
Good to know
Balcony and Loggia Glazing in Semey with Free Measuring
We handle balcony and loggia glazing in Semey as a direct contractor with our own installers. We offer cold and warm glazing, bring a free measuring visit, fix the price in the order after measuring, and take payment only after installation. Window installation carries a 5-year warranty.
Cold or Warm Balcony and Loggia Glazing and How to Match It to Your Balcony
Cold and warm glazing solve different problems rather than rank as better or worse; the right pick depends on how you intend to use the space and on local temperature swings.
What Cold and Warm Glazing Actually Differ In
Cold glazing pairs an aluminium profile with a single-chamber glass unit, while warm glazing combines a PVC profile with a double-chamber unit. The aluminium frame is slim and light, so it suits sliding sashes and large fixed panes without loading the slab. The PVC profile carries two sealed chambers and a wider thermal break, which slows heat loss and keeps the inner surface closer to room temperature. Both variants are made to the measured opening, so the difference lands in the frame material and the glass unit. Cold glazing covers wind and dust protection at a lighter weight for an unheated storage corner. Warm glazing earns its cost only when the space is used daily and the parapet and floor are insulated first.
Comparing the Two Options Side by Side
| Parameter | Cold glazing | Warm glazing |
|---|---|---|
| Profile | Aluminium | PVC |
| Glass unit | Single-chamber | Double-chamber |
| Best for | Storage, wind and dust protection | Daily use, insulated balcony |
| Condensation risk | Higher in winter | Lower with proper insulation |
| Opening type | Sliding or fixed | Hinged or sliding |
How the Free Measuring Visit for Balcony and Loggia Glazing Sets Sizes, Fixings and the Final Price
Measuring is not a formality — it is where the opening's exact dimensions, the fixing type and the final price come together, with nothing left to guesswork.
What the Measurer Checks and How the Price Is Fixed
- Timing that suits you: the measurer arrives when convenient, takes sizes and helps choose design, mesh and fixings.
- Free measuring and consultation: neither costs anything, so finding out what your glazing or loggia needs is risk-free.
- Price locked after measuring: the figure is fixed once sizes are taken, so you pay the agreed number.
- Every doubt raised: a wrong dimension cannot be corrected on site, so ask about the opening while the measurer is there.
- Fast replies: we answer on WhatsApp within five minutes, seven days a week.
- Colour matched: we paint the screen frame any colour to match your windows.
Choosing Fixings for Your Window Profile and Floor
The measurer picks the fixing to suit the window profile and floor, choosing between Z-shaped brackets, pins and magnets. Z-brackets grip the edge on standard PVC profiles, pins sit into pre-drilled holes on narrower sashes, and magnets hold a light assembly on smooth aluminium without drilling. On upper floors the fixing choice matters more than the frame, because wind load acts on the anchors, not the glass — a light magnet set fine on the first floor can fail on the ninth. Our measurer checks the profile type, floor and opening depth before deciding, covering plastic, wooden and aluminium windows, sashes and loggia openings.
What Balcony and Loggia Glazing Installation Covers and How Long It Takes
Installation runs from taking down old glazing to checking every leaf opens and closes. Here is what the work includes and how long each stage takes.
Step by Step from Demolition to the Finished Frame
We remove the old glazing, mount the new frames, set the leaves and check that everything opens and closes before we leave. The crew strips the old frames, clears the opening, then levels and fixes the new profile with anchors and foam before hanging the moving parts and adjusting the hardware. We handle balcony and loggia glazing in Semey as one full cycle, so you deal with a single team from the first cut to the final check. We reply on WhatsApp within 5 minutes and work seven days a week. Test every leaf yourself on installation day, because a small adjustment is easier on the spot than weeks later.
How Long the Work Takes and What Affects the Timing
Timing depends on the size of the opening, the number of movable sections and whether insulation and finishing are part of the same order. Timing depends on the size of the opening and the number of movable sections, and the exact schedule is confirmed after measuring. Adding insulation and finishing to the same order extends the schedule, yet it saves a second visit and a second round of cleanup. A larger opening takes longer to align, so plan the installation day around the full work. Booking the whole scope at once gets a finished result in one stretch instead of waiting between separate crews.
Insulation and Finishing After the Glazing Goes In
Glazing is only the first stage of a balcony upgrade. Insulation and finishing follow it, and the order matters if you want to avoid redoing work later.
Why Insulation Comes After the Glazing, Not Before
- New frames close the opening first: once glazing is mounted, the insulated contour has a fixed edge, not a bare bay.
- Insulation fills the remaining gaps: sealing goes into joints between frame and wall, sill line and corner posts.
- Doing it in reverse breaks the seal: insulating before frames are set leaves joints exposed and forces installers to cut insulation.
- One sequence, fewer returns: crews mount glazing, then seal and finish, so the opening is not opened twice.
- Slopes and sills follow the frame: interior finishing lines up with the new profile geometry, not an old opening.
Combining Glazing, Insulation and Finishing in One Order
We can take glazing, insulation and finishing as a single order, so the same team moves from one stage to the next without a gap between contractors. That matters on a loggia more than in a room: the glazed contour, the sealed joints and the lined slopes are one assembly, and splitting them across separate crews is where draughts and cold bridges usually appear. One order keeps responsibility in one place — if mould or a draught shows up months later, there is no argument over which stage caused it. Book the stages together and the unit is closed, sealed and lined in one run instead of three separate visits.
Condensation, Winter Care and Service After Installation
In winter a glazed balcony behaves differently depending on the glazing type and insulation. Below we cover where damp comes from and what service follows the work.
Why Condensation Appears and How to Reduce It
Condensation appears when warm moist air meets a chilled pane, and it is more common on cold glazing and at frame corners. Warm glazing uses a PVC profile and a double-chamber glass unit, so the inner pane stays closer to room temperature and collects less water. Single panes and thin aluminium frames cool down fast, and damp settles on them and in the joints. Frost marks at corners usually mean the frame or gasket is letting chilled air through, not that the glass is faulty. Ventilating the loggia for a few minutes a day removes more damp than wiping the pane, which only treats the symptom.
Winter Care and Service We Provide After the Work
- Window repair and adjustment: we repair and adjust windows after installation so sashes close evenly and draughts stop.
- Seal replacement: we replace the seal in windows of any brand, including KBE, Rehau, VEKA and Provedal.
- Glass unit replacement: a failed unit can be made and fitted urgently at a surcharge.
- Seasonal check: a hard gasket lets in draughts before the pane fails, so autumn checks save bigger repairs.
Warranty, Payment and How to Place the Order
Terms shape the decision, not paperwork after it. Below is what our warranty covers, how payment works and how a job is placed from first message to result.
What the Warranty Covers and for How Long
- Installation: five years on mounting work, covering joints, seals and sash fit in the opening.
- Glass unit replacement: three years on every unit we fit, from single pane to full glazed set.
- Repair: one year on labour and parts we replace, from handles and hinges to seals.
- Mosquito screens: one year on the fabric and frame we manufacture to your size.
- What you keep: the signed sheet with the fixed price is the warranty record.
Paying After Installation and Placing the Order
You pay after installation by cash, card or Kaspi, and we reply on WhatsApp within five minutes, seven days a week. Nothing is taken up front, and the sum stays fixed once measuring is done. To start, send your sizes or ask for a free measuring visit: the measurer comes at a convenient time, takes the sizes and helps choose the design, fabric and fixings. We are open seven days a week, so a question about a profile or fixing gets answered the same day. Settling up once the job is done means you check the sashes and finish first, and any issue is resolved before money changes hands.
How to choose a glazing contractor without overpaying
The path from picking a glazing type to the finished, insulated loggia follows a fixed order, and every stage builds on the figures and decisions taken before it.
- Two glazing types: lighter suits storage and wind protection; sealed supports living and heat retention.
- Free measuring: the visit locks dimensions, fasteners and final price before work begins.
- Installation scope: crew moves from demolition to checking each sash; timing grows with opening size and sash count.
- Finishing stage: insulation and trim follow frames; one order keeps responsibility in one pair of hands.
- Moisture and upkeep: ventilation plus tight seal limit damp; service covers repair, adjustment and glass unit replacement.

















Window replacement
Wooden window repair
Reveal finishing
Window insulation
Window adjustment