Welded grille
Even rod pattern, basic version — from 7 500 ₸ per m², installation calculated separately


Welded grille
Even rod pattern, basic version — from 7 500 ₸ per m², installation calculated separately

Wrought-iron grille
Curved elements and three-dimensional pattern under house windows — from 26 000 ₸ per m²




5,097 reviews on review sites
A metal grille is a welded or wrought-iron frame with rods that covers the opening from outside and protects against intrusion.
The structure consists of a frame sized to the opening and rods joined by welding or forging. The pattern sets the rod spacing: an even grid for a welded grille, curved elements for a wrought-iron one. The finished frame is primed and powder-coated.
A wrought-iron grille is heavier than a welded one due to the three-dimensional elements, so the load on the wall is higher. Welded is simpler in pattern and cheaper in the basic version, wrought-iron gives a decorative facade look.

per m² of welded grille of standard pattern
per m² of wrought-iron grille with curved elements
per m² of on-site grille installation
The fixing is chosen based on wall material and purpose: fixed protection, access for ventilation, or emergency exit.

Fixed frame mounting with anchors into the wall around the opening; such a grille cannot be removed without tools
Part of the grille opens on hinges, a lock is inserted into the leaf — from 5 000 ₸ per item
The frame is held on anchors and can be removed if needed, convenient for window maintenance
Emergency exit in the grille — 15 000 ₸ per item, needed where the window remains an evacuation route
In aerated concrete, hollow brickwork or a thin partition, an anchor holds poorly, so the frame is mounted on embedded parts or a mounting frame that distributes the load over a larger wall area
The price list covers grille types, surcharges for leaves and a hatch, installation, painting and removal of an old structure.
| Type of item | Price |
|---|---|
| Welded grille, standard patternbasic version | from 7 500₸ per m² |
| Wrought-iron grillecurved elements | from 26 000₸ per m² |
| Cast (convex) grillethree-dimensional pattern | from 26 500₸ per m² |
| Decorative grille, laser cutpattern from sheet | from 25 000₸ per m² |
| Sliding accordion grillefolding design | from 28 000₸ per m² |
| Hinged grille leafsurcharge to base | from 15 000₸ per leaf |
| Removable grille on anchorsremovable if needed | from 16 500₸ per m² |
| Fire hatch in grilleemergency exit | from 15 000₸ per item |
| Lock insertion into grillefor hinged leaves | from 5 000₸ per item |
| Powder coating of grillecorrosion protection | from 5 500₸ per m² |
| Grille installationon-site installation | from 4 500₸ per m² |
| Grille repair, welding and straighteningrestoration of structure | from 6 000₸ per job |
| Removal of old grilleremoval before installation | from 4 000₸ per item |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi
Book a measuring visitEight facts about our work: production, measuring, painting, warranty and order terms.
the price is fixed after measuring
you can order in 17 cities of Kazakhstan
the measurer selects fixings for the window profile and floor (Z-brackets, plungers, magnets)
we reply within 5 minutes
for work and replaced components
we fit grilles to plastic, wooden and aluminium windows, vents, loggias and gazebos
we work every day, 09:00–22:00 in Almaty and Astana
payment after installation: cash, card or Kaspi
Four steps from request to a finished grille on the window

Message us on WhatsApp or call; we reply within 5 minutes and agree a convenient measuring time

The measurer takes the opening dimensions, helps choose the style, pattern and fixings; the price is fixed in the order

The frame is welded or forged to the pattern, primed and powder-coated; the time depends on the style and production workload

The installation team comes to the site, fixes the grille on anchors, checks the leaves and lock, and you accept the work
Good to know
We make metal window grilles in Oskemen to your exact size, with a free measuring visit, fixings chosen for your window profile and floor, and payment only after installation. Our own fitters handle measuring, making and fitting, so you deal with the contractor directly rather than a marketplace listing.
The right type depends on three things: the window itself, the storey it sits on and what you are guarding against. Below are the options and the jobs each one handles best.
| Type | Best for | Trade-off |
|---|---|---|
| Welded | Ground floor, courtyard side | Heavier bars, blocks some light |
| Forged | Street-facing facades | Decorative, not the strongest |
| Clear | Upper storeys, daylight rooms | Less break-in resistance |
| Combined | Two jobs at once | Higher cost, longer lead time |
We fit grilles on loggia and balcony openings, gazebo and veranda windows, doors and standard frames, and a fine mesh protects a cat or a small child. For pet safety the opening size matters more than bar thickness: through a wide gap an animal slips out, so the panel is chosen for the pet rather than for a standard figure. On hinged door screens we use Economy 32×10 mm or Prestige 42×17 mm profiles, and the measurer picks Z-brackets, pins or magnets for your window profile and storey. A framed screen comes off from inside in a minute, which helps when you take it down for winter.
Measuring and choosing the right fastener decide whether the unit sits level and whether the window frame stays intact. Here is how that process works when we handle it.
Measuring and consultation are free: the measurer comes at a convenient time, takes the sizes and helps you choose the design, the mesh and the fixings. During the visit he checks how the sash opens and where the fastening will sit, so the barrier does not block window cleaning or press against the slope. He also notes the surface material — plastic, wood or aluminium — and the level above the ground, because both change which bracket will hold. The visit covers more than a number: it confirms that the finished metal window grilles Oskemen homeowners order will clear the sill, the handle and any interior trim. Book it before you settle on a type — a quick check on site prevents a remake, since a unit cut to a guessed size rarely lines up with the opening.
A grille stays in service for years when it is checked and its fixings are tightened on time. Below we cover break-in protection, a safe way out, and the care that keeps the frame solid.
On a ground-floor flat, window grilles raise real resistance to a break-in — a burglar has to cut or lever steel, which takes time and noise. But a fixed panel with no opening turns the same bar work into a trap: if a fire starts, you have no exit through that window. The practical compromise is a hinged or removable section with a lock — it keeps an intruder outside yet opens from the inside in seconds when you need a way out. Ask for that opening leaf on any window you might use as an escape, and keep the key where an adult can reach it in the dark.
We repair grilles and replace the hardware that holds them, and we paint the frame any colour to match your windows so the piece does not stand out on the facade. A loose anchor is not a small thing: the wobble slowly wears the hole in the profile, so tightening or swapping the bracket should not wait for the next season. Wash the bars with a damp cloth and mild soap to stop rust at the joints, and touch up bare spots before winter so moisture cannot reach the steel. Press each bracket or pin by hand — any movement means the mount needs tightening or replacement. If a support has pulled out of the profile, we refit it with a fresh piece matched to the wall and window.
Metal guards are often ordered together with insect protection and finished in the colour of the window trim. Here is how both products share one opening without getting in each other's way.
Guards and a mosquito screen coexist on one window when the fixings and the outer surround are planned together, and we fit insect protection on windows and doors so that the two never block each other. The framed version sits on the inner side of the profile, the metalwork on the outer side, and the measurer checks the gap between them before choosing Z-brackets, plungers or magnets. A framed unit made to size takes 10–15 minutes to produce, a pleated one 40–60 minutes, so both parts of the order arrive together. The framed unit lifts out from inside in a minute, so we mount it where the bars leave the fasteners reachable — otherwise you cannot take it off for winter. Tell the measurer that metalwork is going on the same opening, and the layout is drawn around both.
We paint the grille surround any colour to match your windows, so the finish does not argue with the facade or the trim. Matching happens during the free measuring against a sample of your own window trim rather than from a photo, because white and graphite read differently in daylight than they do indoors. The same appointment settles the mesh and the fasteners, and the price is fixed in the order afterwards. On a wooden or aluminium opening the painter works from the profile sample too, not from a catalogue swatch. Bring a photo of the facade if the metalwork will be seen from the street — the light on that side changes how a dark grey or bronze finish reads next to the glass.
Buying from the workshop that also installs keeps one team responsible for measuring, production and mounting. Below we show what separates a direct fitter from a listing site, and what terms you get on lead times, warranty and payment.
We work as a direct fitter with our own installers, not as an aggregator or middleman, so one team handles the measuring, the manufacturing and the mounting of your window grilles in Oskemen. Our own crew measures the opening, chooses the Z-brackets, pins or magnets for your profile and floor, then mounts the finished grille themselves. A marketplace listing splits that chain: one workshop cuts the grille, a separate crew installs it, and a third party answers the complaint. When a fixing sits loose or a size is off by a few millimetres, a direct fitter has someone to answer for it. Ask any seller who will drill the holes in your frame — if the answer is vague, you are talking to a reseller, not the workshop.
| Term | What you get | When it applies |
|---|---|---|
| Price | Fixed in the order after measuring | Before production starts |
| Payment | Cash, card or Kaspi | After installation |
| Warranty | 1-year warranty on screens | From the handover date |
| Response | WhatsApp reply within 5 minutes | Seven days a week |
A barrier that suits the window, the floor and the purpose serves for years; one picked from a catalogue photo alone usually ends up re-drilled or taken down.
Installation, metal, fixings, care
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionWhether drilling is required depends on the window and is determined during the free measuring visit. The surveyor selects the method based on the profile and wall material to avoid compromising the window seal.
For outdoor use, choose a steel profile with powder coating or a galvanized base — they withstand frost, snow and temperature changes well. Avoid plain uncoated black steel: it corrodes faster.
Yes, grilles are made to your dimensions after measuring, including non-standard and arched openings. The surveyor will take exact measurements and suggest a pattern and fixings for your specific window.
On the first floor, security against break-ins is more important, so fixed grilles anchored into the wall are often used. On the ninth floor, a removable or hinged design is sufficient — it maintains safety and allows window cleaning; the surveyor will choose the exact option.
Yes, a hinged grille leaf opens on hinges and provides access to the window and mosquito screen. A lock can be fitted into the leaf on request to prevent outsiders from opening it from outside.
Simply wipe the grille free of dust and inspect the coating once a year, touching up any chips. Full repainting is done as the coating wears, usually every few years, to prevent rust.
Choose a hinged or removable design: the leaf opens and the panel can be removed from the fixings if needed. Then you can clean the window and fit the screen freely without dismantling the entire grille.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp