Craftsman by a plastic window with a new double-glazed unit in the dining room
from 1 300 ₸We replace damaged glass without removing the window and confirm the price in the order before work begins.Calculate

Double Glazing Replacement in Oskemen

Kitchen · Gas stove

Laminated glass

Does not shatter into fragments on impact or sudden temperature changes. A budget option is security film from 8 000 ₸ per m².

A technician holds a sample of laminated glass with a film between the layers
GoogleYandex MapsZoon

5,097 reviews on review sites

What double glazing replacement in Oskemen includes

The old glass goes, the new one fits into the same sash. The window is not removed, and the surrounding trim stays intact.

Service overview

The technician opens the sash, removes the glazing beads and takes out the damaged unit. Then he places the new unit, made to the surveyor's measurements, on setting blocks, refits the beads and checks that the window closes evenly.

Oskemen has snowy, frosty winters and hot summers, so it makes sense to improve the window during replacement. For kitchens and children's rooms, laminated glass is often chosen; for lower floors, frosted or tinted glass.

Empty PVC window sash against the wall and removed glazing beads on the floor next to a balcony door
from 19 500 ₸

new unit per square metre

3 years

warranty on double glazing replacement

09:00–19:00

hours when we take requests

Glass types
LaminatedFrostedTintedCoatedStandard

How glass replacement in the sash is performed in Oskemen

Four common reasons people from Oskemen contact us.

A craftsman inserts a white glazing bead into the sash with a rubber mallet
  • 01Safety needed

    In the kitchen or children's room, we install laminated glass so there are no sharp fragments on impact.

  • 02Glass is scratched

    Deep scratches from wind-blown sand and cleaning cannot be removed by polishing, so we install a new unit.

  • 03Chip after renovation

    The window was hit with a tool or stepladder, and a crack spread from the chip; it is better to replace the unit.

  • 04Balcony unit cracked

    On a cold balcony, glass cracks from frost and sash slamming; we replace it in the same frame.

Types of glass for a new unit in Oskemen

You can install the same unit as before, or make the window safer, warmer or hide it from view.

Double-chamber

living rooms

White PVC window in winter, a snowy courtyard outside, a floor lamp and a small table beside it

Three panes hold heat in severe frost, and frost does not build up along the edge.

from 20 000 ₸/m²

Coated

corner flats

White PVC window in a home office, a desk with a laptop and a lamp in the foreground

Energy-saving glass reflects radiator heat back into the room.

from 15 200 ₸/m²

Single-chamber

balcony, country house

White PVC window in a dining room, with an oak table and chairs next to it

A lightweight unit of two panes for spaces that are not heated in winter.

from 12 600 ₸/m²

Tinting

low floor

A plastic window with tinted glass, houses and mountains visible through the glass

The film hides the room from passers-by and softens the summer sun.

from 5 500 ₸/m²

Security film

kitchen, kids' room

Hands apply a clear protective film to a window glass with a squeegee

The protective layer holds the shards if the glass still cracks from an impact.

from 8 000 ₸/m²

Double glazing replacement prices in Oskemen

The price depends on the area, glass type and number of chambers; we give the sum after measuring.

Type of workPrice
Double glazing replacement, per m²unit sized to the sashfrom 19 500₸ per m²
Double-chamber double glazingfor severe frostsfrom 20 000₸ per m²
Single-chamber double glazingbalcony, country housefrom 12 600₸ per m²
Energy-saving glass in the unitkeeps the heat infrom 15 200₸ per m²
Glass in a PVC doorbalcony doorfrom 22 000₸ per m²
Broken glass replacementsingle panefrom 8 000₸ per m²
Security filmkitchen, children's roomfrom 8 000₸ per m²
Tintingwindows facing neighboursfrom 5 500₸ per m²
Glazing bead, extrareplacing a broken onefrom 1 300₸ per piece
Sash adjustment with removalheavy unitfrom 4 000₸ per sash
Window inspection without an ordertechnician consultationfrom 3 600₸ per visit

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi

Book a measuring visit

Why customers order glass replacement from us in Oskemen

Order terms in Oskemen.

Warranty3 years

on the new unit and the technician's work

Pricein the order

we name it after measuring, and it won't change

Measuringfree

we come, measure the glass and help you choose an option

Urgent1 day

production and replacement of broken glass with a surcharge

Paymentafter

installation: cash, card or Kaspi

Response5 minutes

on WhatsApp to a photo of the damaged window

Hours09–19

we take requests seven days a week

Experiencesince 2012

we work across Kazakhstan

How double glazing replacement is carried out in Oskemen

Four steps, no extra visits.

  1. A hand holds a phone with a dark screen by a plastic window for measuring
    01reply in 5 minutes

    You message us

    Send a photo of the glass on WhatsApp and tell us what you want: just a whole window, strength or privacy.

  2. A tape measure measures the sash opening of a white plastic window, only hands are visible
    02free

    Measuring

    The measurer takes dimensions, checks the profile and glazing beads and helps you choose the right glass.

  3. Hands assemble a glass unit from glass panes and an aluminum frame on a workbench
    03urgent — one day

    The unit

    We make a unit for your window; if the glass is broken, we'll make and install it within a day with a surcharge.

  4. A new glass unit is installed in a white plastic window sash, clean glass
    04payment after

    Installation

    The technician replaces the unit, refits the glazing beads, adjusts the sash and only then takes payment.

Good to know

Double Glazing Replacement in Oskemen

Our company handles double glazing replacement in Oskemen as a direct contractor with its own fitters, so the frame stays in place and only the sealed unit changes. We measure for free, fix the price in the order after measuring, and back the replacement with a 3-year warranty. Urgent units can be made and fitted within one day.

How to tell a failed double glazing replacement unit from a worn seal

Fogging on a window does not automatically mean the glazing is finished. The trick is telling surface condensation from moisture sealed inside the panes, and knowing when a tired gasket is the real culprit.

Where the moisture actually sits

Condensation that wipes off the room-side surface points to humidity and a seal problem, while moisture trapped between the panes means the sealed glazing has lost its hermetic edge. Run a finger across the inner face: if the haze clears and comes back later, the glazing itself is fine and the room is simply too damp. If the film sits on the second or third pane and never wipes away, the desiccant inside the spacer has absorbed all it can and the barrier has failed. A fogged assembly cannot be dried out or re-sealed on site, so wiping it only hides the symptom until the next cold snap. Look at the edge of the glass too — a wavy or shrinking black sealant line is the clearest early warning before the haze even appears.

When a new seal or hardware is the real fix

We check the gasket and hardware first, because a tired seal on a 15-year-old frame often causes the fogging while the glazing itself is still sound. Our measurer runs a hand along the gasket line on KBE, Rehau, VEKA and Provedal profiles, tests the handles and hinges, and looks for gaps where the sash meets the frame. A worn strip lets warm room air reach the cold edge of the glass, and that is where the beads of water form every morning. Replacing the seal on a frame that still holds its shape is the cheaper path, and only an assembly that fails the between-panes test goes to replacement. Ask for that test to be shown to you on the spot rather than described over the phone.

Replacing the double glazing replacement unit without touching the frame

The work happens inside the window that is already in the wall. The frame, sash and hardware stay where they are; only the sealed glazing changes, and the steps below run from the first call-out to the finished glazing.

From the measuring visit to the fitted unit

The measurer comes at a convenient time, takes the sizes and helps choose the glazing, and the double glazing replacement oskemen customers order is then made to those exact dimensions. Measuring and consultation are free, and the appointment covers more than a tape reading: the specialist checks the rebate depth, the condition of the glazing beads and how the sash sits, then talks through chamber count and glass options for the room. Every sealed assembly is built to the millimetre taken on site, not to a nominal size from a catalogue. Measuring before the pane is built keeps the new glazing from sitting loose or binding in the rebate, so never order from a tape measure you took yourself.

What the fitters do on the day

  • Own team on site: our fitters, not a subcontracted crew, carry out the removal and refitting at your address.
  • Old glazing out: the beads are eased off, the failed pane lifted clear and the rebate cleaned of old sealant.
  • New pane in: the replacement is set on fresh setting blocks, squared in the frame and the beads refitted.
  • Seal check: the fitters run a hand along the hermetic line and test the sash for binding before signing off.
  • Same-day handover: the window goes back into use the same day, and you clear the sill and move curtains aside beforehand.

Choosing a double glazing replacement unit that suits an East Kazakhstan winter

Sharp winter cold and sudden temperature swings set their own demands on chamber count and heat retention, so it helps to separate what actually keeps a flat warm from what only sounds impressive on a spec sheet.

Chambers, coating and the thickness that fits

Which assembly depth suits which room and frame opening
Unit typeChambersBest forFits existing rebate
Single-chamberOneBalconies, utility roomsSlim rebates, older frames
Double-chamberTwoLiving rooms, bedroomsStandard rebates
Energy-saving doubleTwoCold-facing roomsStandard rebates
Slim buildOneNarrow or shallow framesTight rebates

One cracked pane or the whole unit

A sealed assembly is built as one hermetic piece, so a single cracked pane means the whole thing is replaced rather than just the broken sheet. Each build is two or three panes held apart by a spacer frame and sealed around the entire perimeter with primary and secondary sealant. That seal is what keeps moisture out and the insulating gas in. Cutting one pane out of a finished build destroys the perimeter seal, and no workshop can rebuild it on site with the same tightness as the factory line. A partial repair looks fine for a month, then fogs from the inside once the first hard frost arrives, and the owner ends up paying twice for the same opening.

Plastic, wooden and aluminium frames we work with

Sealed units sit in more than PVC. Timber and metal have their own geometry, and the material changes how a replacement is measured, seated and fixed on the day.

Matching the unit to the frame material

We fit double glazing replacement Oskemen homeowners order into PVC, timber and metal frames, and on wood or aluminium the rebate and glazing beads decide how the new pane is seated. Plastic is the most predictable: standard rebate depths and removable beads let the fitter lift the old glazing out and drop the new one in without touching the profile. Timber varies more — older sashes may have been repainted or re-glazed several times, so the beads come off carefully and sometimes need replacing. Metal systems, common on balconies and shopfronts, often hold the pane with pressure plates and gaskets rather than trim strips, which means the seal is renewed as part of the job. Wood shifts with the seasons more than plastic, so the fitter leaves the right clearance instead of forcing the panel tight.

Broken glass and urgent call-outs

A smashed pane can be made and fitted within one day on an urgent order, with a surcharge on the unit itself, so a broken window does not stay open overnight. That express slot covers the sealed glazing only — measuring, manufacture and fitting are compressed into a single working period, and the frame is checked at the same visit in case the impact has shifted a bead or hinge. If the break happened late in the evening, our team confirms the slot first thing and works to a same-day window rather than a fixed hour. Boarding a broken opening before the fitters arrive keeps wind and rain off the frame, and the urgent slot is worth booking the moment the glass goes.

Warranty, handover and care after fitting

A new sealed assembly is only as good as the handover that follows it. This section covers what our guarantee protects, how to check the finished job, and the habits that keep the glazing clear and dry.

What the 3-year warranty covers

We give a 3-year warranty on glass unit replacement, covering the sealed assembly and the fitting work, and payment is taken after installation by cash, card or Kaspi. The price is fixed in the order once measuring is done, so the figure you agree to at the visit is the figure you settle at the end. Any fault traced back to the assembly or to our installation is handled under that three-year term. Keep the order sheet with the measured sizes and the agreed specification, because a claim is checked against those figures rather than a verbal description of what was fitted.

Checking the job and keeping the unit clear

  • Sealant line: run a finger along the edge and confirm the bead is continuous, smooth and free of gaps.
  • Beads and trim: press each glazing bead gently, since a loose one means the pane is not seated properly.
  • Haze between panes: look at the glazing at an angle in daylight, as mist inside the cavity is a fault.
  • Daily airing: open a window for ten to fifteen minutes twice a day so moist air escapes.
  • Drainage slots: check that the weep holes under the frame stay open, since blocked slots trap water.

How to check a double glazing replacement unit after replacement

A short recap of the decisions that matter most when a sealed assembly fails, so the next step is clear before anyone picks up a tool.

  • Moisture between the panes: fog or droplets inside the glass mean the sealed glazing has failed, while fogging on the room side usually points to the seal or the frame.
  • The frame stays: in most cases the frame is sound and only the glass assembly is swapped, so the walls and sills are left untouched.
  • Measure first, build second: a measuring visit before the unit is made keeps the fit right and avoids gaps or cracked edges on the day.
  • Depth before coating: the unit thickness has to match the rebate in the frame before any coating or chamber count is chosen.
  • Check at handover: look over the sealant line and glazing beads when the job is done, then air the rooms daily to keep condensation down.

Questions about double glazing replacement in Oskemen

Replacement without changing the window, Individual panes, Energy efficiency, Warranty

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can the double glazing be replaced without changing the window itself?

Yes, in most cases it is enough to install a new unit into the existing frame and sash. The old double glazing is carefully removed and new ones with new glazing beads and seal are put in their place.

02Can only one cracked pane be replaced instead of the whole double glazing?

No, double glazing is a sealed unit, and replacing a single pane in it is impossible without breaking the seal. If there is a crack, the whole unit is replaced, otherwise it will start to fog up and freeze.

03Can an energy-efficient double glazing be installed in an old frame?

Yes, an energy-efficient unit is suitable for an old frame if its profile and hardware are in good condition. The thickness and weight of the unit are selected for the specific frame so that the sash does not sag.

04Can double glazing be replaced in a balcony door or only in a window?

We replace units not only in windows but also in balcony doors and PVC doors. The technology is the same, only the size of the leaf and the load on the hinges are taken into account.

05Can double glazing be replaced urgently if the glass has cracked and it is freezing outside?

Yes, we provide urgent manufacturing and replacement of double glazing within one day, working without weekends. Such urgency comes with a surcharge on the price of the unit, and while waiting, it is better to cover the cracked glass with film.

06Is there a warranty for double glazing replacement and what exactly does it cover?

We provide a 3-year warranty for double glazing replacement. It covers the unit itself and the quality of its installation, but damage from impact or improper care is not covered.

Reviews of double glazing replacement in Oskemen

5,0based on 97 reviews on platforms
All reviews