Adjustment
We fix misalignment and seasonal pressure, so the sash stops catching on the frame. See the price list for cost per sash.


Adjustment
We fix misalignment and seasonal pressure, so the sash stops catching on the frame. See the price list for cost per sash.

Hardware
We restore mechanism operation or replace the set on the sash. See the price list for cost per job.

Handle
We match the handle to the hardware model and replace it without damaging the profile. See the price list for cost per unit.

Seal
We replace the seal in windows of any manufacturer and restore pressure around the perimeter. See the price list for cost.

Double glazing
We replace cracked double glazing; if urgent, we make it within one day. See the price list for cost per job.

5,097 reviews on review sites
Plastic window repair is the restoration of sash operation, hardware, and sealing without replacing the window itself.
Plastic window repair covers moving parts: hardware, handles, locking cams, scissors, hinges, and seal. The technician adjusts pressure, replaces worn parts, and restores sash movement. If the double glazing is cracked, it is replaced separately.
How repair differs from window replacement and when restoration is cheaper: repair affects individual components — hardware, seal, double glazing — whereas window replacement means dismantling and installing a new structure. Restoration is usually more cost-effective when the profile and frame geometry are intact and the fault is local. Warranty on window repair is 1 year for work and replaced components. In Almaty, visit and inspection are free — this is a reference for the service format.

warranty on work and replaced components
visit and inspection in Almaty
technician arrives with tools and parts
For each fault, the technician chooses the right repair method: from adjustment to part replacement.

The technician cleans and lubricates the mechanism and checks how the sash moves. If wear is severe, the hardware is restored or replaced.
Adjusting the hinges brings the sash back into the correct position. If the hinges are worn, they are replaced.
The technician adjusts the compression and replaces the seal. After that, the sash closes tightly along the whole perimeter.
Lubricate the moving parts of the hardware and do not close the window with the sash in the wrong position. At the first signs of the mechanism disengaging, call a technician to restore engagement.
Components are selected to match the hardware model and window profile; below are the main items with price per unit.
Matched to the hardware model

Replaced when broken or worn; suitable for PVC and aluminium windows.
Locking element

Worn cams stop holding the compression; they are replaced together with the striker plate.
Opening mechanism

If the scissors break, the sash does not stay fixed; the part is replaced with a compatible one.
KBE, Rehau, VEKA, Provedal

We replace the seal in windows of any manufacturer and restore compression around the perimeter.
Urgent production

If cracked, the double glazing is replaced; urgent production is possible at a surcharge.
The cost depends on the type of work and the number of parts; the technician gives the exact amount after inspection.
| Type of work | Price |
|---|---|
| Simple sash adjustmentfor misalignment and seasonal pressure | from 3 000₸ per sash |
| Complex adjustment with sash removalrequires removing and reinstalling the sash | from 4 000₸ per sash |
| Balcony door adjustmentfor PVC doors | from 6 000₸ per unit |
| Hardware repairrestoring mechanism operation | from 7 800₸ per job |
| Hardware replacement on sashfull set replacement | from 10 000₸ per sash |
| Scissor or corner switch replacementfor mechanism failure | from 5 500₸ per unit |
| Cam or strike plate replacementfor worn locking elements | from 1 300₸ per unit |
| Hinge replacementfor sagging sash | from 4 750₸ per unit |
| Window handle replacementmatched to hardware model | from 2 750₸ per unit |
| Conversion to tilt-and-turn openingfrom a casement window | from 19 000₸ per sash |
| Conversion of fixed window to openingwith sash fabrication | from 28 000₸ per sash |
| Micro-lift or extra pressure installationfor smooth closing | from 1 700₸ per unit |
| Balcony latch installationon PVC door | from 3 750₸ per unit |
| Unlocking a jammed sashwithout damaging hardware | from 2 400₸ per sash |
| Hardware cleaning and lubricationprevention of sticking | from 1 250₸ per sash |
The price is fixed in the order after measuring.What makes up the total: labour versus the cost of partsPayment after installation: cash, card or Kaspi.
Book a repairCompany facts that matter when choosing a window repair technician.
for work and replaced components
we accept requests daily
we respond to requests within this time
the cost does not change after measuring
in the translucent structures market
cash, card or Kaspi
the technician will come at a convenient time
of Kazakhstan, including Pavlodar
Four steps from request to checking the work.

Describe the problem on WhatsApp or by phone. We will clarify the window model and arrange a visit time.

The technician arrives, inspects the sash and hardware, and gives the exact cost of work.

The technician performs adjustment or replacement of parts on site, using tools and components.

You check the sash movement and compression. The technician gives recommendations on hardware care.
Good to know
Centre Okon handles PVC window repair in Pavlodar with its own fitters, not through middlemen. We diagnose the fault on site, then adjust the sash, swap the seal or fit a new glass unit, with urgent glass replacement done within one day. Repair work and replaced parts carry a one-year warranty, and you pay after the job is finished.
Almost every complaint about a window comes down to three nodes: how the leaf presses against the frame, how the hinges carry it, and the glass itself. Before changing anything, a fitter works out which one has failed.
When cold air comes from under a closed sash, we check the gasket first, because a compressed or hardened strip loses its grip long before the profile itself fails. The rubber runs the whole perimeter of the leaf and does the sealing work — it is squeezed flat on every close, and after years of that cycle it hardens and cracks at the corners. The profile underneath is usually still straight and sound. Tightening the hinges on their own pulls the leaf closer, but it cannot bring a dead gasket back to life. Run a hand along the rubber on a frosty morning — a stiff, flattened strip that no longer rebounds is the giveaway.
| Symptom | Likely cause | What we do |
|---|---|---|
| Cold air under the leaf | Hardened or flattened seal | Replace the gasket |
| Leaf scrapes or won't latch | Worn hinges, shifted sash | Re-hang and adjust |
| Fog inside the glass | Failed double-glazed unit | Fit a new one |
| Handle turns but leaf stays loose | Worn hardware | Repair or replace fittings |
Replacing a window always costs more and takes longer than repairing one, so the useful question is not which option sounds better but what will actually fix the window in front of you.
If the profile is sound and only the seal, hardware or glass unit gave up, a repair restores the window without touching the structure. We check three things before quoting: whether the sash still sits square, whether the profile runs straight along its length, and whether the glass unit misted between the panes. A tired seal shows as a draught or condensation on the inner edge; worn hardware shows as a handle that needs lifting or a sash that scrapes. A window that is still square and solid is often the best repair candidate — the structure outlives several sets of seals and fittings, so tearing it out throws away sound material.
A warped frame, a seam that lets water through, or rot around the fixing points means the structure itself gave up and patching it will not hold. Warping shows as a sash binding at one corner and gapping at the opposite one, and no amount of adjustment cures a bent profile. A failed joint between frame and wall lets water track inward during driving rain, and re-sealing from outside rarely lasts once the fixing pulled loose. That moisture usually turns up as damp plaster or mould on the reveal before anything becomes visible at the window, so check the wall as well as the opening. When two or three of these signs appear together on the same opening, replacement is the honest answer rather than a repeat repair.
A window repair is a set of separate jobs, and each one is solved by its own part. Below is what the service covers and which sign points to which component.
We treat the seal, the hardware and the adjustment as three separate jobs, so you only pay for the one your window needs. A worn seal shows as a draught or a cold strip along the sash edge, and swapping the rubber is a short, self-contained task. Stiff handles, a loose latch or a sash that scrapes the frame point to the hardware instead, and sometimes a worn part is replaced while the rest of the fitting stays untouched. Adjustment is seasonal — a sash set tight for winter can bind in summer heat, so the same window may need a light re-set rather than a part swap. For pvc window repair in Pavlodar, the fitter confirms which part is worn before any work starts. Ask the fitter to show you the worn seal before it goes in the bin.
| Job | What it fixes | How we check it |
|---|---|---|
| Seal replacement | Draughts, cold spots | Hand test around the sash |
| Sash adjustment | Scraping, poor latch | Open and close cycle |
| Glass unit swap | Fogging, cracked pane | Visual and seal check |
| Hardware repair | Stiff or loose handle | Handle and latch test |
Timing and warranty are the two things people most often still have questions about after a first call to a service. Here is how long the work takes and what exactly the warranty covers.
Most repairs are finished in a single visit, and we give a one-year warranty on the repair work and on any parts we replace, with a three-year warranty on glass unit replacement. Seal replacement, hardware adjustment and sash re-hanging are all done on site, so the fitter does not need to take the window away. A glass unit swap may need a return visit if the size has to be made to order, though urgent glass replacement is done within one day at a surcharge to the glass unit price. Keep the order sheet — the warranty runs from the parts named in it, so a later fault on a different component is a separate job rather than a claim.
You pay after the work is done, by cash, card or Kaspi, and the price is fixed in the order once the fitter has measured the window. The fitter comes at a time that suits you, takes the sizes and confirms which part needs replacing, so the scope of the job is clear before anyone commits. Nothing is charged before the job starts. A price agreed before the window is seen tends to grow once the real fault appears, so a fixed order price protects you from mid-job surprises — and if the fault turns out to be smaller than expected, the order is revised down before any work begins. Ask for the fixed price in writing in the order so the agreed sum stays the same.
Owners often hold back, assuming a crew only touches one profile brand or standard flats. Both worries are covered here: seals and hardware across common profile systems, and glazing in places that are not a living room.
We change seals and repair fittings on units from any maker, including KBE, Rehau, VEKA and Provedal profiles. A gasket is matched to the groove geometry of the specific system, and a tilt-and-turn mechanism is matched to the leaf weight and the euro-groove position, so a Rehau leaf and a VEKA leaf rarely take the same replacement part. Provedal aluminium sliding systems use their own brush seals and roller carriages, which is a different job from a plastic casement. The profile brand decides which gasket and hardware fit, so tell the fitter the maker if you know it — it saves a return trip with the wrong part.
We repair glazing on loggias, in gazebos and on verandas, as well as small opening lights and transoms, not only standard flat units. A glazed loggia takes the same plastic leaves as a room, but the frame sits on a parapet and often faces stronger wind load, which shows up first as a draught along the hinge side. Gazebo and veranda glazing is frequently aluminium or a mixed frame, and a small opening light has too little depth for a standard handle set, so the fitter brings compact hardware. A window in an unheated gazebo or veranda works under different conditions from a flat, so the seal and adjustment are chosen for that exposure rather than copied from an indoor job.
A window rarely fails all at once, so the useful skill is knowing which part gave way and what fixing it actually involves.
Seals, Window selection, Hardware, Frosting
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionThe old seal is removed from the groove, the groove is cleaned, and a new seal is inserted around the entire perimeter of the sash. The technician selects a seal that matches your window profile, so the replacement takes little time and restores the seal immediately.
A quality window closes smoothly without distortion, and the seal fits evenly around the entire perimeter. On a bad window, the sash catches on the frame, the hardware moves stiffly or with play, and draughts appear in the very first season.
Most often this indicates a hardware failure: the scissors have disengaged, a cam has broken, or the blocker has spun. The handle turns idly, the sash does not press against the frame, so hardware repair is needed rather than a simple adjustment.
Properly working hardware moves smoothly, without crunching or jamming, and the handle turns with moderate effort and locks clearly. Squeaking, jerking, handle play, and loose sash pressure indicate that the mechanism needs checking.
Frosting along the edge usually indicates impaired sash pressure, worn seal, or a problem with the installation seam, rather than the double glazing itself. The technician checks the pressure and seal on site and decides whether adjustment is enough or parts need replacement.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp