Craftsman on a glazed loggia by a window with roller blinds
from 37,500 ₸ per m²The frames will withstand snow and mountain wind, and we do not change the price in the order after measuringCalculate

Balcony and Loggia Glazing in Oskemen

Frosts · lived-in balcony

Warm

PVC profile with double glazing units for a balcony-room. From 202,500 ₸ per balcony.

Warm glazing of a loggia with white PVC frames, double glazing and insulated walls
GoogleYandex MapsZoon

5,097 reviews on review sites

What is balcony and loggia glazing in Oskemen

We make frames, joints and abutments with snow, frost and wind in mind

For winter

Winters in Oskemen (Ust-Kamenogorsk) are snowy and frosty, and a strong wind blows down from the mountains. For a balcony used as a room we fit a warm PVC profile with double glazing units and insulate the walls, floor and ceiling. For a storeroom, cold aluminum frames are enough.

On top floors we always offer a canopy so that snow and meltwater do not run down the frames. On the cramped loggias of panel buildings we make an extension.

Balcony glazing design: white PVC frame with a double-glazed unit and an opening sash
from 202,500 ₸

warm PVC glazing

from 6,800 ₸

insulation, per m²

free

measuring and selection

5 solutions
WarmColdOffsetCanopyInsulation

How winter balcony glazing is performed in Oskemen

Four reasons people write to us most often

Anchor plate fastens the balcony PVC frame to the concrete parapet
  • 01No frames at all

    Snow on the floor, things getting wet. Cold glazing will enclose the balcony.

  • 02Cold in winter

    A warm PVC profile and insulation make the balcony warm.

  • 03Wood has dried out

    Old frames do not hold heat. We replace the glazing.

  • 04Narrow loggia

    Extending the frames over the window sill adds space.

Types of balcony and loggia glazing options

Five solutions for different houses and floors

Warm

PVC · double glazing units

Warm glazing of a loggia with white PVC frames, double glazing and insulated walls

For a lived-in balcony in frost.

from 202,500 ₸

Cold

Aluminum

Technician holds a thin white aluminium frame profile, showing cold glazing

Protection from snow and wind.

from 158,000 ₸

Offset

Wider onto the window sill

Balcony glazing with the frame extended forward beyond the concrete parapet

More room on a narrow loggia.

from 214,000 ₸

Canopy

Top floor

Polycarbonate canopy above a glazed balcony on the top floor of a building

Against snow and meltwater.

from 49,000 ₸

Panoramic

Floor to ceiling

Panoramic balcony glazing from floor to ceiling balcony glazing

Plenty of light in a new building.

from 322,500 ₸

Balcony and loggia glazing prices in Oskemen

Prices per balcony and per meter; we give the total for your balcony at the measuring visit

Type of workPrice
Cold balcony glazing (aluminum)sliding aluminum framesfrom 158 000₸ per balcony
Warm balcony glazing (PVC)PVC profile and double glazing unitsfrom 202 500₸ per balcony
Balcony glazing, per m²priced by opening areafrom 37 500₸ per m²
French (panoramic) glazingfloor-to-ceiling glassfrom 322 500₸ per balcony
Balcony extensionextension over the window sillfrom 214 000₸ per balcony
Balcony roof or canopyfor upper floorsfrom 49 000₸ per balcony
Removal of old glazingremoval of frames and haulagefrom 5 000₸ per balcony
Exterior cladding of the balconycorrugated sheet or sidingfrom 73 000₸ per balcony
Balcony insulation from insidefor warm glazingfrom 6 800₸ per m²
PVC window sill installationinside the balconyfrom 5 500₸ per linear m
Sliding screen for a balcony and loggiafor new framesfrom 17 400₸ per m²
Sill flashing installationwater drainage from the framefrom 3 250₸ per linear m

The total is fixed in the order after measuringMeasuring and consultation are freePayment after work: cash, card, Kaspi

Book a measuring visit

Why customers order balcony glazing from us in Oskemen

How we work

Experiencesince 2012

we work across Kazakhstan

Response5 minutes

on WhatsApp

Measuringfree

we check the slab and railing

Pricefixed

after measuring

Paymentafter

acceptance of work

Schedule09:00–19:00

no days off

Screensfor frames

mosquito screens for new glazing

Cities17

cities of Kazakhstan

How balcony and loggia glazing is carried out in Oskemen

Work process

  1. A hand holds a smartphone with a dark screen by the balcony window opening
    015 minutes

    Request

    Send a photo of the balcony and tell us whether you need it warm or cold. We reply quickly.

  2. A tape measure measures the balcony window opening white PVC frame balcony glazing
    02free

    Measuring

    The measurer inspects the balcony, suggests a profile, extension or canopy, and gives the order total.

  3. Hands assemble a white PVC balcony glazing frame with double glazing in a workshop
    03on schedule

    Installation

    We remove the old glazing, install new frames and drip sills, and insulate seams and junctions.

  4. Finished warm glazing of the loggia with a row of white PVC frames
    04with you

    Acceptance

    We check the sashes and tightness. Payment after acceptance.

Good to know

Balcony and Loggia Glazing in Oskemen with Free Measuring

We handle balcony and loggia glazing in Oskemen from the first free measurement to installation by our own masters. The measurer takes exact sizes, helps you choose the profile, glass unit and fixings, and the price is fixed in the order after measuring. You pay after installation, and window installation carries a 5-year warranty.

Cold or Warm Balcony and Loggia Glazing and What Fits Your Balcony

Glazing type decides warmth, condensation, noise and the amount of work. Here is how the two main options differ and which one suits your task.

Cold aluminium glazing for an unheated balcony

We fit cold aluminium glazing where the space stays unheated and the goal is wind, dust and noise protection rather than warmth. The slim profile takes little width from the opening, so the glass area stays large and a narrow loggia keeps usable space. On a facade facing a busy street, the closed contour cuts street noise and dust noticeably, and the space stays fit for storage or drying laundry. For balcony and loggia glazing in Oskemen, this option is often chosen when the space stays unheated. Frames stay slim, yet this option will not hold heat on its own and needs insulation before it feels warm.

Warm PVC glazing for a loggia you live in

  • Multi-chamber profile: a plastic frame with a double-chamber glass unit keeps a loggia usable as a study or spare room.
  • Glass unit choice: the double-chamber unit carries thermal load; profile depth sets edge cold.
  • Insulation first: parapet, floor and ceiling need insulating, or the warm contour loses heat.
  • Ventilation: a closed warm loggia needs an air gap or vent, or moisture settles.
  • One job, not two: we plan glazing and insulation together so frame, sill and parapet align.

Matching the glazing to your building and balcony shape

Balcony types matched to glazing options
Balcony typeSuggested glazingWhat to check first
Small panel-block balconyAluminium or compact PVCParapet condition and fixing points
Loggia used as a roomPVC with double-chamber unitInsulation of floor and parapet
Top-floor balconyPVC, reinforced fixingWind load and anchor depth
Corner or bay balconyPVC, custom frame anglesNumber of corners and joints
Unheated storage balconyAluminiumDrainage and ventilation gaps

How the Free Measurement for Balcony and Loggia Glazing Sets Sizes and Fixings

Most sizing and fixing mistakes happen during measurement. Here is what the measurer checks, how fasteners are chosen, and why the price holds afterwards.

What the measurer checks on site

  • Free consultation: measuring is free, and the measurer comes at a time that suits you, weekends included.
  • Exact opening sizes: width, height and depth are taken at several points, as openings are rarely square.
  • Skew and level: a few millimetres of tilt affect how the sash sits and seals, so deviation is recorded before ordering.
  • Canvas and colour choice: you pick the mesh, colour and profile on the spot, each option explained.
  • Fixings discussed: the mounting method is settled during the same appointment, not on installation day.
  • Written confirmation: you leave knowing the sizes, choices and what will be fitted.

How the fixing is chosen for your window and floor

  • Window type first: the fastener matches the opening: plastic, wooden or aluminium.
  • Z-brackets: hook onto the sash and suit most standard units where drilling is avoided.
  • Pins (plungers): spring-loaded pins hold the screen against smooth, flat surfaces.
  • Magnets: a low-profile option where the screen comes off quickly and often.
  • Floor and exposure: upper floors and wind-exposed sides carry more load, so anchor depth is decided on site.
  • Winter removal: a framed screen lifts out from inside in a minute, which matters in cold months.

Why the price is fixed after measuring

  • Real dimensions first: the order is built on sizes taken on site, not your own estimate.
  • Choices settled up front: canvas, profile and fixings are confirmed before any figure is named.
  • Price locked in the order: once the measurement is signed off, the figure does not change mid-job.
  • No survey fee: measuring and consultation are free, so the quote carries no hidden charge.

Installation Steps and Paying After the Work Is Done

Installation and payment are where most orders stall. Here is what happens on site, how long each stage takes, and when money changes hands.

The installation sequence step by step

  • Own masters on site: installers use measured sizes and remove old frames for a clean opening.
  • Frame and sash setting: the team levels each frame, checks diagonals and fixes it with fasteners chosen at measuring.
  • Glass units and sealing: panes go in, the perimeter is sealed against draughts, and sashes are adjusted to close with light pressure.
  • Handover check: the crew opens and closes every sash with you, shows drainage slots and explains winter care.
  • Clean-up: packaging and offcuts leave with the team, so the loggia is ready the same day.
  • Site surprises: because the same people measure and install, a hidden slope or weak anchor point is solved on the spot.

Payment after installation and how to order

  • No prepayment: pay after installation by cash, card or Kaspi.
  • Fast reply: we answer on WhatsApp within 5 minutes, seven days a week.
  • Fixed price: the figure is locked after measuring, so the invoice matches the approved quote.
  • Order flow: send a glazing photo on WhatsApp, agree a free measuring time, confirm design and price, book installation.
  • Written scope: request the profile, glass unit and fitting list; the crew builds to that sheet.

Telling a direct contractor from an agency

  • Who measures: a direct contractor sends its own measurer; an agency forwards details to a third party.
  • Who installs: own masters stay accountable; agency crews change from job to job.
  • Who fixes the price: a direct contractor locks it after measuring; an agency adds margin later.
  • Who honours the warranty: the company you signed with should return to fix issues.
  • When you pay: after installation is safer for both sides.

Warmth, Condensation and Winter Use

Once frames are in, practical questions arise: will the room hold heat, where does pane moisture come from, and what needs attention over the years.

Will the balcony be warm in winter

Warm glazing keeps a balcony usable in winter only when it is paired with insulation of the parapet, floor and slopes. A sealed PVC frame with a multi-chamber profile and a proper unit blocks wind and street chill, but the parapet, floor and ceiling lose heat just as fast as the panes. Window slopes and the joints around the frame are where thermal bridges appear, and we finish them after the glazing goes in, as part of the same job. Treat insulation and finishing as one plan with the frames, not a later upgrade — otherwise the glazing delivers half its effect.

Why condensation forms and how to reduce it

Condensation appears when warm moist air from the flat meets a chilled surface, so we fight it with ventilation, sealing and adjustment rather than thicker panes alone. Regular airing and open trickle vents drop indoor humidity faster than any upgrade. Worn seals let outdoor air reach the inner frame and create the spot that collects water, so replacing the gasket removes the cause. Sashes that no longer press evenly leave a gap along one edge, and re-hanging them restores a tight close. Fog between the panes means the sealed unit itself has failed and needs swapping, since that moisture sits inside the chamber.

Care and repairs over the years

  • Seals: replace hardened gaskets to stop draughts and cut moisture on the frame edge.
  • Adjustment: re-hang sagging sashes so they press evenly and the lock lines up.
  • Units: swap a fogged unit, with urgent replacement within 24 hours at a surcharge.
  • Yearly check: inspect gaskets and hinges each autumn, before the cold season starts.

Warranty, Permits and the Services Behind the Glazing

Coverage terms and building permissions are the last two questions buyers raise before work starts. Here is what our terms include and what to settle beforehand.

What the warranty covers and for how long

  • Window installation: we give a 5-year warranty covering the fit and mounting work.
  • Glass units: we give a 3-year warranty on replacement; fogged or cracked units remain our responsibility.
  • Window repair: we give a 1-year warranty covering labour and replaced parts.
  • What to keep: keep the order and confirm in writing who to call if a seal or hinge fails.

Permits and building rules before you glaze

  • Start with the building manager: glazing usually needs approval from building management or the homeowners' association before work starts.
  • Check the facade rules: panel blocks and newer buildings treat loggias differently, so ask what your block allows.
  • Corner (bay) glazing: bay structures need the same approval plus a check that added weight fits the slab's design.
  • Get it in writing: written consent or a building register note protects you if a neighbour objects.
  • Ask first: confirm the requirement for your address before ordering, not after profiles arrive.

Window services that go with the glazing

  • Repair and adjustment: we fix draughts, sagging sashes and stiff handles on windows of any make.
  • Seal replacement: we fit new seals for KBE, Rehau, VEKA and Provedal units, whatever the original maker.
  • Glass units: we replace fogged or cracked units, with urgent work done within one day at a surcharge.
  • Insulation and slopes: we finish the opening around the glazing so the new structure holds warmth.
  • Protection: grilles, limiters and locks for balcony doors and windows.
  • Screens and doors: we deliver and fit mosquito nets, and repair nets and replace their fixings.

What to check before ordering balcony and loggia glazing

The right choice for a balcony or loggia comes down to matching the system to how you use the space, then getting the details right.

  • Type first: cold aluminium suits an unheated balcony, warm PVC suits a loggia you live in year-round.
  • Measure before you commit: exact sizes and the right fixing prevent most problems later.
  • Plan insulation with glazing: warmth comes from the whole assembly, not the frames alone.
  • Watch the seals: condensation and draughts usually trace back to worn seals or adjustment.
  • Check warranty and permits: confirm both before work begins, not after.

Questions about balcony and loggia glazing in Oskemen

Choosing glazing, installation, approvals, replacing double glazing

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Which glazing should I choose for a balcony in Oskemen with cold winters?

For the local climate, people most often choose warm PVC glazing with energy-efficient double glazing: it keeps in heat and quiet. Cold aluminium is suitable if the balcony stays unheated and you only need protection from wind and snow.

02Will the balcony parapet hold the weight of plastic windows?

Usually yes, but the load-bearing capacity of the parapet is assessed by the surveyor on site, especially in older buildings. For weak parapets, a lighter profile or cold aluminium is chosen so as not to overload the base.

03Do I need to get approval for balcony glazing from the KSK or akimat in Kazakhstan?

If the appearance of the facade does not change, permission is usually not required, but each building has its own rules. If you extend outward, combine with a room, or change the profile colour, it is worth checking the procedure with the KSK or akimat in advance.

04How is the old balcony glazing removed and what happens to the old frames?

Old frames and double glazing are removed carefully so as not to damage the parapet and reveals, then taken out and hauled away. Removal is included in turnkey work, and the procedure for disposing of old structures is agreed during the measuring visit.

05Can I replace only the double glazing on an already glazed balcony?

Yes, if the profile and hardware are intact, only the double glazing is replaced without removing the frames. The technician will check the seals and sashes, and if the profile is worn, they will suggest a complete replacement of the structure.

06What mistakes are most often made when glazing a balcony?

Most often people skimp on fixings and sealing, so the frames are draughty and the seam freezes. Another mistake is insulating without proper glazing and ventilation, which leads to condensation building up on the balcony.

Reviews of balcony and loggia glazing in Oskemen

5,0based on 97 reviews on platforms
All reviews