A technician holding a new rubber window seal in an office
from 1 000 ₸ per linear metreWe don't replace the window — we bring back its tightness: a new seal, adjustment and a 1-year warranty.Calculate

Window Seal Replacement in Semey

Flat · PVC

EPDM rubber seal

A new soft contour closes the gaps around the perimeter, and draughts and dust disappear from the room. From 1 000 ₸ per linear metre.

Technician holds a coil of black rubber window seal
GoogleYandex MapsZoon

5,097 reviews on review sites

What window seal replacement in Semey is

The sash and double glazing last a long time, but the rubber in the grooves wears out. Replacing it brings warmth and quiet back to the window.

In short

The seal sits in the grooves of the frame and sash and compresses when you turn the handle. While it stays soft, the window closes tight. Hardened, cracked or fallen-out rubber leaves a gap that lets in cold, noise and dust.

Hot summers and frosty winters in Semey age the rubber from both sides, so the contour here is replaced more often. The technician will match the seal to your window brand, replace it and adjust the sash pressure.

Hand fits a new black seal into the groove of a white sash
from 1 000 ₸

linear metre of new seal including labour

1 year

warranty on window repair and parts

5 minutes

how long to wait for a reply on WhatsApp

Window brands
KBEProvedalRehauVEKAOther

How seal fitting in Semey is performed

Check the window yourself before calling a technician.

A palm at the edge of a closed sash checks where the draft comes from
  • 01Hard rubber

    Press it with your finger: if the rubber doesn't give, it no longer seals the sash.

  • 02Cracks

    Cracks in the rubber at the corners of the sash grow and let cold air in during winter.

  • 03Fallen-out piece

    Rubber that has come out of its groove leaves a gap along the whole sash.

  • 04Draught

    Hold your palm by a closed sash and you'll feel a cold stream where the contour isn't holding.

Types of window seals for Semey homes

We match it to the room and the window: German rubber for a child's room, a between-frame layer for a kitchen by the road, a door contour for the balcony.

EPDM

standard PVC windows

Technician holds a coil of black rubber window seal

Flexible rubber for most profiles, holds its shape well.

from 1 000 ₸/linear m

German

child's room, bedroom

A craftsman holds a coil of grey rubber window seal in his hand

Doesn't crack from heat or frost, keeps its pressure longer.

from 1 200 ₸/linear m

Door

balcony door

A craftsman holds a strip of brush window seal with bristles in his hand

A durable contour for a door that is opened constantly.

from 5 000 ₸/item

Brush

aluminium sliding

A length of black self-adhesive window seal on a master's palm, white backing paper peeled back at the end

New pile closes the gap at the runners against dust and wind.

from 1 150 ₸/linear m

Between-frame

windows facing the road

A craftsman holds a thin strip of double-glazed window seal in his hand

A third layer of rubber reduces noise and removes the draught from below.

from 2 800 ₸/window

Window seal replacement prices in Semey

The price is calculated by the length of the contour and the type of rubber; the technician will give you the exact amount after inspection.

Type of workPrice
EPDM rubber sealsash or framefrom 1 000₸ per linear metre
German rubber seallasts longerfrom 1 200₸ per linear metre
Window turnkeyall sash contoursfrom 3 500₸ per window
Balcony door contourall the way roundfrom 5 000₸ per item
Brush sealfor aluminiumfrom 1 150₸ per linear metre
Rubber cleaning and lubricationif the rubber is still softfrom 750₸ per linear metre
Between-frame contoura quieter homefrom 2 800₸ per window
Draught-proofing around the perimeterwe close the gapsfrom 3 500₸ per sash
Sash adjustmentpressurefrom 3 000₸ per sash
Liquid plasticframe seamsfrom 1 500₸ per linear metre
Swedish-style timber insulationwooden windowsfrom 4 200₸ per linear metre

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi

Leave a request

Why customers order seal replacement in Semey from us

What every customer gets.

Warranty1 year

on work and new rubber

Profilesany

KBE, Rehau, VEKA, Provedal and others

Pricein the order

fixed after inspection

Paymentafter

the work: cash, card, Kaspi

Response5 minutes

on WhatsApp with a photo of the window

Scheduleno days off

we come on a day that suits you

Hours09:00–19:00

available daily

Experiencesince 2012

we work across Kazakhstan

How window seal replacement is carried out in Semey

From request to a warm window.

  1. A hand holds a phone with a dark screen near the edge of a white window
    015 minutes

    Request

    Message us on WhatsApp and send a photo of the window: where it's cracked, where the rubber has fallen out, where it's draughty.

  2. A tape measure lies along the bottom edge of the window opening, close-up view
    02at a convenient time

    Inspection

    The technician checks the contours, hardware and tightness, gives a price and agrees it with you.

  3. Hands holding a piece of new black window seal above a workbench with tools
    03one visit

    Replacement

    We remove the old rubber, clean the grooves and install the new one around the perimeter without joints or gaps.

  4. Finished white window in a bright room
    04in your presence

    Check

    We adjust the sash to the new contour, check for draughts, then you pay.

Good to know

Window Seal Replacement in Semey

We handle window seal replacement in Semey with our own fitters, not middlemen. We re-seal PVC windows and balcony doors of any profile, including KBE, Rehau, VEKA and Provedal. Measuring is free, the price is fixed in the order after measuring, and you pay only after installation, with a one-year warranty on labour and parts.

Signs That Your Window Seal Replacement Has Reached Its Limit

A closed window that still lets cold air in is the most common reason people call us. Before ordering anything, it helps to know whether the seal is worn or the leaf simply needs adjusting.

Five Signs the Seal Is Worn and Not the Hinge

  • Draught along the full perimeter: air creeps evenly around the edge, not from one spot, which points to a compressed contour seal.
  • Hard or cracked strip: the gasket has lost its spring and shows fine cracks where the leaf presses against the profile.
  • Condensation on the inner edge: water collects on the warm side and does not dry between the gasket and the profile.
  • Frost on the seal line in cold spells: ice forms in a thin band even in a heated room.
  • Whistling at the joints: air escapes at the corners and the impost, where the gasket compresses hardest.

Why Frost in the Corners Does Not Always Mean a New Seal

We check the whole contour before quoting, because frost in the corners can come from a cold glass unit, a thin profile or a missing seal at the impost rather than from the sash gasket alone. A single-chamber unit and an aluminium frame without a thermal break both pull the inner surface below the dew point, and no rubber strip fixes that. On the visit we run a hand along the leaf seal, the frame seal and the impost, then look at the unit edge and the profile width. When the gasket is fine but the glazing is the weak point, replacing it alone will not stop the frost — we tell you that on the spot instead of selling a service you do not need.

Matching the New Window Seal Replacement to Your Window Profile

A seal is not a universal strip. Its shape, hardness and cell structure have to match the groove in your profile and the way the sash presses against the frame.

Seal Types and Where Each One Fits

Seal materials compared by purpose and local weather
Seal typeBest forBehaviour in Semey climate
EPDM rubberOuter contour of sash and frameHolds elasticity through hard frost and summer heat
SiliconeSeals touching moving hardwareResists compression set, stays soft longer
TPEInner contours and light sashesCheaper, good for low-traffic windows

How We Pick a Seal for KBE, Rehau, VEKA and Provedal

We replace seals on glazing units of any manufacturer, including KBE, Rehau, VEKA and Provedal, and the fitter matches the strip to the exact groove of your profile rather than forcing a generic one. The measurer checks the groove depth and width, the gap between leaf and frame, and how the hardware sits before choosing a section, because a 1 mm difference in groove geometry changes which strip seats properly. On Provedal aluminium sliding units the contour runs along a thin rail, so we use a slimmer section there than on a deep PVC chamber in a Rehau or VEKA sash. A seal that is too thick stops the leaf closing flush and wears out the hardware, so the correct profile match matters more than the brand printed on the strip. Ask the fitter to show the old and new sections side by side before the sash goes back on.

How Window Seal Replacement Runs from First Message to Final Check

The visit is built so you know what happens at each step and what it costs before any work starts. Here is the sequence we follow on every job.

Free Measuring, Then a Fixed Price in the Order

Measuring and consultation are free: the measurer comes at a time that suits you, takes the sizes and helps choose the seal and fixings, and the price is fixed in the order after measuring. He notes the contour of your leaf and frame, the depth of the groove and the state of the existing gasket, so the replacement rubber matches the channel rather than being trimmed to fit on site. The same call covers the choice of material and the fasteners for your sash and floor. Because the fitter brings the right strip with him, you do not have to buy it yourself and guess the dimensions, which is where most do-it-yourself attempts go wrong.

What Happens on the Day of the Visit

  • Old gasket removal: the fitter pulls out the worn strip along the full contour and keeps a sample so the fresh one is matched exactly.
  • Groove cleaning: dust, hardened rubber and paint residue come out of the channel before anything goes in.
  • Seal fitting: the strip is pressed into the contour of leaf, frame and impost without stretching it around the corners.
  • Sash adjustment: the fitter adjusts the leaf so it closes evenly against the seal rather than compressing it on one side.
  • Press check: he checks the press along the whole perimeter and confirms the result with you before packing up.

Payment After Installation and How to Reach Us

You pay after installation by cash, card or Kaspi, we reply on WhatsApp within five minutes, and we work seven days a week. The first message is enough to book a measuring call: send a photo of the leaf and the worn gasket, and we will tell you which type fits your unit and what the window seal replacement semey visit will cover. If a glass unit also needs attention, urgent manufacture and replacement can be done within one day at a surcharge to the glass unit price. Paying only once the work is done and the press has been checked means the money follows the result, not the promise, which is the simplest protection a customer has.

Seal Service Life, Warranty and Checking the Work

How long a seal lasts depends on the material, the side of the building and how the unit is used. What you can rely on is the warranty and a clear way to check the result.

How Long a Seal Lasts and What the Warranty Covers

A quality EPDM seal on a well-adjusted unit typically serves several years, and every repair we do carries a one-year warranty on labour and replaced parts. EPDM keeps its elasticity across the temperature swings that hit the city hardest, from summer heat to deep winter frost, where cheaper rubber goes hard and cracks within a season. We change the seal on units from KBE, Rehau, VEKA and Provedal, so the profile brand is not a limit. The cover extends to the work and the parts we fitted, so if the press weakens within that year, the fix is on us rather than a new line on your bill.

How to Tell the Job Was Done Properly

  • Even press all round: close the leaf and feel along each side; resistance stays the same at the corners as in the middle.
  • Draught check: run a hand slowly along the perimeter on a windy day; no cool stream reaches your fingers.
  • Paper test: trap a sheet between leaf and frame and pull it out at several points; even resistance means no missed gap.
  • Easy locking: the handle turns without force, and the leaf sits flush rather than lifting at one corner.

Care, Seasonal Timing and Where to Order in Semey

A new seal lasts longer with a little upkeep, and the right timing saves you a second visit. This section covers both, plus the units and doors we can re-seal.

Simple Care That Keeps the Seal Supple

  • Wipe it down: run a damp cloth along the rubber a few times a year to lift dust that hardens the surface.
  • Skip the solvents: alcohol, acetone and abrasive cleaners dry the material out and leave it cracking within a season.
  • Silicone stick: work a silicone-based product into the rubber before the cold season so it stays soft and pliable.
  • Never force a frozen sash: warm the room first and ease the panel free, protecting both the strip and the hardware from tearing.

Which Units and Doors We Re-Seal Across the City

We re-seal PVC units, balcony doors and fixed lights in flats, houses and loggias across the city, and we can replace the gasket on a single leaf or on every opening in the flat. Our team also handles wooden and aluminium frames, vents and glazed loggia panels, so a mixed set gets done in one visit. We change the weather strip on any manufacturer's profile, from KBE and Rehau to VEKA and Provedal. When the draught comes from a leaf that no longer closes flush, adjusting it first is the cheaper route, and we say so if a new seal would not solve the problem on its own.

How to choose window seal replacement material for your window conditions

The points below summarise what decides a successful seal replacement, from spotting the fault to checking the finished work on site.

  • Diagnose before ordering: a draught along the whole perimeter, a hardened or cracked strip and frost on the inner frame edge point to a worn seal.
  • Match the strip to the groove: the seal has to fit the profile channel and the climate, and EPDM is the safe default for the outer contour in a cold city.
  • Follow the order of steps: free measuring comes first, the price is fixed in the order afterwards, and payment follows installation.
  • Ask for the baseline warranty: a one-year warranty on labour and replaced parts is the minimum to request, and the paper test checks the press.
  • Keep it supple: regular cleaning and a silicone care stick before winter keep a new seal flexible for years.

Questions about window seal replacement in Semey

Seal replacement, DIY repair, material choice, old windows

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can I replace the seals on plastic windows in Semey myself?

In theory yes, but without experience it is easy to install the seal crooked or in the wrong groove, and the window will start to draft. A technician selects the seal profile for your system and checks the fit after installation.

02Which seal will not crack within a couple of years on the sunny side?

For windows on the sunny side, EPDM is a better choice: it resists UV and temperature changes. Silicone also lasts long but costs more, so the choice depends on the window and budget.

03Can the seals on plastic windows be replaced without removing the window?

Yes, the seal is replaced on site: only the sash is removed from its hinges if that is easier for the technician, and the frame itself is not taken out of the opening. The work is done in the apartment and does not require dismantling the structure.

04Do you replace seals on old Soviet wooden windows or only on plastic ones?

We replace seals on wooden windows too, but first the condition of the frame and sashes needs to be assessed. If the structure is heavily worn, replacing the seal alone may not be enough — the technician will say during the inspection.

05How many hours does it take to replace the seals on all windows in an apartment?

The exact time depends on the number of sashes and the condition of the windows, so it is given after inspection. The technician will tell you how long one sash and the whole job will take after the inspection.

06What should I do if the window closes poorly after the seals are replaced?

First check if anything is obstructing the sash and if it sits evenly in the opening, and inform the technician. The cause is often misadjusted hardware — it is corrected, and the sash closes tightly again.

Reviews of window seal replacement in Semey

5,0based on 97 reviews on platforms
All reviews