Double glazing replacement
If condensation is trapped between the panes, the unit's seal is broken. Replacement — from 19 500 ₸ per m² to the opening size.


Double glazing replacement
If condensation is trapped between the panes, the unit's seal is broken. Replacement — from 19 500 ₸ per m² to the opening size.

Seal replacement
Hardened rubber no longer holds heat. We replace the seal in windows of any manufacturer — from 1 000 ₸ per linear metre.

Hinge replacement
The sash catches the frame or rubs the threshold — the hinges are worn. Hinge replacement — from 4 750 ₸ per item.

Hardware repair
The handle turns freely, the sash doesn't seal, micro-ventilation doesn't work. Locking mechanism repair — from 7 800 ₸.

5,097 reviews on review sites
Repair restores sash movement, seal pressure and tightness without replacing the whole window
Window repair means working on the parts that wear out fastest: hardware, hinges, handle, seal and double glazing. The frame and profile usually stay in place; only the failed element is replaced.
Most often it's enough to adjust the sash or replace one part. A full window replacement is rarely needed — when the profile itself is damaged or the frame geometry is so distorted that seal pressure can't be restored.

warranty on window repair: work and replaced components
warranty on double glazing replacement
accepting requests in Semey, working without days off
Six common causes: seal pressure, hardware, hinges, handle, seal, double glazing

Seal pressure has weakened or the seal has lost its elasticity.
The sash catches, the handle doesn't turn all the way — a sign of a locking mechanism fault.
The sash catches the frame at the bottom or side — hinges are worn or out of adjustment.
The handle turns freely, is cracked or loose.
Moisture settles where seal pressure is broken or the reveal is cold. First check the seal and adjustment, then the reveal insulation.
A chip or crack in the glass, fog between the panes.
Five areas: hardware, hinges, handles, seal, double glazing
Seal pressure and movement

We adjust the sash pressure and movement so the window closes tightly and effortlessly.
Sash hinges

We replace worn hinges when the sash sags and catches the frame or threshold.
Matched to your profile

We install a new handle that fits your hardware's mounting size.
KBE, Rehau, VEKA and others

We replace the seal in windows from any manufacturer along the entire sash perimeter.
To fit the opening

We replace foggy or broken units with new ones based on measurements taken.
Guidelines by type of work; the exact amount is confirmed after inspection
| Type of work | Price |
|---|---|
| Call-out and inspection by a technicianwithout ordering a repair | from 3 600₸ per job |
| Simple sash adjustmentseal pressure and sash movement | from 3 000₸ per sash |
| Complex adjustment with sash removalremoval and rehanging | from 4 000₸ per sash |
| Window handle replacementmatched to the profile | from 2 750₸ per item |
| Hinge replacementsash hinges | from 4 750₸ per item |
| Hardware repairlocking mechanism | from 7 800₸ per job |
| Sash hardware replacementsash set | from 10 000₸ per sash |
| Seal replacementaround the sash perimeter | from 1 000₸ per linear metre |
| Double glazing replacementto the opening size | from 19 500₸ per m² |
| Broken glass replacementsingle glass | from 8 000₸ per m² |
| PVC window sill installationwith cutting | from 5 500₸ per linear metre |
| Drip sill installationexternal drip sill | from 3 250₸ per linear metre |
| Mosquito screen repairmesh and fixings | from 2 500₸ per item |
| Air inlet valve installationair supply | from 6 000₸ per item |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi
Call a technicianOur own production, warranty on work, citywide visits
on work and replaced components
on window installation work
on double glazing replacement
we accept requests every day
cash, card or Kaspi
a technician will come at a convenient time
the price is fixed after measuring
you can order in 17 cities of Kazakhstan
From request to sash check — four steps

You describe the problem: draught, won't close, sash sagging. The technician clarifies the profile type and floor to bring the right parts.

Checks sash movement, hinge condition, seal pressure, handle and perimeter seal, and looks for condensation in the double glazing.

Determines what's needed: adjustment, new hinge, handle, seal or double glazing. Agrees the scope of work with you.

Adjusts or replaces the part and checks that the sash closes properly and the seal pressure holds along the entire perimeter.
Good to know
For window repair in Semey, we send our own crews rather than subcontractors. We fix draughts, sticking sashes and fogged glass, replace seals on KBE, Rehau and VEKA frames, and swap a broken glass unit within a day. Measuring is free, you pay after installation, and every repair carries a one-year warranty.
A window rarely fails without a warning. First you notice a draught, a fogged pane or a handle that no longer turns. Below, each symptom is matched to the fault behind it and the work that actually fixes it.
A draught almost always comes from one of three places — a worn seal, a leaf that no longer presses evenly, or a frame that has shifted — and each one points to a different fix. Rubber gaskets harden with age and summer sun, losing the compression that keeps air out; a leaf that dropped on its hinges leaves a thin gap along one edge; a frame that moved in the opening opens a line where the wall meets the profile. Run a hand along the closing edge on a cold day. If the cold runs evenly down the whole side, the gasket went flat and needs replacing. If it gathers at one corner, the moving part needs adjusting before you touch the rubber.
Moisture on the room side of the pane is usually a ventilation and humidity question, but condensation between the panes means the sealed unit lost its seal and needs replacing. Cooking, drying laundry indoors and closed vents push humidity into the air, and the coldest surface in the room — the pane — collects it first. That kind of wetting clears once you air the rooms properly and let the trickle vents work. Water trapped inside the unit looks different: the desiccant along the spacer is saturated, the cavity clouds at the edges, and no amount of ventilation will clear it. Before booking any repair, wipe the pane and check whether the water sits on the room side or is sealed inside the unit — that single check decides whether you need a new unit or just better airflow.
A leaf that catches on the frame or will not latch is nearly always a hinge and alignment problem, and we correct it by adjusting the fittings rather than replacing the moving part. Hinges carry the full weight for years, and the lower corner slowly drops until it scrapes the frame or the handle stops meeting the striker plate. We realign the hinges, reset the pressure of the locking points and check that the handle turns without force. Fittings cleaned and lightly lubricated a couple of times a year hold their adjustment far longer, so a short routine twice a year saves a call-out. For window repair Semey owners bring us plenty of glazing that only needed a small hinge adjustment before it closed cleanly again.
A master works on the moving parts, the rubber, the hardware and the glass, and each job answers a different symptom. Fixing all four at once is rarely needed — the fault tells you which one applies.
We adjust the fittings when the sash no longer presses evenly, and we replace the rubber when it has flattened or cracked — the two jobs solve different symptoms and are often confused. Adjustment moves the leaf back into square: the eccentrics on the hinges and the striker plate are turned so it meets the frame with even pressure along all four sides. Swapping the gasket is a materials job — the old strip comes out of its groove and a new one goes in, and we change it on units of any manufacturer, including KBE, Rehau, VEKA and Provedal profiles. A gasket that looks fine can still be the culprit if it has hardened with age, so press it with a fingernail — one that does not spring back is due for replacement even without visible cracks. The master decides on site which one the symptom calls for.
| Job | What it fixes | Time on site | Same day |
|---|---|---|---|
| Fitting adjustment | Leaf catches, will not latch, uneven press | Short visit | Yes |
| Gasket swap | Even draught along the closing edge | Short visit | Yes |
| Handle or hinge swap | Broken handle, failed hinge | Short visit | Yes |
| Glass unit swap | Fogged or cracked glass | Made to size | Usually within a day |
| Full re-hang | Leaf dropped after years of use | Longer visit | Yes |
If the frame is sound and only the moving parts have worn, a small repair restores the unit for years rather than months. A unit that still closes flush at the corners, shows no rot or cracking in the profile and has not lost its shape over years of use is a candidate for new gaskets, hinges and a handle rather than a whole new unit. The frame, not the hardware, sets the lifespan — a plastic or aluminium profile that is still square will outlast several sets of rubber and hinges. Ask the master to check the diagonals before quoting: if they match, the money goes into moving parts, not into a new one.
Repair or replace is the question most owners bring to us first, and the answer rarely depends on how old the unit is. It depends on the state of the structure the moving parts hang on.
A warped frame, rot through the timber or a profile that no longer holds a seal points to replacement, while everything that moves can usually be repaired. Look at the structure itself before you price any work: a surround that has bowed away from the wall, soft wood around the hinges or a sill split along its length will not hold a fresh gasket or a rehung leaf for long. Hardware, handles, hinges and gaskets are wear items and swap out cleanly; the fixed frame is what everything else hangs from. Check it with a spirit level along the sill — a surround that has dropped at one end will keep pulling the leaf out of line no matter how often the fittings are adjusted. A repair on a dropped surround buys months, not years.
Cleaning, lubricating and wiping the seals are safe to do yourself, but adjusting hinges and replacing a glass unit are jobs where a wrong turn makes the fault worse. A soft cloth, a little silicone grease on the moving hardware and a vacuum along the seal channel cost nothing and solve a surprising share of draughts and squeaks. Beyond that, the risk climbs: hinge geometry decides how the leaf sits in its opening, and a double-glazed panel carries weight that has to be seated evenly. Over-tightening a hinge screw to stop a draught is the most common self-repair mistake — it pulls the leaf out of square and turns a small adjustment into a re-hang.
A properly repaired unit keeps working for years, and our one-year warranty on the repair covers both the labour and the components we replaced. That covers hardware, hinges, handles and gaskets we swapped during the visit, so a fault that returns inside the term comes back to us rather than to your budget. The fix lasts longest when the moving hardware is cleaned and lubricated twice a year and the seals are kept free of paint and grit, so the maintenance routine matters as much as the repair itself. Units that are never wiped down or greased are the ones that come back after a few seasons.
Most requests come in for plastic units, but the material under the sash changes the job: timber takes different fittings from aluminium, and each type needs its own sealing strip.
We replace seals on units of any manufacturer, including KBE, Rehau, VEKA and Provedal, because the strip is matched to the profile rather than to a single brand. A PVC frame holds its shape for decades, yet the rubber inside the rebate compresses and hardens long before the sash itself fails. On such systems the strip sits in a specific groove, so a section cut for one profile will not sit tight in another — the wrong part leaves a draught in the same corner it was meant to close. We match the seal section to the profile on site. The brand matters less than the groove it takes, so send a photo of the frame corner when you message us and we can confirm the right part before the visit.
Wooden units are repaired rather than swapped out whenever the timber is sound, because the frame itself can be sanded, re-sealed and re-hung instead of replaced. Wood moves with the seasons, so a sash that swells in damp weather and drags on the sill in summer is telling you about moisture, not about a broken hinge. Rot is the real limit: soft, crumbly wood around the corners or the sill means the frame has lost its strength, and no adjustment brings it back. On sound boards the usual failure is paint that has glued the opening leaf to the surround, so a unit that will not open after years of repainting often needs the edges freed before any hardware is touched. Fittings for timber differ from PVC hardware, so the right hinge is chosen for a wooden leaf.
Aluminium frames take a different seal and a different hinge set from plastic, and we carry both so a loggia or veranda unit is repaired on the same visit as a room one. We service units on plastic, wooden and metal frames, including small opening lights, loggia glazing and the glazed panels of gazebos and verandas. The metal is rigid and slim, which makes it popular for balconies and covered terraces, but its sealing strip and hinge set differ from PVC. Such frames react to temperature changes, so a leaf that sticks only on hot afternoons usually needs an adjustment rather than a new seal.
The path from an opening message to a finished repair follows the same steps every time, and every condition is known before anyone picks up a tool.
We reply on WhatsApp within five minutes and work seven days a week, so a visit can be booked for a weekday evening or a weekend morning. A short message describing the fault is enough to start a window repair Semey booking: which room, which sash, and what it does when you close it. The measurer then comes at a time that suits you, takes the sizes and looks at the frame on site. Weekend slots are the first to go, so a weekday visit is usually the quicker booking. Send a short video of the sticking sash with your opening message so the fitter knows what to prepare.
Measuring and consultation are free, the price is fixed in the order after measuring, and you pay after installation by cash, card or Kaspi. The measurer writes down what will be replaced — seal, fittings, hinges — and the order states the figure before any work begins. Nothing is charged for the visit itself, even if you decide to wait. Because the price is locked at the measuring stage, any extra part found mid-repair is agreed with you before it is fitted rather than added to the bill afterwards. Ask for that agreement in writing on the order sheet — it is the simplest protection against a surprise at the door.
Every repair carries a one-year warranty that covers both the labour and the parts we replaced, and the master checks the sash with you prior to leaving. The check runs with the unit shut: a hand along the closing edge, a look at the hinges, and a test of the handle through a full turn. If the sash still catches, it is adjusted on the spot rather than scheduled for another day. Run the same check yourself the next morning, when the flat is cool and a draught shows up most clearly — a fault caught in the opening weeks is settled under warranty without argument.
A repair visit often arrives together with a glass unit swap, a screen fix or a piece of safety hardware. Each job has its own timing, parts and checks, so we treat them as separate cases below.
A cracked or fogged glass unit can be made to size and swapped within one calendar day on an urgent order, and the replacement carries a three-year warranty. Our crew measures the rebate, the spacer and the sash, then the panel is assembled to those dimensions rather than pulled from a stock size. Urgent production and fitting run on that same one-day schedule with a surcharge on the panel itself, while a standard order runs on the usual schedule. Sealed panes, desiccant and the perimeter seal are renewed in the same pass, and the rebate is cleaned before the new panel goes in. A pane that has fogged between the layers will not clear on its own, so waiting through a winter only lets moisture spread and can stain the rebate before the swap.
We repair mosquito screens and replace their fixings, matching the fastener to the profile and the floor — Z-brackets, pins or magnets. The frame is repainted to any colour so it sits with the sash rather than against it, and a framed net cut to your size is ready in 10–15 minutes, a pleated one in 40–60 minutes. Mesh choice matters too: Ultravue passes 25% more light and air than other canvases, Pet Screen holds the weight of a small animal, and Poll-Tex anti-pollen net runs a 0.25×1 mm cell. A net that keeps blowing out is usually a fixing problem rather than a torn canvas, so check whether the frame still clips firmly before ordering a new one.
We fit child locks, restrictors and locks as part of the same visit, choosing the fitting to suit the handle and the sash rather than a single universal part. Locks and restrictors are picked after the handle type and opening direction are checked on site, since a mismatch here is the usual cause of a poor fit or a fitting that works loose over time. A restrictor that limits the sash to a ventilation gap is the safer choice for a child's room than a lock alone, because it keeps the sash usable for air without letting it open wide. Hardware is tested through a full open-and-close cycle before the crew leaves, so any adjustment is made while the fitter is still on site.
A window rarely fails without warning. The signs show up before the draught, the fogging or the sticking leaf becomes a real problem, and reading them correctly is what separates a small fix from a full replacement.
DIY repair, hardware, double glazing, technician visit
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionMinor issues can be fixed on your own: lubricate the hardware, tighten the pressure with an Allen key, clean and adjust the seal. If the sash has sagged, jammed, or draughts come through around the perimeter, it is better to call a technician.
If the sash catches on the frame, the handle turns stiffly, or the sash does not press evenly around the perimeter, the issue is with the hardware. The double glazing is at fault when condensation or moisture appears between the panes.
Such a unit is not repaired: the seal is broken, and moisture will remain between the panes. During window repair, it is replaced with a new one, and if urgent, within a day.
Yes, we also repair wooden windows: we adjust the sashes, replace the seal and hardware, and eliminate draughts. The scope of work depends on the condition of the specific window and its design.
Yes, we repair windows all year round, including during frosts: work on the sash and hardware is done without removing the frame. There is no need to go outside; the window stays in the opening.
Yes, we visit both private houses and apartments on any floor: we repair plastic, wooden, and aluminium windows. The technician works on site, and the frame does not need to be removed.
Yes, we work without days off, so you can order window repair in Semey on both Saturday and Sunday. Measuring and consultation are free; we agree on the visit time in advance.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp