Welded grille
Straight rods, standard pattern. Price from 7 500 ₸ per m², installation from 4 500 ₸ per m².


Welded grille
Straight rods, standard pattern. Price from 7 500 ₸ per m², installation from 4 500 ₸ per m².

Forged grille
Bent elements instead of straight rods. Price from 26 000 ₸ per m², pattern discussed during measuring.

Decorative
Laser cutting of sheet with pattern. Price from 25 000 ₸ per m², color chosen to match facade.

Hinged leaf
Surcharge to base from 15 000 ₸ per leaf, lock insertion for 5 000 ₸.

Removable grille
Mounts on anchors and can be removed if needed. Price from 16 500 ₸ per m².

5,097 reviews on review sites
A frame with rods and mesh that covers the opening from outside and protects the window from intrusion
The base is a steel frame made of angle or profile, with rods welded inside at a certain mesh spacing. The finished frame is primed and painted, then fixed to the wall around the window opening.
The pattern and shape are chosen to match the facade: straight rods, bent forged elements, convex blown shape, or a laser-cut pattern from sheet.

price per m² of welded grille of standard pattern
installation of grille on opening, calculated separately from the product
powder coating in color of choice
The fixing method is chosen based on the wall material and whether access to the window from outside is needed

The frame is pulled to the wall around the opening with anchors and remains stationary. Access to the window from outside is permanently closed.
One or more leaves open on hinges, a lock is inserted into the leaf. Convenient for washing the window and going out to the balcony.
The frame is held on anchors that can be removed and the grille taken off entirely. Price from 16 500 ₸ per m².
Anchors are set into brick, concrete or aerated block depending on wall thickness: aerated block uses fixings with greater embedment depth, concrete uses standard, brick accounts for void ratio. Points are chosen so the anchor holds in the load-bearing layer, not in the finish.
Price list by product type and work, surcharges are added to the base
| Type of item | Price |
|---|---|
| Welded grille, standard patternbasic version | from 7 500₸ per m² |
| Forged grilleforged elements | from 26 000₸ per m² |
| Blown grilleconvex shape | from 26 500₸ per m² |
| Decorative grille, laser cutpattern from sheet | from 25 000₸ per m² |
| Sliding accordion grillefolding design | from 28 000₸ per m² |
| Hinged grille leafsurcharge to base | from 15 000₸ per leaf |
| Removable grille on anchorscan be removed if needed | from 16 500₸ per m² |
| Fire hatch in grilleemergency exit | from 15 000₸ per item |
| Lock insertion into grillelocking leaf | from 5 000₸ per item |
| Powder coating of grillecolor of choice | from 5 500₸ per m² |
| Grille installationmounting on opening | from 4 500₸ per m² |
| Grille repair, welding and straighteningrestoring geometry | from 6 000₸ per job |
| Removal of old grilletaking down before replacement | from 4 000₸ per item |
Price is fixed in the order after measuringMeasuring and consultation — freePayment after installation: cash, card or Kaspi
Book a measuring visitFacts about the company, production and installation without intermediaries
the price is fixed after measuring
the measurer will come at a convenient time and take dimensions
you can order in 17 cities of Kazakhstan
for work and replaced components
we install on plastic, wooden and aluminium windows
we work without days off, in Aktau — 09:00–19:00
we reply on WhatsApp within 5 minutes
we deliver and install on windows and doors
Four steps from request to finished grille on the opening

You leave a request, the measurer arrives at a convenient time, takes the dimensions of the opening and helps choose the design.

The frame is welded to the taken dimensions, the pattern and cell pitch are taken from the approved sketch.

The finished frame is powder-coated in the chosen color so the coating lasts outdoors.

Before welding, the customer approves the sketch and cell pitch in writing: the pattern, dimensions and position of leaves are fixed on paper so the finished frame matches expectations.
Good to know
We make metal window grilles in Aktau to your exact sizes, with free measuring, fixings chosen for your window profile and floor, and frames painted to match your windows. Our own fitters install them on plastic, wooden and aluminium windows, and you pay only after installation by cash, card or Kaspi.
The grille type follows the job: break-in protection, keeping the view, washing the glass, or covering a balcony and door. Here are the four main options and what each one suits.
| Grille type | Best for | What it lets you do |
|---|---|---|
| Fixed | First-floor windows, constant protection | Nothing moves, strongest barrier |
| Sliding | Balconies, wide openings | Slides aside for air and cleaning |
| Hinged | Windows you open daily | Swings open like a door |
| Clear | Windows where the view matters | Keeps light and outlook, still a barrier |
We fit grilles to windows, doors, balconies, loggias, gazebos and verandas, so a first-floor flat and a country veranda get the same measured approach. On a first-floor window the priority is a rigid fixed panel that no one can lever out; on a balcony the opening is wider and a sliding leaf keeps the walkway clear. An entrance door needs a hinged frame that opens outward on its own hinges, not a panel bolted across the doorway. For loggias and gazebos we match the profile colour to the structure so the barrier reads as part of the building. On a balcony the grille has to clear the door swing and the rail height, so the measurer checks both before choosing a type rather than after.
Sand, heat and steady wind off the Caspian wear steel and its finish faster here than in a mild climate. Below is what actually resists that load — the section, the surface treatment and the colour.
The load-bearing part of a grille is made from steel bar or square section, and a powder coating is what keeps that steel from corroding and fading. Bar stock gives the stiffness a wide opening needs, while square section lets a fabricator weld tighter joints and a cleaner line around a narrow casement. The powder is baked on rather than brushed, so it forms a continuous skin over the steel and holds its shade under direct sun instead of chalking within a season. Bare or thinly protected steel near the sea air pits first at the welds, so the quality of the finish matters more than the bar thickness on a coastal facade. On a salt-exposed wall, ask for a two-coat system and check the weld seams — that is where rust starts first, long before the flat faces show anything.
We paint the grille frame any colour to match your windows, so the protection reads as part of the facade rather than a cage bolted on. The surround is finished in the same powder process as the bars, and the shade is matched to your profile rather than picked from a short list — white, anthracite, brown or a custom tone. A hue matched to the window profile hides dust streaks between washes far better than plain black, which shows every grain of local sand. In our practice, light and mid-tone shades stay presentable noticeably longer on the windward side of a building. If your windows already carry a warm wood-look laminate, a matching brown surround keeps the elevation calm instead of cutting it with dark lines.
The main worry we hear is that fitting will crack the frame or break the sealed unit. Here is how the measuring visit runs and how each fixing is matched to your window and storey.
Measuring and consultation are free, and the measurer comes at a time that suits you, takes the sizes and helps choose the design, mesh and fixings. He notes the profile type, the wall material and the storey, then checks where the grille will sit against the reveal and how the opening swings. For a balcony or entrance door he also records the direction of travel and the clearance to the neighbouring wall. The price is fixed in the order after measuring, so nothing shifts once the sizes are agreed. The measurer reads the window profile and the storey before picking a fixing, because the same barrier needs a different anchor on a third-floor plastic frame and a ground-floor concrete wall.
Upstairs a metal grille guards against break-in, yet it does nothing about a child at an open window. That task belongs to a restrictor or a window lock, and the pick depends on your floor and room.
A metal grille stops entry from outside, but it cannot stop a child from opening the casement, so upstairs it works with a restrictor or a lock rather than alone. On a ground-floor flat or behind a balcony the barrier carries most of the load: it closes off the opening as an entry point while the window stays free for air. Above the first level the balance shifts — the higher the flat, the less the break-in risk matters and the more the open window matters. A fixed barrier high up can also block a rescue route, so the safe pattern is intrusion protection plus a device that limits how far the leaf swings. Ask which of the two risks actually applies to your room before choosing hardware.
In our window-protection range we fit grilles, restrictors and window locks together, so one visit covers both the break-in risk and the child-safety risk. A restrictor set to a narrow gap still lets the room air out on a hot day, which is why families here often keep it engaged through the whole summer. The barrier is measured and fixed to the frame, the opening limiter and lock go onto the window hardware, and the fitter checks that each part works without fouling the others. Ordering the three as one set also means a single measuring visit and one installation slot instead of three separate callouts.
Most listings for metal window grilles aktau buyers see online come from adverts and resellers who never touch the window. Here is what a direct fitter with its own crew does differently, and how the job actually runs.
You can order grilles for a window and a door as a single set, and we reply on WhatsApp within 5 minutes and work seven days a week. Send a photo of the opening with rough dimensions and the measurer comes at a convenient time, takes exact measurements, and helps choose the bar, coating and fixings. We paint the frame any colour to match your windows, and the figure is fixed after measuring — you settle by cash, card or Kaspi once the grille is fitted. Booking the window and the door together means a single measuring visit and one fitting day, which saves a second wait after the grilles are made. In our practice, most delays come from splitting a set into separate jobs weeks apart.
Before you place an order, a few decisions shape how well the grille protects and how long it lasts on a coastal facade.
Installation, protection, design, care
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, with the right fixing the profile is not affected: anchors or brackets go into the wall or the end of the opening, not into the plastic itself. The fixing method is chosen based on wall thickness and base type so the window stays sealed.
For break-in protection, a thicker bar and wider spacing are used so a hand cannot reach between the bars and no tool can pass through. The exact values depend on the window and the pattern, and they are selected during the measuring visit for your specific task.
Yes, a hinged opening with a lock is needed as an escape route in a fire and for access to the window. The lock must open from the inside without a key so the opening can be swung open quickly in an emergency.
Yes, we powder-coat the grille in any color to match your windows: white, brown, gray and others. This way the facade looks neat, and the coating protects the metal from corrosion.
A metal grille is stronger and provides better break-in protection, while a transparent one blocks less of the view and light. For ground floors, metal is more often chosen; for upper floors, a transparent structure is often sufficient.
It is enough to periodically wipe the grille to remove salt and dust and inspect the coating for chips. If the paint is damaged somewhere, touch it up so the humid sea air does not start corrosion.
Yes, they are installed, but there the purpose is more often child safety and fall protection rather than break-in protection. For upper floors, a lighter pattern is chosen so as not to overload the facade or darken the window.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp