Craftsman tightening the handle of a wooden window
from 18 000 ₸ per m²Hardware replacement; master's visit and inspection — by arrangementCalculate

Wooden Window Repair in Aktau

Handles and espagnolettes

Hardware replacement

We replace handles and espagnolettes on wooden windows; price from 1 150 ₸ per unit, exact amount after inspection.

A craftsman holds a new metal window handle in his hand, shiny and sturdy
GoogleYandex MapsZoon

5,097 reviews on review sites

What wooden window repair includes

Frame, sash, glazing bead, glass and hardware — five components that the master checks and restores separately.

How it works

A wooden window consists of the frame, sashes, glazing beads, glass and hardware. Repair begins with an inspection of each component: the master checks the sash geometry, tightness of fit, condition of the wood and fastenings.

Restoration affects the frame, sashes, glazing beads, glass and hardware. In case of severe damage to the lower beam or frame misalignment, the master assesses which components can be repaired and which require replacement.

Honey-coloured wooden window with two sashes: frame, glass, hinges and a handle
from 1 150 ₸

hardware replacement per unit

from 8 100 ₸

painting per window with preparation

free measuring

consultation and measurer's visit

5 components
FrameSashGlazing beadGlassHardware

How sash restoration is performed in Aktau

The sash is held by hinges, the glass is fixed with a glazing bead, handles and espagnolettes ensure the seal — each component is repaired separately.

Technician applies varnish to a wooden window frame with a brush
  • 01Hinges and adjustment

    Sagging hinges cause sash misalignment. The master tightens the fastenings or replaces the hinges, then aligns the sash to the frame.

  • 02Glazing bead and glass

    The glazing bead holds the glass in the rebate. If it has fallen out or cracked, it is replaced; broken glass is replaced together with installation.

  • 03Handles and espagnolettes

    Hardware ensures a tight seal. Broken handles and espagnolettes are replaced with new ones, checking the locking action.

  • 04Sash adjustment

    The swollen sash is removed, the ends are planed and adjusted to the gaps so the window closes without effort.

Types of frame finishing and insulation

A wooden window can be refreshed by sanding and painting, replacing a section of wood, installing an inter-frame seal, or insulating using Swedish technology.

Sanding and painting

Surface restoration

A craftsman holds a can of white wood paint in his hand, fresh and smooth

We remove the old coating, sand and paint the frame with preparation. Price — from 8 100 ₸ per window.

from 8 100 ₸

Section replacement

Rotten sash bottom

A craftsman holds a small block of pine wood in his hand, even and light

We cut out the damaged wood and insert a new section, then fill and paint.

from 8 000 ₸/m²

Inter-frame seal

Around the sash perimeter

Hands insert a new seal into the groove of a wooden sash

We install a seal in the rebate to eliminate draughts between the sashes. Price — from 2 800 ₸ per window.

from 2 800 ₸

Swedish technology

Insulation along the contour

Technician holds a roll of soft, flexible grey rubber seal

We seal the junction of the frame to the opening along the contour. Price — from 4 200 ₸ per linear metre.

from 4 200 ₸

Window restoration

Sanding and painting

Wooden window after restoration with fresh varnish on the frames

Comprehensive refresh of the frame and sash surfaces. Price — upon inspection.

from 18 000 ₸/m²

Wooden window repair prices in Aktau

The price depends on the type of work, window area and condition of the wood; the exact amount is fixed after measuring.

Type of workPrice
Wooden window restorationsanding and paintingfrom 18 000₸ per m²
Wooden window paintingwith surface preparationfrom 8 100₸ per window
Wooden window frame repairbased on inspection resultsfrom 16 000₸ per job
Wooden window repair and insulationelimination of draughtsfrom 28 000₸ per window
Wooden balcony block repaircomplete blockfrom 53 500₸ per unit
Wooden window hardware replacementhandles, espagnolettesfrom 1 150₸ per unit
Insulation using Swedish technologyalong the junction contourfrom 4 200₸ per linear metre
Installation of inter-frame sealaround the sash perimeterfrom 2 800₸ per window
Broken glass replacementglass and installationfrom 8 000₸ per m²
Master's visit and inspection (without repair order)from 3 600₸ per job

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi

Check the cost of work

Why customers order frame restoration from us in Aktau

Repair warranty, free measuring and work without days off — facts that apply to every order.

Repair warranty1 year

for work and replaced components

Measuring and consultation0 ₸

we accept requests daily, including weekends

Work without days offevery day

we accept requests daily

Reply in WhatsApp5 minutes

we answer repair questions

Experience since 2012over 10 years

we make and repair window structures

Installation warranty5 years

for window installation work

Sealany

we replace in KBE, Rehau, VEKA, Provedal windows

Cities17

we accept orders in 17 cities of Kazakhstan

How wooden window repair is carried out in Aktau

Four steps from request to checking the window after work.

  1. Hand holding smartphone by wooden window, ceramic vase on windowsill nearby
    01on request

    Request and measuring

    We accept the request, clarify the address and complaints. The measurer arrives at a convenient time and takes dimensions.

  2. Tape measure stretched along wooden window sash during measurement before repair
    02on site

    Diagnostics

    The master inspects the frame, sash, hardware and glass, determines the cause of the fault and the scope of work.

  3. A workbench with tools, sandpaper, paint and sealant for window repair
    03after approval

    Work on site

    We carry out repairs on site: adjust hinges, replace hardware, glass or seal, eliminate draughts.

  4. Repaired wooden window with fresh white paint: one pane per sash, brass hinges
    04at the end

    Check and acceptance

    We check the sash movement and the tightness of the rebate.

Good to know

Wooden Window Repair in Aktau from Our Own Crew

Wooden window repair in Aktau is handled by our own crew, not a middleman. We come to your home, measure for free and fix sagging sashes, worn seals, cracked glass and draughts, then paint the frame if needed. Repair work and replaced parts carry a one-year warranty, and you pay only after the job is done.

Should You Repair an Old Wooden Window or Replace It

An old timber window is often sounder than it looks. The real question is not age but the condition of each part — frame, sash, hardware, glass. We assess by specific signs rather than by eye.

Signs your window can still be saved

  • Sound timber: tap the timber along the sill and jambs — a dull, solid knock without crumbling means it still holds screws and seals.
  • Square leaf: the sash sits evenly in the opening, gaps match on every side, and it opens without force.
  • Intact glazing beads: the putty or beads holding the glass are whole, so the pane does not rattle or let water past.
  • Worn seals only: the rubber or foam strip has flattened while the wood around it stays firm, so fresh seals restore the draught barrier.
  • Dry joints: hinges and handles move stiffly but the wood beneath them is not soft, so hardware can simply be swapped.
  • Straight frame: the corners are still true and the leaf does not catch on the jamb after adjustment — this is the strongest signal that repair makes sense.

When replacement is the honest answer

We tell you straight when a window is past saving, because patching rotten timber only buys one season. Soft sections around the hinges cannot hold a screw, so a new sash or a heavier glazed unit will sag within months. A window that has lost its geometry — corners out of square, the leaf catching on the jamb after every adjustment — will not keep a fresh seal tight, and the draught returns. Rot that runs deep into the sill or the lower corners is the same story: cutting it out and splicing new sections costs more than a new window and rarely holds. If the timber is firm and only the moving parts have failed, wooden window repair in Aktau is the sensible call. We check all of this during the free measuring visit and say plainly which way the money is better spent.

What a Wooden Window Repair Actually Covers

A wooden window repair is a set of jobs on individual parts, not one universal procedure. Below is what we do and how each job affects whether the window still lets in cold air and whether the sash closes properly.

Sashes, hardware and seals that stop the draught

Most draughts come from a sash that has dropped on its hinges and a seal that has flattened, and both are fixed on site. We re-hang the dropped leaf, set the hinge pressure so it pulls evenly against the casing, then replace the gasket. Seals are changed on windows from any manufacturer, including KBE, Rehau, VEKA and Provedal profiles, matched to the groove rather than trimmed to fit. A leaf off by a few millimetres opens a gap along the whole hinge side, which is why the draught feels strongest at the corner. Re-hanging the sash before touching the seal is the step that actually stops the draught — a new gasket on a misaligned leaf still leaves a gap at the hinge side.

Glass, glass units and repainting the frame

A cracked pane or a misted unit is replaced inside the existing wooden surround, so the window itself stays. We lift out the old glazing, check the rebate and the beads, fit the new pane or sealed unit and refit the beads so the timber keeps its shape. A fogged double-glazed panel means the seal between the panes failed, and no repair of the wood will clear it — the panel comes out and a new one goes in. Where paint has peeled to bare timber, we sand it back and repaint, since exposed wood takes on moisture and rots from the bottom corner up. Glass unit replacement carries a 3-year warranty.

Which repair jobs we take on

Jobs matched to the symptom you notice
What you noticeWhat we doWhat it fixes
Sash catches or dropsRe-hang and adjust the leafSticking and draught at the hinge
Draught along the edgeReplace the sealCold air and whistling
Cracked paneFit new glazing in the surroundBroken glass
Misted glass unitReplace the sealed panelFog between panes
Peeling paintSand and repaint the timberBare wood and rot risk

How the Measuring Visit and the Work Run

A repair starts with a visit and a measurement, not with a tool. Here is how the visit runs, what the measurer checks and when the window can be used again.

The free measuring visit and what the measurer checks

Measuring and consultation are free, and the measurer comes at a time that suits you to size up the window and choose the fixings. He looks at the timber, the sashes and the seals, then writes down the sizes and the parts that need replacing. The measurer checks the profile and the floor the window sits on, because a top-floor window needs different fixings from a ground-floor one — Z-brackets, pins or magnets are picked to match both. We also help you choose the mesh and the frame colour at the visit, so the order is complete before anyone leaves. Ask the measurer to show you where the draught comes from — that spot usually decides which repair job goes first.

Timing, working days and paying after the job

  • Seven days a week: we are open every day, so a visit can be booked for a weekday evening or a weekend morning.
  • WhatsApp replies: we answer messages within five minutes, and photos of the window help us plan the visit before we arrive.
  • Price fixed in the order: the figure agreed after measuring is written into the order and stays the same when the work is done.
  • Payment after installation: you settle by cash, card or Kaspi once the job is finished and you have checked the window.

Getting a Wooden Window Ready for Winter

In winter a wooden window gives itself away through draughts and condensation on the glass. We look at where the cold actually enters and what genuinely helps before the first frost.

Where the cold gets in and how we seal it

Cold air mostly enters through the seal line and the gap around a dropped sash, so sealing starts with the seal and the fit of the sash. On timber frames the seal flattens over time, and the sash sags on its hinges until the rebate no longer closes evenly. We replace the seal around the whole contour and adjust the sash so it presses against it the way it did when new. The materials are standard window seals that suit timber profiles, and the hardware adjustment is part of the same visit. Sealing a window that still has a misaligned sash traps the draught behind the new seal and pushes condensation onto the glass instead.

Insulation that lasts more than one season

  • Sound frame first: insulation holds when the frame and sash are solid, so loose joints and rotten corners are repaired before any seal goes in.
  • Fresh seal in the same job: the contour seal is replaced together with the repair, not patched over an old compressed strip.
  • Painted contact surfaces: a seal pressed against rough, unpainted timber wears through in a season, so we sand and repaint where the seal meets the wood.
  • Even closing pressure: the sash is adjusted so it presses along the full perimeter, which keeps the new seal from flattening in one spot.

Mosquito Screens and Window Protection for a Wooden Frame

Once a wooden window is repaired, owners often ask us to add a screen or extra protection. Here is how fixings work on a timber frame and how a screen fits around it.

Fixings that suit a timber frame and a high floor

We fit screens to timber, plastic and aluminium windows, and the measurer picks Z-brackets, pins or magnets to match the profile and the floor. A timber sash has its own depth and grain, so the fixing has to sit flat without biting into the wood or blocking the sash. Pins suit slim profiles, magnets work where drilling is unwanted, and Z-brackets carry heavier framed units. From our practice, the floor changes the decision as much as the window material does. On an upper level the fixing has to hold against wind load, so the bracket choice matters more than the mesh itself. Ask the measurer to check the sash thickness before the order is fixed, because a bracket chosen for a ground-floor window can loosen on a windy upper level.

Choosing a mesh and keeping the screen working

  • Ordinary fibreglass: a standard cloth resistant to ignition and temperature swings, the default pick for most windows.
  • Ultravue: lets in 25% more light and air than other meshes, useful on shaded or north-facing rooms.
  • Pet Screen: vinyl threads several times stronger than ordinary cloth, made for households with a cat or small dog.
  • Poll-Tex anti-pollen: a 0.25×1 mm cell that holds back fine pollen, a fit for allergy season.
  • Metal and Wing cloth: two extra options for doors and heavier use, chosen on site during measuring.

What to check before wooden window repair

A repair decision comes down to three checks — the timber, the fault and the parts — and the notes you bring to the visit decide how quickly the job is done.

  • Sound timber first: an old wooden window is worth repairing when its structure is solid and the fault sits in the moving leaf, seal or glass.
  • Name the symptom: draught, a leaf that sticks or a misted unit points to different parts — describe it when you book.
  • Check the seals and hardware: worn gaskets and loose hinges are replaced faster than a full rebuild of the moving part.
  • Note the floor and profile type: fixings for a high floor and a timber profile are chosen before the visit, not during it.
  • Photograph the problem: a close-up of the gap or the damaged part lets the crew bring the right seal or fitting on the first trip.

Questions about wooden window repair in Aktau

Restoration, insulation, hardware, troubleshooting

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01How can old wooden windows be restored?

First, a technician inspects the frame and sashes: if the wood is sound, restoration is possible. Then the surface is sanded, misalignments are fixed, the seal and hardware are replaced, and if needed, insulation and painting are done. The exact scope of work depends on the window's condition.

02Where in Aktau can I order wooden window repair?

Wooden window repair in Aktau is done by window companies, including us. Leave a request: a technician will come at a convenient time, inspect the frame and sashes, and tell you what can be restored.

03What should I use to seal wooden windows?

It's better not to seal gaps in wooden windows permanently but to fix the cause: replace the seal, adjust the sashes, or insulate. If a temporary solution is needed, special sealing tapes can be used, but it's better to have a technician do the repair.

04Why did the wooden window stop closing and why is there a draft from the gaps?

Usually the culprits are sagging hinges, a shrunken seal, and a loose sash: over time, the frame loses its geometry, and the sash becomes skewed. During the inspection, the technician finds the cause and adjusts the sash on site without replacing the window.

05Can an old wooden window be insulated without replacing the frame?

Yes, if the wood is sound: the seal is replaced along the perimeter, an inter-frame seal is installed, and the sashes are adjusted to prevent drafts. The set of works depends on the window, and the technician determines it on site.

06What is done with the hardware of a wooden window during repair?

Hinges are adjusted or replaced, and new handles and espagnolettes are installed if the old ones are worn out or broken. Locking mechanisms are also checked and adjusted so that the sash closes tightly and without skewing.

Reviews of wooden window repair in Aktau

5,0based on 97 reviews on platforms
All reviews