A craftsman shows a white window blocker with a cable in the kitchen
from 1 200 ₸ per itemSurface-mounted sash turn stopper, installed on the window profileCalculate

Window Locks for Child Safety in Pavlodar

Sash · surface-mounted

Sash blocker

Sash turn stopper on a plastic window, installed surface-mounted. Price from 1 200 ₸ per item.

Closed white window in a dining room
GoogleYandex MapsZoon

5,097 reviews on review sites

What window locks for child safety are in Pavlodar

A small part on the sash or handle that prevents the window from being opened without your involvement

How it works

A blocker is a surface-mounted part that stops the sash from turning or locks the handle in the closed position. Inside the body there is a spring-loaded stopper released by a key, button or flag.

The body is attached to the window profile with two to four screws, the strike part to the sash or frame. The key or button is on the front side so an adult can open the window with one movement, while a child cannot.

Closed white window in a dining room
from 1 200 ₸

part price according to the page price list

1 year

warranty on window repair: work and components

5 minutes

reply in WhatsApp to your question

5 types
TurnHandleHiddenSlidingDoor

How a sash restrictor is mounted in Pavlodar

The design and fixings are selected for the window material and installation location so the part holds firmly and does not interfere with the sash

A hand turns the key in a white lock on the window sash
  • 01Plastic window

    A surface-mounted blocker is placed on the sash and frame, fixings are selected for the profile and floor: brackets, plungers or magnets.

  • 02Sliding aluminium

    A sash blocker is installed on aluminium sliding systems, it prevents the panel from sliding without a key.

  • 03Wooden window

    For wood, a wood-effect design is made, fixings are selected so as not to split the timber when drilling.

  • 04Balcony door

    A separate door blocker is installed on the door, it keeps the panel from swinging open and locks the handle.

  • 05Replacement of a broken one

    The old blocker is removed and a new one is installed without replacing the window, installation from 2 750 ₸ per unit.

Mesh types for child safety window blockers

Five designs for different tasks: from securing the sash to locking the handle in the ventilation position

Rotary

Sash · surface-mounted

A technician holds a small white plastic window blocker in his hand

A sash rotation stopper that prevents the window from being opened without a key or button.

from 1 200 ₸

Handle lock

Ventilation · with key

A craftsman holds a window handle with a lock and key — a child safety window lock

Locks the handle in the closed position while the sash remains open for ventilation.

from 2 800 ₸

Concealed

No visible part

A craftsman holds a small hidden metal window blocker in his hand

The part is hidden in the hardware, so the window looks normal from the outside.

from 2 800 ₸

Sliding

Aluminium · sliding

A technician holds a metal blocker for a sliding aluminium window

For aluminium sliding systems, blocks the sash from sliding.

from 4 000 ₸

Door

Balcony · door

A technician holds a white keyed blocker for a balcony door

Keeps the balcony door from swinging open, mounted on the leaf and frame.

from 2 750 ₸

Window locks for child safety prices in Pavlodar

Parts and installation according to the page price list, the final amount is confirmed in the order after measuring

Type of itemPrice
Sash blockersurface-mounted turn stopperfrom 1 200₸ per item
Handle turn blockerlocks the handle in the closed positionfrom 2 800₸ per item
Blocker for sliding windowsfor aluminium sliding systemsfrom 4 000₸ per item
Blocker installationmounting on the window profilefrom 2 750₸ per item
Child safety window locksurface-mounted, with a flagfrom 3 250₸ per item
Cable restrictor with locklimits the opening anglefrom 2 500₸ per item
Penkid lock with cablewith keyfrom 2 150₸ per item
Latch lock installationon a window or doorfrom 6 800₸ per item
Window burglary protectiona set of measures for the sashfrom 3 150₸ per job
Window handle with keylockablefrom 3 650₸ per item
Comb restrictor with installationholds the sash in the ventilation positionfrom 1 050₸ per item

The price is confirmed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or KaspiThe total depends on the part type, window material and number of sashes

Book a measuring visit

Why customers order window blockers from us in Pavlodar

Facts about the company that matter before ordering

Experiencesince 2012

we work across Kazakhstan

Warranty1 year

for window repair: work and replaced components

Measuring0 ₸

our own measurers and installers: they bring and install the part themselves, without intermediaries

Scheduleno days off

we work without days off

Pricefixed

orders can be placed in 17 cities of Kazakhstan, the Almaty office processes orders and provides consultations

Paymentafter

warranty for window repair — 1 year for work and replaced components

Response5 minutes

we reply on WhatsApp within 5 minutes

Coverage17 cities

you can order in 17 cities of Kazakhstan

How we make and install window locks for child safety in Pavlodar

Four steps from request to checking the work

  1. A hand holds a smartphone with a dark screen by a white window, measuring the sash
    015 minutes

    Request

    You write on WhatsApp or call, describe the window and the task, and get advice on the model.

  2. A tape measure measures the window opening of a white plastic window, a hand holds the tape
    02at a convenient time

    Measuring

    During measuring, they clarify the profile material, the sash opening side and the installation location so the fixings fit.

  3. Hands assemble a white blocker with a screwdriver on a workbench, tools around
    03by appointment

    Installation

    The technician mounts the blocker on the window profile and selects fixings for the window and floor.

  4. A hand locks the white blocker on the sash below the handle with a key, a short cable runs to an anchor on the frame
    04after installation

    Check

    You check the part together, and the technician explains how to use the key or button.

Good to know

Window Locks for Child Safety in Pavlodar

We supply and fit window locks for child safety in Pavlodar with a free measuring visit, so a sash can be held at a safe gap or locked until an adult opens it. Our own fitters match the fixing to your profile and floor, and you pay only after installation.

Choosing between a window lock, a restrictor, a key lock and a guard

Four classes of hardware solve one task in different ways, so first decide what your opening and your child actually need, then pick the mechanism that matches.

What each type of child safety lock actually does

Four hardware classes side by side by function and use case
TypeWhat it doesBest for
Window lock (blocker)Holds the sash at a set positionEveryday child safety
RestrictorFixes a vent gap widthRooms you air daily
Key lockOpens only with a keyFull adult control
Lockable handleReplaces the handleSimple retrofit

When a guard makes more sense than a lock

A guard is a physical barrier across the opening, while the blocker controls the sash itself, so the two solve overlapping but not identical problems. A guard mounts on the reveal or the frame and blocks the whole aperture, which matters on a wide casement or a low sill where a child can lean far out. The blocker works on the moving part: it caps how far the leaf travels, so the opening stays narrow enough that a small body cannot pass through. On a ground-floor room with a deep sill and a single sash, the blocker alone usually covers the risk. On a full-height balcony door or a loggia leaf with a wide panel, a guard adds a second layer, though it does not stop a child reaching the handle — the sash still needs its own limit.

Will window locks for child safety fit your window and your child

Picking a fitting starts with the frame, not a catalogue: the profile type, the condition of the moving leaf and how far your child can reach the handle decide which fixing and which mechanism will actually work.

Matching window locks for child safety to plastic, wooden and aluminium frames

We fit protection to plastic, wooden and aluminium units, plus transoms, loggia panes, gazebos and verandas, and the hardware is chosen per frame rather than one size for the whole flat. On plastic profiles the measurer usually picks Z-brackets or pins that clamp onto the leaf edge without cutting the profile; on slim aluminium sections magnets often hold better because there is little room for a bracket. A wooden unit from an older block may need a screw point in solid timber, away from a knot or a hollow section. One model can serve several openings, but the mounting kit rarely transfers unchanged from room to room, so measure each opening separately. If you are looking for window locks for child safety in Pavlodar, the measurer will check each opening on site and pick the right fixing for it.

What to do first when the sash has sagged

If the moving panel has dropped and catches the surround, we adjust the unit before fitting the hardware, because a blocker on a misaligned leaf will not hold the gap you set. A dropped leaf leans on the lower hinge, the handle corner rides up, and a restrictor mounted to that corner leaves an uneven opening that a determined child can work around. Our repair service realigns the moving part on its hinges, checks the corners and replaces worn parts, and only after that does the hardware go on straight. The same visit can renew the seal, which compresses over years and lets draughts through even when the sash is shut. A frame that rubs the surround also wears its gasket faster, so fixing the alignment first protects both the blocker and the unit itself.

How window locks for child safety hold a sash and still let you air the room

A good safety device does two jobs at once: it keeps a child away from an open vent and still lets an adult air the room without hunting for tools. Here is how that balance works day to day.

How far the sash opens and whether it holds a leaning child

The device sets a fixed gap so the leaf cannot swing wide, and the mechanism is built to hold a child leaning on the frame rather than give way. The stop sits on the moving part or the frame and limits travel to a set distance, usually enough for airflow but too narrow for a small body to pass through. A key lock adds a second layer: the catch stays engaged until someone turns the key. The gap matters as much as the hardware itself, because a child who can reach a hand or shoulder through a wide vent can still get stuck, so set the opening to a width a small body cannot pass.

Opening the window as an adult and keeping the lock smooth

  • Release the catch: press or turn it the way the fitter shows you at handover.
  • Keep the key handy: store it out of a child's reach but where a grown-up can grab it fast.
  • Wipe the moving part: clear dust from the body with a dry cloth when cleaning.
  • Check the gap: confirm the leaf still stops at the set width after a season of use.
  • Flag stiffness early: a mechanism that drags is easier to fix before it jams.

Measuring and fitting window locks for child safety in Pavlodar

Fitting starts with a free measuring visit at your home, where the measurer takes sizes, chooses the fixings and shows how the mechanism will work on your own sash before anything is ordered.

What the free measuring visit covers

The measurer comes at a time that suits you, takes the sizes, helps choose the design and fixings, and confirms whether the device sits on the frame or the moving part. Measuring and consultation cost nothing, and the price is fixed in the order only after the sizes are taken, so nothing changes later. The specialist also checks the profile depth and the gap between sash and frame, because a fitting that looks right on a photo can sit too tight or too loose on a real unit. Ask him to show the release motion on your own window during the visit, because the reach and angle differ between a low sill and a high one.

Fitting on balcony doors, loggia units and without drilling the profile

We fit protection on balcony doors and loggia sashes as well as standard ones, and where the profile allows we use a fixing that avoids drilling through it. The fastening is picked to match the profile and the floor: Z-brackets, plungers or magnets, so a high flat and a ground-floor room get different solutions. A balcony door takes more daily use than a standard sash, so the fixing there should be checked at handover for a firm hold under repeated opening. In our practice, a magnet fixing on a balcony door is the first part to loosen, so ask the fitter to test it twice before he leaves.

Warranty, payment and ordering window locks for child safety in Pavlodar

Ordering is straightforward: the measuring visit costs nothing, the price is fixed in the order once sizes are taken, and you pay only after the lock is installed.

What the warranty covers and how payment works

We fix the price in the order after measuring, and you pay after installation by cash, card or Kaspi, with a one-year warranty on repair covering labour and replaced parts. The same terms apply to every fitting we do on plastic, wooden and aluminium frames, including balcony doors and loggia units. Our crew works seven days a week, so the device can be fitted on a weekend without rearranging the family schedule. Because the price is locked in at measuring, any change to the scope is agreed before work starts rather than added at the end. Ask for the warranty terms in writing on the order sheet — that single habit is what makes a claim quick if a part ever needs replacing.

Reaching us and booking a visit

  • Message us: send a photo of the frame on WhatsApp for a first idea of the fixing, and we reply within five minutes.
  • Pick a day: we work seven days a week, so choose a measuring slot that suits your household and the room where the lock goes.
  • Confirm on site: the measurer checks the frame and agrees the fixing before ordering, which avoids a second trip if your frame needs a different bracket.
  • Approve the order: the price is fixed after measuring, before any work begins, and stays as agreed.
  • Pay after fitting: settle by cash, card or Kaspi once the lock is installed and you have tested it yourself.

What to check before installing a window safety lock

Child safety at the window comes down to a few decisions made in the right order: purpose, frame, sash condition, gap width and clear terms. The points below pull them together.

  • Pick by purpose: a blocker holds the sash, a restrictor sets a vent gap, a key-operated catch gives full adult control, a guard adds a barrier.
  • Check the frame first: plastic, wood and aluminium take different fixings, and each sash is measured on its own.
  • Fix a sagging panel before the lock: a misaligned unit will not hold the gap you set, so the hinge side is adjusted first.
  • Set the gap to the child: the opening width matters as much as the mechanism, and it is chosen for the smallest person in the room.
  • Confirm terms up front: free measuring, a price fixed after it, and payment once the work is done.

Questions about window locks for child safety in Pavlodar

Selection, supply, installation, servicing

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Which lock should I fit on a window if my 3-year-old can already open the sash?

For this age, a handle lock or a cable restrictor with a key will work: they prevent the handle from being turned and the sash from being opened wide. The technician will choose the exact model for your hardware during the free measuring visit.

02Should a lock be fitted on every sash or is one per window enough?

Every sash within a child's reach needs protection: if two open, two locks are fitted. An unprotected half of the window still allows access, so it is not worth saving on the second one.

03Can a lock be fitted if the sash is already tilted for ventilation?

No, installation is done only with the sash tightly closed, otherwise the hardware can easily be damaged and the fixing geometry disturbed. Close the window first, then the technician can fit the lock safely.

04What happens to the window after the lock is removed if it is no longer needed?

Only the fixing holes remain; they are covered with caps or a surface-mounted model can be chosen that leaves no marks. During the measuring visit, the technician will advise which option can be removed neatly without spoiling the profile's appearance.

05Who in Pavlodar fits window locks with measuring and installation, not just sells them?

We fit window locks: measuring and consultation are free, the technician will come at a convenient time and install the product on site. We give a 1-year warranty on the work.

06Does a lock get in the way of cleaning the window or removing the sash for the winter?

When closed, it does not interfere with cleaning the glass or caring for the hardware. To remove the sash, the lock is disengaged or dismantled — it depends on the model, and this should be clarified during the measuring visit.

Reviews of window locks for child safety in Pavlodar

5,0based on 97 reviews on platforms
All reviews