Cold
Sliding aluminium frames protect the balcony from sand, wind and rain. From 158 000 ₸ per balcony.


Cold
Sliding aluminium frames protect the balcony from sand, wind and rain. From 158 000 ₸ per balcony.

Warm
PVC profile with double glazing turns the balcony into part of the apartment. From 202 500 ₸ per balcony.

Panoramic
Floor-to-ceiling glass opens up the view and lets in plenty of light. From 322 500 ₸ per balcony.

Extended
Frames are extended outward along the windowsill, making more space inside. From 214 000 ₸ per balcony.

Canopy
Protects the glazed balcony from above against rain and sun. From 49 000 ₸ per balcony.

5,097 reviews on review sites
Frames, glass, drip sills and windowsills are selected for your balcony, not by template
Glazing encloses the balcony with frames around the perimeter: cold aluminium if you need protection from wind and sand, or warm PVC if the balcony will become part of the apartment. In Aktau with sea wind and dust, even cold glazing noticeably changes life on the balcony.
The surveyor will inspect the slab and parapet, recommend a profile and opening type. You can separately order extension, canopy, cladding, insulation, windowsill and mosquito screens.

glazing per square metre
measuring and consultation
price is fixed after measuring
The four most common reasons people come to us

Sand on the floor, things can't be left. Cold aluminium glazing will protect the balcony from dust and rain.
You want a study or children's area. We install PVC profile with double glazing and insulate inside.
Frames have dried out and let in draughts. We remove them and install new glazing.
Extended glazing adds space along the windowsill without touching the slab.
From lightweight aluminium frames to panoramic floor-to-ceiling glass
Aluminium · sliding

Protection from wind, dust and rain without insulation.
PVC · double glazing

Warm in winter, quiet, balcony as another room.
Floor-to-ceiling

Maximum light and view, ideal for new builds.
Wider on the windowsill

Adds space on a cramped balcony.
Calculated per m²

For non-standard openings and loggias.
Cost of work and materials; we'll give you the exact price for your balcony after the measuring visit
| Type of work | Price |
|---|---|
| Cold balcony glazing (aluminium)sliding aluminium frames | from 158 000₸ per balcony |
| Warm balcony glazing (PVC)PVC profile and double glazing | from 202 500₸ per balcony |
| Balcony glazing, per m²calculated by opening area | from 37 500₸ per m² |
| French (panoramic) glazingfloor-to-ceiling glass | from 322 500₸ per balcony |
| Balcony extensionextended along the windowsill | from 214 000₸ per balcony |
| Balcony roof or canopyfor upper floors | from 49 000₸ per balcony |
| Removal of old glazingframe removal and disposal | from 5 000₸ per balcony |
| Exterior balcony claddingcorrugated sheet or siding | from 73 000₸ per balcony |
| Interior balcony insulationfor warm glazing | from 6 800₸ per m² |
| PVC windowsill installationinside the balcony | from 5 500₸ per linear metre |
| Sliding mosquito screen for balcony and loggiafor new frames | from 17 400₸ per m² |
| Drip sill installationwater drainage from the frame | from 3 250₸ per linear metre |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after work: cash, card, Kaspi
Book a measuring visitNo empty promises, just how we work
we work across Kazakhstan
on WhatsApp, to the point
balcony inspection and profile selection
does not change after measuring
cash, card or Kaspi
no days off
we install mosquito screens right away
cities of Kazakhstan
Four steps from request to handover

Send a photo of your balcony on WhatsApp and tell us what you want: dust protection or a warm room. We'll reply and schedule a measuring visit.

The surveyor checks the slab and parapet, takes measurements, and helps choose the profile and opening type. The price goes into the order.

We remove the old frames, install the new ones, fit the drip sill and windowsill, foam and seal the joints.

We check how the sashes open and show you how to care for the frames. Payment after acceptance.
Good to know
We handle balcony and loggia glazing in Aktau as a direct contractor with our own installers, not through an aggregator. A free measuring visit comes at a time that suits you, the measurer picks the fixings for your window profile and floor, and the price is fixed in the order after measuring. You pay only after installation.
Heat, blown sand and steady wind decide more about glazing projects than any catalogue picture. Below we compare the warm and cold options and show how the frame affects tightness.
| Parameter | Warm glazing | Cold glazing |
|---|---|---|
| Frame | PVC, multi-chamber | Slim aluminium, sliding |
| Glass | Sealed glass unit | Single pane or thin unit |
| Insulation | Holds warmth, cuts noise | Light and ventilation only |
| Best use | Room to be joined | Seasonal balcony, storage |
We match the frame and hardware to local conditions, because sand and wind load the sash seal far more than in a mild climate. Fine dust works into the gap between leaf and frame, and a loose fit lets it settle on the inner sill within a season. Hardware with adjustable cams pulls the leaf tighter against the gasket, and a quality rubber seal keeps that line closed under wind pressure. On upper floors the load grows with exposure, so hinge and scissor choice matters as much as chamber width. A tighter fit and a quality gasket cut dust ingress and draughts, so the leaf stays easy to close even after a windy season.
This step is the first real stage of any job. Here is what happens on site, why the opening size and the fixing type decide how the frame behaves, and how the agreed figure is locked in.
Our specialist comes at a convenient time, takes the exact opening sizes and helps you choose the design, mesh and fixings, and the measuring costs nothing. He works around the frame rather than the glass alone: he checks the reveal depth, how square the opening sits, the sill line and the wall material at each anchor point. Fixings are then picked for your window profile and floor, using Z-brackets, pin plungers or magnets depending on what the profile and height allow. The bracket carries the load, so a wrong pick shows up months later as a sagging leaf, a draught along the top edge or a screen that rattles in the wind off the Caspian. On upper floors the wind load is higher, and the specialist adjusts anchor spacing rather than adding extra brackets at random.
We fix the price in the order right after the measuring, so the figure you agree on stays the same once the work is scheduled. The scope goes into the document on the spot: profile type, mesh grade, fixing set and the number of leaves, and that list is what you sign. Nothing is added later for brackets, colour matching of the frame or the trip itself, because those items already sit inside the agreed sum. If insulation, slope work or a sill replacement comes up during the measuring, it goes into the same paperwork before anything is signed. Agreeing that scope early keeps the final bill free of surprises and gives you a written record of what the crew will install. Payment follows installation, by cash, card or Kaspi, so the fixed figure is settled only after the work is done and checked.
This section walks through the fitting itself: what the team does beyond the frame, how long it takes, and how to accept the finished work so nothing important slips past you.
Our installers fit the profiles, sashes and glass unit, seal the joints, set the hardware and check that every sash closes and presses evenly. The job also covers the parts most people forget: foam and tape along the wall joint, exterior flashing over the head, sill and drip details that shed rain, and the trims that cover the gap between profile and opening. Hardware gets aligned so handles turn without force, and the seals sit fully in their grooves rather than pinched at the corners. On the loggia side, the team clears debris and checks that the drainage channels in the lower profile are open. This is how balcony and loggia glazing in Aktau is carried out from start to finish, with every joint and seal checked before handover.
Installation timing depends on the size of the opening, and you can stay in the flat while our team works, since the mess is kept to the opening. Small units with two or three panels move faster; larger loggias with a door and extra sections take longer, and the installers tell you the expected finish before starting. Glass units are handled and set one by one, so expect the noisiest part around the middle of the day. At handover, open and close every sash, check the press and look for gaps at the seal, because small fixes are quick now and costly later. Also confirm the drainage slots are clear and the handles latch without slack before you sign off.
Thermal prep and glazing are usually planned together on a balcony, yet the order of work decides how the finished space performs. Here is when the extra work earns its place and how the sequence runs.
Insulation and slopes are planned as part of the same job, so the glazing, thermal barrier and finishing line up in one sequence. In practice the crew strips the old sill, lays mineral wool on the floor and parapet, then closes the joints around the new frame and the slopes in a single pass. On an open loggia the parapet and ceiling slab are the coldest surfaces, so they take a wool layer with a vapour barrier ahead of the finishing panels. Doing this work while the frames are still out lets the crew seal the joints and slopes in one pass, which keeps cold bridges and draughts out of the finished space. Book it together with the frames, not afterwards — re-opening a finished slope to add a missing barrier costs far more than planning it up front.
Combining a balcony with a room needs warm glazing, thermal prep and often approval, so it is planned ahead of ordering the frames rather than afterwards. A warm frame with double-chamber glass units and a heated floor keeps the joined zone comfortable through the winter, while a cold single-chamber layout turns it into a glass box that pulls heat out of the room. The wall between the two spaces usually comes down only once the load-bearing status is confirmed and municipal rules allow it. A well-prepared loggia holds warmth and stays usable in winter, but ventilation has to be designed too, or condensation returns. Keep a trickle vent in the frame or a small wall valve near the radiator — sealed warm glazing with no air exchange fogs up by morning even when every step is done well.
Here we set out what the guarantee covers on fitting and glass units, when you pay, and how to look after hardware and seals once the work is finished.
| What is covered | Term | What it includes |
|---|---|---|
| Window installation | 5 years | Fitting and adjustment of the block |
| Glass unit replacement | 3 years | The new unit and its fitting |
| Window repair | 1 year | Labour and replaced parts |
| Payment | After fitting | Cash, card or Kaspi |
A balcony or loggia project comes down to five decisions — warmth, measurement, installation, insulation and long-term care. Here is what to keep in mind before signing the order.
Installation, insulation, double glazing, fittings
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, it can. When glazing on the railing, the load on the parapet is higher, so the technician will check its condition and reinforce it if necessary.
For the sunny side, double glazing with an energy-saving coating or tinting is suitable. It reflects some of the heat and keeps the space cool, but the final choice depends on the window and your needs.
If you plan to use the balcony all year round, insulation of the parapet and floor is essential. Without it, even warm glazing will not provide a comfortable temperature in winter.
First, the condition of the slab needs to be assessed: cracks and misalignments may require repair or reinforcement. During the free measuring visit, the technician will check the base and suggest a solution so the structure is installed reliably.
Yes, you can: installation is quick and does not create a lot of mess. The technicians work carefully and clean up afterwards, so you do not need to be present for long.
For a hot climate, it is better to choose reinforced fittings with a strength margin and adjustment. They are less prone to deformation, but the specific model depends on the profile and the weight of the sash.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp