Craftsman by a new PVC window in the living room
from 42 500 ₸ per windowFree measuring visit, installation to GOST, 5-year workmanship warrantyCalculate

PVC Window Installation in Aktau

PVC window · single-leaf

Single-leaf window

With installation from 42 500 ₸ per window. Suitable for a kitchen, bathroom or small bedroom.

Technician holds a new white PVC window handle, showing the replacement
GoogleYandex MapsZoon

5,097 reviews on review sites

What PVC window installation in Aktau includes

Window replacement means removing the old frame and fitting a new PVC profile structure with double glazing and hardware.

How it works

A PVC window consists of a frame and sashes made of PVC profile, double glazing, hardware with handles and seals. During replacement the whole unit is changed, or individual elements if the frame stays.

Replacement includes removing the old window, preparing the opening, fitting the new frame, foaming and insulating the seam, and adjusting the sashes. Reveals, window sill and drip sill are fitted separately or together with the window.

New white PVC window in a bare wall opening, the joint at the wall filled with mounting foam
5 years

warranty on window installation under contract

Free

measuring visit and consultation before ordering

1 day

urgent double glazing production with a surcharge

Structures
Single-leafDouble-leafBalcony blockTurnkeyTo GOST

How a new PVC window is secured in the opening

The frame is fixed in the opening in one of three ways, and the seam around the perimeter is insulated inside and outside.

Close-up of the installation joint: cured foam between the white PVC frame and the concrete opening
  • 01On anchor plates

    Flexible plates are attached to the frame and wall, convenient for installation in an opening with uneven edges.

  • 02On anchors through the frame

    Drilling the frame and fixing with anchors into the wall, used with a level opening and thick walls.

  • 03Combined method

    A combination of plates and anchors when the opening is complex or the window is large.

  • 04Reinstallation to GOST

    If the seam freezes after someone else's installation, the window is removed and reinstalled with vapour and waterproofing.

Types of PVC window installation and double glazing units

The options differ in the number of sashes, construction type and package. The price is per unit or per square metre including installation.

Single-sash

PVC, tilt-and-turn

Technician holds a new white PVC window handle, showing the replacement

A compact window for the kitchen, bathroom or a small room. Including installation.

from 42 500 ₸ per window

Double-sash

PVC, two sashes

Hands holding a triple-glazed unit sample with a grey spacer frame: window noise insulation

The standard for a living room and bedroom, one sash is usually tilt-and-turn.

from 65 500 ₸ per window

Balcony unit

Window and door

Technician holding a white PVC profile for a bay window

A set for access to a loggia or balcony, including installation and adjustment.

from 95 500 ₸ per unit

Turnkey window

Including installation per m²

A craftsman holds a white plastic window reveal panel for finishing in his hand

Price per square metre of the construction including installation, convenient for calculating large openings.

from 60 000 ₸ per m²

Double glazing unit

Replacement without frame

Technician fitting a white metal drip sill under a window during installation

Replaced when the frame and hardware are intact but the glass fogs up or is broken.

from 5 200 ₸ per m²

PVC window installation prices in Aktau

Prices for work and constructions, the final cost is fixed after measuring.

Type of workPrice
Installation of a PVC windowstandard installationfrom 4 650₸ per m²
Window installation to GOSTwith vapour and waterproofingfrom 5 200₸ per m²
Dismantling of old windowwith disposalfrom 1 800₸ per m²
Single-leaf PVC windowwith installationfrom 42 500₸ per window
Double-leaf PVC windowwith installationfrom 65 500₸ per window
PVC window with installationturnkeyfrom 60 000₸ per m²
Balcony block with doorwith installationfrom 95 500₸ per unit
PVC window sill installationwith cuttingfrom 5 500₸ per linear m
Drip sill installationwith sealingfrom 3 250₸ per linear m
PVC reveals (sandwich panels)with installationfrom 4 700₸ per linear m
Reveals for a standard window, turnkeywith materialfrom 15 000₸ per window
Sealing of external jointswith materialfrom 2 000₸ per linear m

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi

Calculate by your dimensions

Why customers order window replacement in Aktau from us

Facts about timelines, warranty and working conditions that matter when choosing a contractor.

Installation warranty5 years

For window installation work under the contract.

Double glazing warranty3 years

For double glazing replacement.

MeasuringFree

We accept requests every day, in Aktau from 09:00 to 19:00.

Price fixingIn the order

Own production: we manufacture constructions without intermediaries.

PaymentAfter

Warranty for double glazing replacement is 3 years.

ScheduleNo days off

We work every day, in Aktau from 09:00 to 19:00.

Coverage17 cities

You can order in 17 cities of Kazakhstan.

OfficeAlmaty

We place orders and consult at the office on Seifullina, 404.

How PVC window installation is carried out in Aktau

Four steps from request to handover of the finished window.

  1. A hand holds a smartphone with a dark screen by a white PVC window in a bright room
    01First day

    Measuring

    The measurer arrives free of charge, takes the opening dimensions and helps choose the construction.

  2. A tape measure measures the opening of a white PVC window in a bright room with warm walls
    021–3 days

    Manufacturing

    They agree on the installation date and prepare the opening for the team's arrival.

  3. A worker's hands work with the lower profile of a white PVC window frame on the sill
    03Removal and installation

    Removal and installation

    The old window is removed with disposal, a new frame is installed, foamed and the seam is insulated.

  4. A finished white PVC window with a clean sill and reveals in a bright room
    04Acceptance

    Check

    The work is accepted according to the act and instructions for window care are provided.

Good to know

PVC Window Installation in Aktau from Our Own Crews with a 5-Year Warranty

We handle pvc window installation aktau with our own crews, not subcontractors. A free measuring visit comes first, then the measurer picks the profile, glass unit and fixings for your building and floor. We install, seal, fit slopes and adjust the hardware, back the work with a 5-year warranty, and you pay only after installation.

Repair or full replacement, deciding by the state of your window

Not every old window needs replacing. Before we quote anything, we look at the frame, the sashes, the glazing and the weatherstripping, and only then recommend a fix or a swap.

Signs that repair will still hold

We check four things before recommending anything — the frame, the sashes, the glazing and the weatherstripping — and if the structure is sound, repair usually wins. PVC window installation in Aktau starts with the same inspection, so we treat it as the deciding step rather than a formality. Straight profiles, corners that stay tight and panes without fog between them all point to repair: fresh hardware, adjusted hinges and a clean drainage channel. We replace worn gaskets on units from any manufacturer, KBE, Rehau, VEKA or Provedal included, and match the fittings to what is already there. A sash that drags or whistles is often a hardware and draught problem, not a reason to tear out a serviceable unit — ask for an inspection first, because a fix keeps the original profile and the wall joint intact.

When a new window is the honest answer

A cracked or warped frame, rot at the base, or a structure that no longer holds hardware means replacement, and we say so plainly instead of patching it. Panel blocks across the city were built decades apart, and older ones sometimes lose their geometry after years of wind load and temperature swings, so sashes stop closing flush no matter how the hinges are adjusted. Fitting a fresh sash into a failing base saves a day now but returns as draughts and condensation within a season. When the old unit has to go, we remove it completely rather than mounting an overlay on top — that hides the problem and traps moisture between the two layers. If the bottom is soft to the touch or the corners have opened, plan for a full replacement and a rebuilt wall joint.

How the installation runs step by step

Installation follows a fixed sequence rather than improvisation. Below is what happens from demolition of the old unit to the final adjustment, and how to check the result before the crew leaves.

From demolition to a sealed joint

  • Demolition: we take out the old unit and clear the opening of foam, screws and loose plaster before anything new goes in.
  • Opening preparation: the reveal is levelled and checked for square, so the new frame has a flat, true surface to sit against.
  • Frame setting: the frame goes in with packers and is fixed through the wall, not just foamed into place.
  • Foaming the joint: the gap between frame and wall is filled with foam along the whole perimeter, inside and out.
  • Sashes and glass: sashes are hung, glass units seated and beads clipped, then the hardware is adjusted.
  • Levelling the opening before the frame goes in is what keeps the sash square years later, so our crews never skip it to save time.

Foam, slopes and the first-day quality check

Slopes go on only after the foam has cured, and before we leave we check the sash swing, the seal line and the hardware on every opening. Foam needs several hours to set, so slopes are fitted the same day only on small openings; larger ones are finished on a return visit. On the first-day check the crew opens and closes each sash, runs a hand along the seal to feel for gaps and tests the handle and hinges. A window that closes with a light push and shows an even seal gap all round is set correctly; a tight corner means the frame is out of level, and that is corrected before handover, not left for later.

Measuring, sizing and fixings for your building and floor

Dimensions and hardware are settled at the measuring visit, never by eye. The house type and the storey decide what holds the frame in the opening, so both get checked before anything is ordered.

What the free measuring visit actually covers

The measurer comes at a time that suits you, takes the opening sizes, and helps you choose the profile, glass unit and fixings — measuring and consultation are free. He checks the reveal depth, the square of the opening and the condition of the mounting surface, then notes the wall material and the storey. Those details feed straight into the hardware choice: the same profile needs different parts in a panel wall than in brick. A tape measure at home misses the reveal depth and out-of-square walls, which are exactly what decide the frame dimensions. Ask the measurer to show you where the frame line will sit before the order is signed — that sketch prevents most size disputes later.

Fixings matched to the wall and the floor

three ways of holding a window in place
Fixing typeBest forWhat it does
AnchorsPanel and solid wallsBolt deep into the wall
Mounting platesBrick and blockSpread the load along the reveal
PinsLight frames, tight revealsHold without wide drilling

Choosing a profile and glass unit for the Aktau climate

Heat, wind-blown sand and a steady sea breeze set their own demands on a window, so the frame and the glazing need to be chosen together, not by habit or by what a neighbour installed.

Profile chambers and what they change

More chambers in a PVC profile mean more sealed air pockets, and those pockets are what slow thermal transfer and stiffen the sash against gusts. A three-chamber section copes with a calm inland facade, while five or six add rigidity that shows up on an exposed wall facing the sea. The steel insert inside the frame matters as much as the count: the deeper it sits, the less the sash flexes when a strong gust hits it. For a blustery coastal city, stiffness counts as much as insulation, so a sturdier section earns its keep on upper floors that take the full wind. Ask which liner goes into the frame before comparing counts — a six-chamber shell with a thin insert bends like a three-chamber one.

Glazing for sun, dust and wind

Glazing options compared by what they block and where they fit
Glass unitKeeps outSuits
Single chamberSome noise, light dustQuiet inner rooms
Two chambersSolar load, dust, street noiseMost living rooms
Two chambers, coatedStrong sun and glareSouth-facing and balconies

Warranty, payment and what keeps the guarantee valid

Terms are worth reading before you sign, not once something goes wrong. Below is what we cover, how the order is paid, and what quietly voids the guarantee.

What the 5-year workmanship warranty covers

We give a 5-year guarantee on window installation, a 3-year term on glass unit replacement and a 12-month term on window repair covering both labour and replaced parts. Installation cover applies to the joint, the levelling and the fixings our crews set — the parts of the job that depend on hands rather than on the profile supplier. Glass units carry their own 3-year span because a sealed chamber either holds its seal or fails early, and failures show up well inside that period. Repair work is covered for twelve months, including the parts we swap out. The guarantee covers our workmanship, so it stays valid as long as the window is not altered by someone else or damaged by the building settling. In our practice, most claims come from a window re-hung by a third party — keep the original paperwork and the claim stays simple.

How ordering and payment work

The price is fixed in the order once measuring is done, and you settle by cash, card or Kaspi when the job is finished — we reply on WhatsApp within 5 minutes and work seven days a week. Locking the price at that point means the quote you agree to is the one you pay, with no surprise add-ons at the end. The measurer takes the sizes, checks the opening and helps pick the profile, glass unit and fixings on the spot, so nothing is guessed from a photo. Order direct with the crew that installs, and the same people who measured answer questions later. On a busy week, sending opening photos on WhatsApp before the visit shortens the measuring call and lets us bring the right fixings for your floor.

What to consider before replacing your PVC window

A window job goes right or wrong on a handful of decisions, and most of them are taken long before the first screw goes in.

  • Repair or replace: judge the frame first — a straight, solid one rarely needs tearing out, while rot or a bowed profile does.
  • Sequence: demolition, levelled opening, fixed frame, cured foam, then slopes — skipping a step shows up as draughts within a season.
  • Fixings: Z-brackets, pins or magnets follow the wall material and the floor level, not the fitter's habit.
  • Glass before profile: heat, dust and wind load are settled by the glass unit; chamber count only supports that choice.
  • Warranty: read the terms prior to signing and keep the unit untouched by other trades, or the coverage lapses.

Questions about PVC window installation in Aktau

House types, double glazing, fitting, disposal

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01What should I consider when replacing a window in a panel building versus a private house?

In a panel building the opening is often more even, but the load-bearing panels must not be weakened, so fixings are chosen with extra care. In a private house it depends more on the wall material and the condition of the opening, and the surveyor will take these nuances into account.

02How does window replacement in an apartment work if I am home all day?

The fitters arrive at the agreed time, first cover the furniture and floor, then remove the old window and install the new one with sealed joints. The timing depends on the size and condition of the opening; the fitter will give a more precise estimate after the free measuring visit.

03Which double glazing should I choose when replacing windows if they face a windy side?

For a windy side, it is better to choose a multi-chamber double glazing with an energy-saving coating — it is quieter and warmer. The surveyor will help you choose the right option for your side and floor free of charge.

04Who is responsible for removing and disposing of the old frames and double glazing after replacement?

The removal team takes out and disposes of the old frames and double glazing themselves — this is included in the turnkey replacement. It is worth discussing disposal in advance during the measuring visit so that old windows are not left in the yard or on the landing.

05Do I need approval to replace a window in a panel building in Aktau?

If you are replacing a window in your own apartment with a structure of the same size and not touching the load-bearing wall, separate approval is usually not required. Enlarging the opening or changing the facade already requires permission — it is better to clarify this before ordering.

06Will an old wooden window be replaced with a plastic one if the opening is uneven?

Yes, an uneven opening is not a problem: the surveyor takes actual measurements and selects a frame taking wall differences into account. During fitting, the gaps are filled with expanding foam and reveals, so an old wooden window can be replaced with a plastic one without reworking the opening.

Reviews of PVC window installation in Aktau

5,0based on 97 reviews on platforms
All reviews