Craftsman holding a roll of new window seal in the living room
from 1 000 ₸ per linear mA new seal matched to your window profile, in one visit, payment after checking the sash.Calculate

Window Seal Replacement in Oskemen

PVC windows · Flat

EPDM seal

The tight contour closes the sash again, keeping out both cold and street haze. From 1 000 ₸ per linear m.

Technician holds a coil of black rubber window seal
GoogleYandex MapsZoon

5,097 reviews on review sites

What window seal replacement in Oskemen is

If the sash freezes up and the frame is wet, the problem is usually the rubber. It can be replaced without touching the window.

How it works

The rubber seal sits in the grooves of the frame and sash and compresses when the window is closed. While it stays soft, cold air and street soot do not get inside. Over time the rubber hardens and gaps appear in the contour.

The long winter, damp by the river and smog on frosty days in Oskemen quickly reveal a window's weak spots. A technician will fit a new seal matched to your profile and adjust the pressure so the sash closes tightly.

Hand fits a new black seal into the groove of a white sash
from 1 000 ₸

linear metre of new seal including labour

1 year

warranty on work and components

any

window brands: KBE, Rehau, VEKA, Provedal

Brands
KBERehauProvedalVEKAOther

How seal fitting on windows is performed

These are the problems we hear about most often.

A palm at the edge of a closed sash checks where the draft comes from
  • 01Sash freezes up

    Ice along the contour appears where warm room air escapes through loose rubber.

  • 02Wet frame

    Morning condensation means a cold draught through the old seal.

  • 03Soot on the windowsill

    Dark deposits with the window closed mean street air is coming through a gap in the contour.

  • 04Cold at the door

    The balcony door seal wears out faster than the rest and lets frost in first.

Types of window seals for Oskemen homes

The technician will advise: German seal for the bedroom and nursery, a durable door contour for the balcony, a brush for a summer house with aluminium.

EPDM

PVC windows in a flat

Technician holds a coil of black rubber window seal

Flexible rubber for most profiles, holds its shape in frost and heat.

from 1 000 ₸/linear m

German

bedroom, nursery

A craftsman holds a coil of grey rubber window seal in his hand

Stays soft longer through a damp winter and holds the pressure tighter.

from 1 200 ₸/linear m

Door

balcony, loggia

A craftsman holds a strip of brush window seal with bristles in his hand

Wear-resistant contour for a door opened many times a day.

from 5 000 ₸/item

Brush

summer house, sliding windows

A length of black self-adhesive window seal on a master's palm, white backing paper peeled back at the end

New pile closes the gap at the runners against snow and draughts.

from 1 150 ₸/linear m

Between frames

windows facing outside

A craftsman holds a thin strip of double-glazed window seal in his hand

A third layer of rubber reduces cold at the windowsill and outdoor grime.

from 2 800 ₸/window

Window seal replacement prices in Oskemen

The amount depends on the length of the contours and the type of rubber; the technician will give it after inspection.

Type of workPrice
EPDM sealsash or framefrom 1 000₸ per linear m
German rubber sealstays soft in frostfrom 1 200₸ per linear m
Window kitboth contoursfrom 3 500₸ per window
Balcony door sealfull perimeterfrom 5 000₸ per item
Aluminium window brushsliding framesfrom 1 150₸ per linear m
Cleaning and siliconefor soft rubberfrom 750₸ per linear m
Between-frame sealtighter and quieterfrom 2 800₸ per window
Sash draught-proofingsealing gapsfrom 3 500₸ per sash
Sash adjustmentwinter pressure settingfrom 3 000₸ per sash
Liquid plastic for jointsinternal seamsfrom 1 500₸ per linear m
Wooden window insulationSwedish methodfrom 4 200₸ per linear m

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi

Call a technician

Why customers order seal servicing from us in Oskemen

How we work with windows.

Warranty1 year

on work and new rubber

Profilesany

seal for KBE, Rehau, VEKA, Provedal windows

Pricein the order

the amount is fixed after inspection

Paymentafter

checking the window: cash, card, Kaspi

Response5 minutes

on WhatsApp to a request with a photo

Scheduleno days off

we come any day of the week

Hours09:00–19:00

time for accepting requests

Experiencesince 2012

we work across Kazakhstan

How window seal replacement is carried out in Oskemen

Four steps to a warm window.

  1. A hand holds a phone with a dark screen near the edge of a white window
    015 minutes

    Request

    Write on WhatsApp what is wrong with the window: freezing, damp, draught at the door. Attach a photo of the sash.

  2. A tape measure lies along the bottom edge of the window opening, close-up view
    02at a convenient time

    Inspection

    The technician checks the rubber, hinges and pressure, identifies the profile and gives the price before work.

  3. Hands holding a piece of new black window seal above a workbench with tools
    03one visit

    Replacement

    We remove the old rubber and grime from the grooves, install new seal in one piece around the perimeter.

  4. Finished white window in a bright room
    04in your presence

    Check

    We set the winter pressure, check the sash for draughts, then you pay for the work.

Good to know

Window Seal Replacement in Oskemen

We handle window seal replacement in Oskemen as a direct contractor with its own fitters. We swap worn weatherstripping on plastic, wooden and aluminium windows from any profile maker, including KBE, Rehau and VEKA. Measuring is free, the price is fixed after the visit, and every repair carries a 1-year warranty.

Reading the Signs That the Window Seal Replacement Has Given Up

A worn seal rarely announces itself. Most people blame a draft on a bad window, when the real culprit is a flattened rubber strip. Here is how to tell the difference in a couple of minutes.

A Five-Minute Check Before You Call Anyone

Run a finger along the seal and press a sheet of paper into the closed sash — if the paper slides out with no resistance, the gasket no longer grips. Do this at three points on each side, because wear is uneven and concentrates on the hinge side and the sill corner. A strip that still looks intact can be flattened to half its original thickness, so judge by how the sash closes, not by appearance alone. Look for a continuous dark line where the rubber meets the frame; a faint gap there means air passes freely. Window seal replacement in Oskemen starts with this same test, and the results decide whether a new gasket is the whole job. Judge by feel, not by eye — the paper trick catches wear that a visual check misses.

When the Problem Is the Seal and Not the Hardware

  • Draft along one edge: air enters where the rubber has flattened, not where the hinge sits.
  • Sticky or blackened surface: the material has absorbed dirt and lost its elasticity.
  • Condensation on inner glass: a cold bridge forms once the gasket stops meeting the frame.
  • Mould in the corners: damp air settles in the gap and feeds growth on the rubber.
  • Sagging or scraping leaf: the seal may be fine, but the hardware needs adjusting first.

Window Seal Replacement, Adjustment or New Glass Unit

Not every problem calls for new rubber, and not every one needs a new unit. We sort the work into three levels so you pay for the fix the symptom actually needs.

Three Levels of Repair and What Each One Fixes

Three repair levels by symptom and right moment
LevelWhat it fixesWhen it is the right call
Seal replacementDrafts, whistling, condensation on the seal lineRubber is cracked, flattened or blackened
Sash adjustmentSash scrapes, will not close flush, gaps at cornersHardware is loose or the sash has dropped
Glass unit replacementFogging between the panes, cold inner glassThe sealed unit itself has failed

When a New Seal Is Not Enough

If the inner pane is cold to the touch or fogged between the layers, the glass unit has failed and fresh rubber will not stop the heat loss. A worn seal and a misaligned sash often appear together, so we check the hardware before quoting a seal replacement on its own. When the unit itself is gone, we fit a new glass unit and, on request, complete window seal replacement in Oskemen within one day with a surcharge on the unit price, so the opening does not sit uncovered overnight. For draft complaints alone, a sash adjustment is often the cheaper first step and it tells us whether the perimeter really leaks.

Matching the Window Seal Replacement to Your Window and Profile

A seal is matched to the profile, the leaf type and the construction — never picked by eye. Below is how we choose the material, and why an oversized strip can be worse than a thin one.

Rubber or Silicone and Why Thickness Matters

Rubber seals suit most plastic units, silicone holds up better against heat and UV, and an oversized strip stops the leaf from closing flush. Rubber stays elastic in ordinary rooms and shrugs off dust, while silicone keeps its shape on south-facing units and loggia frames that bake in summer sun. Thickness is where most home attempts fail: an over-thick strip pushes the leaf out of alignment, the handle stops turning freely, and the locking points stop meeting the strikers. Too thin is quieter but just as wrong — draughts return within a season. We measure the strip against the profile groove with a sample before cutting, because a two-millimetre difference decides whether the sash closes with one hand or needs a shoulder. A seal fitted to the groove, not to the gap you can see, keeps the frame aligned for years.

Profiles and Window Types We Re-Seal

  • Any manufacturer: we replace seals in units from KBE, Rehau, VEKA, Provedal and other systems, on plastic, wooden and aluminium frames alike.
  • Plastic frames: the commonest case — standard T-groove seals in leaves, fixed lights and tilt-and-turn sections.
  • Wooden frames: older sashes take a softer rubber that follows slight warping instead of fighting it.
  • Aluminium and loggia frames: colder metal needs a denser seal and a different groove depth than plastic.
  • Balcony doors: threshold and hinge-side runs wear fastest and are renewed as separate strips.

One Sash or the Whole Unit

We replace the seal only where it has failed, so a single leaf or one side of a balcony door is a normal job, not a reason to redo the entire unit. A north-facing sash often outlives a sun-exposed one by years, and touching the healthy side only adds work without adding draught protection. On the measuring visit we run a hand along every groove and flag the sections that are already hardening, so you see the full picture before deciding. Replacing the full perimeter at once costs less per metre than calling us back for each leaf later, and it keeps the seal age uniform across the frame. If one corner has gone flat while the rest still springs back, that corner alone is what we cut out and renew.

How the Visit Runs from Measuring to Final Check

Replacing a window seal takes a single visit and does not require moving furniture out of the room. Here is what happens between your first message and the tightness check.

From Your First Message to the Fitted Seal

  • First reply: we answer on WhatsApp within five minutes, ask for photos of the opening, and agree a convenient time.
  • Free measuring: the measurer arrives with seal samples, takes exact sizes and helps pick the right profile and fixings.
  • Old seal removal: we pull the compressed rubber out of the groove, clean the channel and check the frame for gaps.
  • Fitting: the new seal is pressed around the full perimeter, with corners cut to a clean joint rather than stretched.
  • Leak test: we shut the unit and run a paper strip around the seal line to confirm there is no draught.
  • Handover: you get care instructions, and the price fixed in the order after measuring stays unchanged.

What We Check Before We Leave

Before leaving, we open and close every moving part, run the paper test along the new seal, and adjust the hardware if the sash no longer sits flush. The strip should resist a firm pull at every point of the perimeter, including the corners, where most draughts start. We then check the handle, the hinges and the locking points, because a unit that drops even two millimetres opens a gap along the top edge and makes a fresh seal look faulty. If the frame is out of square, we note it and correct the hardware while everything is still accessible. A seal that passes the paper test on day one will still settle over the first cold snap, so we leave the adjustment screws reachable for a follow-up tweak.

Service Life, Warranty and Caring for the New Seal

A fresh seal holds up for years when it is looked after, and we back the labour and the parts we replace with a warranty. Below is what that cover includes and how to stretch the life of the gasket.

How Long a Seal Lasts and How to Keep It Supple

A quality seal lasts several seasons, and wiping it with a lubricant twice annually keeps it from drying out and cracking through winter. Temperature swings between a heated room and a -30°C street, plus direct sun on south-facing sashes, harden the material faster than everyday use does. The moving contact line along the sash edge wears first, because it flexes every time the sash closes. A soft cloth with mild soapy water clears dust from the folds, then a thin protective film restores the surface. Harsh solvents and abrasive cleaners strip that layer off the rubber, so plain soapy water followed by a gentle wipe is the safer routine.

What the Warranty Covers and How to Book

Every repair carries a 1-year warranty on labour and replaced parts, you pay once the job is done by cash, card or Kaspi, and our team is available seven days a week. Booking starts with a message on WhatsApp, where we reply within five minutes, and the measurer arrives at a time that suits you. He takes the sizes, checks the profile and helps pick the gasket, so nothing is guessed on the day. The price is fixed in the order after measuring, so a strip that turns out to need a different profile does not change the agreed figure. We re-seal units from KBE, Rehau, VEKA and Provedal alike, and the same one-year cover applies to the job.

When window seal replacement is enough without a new window

A failed seal is the most common reason a window feels drafty, yet the cheapest to fix when caught early. Here is what to carry into your own inspection.

  • Test before you blame: slide a sheet of paper into the closed gap; if it pulls out freely, the seal is failing, not the frame.
  • Read the clues: a draft along one edge, blackened rubber and condensation between the panes point to the seal first.
  • Respect the groove: an oversized seal keeps the sash from closing flush, so thickness must match the profile channel.
  • Replace what failed, inspect everything: swap only the worn sections, but run a finger along the full perimeter during measuring.
  • Keep it supple: wipe the rubber with silicone twice a year, and the seal survives the cold season without cracking.

Questions about window seal replacement in Oskemen

Wear, seal choice, adjustment, condensation

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01What signs show the seal is worn even if it looks fine on the surface?

A seal that looks intact may have lost its elasticity: press it with your finger — if it doesn't spring back and stays dented, it's worn. Also check the seal with a sheet of paper along the sash contour.

02Which seal is best for windows so it doesn't crack within a couple of years?

For our winters, EPDM is a sensible choice: it stays elastic longer and doesn't crack from frost and sun. Silicone is also durable but more expensive, so the technician selects the option for your profile.

03Does the window need adjusting after replacing the seal?

Often yes: the new rubber is thicker than the old, and the sash may close more tightly. A minor adjustment of the hardware restores smooth operation and a tight seal, and the technician checks this on site.

04Will replacing the seals on plastic windows help with condensation and ice in winter?

If moisture and ice appear due to draughts along the contour, the new seal will fix that. When the cause is cold penetration through the double glazing or reveals, replacing the seal alone may not be enough.

05Is it possible to replace the seal on windows from different profile systems?

Yes, we replace seals on windows from various profile systems, including KBE, Rehau, VEKA and Provedal. The technician selects the seal for your profile, and we provide a one-year warranty on the work.

06Can the seal be replaced on just one sash if the other windows in the flat are fine?

Yes, you can replace the seal only where it's worn, leaving the other sashes untouched. The technician will inspect the contours and tell you where replacement is needed now and where the seal can still serve.

Reviews of window seal replacement in Oskemen

5,0based on 97 reviews on platforms
All reviews