PVC
We cover the foam around loggia frames with panels. From 4 700 ₸ per linear metre.


Not just panels, but seam preparation, joints, corner pieces and cleaning up
Turnkey means the full job: we trim excess foam, add insulation if needed, fit panels on three sides of the opening, close the joints with corner pieces and liquid plastic. After the work the opening looks finished.
Shymkent has many loggias and balcony units that stand without reveals after glazing. We fit them on windows, doors and loggia frames, replace loose drywall and match the colour to laminated windows.

window or door, turnkey
panels per metre
measuring visit
Four problems many people know

Installation is done, no finishing. We cover the seam with PVC panels.
We cover the cracked reveal with sandwich panels.
Mould from a cold wall. We insulate the reveal.
Condensation on cold days. A warm layer removes it.
Five items ordered most often
With insulation

Smooth, washable, no cracks.
Window or door

Three sides, corner pieces, joints.
Ready for painting

Budget option for dry rooms.
Joints

Closes gaps at the windowsill.
Outside

Drains water away from the frame.
Per metre or per opening, final price after measuring
| Type of work | Price |
|---|---|
| PVC reveals (sandwich panels), per linear metrepanel with insulation inside | from 4 700₸ per linear metre |
| Reveals for a standard window, turnkeythree sides and corner pieces | from 15 000₸ per window |
| Plastered revealswith levelling and filling | from 3 000₸ per linear metre |
| External revealsprotects the seam from outside | from 4 500₸ per linear metre |
| Drywall revealsready for painting | from 1 500₸ per linear metre |
| Reveal insulationagainst freezing and condensation | from 19 900₸ per linear metre |
| PVC windowsill fittingtogether with reveals | from 5 500₸ per linear metre |
| Drip sill fittingdrains water away from the frame | from 3 250₸ per linear metre |
| Sealing internal seams (liquid plastic)joints of frame, reveal and windowsill | from 1 500₸ per linear metre |
| Sealing external seamsprotects foam from moisture and sun | from 2 000₸ per linear metre |
The price is fixed after measuringMeasuring visit is freePayment after work: cash, card, Kaspi
Book a measuring visitWhat matters to us
we work across Kazakhstan
on WhatsApp
windows, doors, loggias
the one in the order
after acceptance
every day
to the laminated frame
cities
Turnkey process

Send photos of the openings and tell us what you want. We reply quickly.

We measure the openings, check the seam, show colors, and give you a price.

We prepare the seam, install panels and corner pieces, seal the joints, and repair the corners.

We clean up, check every opening, and you pay afterwards.
Good to know
We handle window reveal finishing in Shymkent as a direct fitter, not an agency. Our own measurer visits for free, checks the opening and helps pick the material, mesh and fixings for your window type. We fix the price in the order after measuring, and you pay only after installation.
Plastic, plaster, sandwich panel and plasterboard each behave differently under heat and on different frames. Here is what actually fits your opening and why.
| Material | Best for | Finish | Upkeep |
|---|---|---|---|
| PVC panels | Plastic windows, fast jobs | Clean white or matched colour | Wipe with a damp cloth |
| Plaster | Seamless painted look | Tinted to your colour | Refresh every few years |
| Sandwich panel | Insulated reveals | Rigid skin over insulation | Wipe, no repainting |
| Plasterboard | Curved or wide reveals | Coated after filling | Repaint when marked |
We fit window reveal finishing in Shymkent on plastic, wooden and aluminium frames, and the frame type decides which material sits tightest against it. PVC panels lock onto a vinyl frame with matching trim and hide the fixing line; plaster is built up in layers over timber where a seamless edge is wanted; aluminium needs a rigid sandwich board or a filled plasterboard skin because a thin sheet will drum against the metal. On the sun side of a building, white PVC and factory-coated panels hold their colour longest, while tinted plaster is the one that fades first. A reveal that does not match the frame's expansion under heat will open a hairline gap within a season, so the joint matters as much as the board — ask for the trim and sealant to be specified together with the panel.
Condensation and draughts almost always start at an under-insulated reveal and a poorly closed seam. Here is where the warmth actually escapes and how the weak points get closed.
A reveal sweats when its inner surface drops below the dew point, which happens when the insulation is thin and the joint to the frame is left open. Warm indoor air meets that cold plane, gives up its moisture, and the water runs down the slope onto the sill. Thin plaster over a bare wall section is the usual culprit, and so is a gap packed with foam that was never trimmed or sealed. Cold air tracks in along the same path, so the room feels draughty even with the glazing shut. Mould usually starts in the corner where the reveal meets the sill, because that is the coldest point and the hardest to seal.
The measuring visit is where size, material and price are settled at once. Here is what the measurer checks at your opening and how the agreed figure is locked into the order.
Our measurer comes at a time that suits you, takes the reveal width and depth, checks the wall and frame, and helps choose the material and fixings. Measuring and consultation are free, and the visit covers more than a tape reading: the specialist looks at how square the opening is, where the frame sits relative to the wall, and whether the surface is plaster, panel or plasterboard. He brings samples of the finishes and talks through fixings matched to your profile and floor. The order then lists the reveal material, the trim, the sealant line and the fixings, so nothing is added on site. Measuring the reveal depth, not just the width, is what stops a panel from sitting proud of the wall or leaving a gap at the frame.
The price is fixed in the order after measuring, and you pay after installation by cash, card or Kaspi. Nothing is charged at the visit itself, and the figure agreed on paper does not change once the fitters start, because the quantities come from the measurer's own numbers rather than an estimate over the phone. If the opening turns out deeper or the wall needs patching, that is discussed and written into the order before any work begins, not raised afterwards. A price agreed before the wall is opened is a guess; fixing it after measuring is what keeps the final bill from moving.
An inner reveal deals with warmth and appearance, an outer one with rain and drainage. The joint where each meets the sill decides whether the opening stays dry.
An inside reveal is about insulation and finish, while an outside reveal sheds rain and ties into the sill and drip edge. The inner face carries the insulation layer, the vapour barrier and the decorative panel you see from the room, and its lower edge is sealed against the board to stop draughts and damp creeping in. The outer face slopes away, overlaps the sill and ends in a drip edge so water leaves the wall instead of running back to the frame. Water that gets behind an outside reveal finds the insulation first, so that outer joint has to drain, not just seal — a bead of foam alone traps moisture against the wall.
When a reveal can be saved and when it has to come off, how long each route takes, and what the guarantee actually covers — short and practical.
A reveal that has pulled away from the frame or cracked through is usually replaced, while a surface that is only marked can be repaired. Once the seal between plaster and frame opens, water and cold air get behind the finish and the joint will keep reopening. For a marked but sound surface we clean, fill and repaint; for a failed one we remove the old layer, refit the reveal and seal it to the profile. A plaster reveal needs drying time before paint, so a repair on a plaster finish stretches over more than one visit. Plastic sections are fitted in a single pass. On our work in Shymkent, reveal repairs are quoted after the measurer has seen the joint, because the depth of the failure decides the method.
Our installation work carries a 5-year warranty on fitting and a 1-year warranty on repair, labour and replaced parts, and we check the finished reveal with you. The check is simple: run a hand along the joint for draughts, look for a straight line against the frame, and confirm the seal is continuous at the corners. Wiping a plastic reveal and repainting plaster on schedule costs far less than reopening a joint that was left to fail. Keep the reveal dry in the first days after plastering, and avoid abrasive cleaners on painted sections. Our own fitters do both the fitting and the repair, so the same crew answers for the result.
A finished reveal is judged by how it handles heat, moisture and the edge over the seasons, not by how it looks on the day of fitting.
Materials, installation, protection against freezing and condensation
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionSandwich panels and PVC are not afraid of moisture, do not crack and last longer than plaster, which has to be renewed over time. Plastered reveals require careful handling in everyday life and periodic painting.
For an apartment, sandwich panels or PVC are more often chosen: they do not require painting, are easy to wash and are not afraid of moisture. Plaster is suitable if you need a smooth monolithic look for painting, but it dries longer.
Complete drying of the plaster layer usually takes several days, and during this time it is better not to load or wash the reveals. The exact time depends on the layer thickness, temperature and humidity in the room.
First, it is worth checking whether there is a draft from under the windowsill and along the seams: freezing is often associated with insufficient insulation or loss of sealing. If the insulation is weak, the reveal is opened, insulation is added and the seams are re-sealed.
The main thing is to insulate the reveal and carefully seal the inner and outer seams so that warm air does not meet a cold surface. Then moisture does not settle on the reveal, and mold does not appear.
Theoretically it is possible, but without experience it is easy to make a mistake with measurement, fastening and sealing of seams, and then the reveal will start to draft. A specialist will select the material for your window and perform installation with a warranty on the work.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp