PVC window
Installation of a standard PVC window — from 4 650 ₸ per m², turnkey with installation — from 60 000 ₸ per m².


PVC window
Installation of a standard PVC window — from 4 650 ₸ per m², turnkey with installation — from 60 000 ₸ per m².

Wooden window
Repair of wooden windows — from 1 800 ₸, replacement with PVC — at the installation price from 4 650 ₸ per m².

Balcony block
Balcony block with door and installation — from 95 500 ₸ per unit, installation to GOST — from 5 200 ₸ per m².

Double glazing
Double glazing replacement — with a 3-year warranty, urgent production and replacement — within one day.

Windowsill
Installation of a PVC windowsill — from 5 500 ₸ per linear metre, flashing — from 3 250 ₸ per linear metre with sealing.

5,097 reviews on review sites
Removal of the old frame, installation of the new structure, windowsill, flashing and reveals — the work that makes a window warm and airtight.
Window replacement is not just a new frame with double glazing. The work includes removal of the old structure with disposal, installation of the new one to GOST with vapour and waterproofing, and fitting of the windowsill, flashing and reveals. Every element affects warmth and protection from moisture.
In Semey there are openings in panel buildings, Stalin-era buildings and new builds. In panel buildings the walls are thin and openings often have slight vertical deviations, so precise fitting of the frame matters. In Stalin-era buildings the openings are wider and taller, often with wooden frames that require careful removal. In new builds the walls settle, and the joint needs a margin for sealing. The master determines the type of opening during the measuring visit and selects the fixings and insulation.

installation of a standard PVC window
warranty on window installation
urgent double glazing replacement
Installation to GOST with vapour and waterproofing, fixing with anchors or plates, sealing the joint — these stages determine whether the seam will freeze.

The frame is levelled, fixed with anchors or mounting plates, then the joint is filled with expanding foam with vapour and waterproofing.
Anchors provide rigid fixing into the wall, plates are used for narrow openings and wooden windows. The choice depends on the wall material and the weight of the structure.
Inside, the joint is covered with vapour barrier tape, outside — with pre-compressed sealing tape, so that moisture does not penetrate the insulation and destroy the joint.
If the seam freezes, the window is re-installed according to GOST: the old layer is removed, re-insulated and sealed. Sealing of external seams — from 2 000 ₸ per linear metre.
During the first heating season, check the seam perimeter: draughts are noticed by cold air from under the windowsill, condensation on the reveals and freezing corners. Inspect the joint along the entire perimeter, pay attention to cracks in the foam and peeling of the vapour barrier tape. If the draught does not disappear after adjusting the sashes, call a technician for seam diagnostics.
Profile, filling and hardware are selected for the task: warmth, quiet, light or budget. The measurer will help you choose the design and double glazing.
Warmth and quiet

Plastic window with turnkey installation — from 60 000 ₸ per m². Suitable for apartments and offices.
Repair or replacement

Repair of wooden windows — from 1 800 ₸, replacement with PVC — at the installation price from 4 650 ₸ per m².
Lightweight structures

Aluminium is installed on balconies, loggias and verandas. Installation — from 4 650 ₸ per m², according to GOST — from 5 200 ₸ per m².
Less heat loss

Replacement of double glazing — with a 3-year warranty. Urgent production and replacement — within one day.
Lifespan and repair

Original hardware lasts longer than analogues and is repairable. Selected for the profile and sash weight.
The cost of work and structures is indicated per unit; the price is fixed in the order after measuring.
| Type of work | Price |
|---|---|
| Installation of a PVC windowstandard installation | from 4 650₸ per m² |
| Window installation to GOSTwith vapour and waterproofing | from 5 200₸ per m² |
| Dismantling of old windowwith disposal | from 1 800₸ per m² |
| Single-leaf PVC windowwith installation | from 42 500₸ per window |
| Double-leaf PVC windowwith installation | from 65 500₸ per window |
| PVC window with installationturnkey | from 60 000₸ per m² |
| Balcony block with doorwith installation | from 95 500₸ per unit |
| Installation of PVC windowsillwith trimming | from 5 500₸ per linear metre |
| Installation of window flashingwith sealing | from 3 250₸ per linear metre |
| PVC reveals (sandwich panels)with fittings | from 4 700₸ per linear metre |
| Reveals for a standard window, turnkeywith material | from 15 000₸ per window |
| Sealing of external jointswith pre-compressed sealing tape | from 2 000₸ per linear metre |
The price unit includes dismantling and installation work, as well as removal of the old frame.Measuring and consultation — free.Payment after installation: cash, card or Kaspi.
Book a measuring visitFacts about the company: installation warranty, free measuring, work without days off and payment after installation.
For window installation — 5 years, for double glazing replacement — 3 years.
Measuring and consultation are free, the measurer will come at a convenient time.
We accept requests every day, including Saturday and Sunday, from 09:00 to 19:00 in Semey.
Cash, card or Kaspi — after completion of work.
The price is fixed in the order after measuring, without additional charges during work.
Warranty for window repair — 1 year for work and replaced components.
We replace seals in windows of any manufacturer: KBE, Rehau, VEKA, Provedal.
You can order in 17 cities of Kazakhstan.
Four steps from request to window check.

The measurer will come at a convenient time, take the dimensions of the opening, help choose the design and fixings.

The structure is made to your dimensions. The time depends on the window type and double glazing, specified when ordering.

On the installation day, clear the opening of furniture and curtains, provide access to sockets. Dismantling the old window and installing the new one takes several hours, the exact time is given by the technician during measuring.

The sashes, hardware and seam tightness are checked, and they show how to care for the window.
Good to know
We handle pvc window installation semey residents can book directly with the crew that does the work, not through a middleman. A free measuring visit sets the size, profile and fixings for your opening and floor, our own installers fit the window, and you pay only after installation. Every fitting carries a 5-year workmanship warranty.
Not every tired-looking window needs to come out of the wall. We look at the frame, the sashes and the glass unit first, and only then decide what actually has to change.
| What is wrong | What we check | The job that fits |
|---|---|---|
| Glass is misted or cracked, frame sound | Frame straightness, fittings, seals | Glass unit replacement |
| Draughts, stiff handles, sash rubbing | Seals, hinges, alignment | Repair and adjustment |
| Warped frame, rotten or cold reveal | Whole opening and profile | Full window installation |
We replace the sealed glazing on its own whenever the frame and sashes are still solid, and a standard swap can be turned around within a single day when you need it urgently. A sound profile outlives its glass, so paying for a whole new window when only the sealed unit has failed mostly buys you nothing extra. Our glass unit replacement work carries a 3-year warranty, and the urgent one-day option is there for a broken pane in a bedroom or a shopfront that cannot wait. The swap only pays off while the frame is straight and the fittings still close tight, though. A pane that keeps misting after a swap usually means the frame seal or the drainage is at fault, so the glass was never the real culprit.
Every job begins with a measuring call that costs nothing: the surveyor takes the size of your opening, checks the wall and level, and helps you pick the profile, glass unit and fixing for your building.
Our surveyor comes at a time that suits you, measures the aperture, checks the wall and level, and helps you choose the design, mesh and fastenings on the spot, all free of charge. The appointment covers more than a tape measure: the specialist notes the reveal depth, how square the aperture is, the sill height and how the frame will sit against the masonry, then fixes the order price on the spot. Measuring and consultation cost nothing, and the surveyor is available seven days a week. A millimetre lost at this stage shows up later as a draught or a sticking sash, so the appointment is where most fitting faults are actually prevented. This is why pvc window installation semey starts with a free measuring visit before any work is scheduled.
| Choice | Options we fit | What it suits |
|---|---|---|
| Profile | Economy, Prestige | Standard rooms vs larger sashes |
| Glass unit | Single or double chamber | Warmer rooms, colder winters |
| Fixing | Anchors, plates, Z-brackets | Panel, timber or aluminium openings |
The job moves through clear stages — taking out the old window, setting and foaming the new one, finishing the opening, adjusting the fittings and clearing the room. Here is what each stage involves.
A single window is usually fitted within a working day, and the panels go on once the foam has cured, which is why we never rush the finishing stage. Removal, setting on blocks and filling take the bulk of the morning; the sill and drip then close the opening, and the fittings are adjusted last so each movable part pulls evenly against the gasket. The seal needs time to harden through its full depth rather than just at the skin, and that wait decides when the panels can follow. Closing the opening over a soft layer traps moisture behind the panel, and that is exactly where cold bridges and mould appear a season later. Ask the crew to show you the cured line before the panels go up — a firm, dry surface means the opening is ready to close.
A guarantee and a clear payment moment separate a direct crew from a middleman. Here is what our cover includes, and how to accept a finished window on the day it goes in.
Every window we install carries a 5-year guarantee on the fitting, a 3-year one on glass unit replacement and a 1-year one on repair work and the parts we replace. That cover includes the frame fixing, the seals we set and the alignment of the sashes, so a sash that drops or a seal that lets in a draught is our job to correct. It does not cover damage from a third party, a window taken out and refitted by someone else, or glass broken after handover. The cover stays valid while the unit is left untouched, so call us first if anything feels off.
Semey winters bring hard frost and steady wind, and both test how tightly a window sits in its frame. This section covers cold-weather fitting, why a window can draught or mist up, and how reveals are insulated.
We fit windows into panel, timber and aluminium walls and work through the cold months, taking extra care with foam and sealing when the temperature drops. Below minus five degrees the foam cures slowly, so the crew keeps the surface dry, warms it and lets the sealant set before trimming. Panel walls in the older blocks are often uneven by a few millimetres, and we level the frame with packers rather than forcing it into place. In a timber house the reveal keeps moving with the seasons, so the fixing has to allow for that movement or the frame will bind within a year. Ask the measurer to note the wall material and the floor level on the order — that single line decides which fixings and which foam the crew brings to the job.
A draught once the work is done usually traces back to a seal or a joint at the edge rather than the window itself, and we fix it by replacing the gasket or insulating the gap. We change rubber seals in windows of any maker, including KBE, Rehau, VEKA and Provedal profiles, because the material hardens and loses its grip over several cold seasons. Wind on an upper floor finds the smallest gap under the sill, so the crew checks those joints first and re-foams where the old insulation has cracked. Glass that mists on the room side points to ventilation, not a failed unit, so opening the sash daily often clears what a new glass unit would not. If the misting sits between the panes, the sealed unit has failed and needs swapping.
A window decision comes down to a few checks: what is actually faulty, what the measuring visit confirms, and what the fitting and paperwork should include. Here is the short version to keep before you book anything.
Stages, installation, double glazing, profile
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionIf the frame is warped, the sashes have sagged and cannot be adjusted, cracks have appeared in the profile, or there is cold penetration along the seam, a repair will not help and a new window is needed. When the defect is local (seal, hardware, double glazing), a repair is sufficient.
In addition to installing the structure, a replacement includes removing the old window, sealing the seams, installing the sill and reveals, and adjusting the hardware. The exact list depends on the condition of the opening and your preferences.
Yes, installation is possible in cold weather: the technicians work quickly and use a heat curtain to keep the room from cooling down. The main thing is that the temperature is not extremely low, otherwise the foam and sealant lose their properties.
For quiet and warmth, a double-chamber double glazing with an energy-saving coating and different glass thicknesses is suitable. We will select the specific parameters during the free measuring visit, taking into account the floor and the side of the building.
Yes, the measurer will take the unevenness into account and choose an installation method so that the window sits level. In complex cases, additional preparation of the opening may be required, which will be agreed in advance.
In older buildings, the opening may be uneven and the old window may be difficult to remove. The measurer will assess the condition and suggest the best installation method.
Anchors or brackets are used for installation, depending on the wall material and the type of window. The fixings are selected to ensure reliable fastening and proper operation of the sashes.
Pay attention to the number of chambers and the wall thickness of the profile: multi-chamber systems with good thermal insulation are suitable for a cold climate. The measurer will help you choose an option for your home and budget.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp