and how the window is cared for. With careful repair and regular painting, the window will last a long time, but the exact period can't be given without an inspection.
Yes, if the frame is sturdy and hasn't dried out, a double glazing unit is inserted instead of a regular pane — this makes the window warmer. The decision is made after inspection: such an upgrade doesn't make sense on a rotten frame.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp