Welded grille
Rods are welded into a rigid frame, the pattern is even and simple. Price from 7 500 ₸ per m², installation on the opening.


Welded grille
Rods are welded into a rigid frame, the pattern is even and simple. Price from 7 500 ₸ per m², installation on the opening.

Forged grille
Curlicues and hand-forged elements are added, the window looks more elegant. Price is calculated individually.

Hinged leaf
Part of the grille opens on hinges, the lock is inserted separately. Leaf from 15 000 ₸, lock from 5 000 ₸.

Removable grille
Held on anchors and removed when free access to the window is needed. Price is calculated individually.

Decorative
The pattern is cut by laser on metal, the shape is repeated precisely. Price from 25 000 ₸ per m².

5,097 reviews on review sites
A frame made of steel profile with rods inside: the pattern, spacing and coating determine the look and strength of the structure.
A grille is a rigid frame sized to the window opening with rods fixed inside. The pattern and rod spacing are chosen in advance, and the finished structure is attached to the wall or window frame from the outside.
A welded grille is assembled from straight rods and angle steel, a forged one — with curlicues and decorative elements. The domed one has a convex shape, the decorative one — a laser-cut pattern, the sliding one folds like an accordion.

price of a welded grille per m² according to the page price list
grille installation per m², mounting on the window
powder coating per m², metal protection
The mounting method depends on the wall material, the floor and whether free access to the window is needed.

The main option for the first floor and private houses: the grille is pulled to the opening with anchors and holds rigidly.
Part of the mesh is hinged so it can be opened for access to the window; a lock is cut into the leaf.
The structure is removed entirely when clear access to the glass is needed or during facade repairs.
If the grille is loose or bent, it is removed, straightened, welded and reinstalled; work from 6 000 ₸.
The table lists manufacturing by type, installation, painting and surcharges for individual elements.
| Type of item | Price |
|---|---|
| Standard welded grillestandard pattern | from 7 500₸ per m² |
| Forged grilledecorative elements | from 26 000₸ per m² |
| Domed (convex) grilleconvex shape | from 26 500₸ per m² |
| Decorative grillelaser cutting | from 25 000₸ per m² |
| Sliding accordion grillefolding design | from 28 000₸ per m² |
| Hinged grille leafsurcharge to the main structure | from 15 000₸ per leaf |
| Removable grille on anchorscan be removed when needed | from 16 500₸ per m² |
| Fire exit (hatch) in the grilleemergency hatch | from 15 000₸ per item |
| Lock insertion into the grillelock for the hinged leaf | from 5 000₸ per item |
| Powder coating of the grillecorrosion protection | from 5 500₸ per m² |
| Grille installationmounting on the window | from 4 500₸ per m² |
| Grille repair (welding, straightening)restoring the structure | from 6 000₸ per job |
| Removal of the old grilletaking down before replacement | from 4 000₸ per item |
Check the production time after measurement with the specialistThe price list includes surcharges for a hinged leaf and painting in a non-standard colorTo get an accurate quote, provide the width and height of the opening, the wall material and the desired pattern
Calculate by dimensionsFacts about production, timelines and order terms without intermediaries.
the price is fixed after measuring
for work and replaced components
we work without days off, accept requests via WhatsApp, respond within 5 minutes
we reply within 5 minutes
we paint white, brown, grey to match your windows
we deliver and install on windows and doors
you can order in 17 cities of Kazakhstan
payment after installation: cash, card or Kaspi
Four steps from request to the finished structure on the opening.

We take dimensions or a measurer visits: measures the width and height of the opening, clarifies the wall material.

According to the agreed pattern, the frame and rods are assembled, and if necessary painted with powder coating.

The structure is delivered and fixed to the opening with anchors; the hinged leaf is adjusted on hinges.

They check that the frame sits level along the opening, the hinges of the hinged leaf move freely, and the lock closes without effort.
Good to know
We make metal window grilles in Semey to the exact size of your window, balcony or door, with a free measuring visit and fitting by our own fitters. The measurer picks the fixing for your profile and floor, the frame is painted to match your windows, and you pay only after the grilles are up.
The choice rests on window type, floor level, and the job it must do — keeping intruders out, keeping children in, or blocking the street's view.
A welded unit is the workhorse for security, a forged one is chosen for looks, and a removable model lifts off from inside when needed. Welded sections fuse the bars into one rigid piece, so the assembly resists prying at the corners. Forged work is shaped and twisted into leaves, scrolls and geometric patterns — it protects, but the ornament is the point. A removable leaf hangs on hinges or drops into seats and comes away in seconds, which matters for cleaning, for an escape route and for repainting. Bar thickness is quoted in millimetres, yet on a first floor the fixing matters more than the gauge. For metal window grilles in Semey, the same three types cover both security and decoration.
We fit grilles to plastic, wooden and aluminium windows, plus balcony, gazebo and veranda openings, and paint the frame any colour to match your windows. A PVC profile takes anchors into its reinforcing steel, timber takes coach screws into the solid sash, and aluminium calls for rivets into the mullion rather than the thin outer wall. The measurer checks where the reinforcement runs before drilling, because a fixing in hollow plastic pulls out under load. Colour is matched at the painting stage, so the structure sits visually inside the opening. A structure matching the frame shade reads as part of the window, so the security you need does not turn the facade into a cage.
| Grille type | Best for | Look | Opens from inside |
|---|---|---|---|
| Welded | Ground-floor security | Simple bars | Fixed, needs a key or hinge option |
| Forged | Facade appearance | Decorative | Fixed |
| Removable | Cleaning and emergency exit | Simple bars | Yes, lifts off inside |
| Clear-view | Keeping the view | Fine bars, light | Fixed |
The fixing decides whether the structure stays put for years and the window still works. We look at the hardware, the sash and how a grille shares a window with a mosquito net.
Our measurer picks the fixing for your window profile and floor, choosing between Z-shaped brackets, pins (plungers) or magnets. Z-brackets hook onto the frame and carry the weight of a heavier welded section, pins sit into the profile on lighter removable panels, and magnets hold a slim inner frame that you lift off in seconds. The same unit can be fixed two ways, depending on how the sash opens and how high up you are. On upper floors we lean toward fixings that need no drilling through the sealed part of the profile, so the glass unit and its seal stay untouched. Tell the measurer if the window is on a balcony rail or a low first-floor opening — the load and the safety margin change the choice.
The structure is set so the sash still opens for cleaning and air, and it can share the same window with a mosquito net. We mount the frame on the outer plane of the profile and leave the swing of the sash clear, so the handle turns and the leaf opens inward as usual. A mosquito net then sits on its own fasteners inside or outside the grille, and the two do not fight for the same holes. If you want a way out in an emergency, say so at measuring — a removable or hinged section is planned into the frame, not added later. That section releases from inside in a moment, which matters on upper floors.
The order runs in clear steps: a measuring visit, making to your size, then delivery and fitting. Below is what happens at each stage and who handles it.
Measuring and consultation are free, and the measurer comes at a time that suits you, takes measurements and helps you choose the design, mesh and fixings. The specialist checks the window profile, the floor level and how the sash opens, then suggests Z-brackets, pins or magnets to match. He also brings the mesh options, so you can feel Ultravue, the standard fibreglass and the Anti-Cat canvas side by side before committing. Hand-taking at the window catches the reveal and sill quirks that a photo of a tape measure cannot, which is why a made-to-measure grille fits first time. Ask the measurer to note the frame colour on the order — we paint the frame any shade to match your windows.
We make the grilles to your size, deliver and install them on windows and doors, and our own fitters carry out the work rather than a middleman. A framed screen in your dimensions takes 10–15 minutes to assemble, so most orders move to fitting quickly once the numbers are confirmed. The same crew that arrives at your door also repairs screens and swaps worn fixings, which keeps one point of contact from the first call to the finished result. Payment follows completion — cash, card or Kaspi. If a bracket works loose later, the same team comes back to tighten or swap it, so the grille keeps its hold season after season.
The terms are straightforward: the figure is fixed once we have measured, payment follows the fitting, and we work every day of the week. Below is what each means in practice.
The amount is fixed in the order after measuring, and you pay after installation by cash, card or Kaspi. The measurer records the opening, the grille type, the fixings and the frame colour, and that written document becomes the sum you settle at the end. Nothing is charged at the visit itself, which is free, and no deposit is taken before the workshop starts. Painting the frame to match your windows is agreed at the same stage, so the finish you chose sits inside the locked figure rather than becoming a later extra. You see the full amount before any work starts, and it does not move once the order is signed.
We give a 1-year guarantee on mosquito screens, work seven days a week, and reply on WhatsApp within 5 minutes. The cover includes the screen and the labour of our fitters; window installation carries 5 years and glass unit replacement 3 years, while window repair is protected for 1 year on labour and replaced parts. Because the workshop and fitting team are ours, a claim goes to the people who built and hung the unit — no third party sits between you and the fix. Message us a photo of the problem and the order details, and we will tell you what happens next. Ask at measuring what the cover includes for your grille, so the paper matches the job.
A grille lasts for years with proper care, yet local winters damage painted steel. Here is the routine, what cold does, and what to do once rust appears.
We repair the bars and replace their fixings, so a unit that has rusted or come loose does not always need replacing. Our fitters check the frame, the welds and the anchors, treat corroded spots and fit new brackets where old ones have worked free. A rattling unit in the wind usually has worn mounts rather than a failed frame, and fresh brackets bring it back to a firm hold without touching the bars. We also repaint the structure to match the facade after a repair, and we work on the same windows we fit mosquito screens to, so one visit can cover both. Before the cold sets in, book an inspection rather than waiting for an anchor to pull out.
A unit that fits the window profile and the job it has to do stays useful for years, while a rushed choice shows up in the first season.
Installation, fixings, rust protection, design
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, a balcony unit can have a single shared frame or two separate grilles — one for the window and one for the door, with an opening leaf on the door section. The measurer checks how the leaves open and selects the fixings so nothing gets in the way.
For a panel building, anchors into the wall or installation into the ends of the opening are more reliable — they hold better than fixing to the window profile itself. The exact option depends on wall thickness and panel material, and the measurer selects it.
For children, a spacing of no more than ten centimetres is used so a child cannot put their head through, and smaller if desired. The exact spacing depends on the window and the grille pattern, and it is agreed at the measuring visit together with the position of the opening leaf.
The basis of protection is powder coating over prepared metal and regular inspection for chips. Small damages should be touched up immediately, and in winter and during rain it is useful to wipe the grille and not leave moisture in the welds.
Yes, we powder-coat the grille in white, brown, grey or another shade to match your windows and facade. To get the colour right, paint samples are compared with the profile in daylight at the measuring visit.
Check that the grille does not wobble, the leaf opens freely, and the lock (if present) works without sticking. It is also worth making sure the fixings are tightened and there are no gaps between the grille and the wall.
Yes, we make the grille to your dimensions and an agreed pattern, including non-standard openings. At the free measuring visit, the window is measured and the pattern is discussed so the finished structure fits exactly into place.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp