Double-chamber
Three panes hold heat better when a strong wind blows from the sea in winter and dampen street noise. Price — from 20 000 ₸ per m².


Double-chamber
Three panes hold heat better when a strong wind blows from the sea in winter and dampen street noise. Price — from 20 000 ₸ per m².

Single-chamber
A lightweight unit of two panes for an unheated loggia where light and dust protection are needed. Price — from 12 600 ₸ per m².

Coated
Energy-saving glass reflects some of the sun's heat and keeps the room cooler in July. From 15 200 ₸ per m².

Door glass
Filling for a plastic door of the required thickness so the sash doesn't sag and closes tightly. From 22 000 ₸ per m².

Security film
Transparent film on glass holds shards on impact, which is safer for kids' rooms and ground floors. From 8 000 ₸ per m².

5,097 reviews on review sites
A new unit in the old frame restores transparency and warmth without dismantling, dust, or replacing the windowsill.
A unit is two or three panes joined along the edge with a spacer bar and sealant. When the sealant fails or the glass cracks, the sash doesn't need to be thrown away: the technician removes the glazing beads, takes out the old unit, and installs a new one of the same size.
The sea air in Aktau is humid and salty, and in winter a strong wind blows from the coast. That's why we often recommend a double-chamber unit for living rooms and coated glass for windows that get sun all day in summer.

single-chamber unit per square meter
warranty on work and new double glazing
measuring and help choosing a unit
These are the most common problems we hear about from Aktau, and each is solved by a new unit in the same sash.

A crack from impact or temperature change grows, and one day the glass may fall out, so it's not worth delaying.
Moist air got inside the unit through worn sealant, and the cloudy streaks can't be washed off anymore.
We urgently make a unit to size and install it within one day; a surcharge for urgency is added to the price.
We replace a single-chamber unit with a double-chamber one, and the cold from the glass in winter becomes noticeably weaker.
We choose by room and side of the house: in some places warmth matters more, in others quiet or protection from summer sun.
living room, bedroom, children's room

Three panes and two chambers for a living room facing the windy side.
unheated loggia

Two panes, lighter weight; a good fit where light matters more than warmth.
south-facing windows

Energy-saving glass lets in less heat in summer and keeps radiator warmth in during winter.
PVC balcony door

We choose the glass for the door sash by profile thickness so that it does not sag.
film on the glass

Removes glaring sun and hides the room from windows opposite, without changing the unit.
The amount is made up of the area, the number of chambers and the type of glass; the technician gives it after measuring.
| Type of work | Price |
|---|---|
| Single-chamber double glazing replacementfor loggia and utility room | from 12 600₸ per m² |
| Double-chamber double glazing replacementfor bedroom and living room | from 20 000₸ per m² |
| Double glazing replacement, per m²calculated by sash area | from 19 500₸ per m² |
| Double glazing with energy-saving glasswindows on the sunny side | from 15 200₸ per m² |
| Broken glass replacementsingle glass in the unit | from 8 000₸ per m² |
| Glass for plastic doorbalcony door | from 22 000₸ per m² |
| Window tinting with filmdims bright sunlight | from 5 500₸ per m² |
| Protective security film for glassholds shattered pieces | from 8 000₸ per m² |
| Additional glazing beadtight fit of the unit | from 1 300₸ per item |
| Sash adjustment with removalfor a heavier unit | from 4 000₸ per sash |
| Technician visit for inspection without repairif replacement is not needed | from 3 600₸ per job |
Price fixed in the order after measuringFree measuring and consultationPay after installation: cash, card, Kaspi
Order a measuring visitA short overview of our warranty and terms of work in Aktau.
the time it takes to make and install a unit for an urgent replacement
on the supplied unit and the technician's work
the unit is in the frame: cash, card or Kaspi
we come at a convenient time, take measurements and suggest an option
the price is entered in the order after measuring, no surprises
the usual wait for a reply on WhatsApp
you can leave a request on any day of the week
we work across Kazakhstan
Four steps from a message to a working window.

Send a photo of the window on WhatsApp and a few words: the glass is cracked, fogged on the inside or the window is broken.

We measure the glass from the glazing beads, look at the profile and decide together how many chambers and what glass you need.

The unit is made to your dimensions; for an urgent order it will be ready and installed within a day, with a surcharge.

The technician removes the glazing beads, replaces the unit, puts the beads back and checks how the sash closes.
Good to know
We handle double glazing replacement in Aktau as a direct contractor with our own fitters, not through an aggregator. We replace only the sealed unit inside your existing frame, keep the sash and profile, and back the work with a 3-year warranty on the glass unit. Measuring and consultation are free.
See fog, a crack or a draught and cannot tell whether a repair will fix it or the glazing has to go. Problems inside the sealed cavity mean new glazing; frame faults usually do not.
If the profile, hinges and seals are intact and the problem sits in the glazing, we swap just the glazing and leave the window in place. Our glass unit replacement carries a 3-year warranty, and the frame stays untouched, so the surrounding plaster, sill and fittings are not disturbed. A draught that comes from the hinge side or a handle that no longer closes usually means adjustment or a worn seal rather than glass — our window repair covers both labour and replaced parts for a year. Diagnosing the source first avoids paying for a panel you did not need, and a five-minute check of where the cold air enters tells you which of the two jobs you are actually facing.
Summers here are hot and bright, and the sea wind rarely drops, so the number of air gaps and the type of glazing matter more than most buyers expect. Below is how each option maps to real rooms.
| Unit type | Panes and gaps | Best for |
|---|---|---|
| Single-chamber | Two panes, one air gap | Shaded inner rooms, tight budgets |
| Double-chamber | Three panes, two gaps | Sun-facing facades, living rooms |
| Double-chamber with low-emissivity coating | Three panes, energy-saving layer | Sea-facing balconies, winter warmth |
For a glazed balcony or loggia we usually recommend a two-chamber build with an energy-saving coating, because the larger surface area loses and gains more heat than a standard window. That layer reflects part of the summer solar load back out and holds indoor warmth in winter, which matters on a loggia used as a room rather than a storage box. Wind load on an upper floor stresses the frame more than the panes, so the spec should be matched to how rigid the existing profile is rather than chosen on gap count alone. On our measuring visits we check profile stiffness and fixing points before confirming a spec, since a heavy panel on a soft frame rattles in gusts regardless of how many layers it has.
Replacement runs in four steps: a free measuring call, manufacturing, removal of the old glazing, then fitting and checking the new one. Here is what happens at each stage and how long it takes.
We begin with a free measuring call, take the exact sizes of the opening, then make the panel and fit it into the existing frame without touching the profile. The measurer arrives when it suits you and works to the geometry of your own window rather than a catalogue size. He also inspects the frame and the glazing beads, not just the glass, because a warped bead or a swollen seal has to be sorted before the fresh panel goes in. Measuring and consultation cost nothing, and the price is fixed in the order once sizes are taken, so nothing shifts afterwards. On the day, the old glazing comes out, the rebate is cleaned, and the new panel goes back on fresh seals and beads. If a bead is past saving, we flag it during that appointment so the fix is planned, not improvised on site.
Replacement is not limited to plastic frames. Timber, aluminium and openings of unusual size or shape each need their own approach, and the measuring step matters more than the profile name on the box.
We fit new glazing into plastic, wooden and aluminium windows, and also into transoms, loggia windows, gazebos and verandas. Timber frames move with the seasons more than plastic does, so glazing for an old wooden sash is sized with extra tolerance — otherwise the glass binds against the rebate in a hot spell and the sash stops closing. Aluminium profiles behave differently again: they conduct heat and cold straight to the edge, so the spacer and the edge seal carry the stress. On a glazed veranda or gazebo the pane also faces wind load from the open side, which the measurer checks before ordering. If your sashes are timber and the wood has already swollen or dried out, ask for the rebate depth to be checked first — a millimetre of movement is cheaper to plan for than a remake.
A non-standard size or shape is not a problem, but it does mean the glazing is made to the measured opening rather than pulled from a stock size. Arched, angled and trapezoid openings are measured point by point, and the shape is checked against the opening before anything goes into production. On a curved head the measurer takes several widths, because a single figure across the arc will not seat the pane evenly. The same applies to narrow balcony sashes and wide panoramic panels, where the frame may need a thicker profile to hold the weight. Expect a longer lead time on a shaped order than on a rectangular one, and ask for the drawing to be confirmed before the pane is cut — correcting a template costs far less than correcting a finished panel.
Warranty terms, payment and the question of who actually turns up are what buyers worry about most. Here is exactly how those conditions work when you order double glazing replacement in Aktau.
We give a 3-year warranty on glass unit replacement, and you pay after installation by cash, card or Kaspi. The cover applies to the sealed unit itself and to our fitting work: if the glazing fogs up inside, a seal fails or a bead works loose, the claim goes through us rather than a third party. Payment only happens once the panel is in the frame and you have checked it, so there is no deposit sitting with someone who has not delivered. The price is fixed in the order after measuring, so the figure you agree on the day of the visit is the figure you settle once the panel is in. Keep the order sheet — it carries the sizes and the warranty date, and it is the first thing we ask for on a claim.
We work as a direct contractor with our own fitters, so the person who measures is from the same team that installs, and we reply on WhatsApp within five minutes. Our line is open seven days a week, which matters when a pane cracks on a Friday evening and you need to know whether it can wait until morning. The measuring visit and the consultation are free, and the measurer takes sizes and helps choose the unit rather than handing the job to whoever is closest. With an aggregator the measuring visit and the fitting crew often come from different firms, and when something goes wrong each side points at the other instead of fixing the unit.
A short recap of what decides a successful replacement — from diagnosing the pane to the warranty you walk away with.
Replacement, sizes, energy efficiency, timelines
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, we make double glazing units to your sizes and replace the old one in the existing frame without buying a new window. A surveyor will take the measurements, or you can provide your own if you are sure they are accurate.
If the profile and sash are intact, it is enough to replace the double glazing unit itself; the frame does not need to be touched. The technician will remove the glazing bead, take out the damaged unit and install a new one, checking that it sits tightly.
If mist or condensation appears between the panes, the unit has lost its seal and should be replaced. If the glass is clear but draughts come through the gaps, the hardened seal is usually to blame, and replacing it is enough.
Yes, an energy-efficient double glazing unit can be fitted into an old frame if the profile and hardware are in working order. The surveyor will check the sash and advise which unit suits in terms of thickness and weight.
The unit is secured with glazing beads and setting blocks. With careful removal, the old glazing bead is taken off without damage, and an additional one is fitted if needed.
We carry out urgent replacement of a broken double glazing unit within one day; this service carries a surcharge on the price of the unit. Before the technician arrives, tape over the crack with film so that the shards do not fall out.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp