Opening stop
The sash won't open wider than the gap; an adult releases the stop with a button. Fitting from 2 150 ₸ per item.


Opening stop
The sash won't open wider than the gap; an adult releases the stop with a button. Fitting from 2 150 ₸ per item.

Comb
The window stays at the chosen notch while you cook. With installation from 1 050 ₸ per item.

Cable with lock
Only an employee with a key can open the window wider than the gap. From 2 500 ₸ per item.

Fixer
The sash doesn't slam and doesn't scare children during nap time. From 1 200 ₸ per item.

Handle with key
The handle won't turn without a key, and the window won't open at all. Price from 3 650 ₸ per item.

5,097 reviews on review sites
A small detail that prevents the window from opening wide and keeps the air flowing
The warm season in Taraz is long, and windows are kept open from spring to autumn. A limiter sets the limit: the sash reaches the stop and stays at a gap too narrow for a child or a cat to get through.
An adult removes the protection to wash the window or open it fully. For apartments, button stops and combs are used; for offices and kindergartens, cable locks and fixers.

comb with installation
measuring and selection
reply in WhatsApp
Four reasons people come to us

A child turns the handle as soon as they can reach it. The stop leaves only a narrow gap.
The window is open, but the wind swings it wide. The comb holds the sash.
The cat loves the windowsill in the children's room. It won't squeeze through a narrow gap.
In the office, windows are opened by staff with a key: we install a cable lock.
Price per sash; the total for an apartment or office will be given after measuring
| Type of item | Price |
|---|---|
| "Comb" window limiter with installationfor kitchen and bedroom | from 1 050₸ per item |
| Installation of opening limiterper sash | from 2 150₸ per item |
| Cable limiter with lockfor offices | from 2 500₸ per item |
| Opening limiter (product)product only | from 2 000₸ per item |
| Limiter replacementnew for old | from 1 200₸ per item |
| Penkid lock with cablecable and button | from 2 150₸ per item |
| Blocker for sliding windowsstopper | from 4 000₸ per item |
| Sash blockeragainst drafts | from 1 200₸ per item |
| Child window lock (surface-mounted, flag)flag type | from 3 250₸ per item |
| Installation of blocker or child lockfitting | from 2 750₸ per item |
| Window handle with keyfull locking | from 3 650₸ per item |
Price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi
Book a measuring visitOnly what we do
we work across Kazakhstan
on WhatsApp
we'll choose a model for your window
does not change after measuring
installation: cash, card, Kaspi
every day
plastic, wood, aluminium
cities of Kazakhstan
Four steps without hassle

Tell us how many windows and who needs protection. We'll reply and suggest a time for measuring.

The measurer checks the sashes, shows models and gives you the order total.

We install limiters and fixings, and check that the windows close tightly.

We show you how to remove the protection and hand over the keys. Payment after checking.
Good to know
We supply and fit window restrictors in Taraz on plastic, wooden and aluminium windows and balcony doors. Our measurer comes free at a time that suits you, picks the fixing for your profile and floor, and the price is fixed in the order after measuring. You pay after installation by cash, card or Kaspi.
A restrictor limits how far a sash opens, so a child cannot climb through the gap. A mosquito screen only keeps insects out and gives way under weight, so the two are never substitutes.
A window restrictor is a small device fixed between the frame and the sash that lets the opening move only a set distance, usually enough for ventilation but too narrow for a child to pass through. The body of the device screws to the frame, the arm or cable links to the moving leaf, and a stop holds it at that set gap. On tilt-and-turn units it also blocks the leaf from swinging wide in the turn position. Every opening sash needs its own restrictor — fixed panes have nothing to limit. Fit it on each sash a child can reach, not just the one by the sofa.
A mosquito screen is held by light frame clips and flexible mesh, so it keeps insects out but cannot carry the weight of a leaning child and pops out of its guides. The mesh is stretched fibreglass or polymer, the frame is thin aluminium, and the clips release for cleaning — none of that is load-bearing. A metal grille is different: rigid bars anchored into the wall or reveal, built to resist pressure. We fit screens and restrictors on the same opening, the screen outside and the restrictor on the sash, so both jobs get done in one visit. If a child can reach the glass, the screen is comfort, the restrictor is the safety line, and the grille is for ground-floor security.
The three devices solve different problems, and picking the wrong one wastes money. A restrictor controls how far the leaf opens, a blocker stops it opening, and a keyed fitting locks the handle.
A cable restrictor flexes and suits tilt-and-turn units that open two ways, while a folding arm holds a fixed angle and works best on a standard side-hung leaf. We fit both on plastic, wooden and aluminium frames, and the geometry decides the model before colour is discussed. The cable runs from frame to sash on a short steel tether, letting the panel tilt in for cleaning while capping the swing at a set gap. A folding arm is riveted at one angle, so the panel stops at the same point every time and cannot creep wider with use. The two look alike in a catalogue photo but behave differently the moment you turn the lever.
| Device | What it does | Best for |
|---|---|---|
| Window restrictor | Caps how far the sash opens | Child safety with ventilation |
| Window blocker | Stops the sash opening fully | Rooms left unattended |
| Handle with key | Locks the fitting itself | Extra control for adults |
| Grille | Bars the opening from outside | Ground floor and security |
The fixing holds the device to the frame; the wrong one loosens or marks the profile. Our measurer picks Z-brackets, pins or magnets based on your setup and flat height.
We match the hardware to the profile and floor using Z-shaped brackets, pins or plungers, or magnets, so the device holds firmly without weakening the frame. A Z-bracket wraps around the frame edge and spreads the pull across a wider area than a single screw, which suits standard PVC. Pins and plungers sit in the rebate and work on narrow profiles where a bracket has no room to sit flat. Magnets suit a light leaf you want to release without tools. Our measurer checks profile depth, glazing weight and the floor before fixing anything. A high floor and a wide leaf put more load on the hardware than a ground-floor unit.
Some hardware, such as magnets, holds without drilling into the PVC, while others need small screws into the profile, and the choice depends on leaf weight and how the unit is built. A magnetic catch relies on a steel plate bonded to the leaf and a matching plate on the frame, so the profile stays whole and the reinforcement inside it is untouched. Screwed brackets and pins put two or three short screws into the PVC, which is standard on a unit that is already installed. A no-drill option is easier to take off when you move out, but it carries less load, so on a heavy leaf the screwed bracket is safer long-term even though it leaves small holes.
The job starts with a free measure, moves to a fitting visit, and ends with payment once the device is on and working. Here is what happens at each step.
Our measurer comes at a time that suits you, takes the sizes, checks the profile and the floor, and helps you choose the device, the fixing and any screen to go with it, all free of charge. He notes whether the frame is PVC, wood or aluminium and confirms the floor so the right bracket, pin or magnet goes into the order. If a mosquito screen is going on the same opening, he sizes that at the same visit and matches the frame colour to your existing ones. The same visit also covers window restrictors in Taraz, so the measurer checks the opening and confirms the right fixing on the spot. Because the measure happens on the actual opening, the fitter sees how the leaf travels and the frame condition.
The fitter installs the device on the day agreed, the price is fixed in the order after measuring, and you pay after installation by cash, card or Kaspi. A framed screen made to your size takes 10 to 15 minutes, a pleated one 40 to 60 minutes, and the restrictor itself adds little to that visit. We reply on WhatsApp within 5 minutes and work seven days a week, so a slot is easy to book around your day. Fixing a restrictor is quick work, so the visit is short, but the fitter still adjusts the leaf first if it drags, because a device on a stiff panel wears out faster and stops holding the set gap.
A flat has more than one plastic unit, and a restrictor must work on balcony doors, wooden and aluminium frames, and through winter. This section covers less standard cases and post-fitting outcomes.
Restrictors on Balcony Doors and Non-Plastic Frames We fit restrictors on balcony doors, loggia sashes, and plastic, wooden and aluminium frames, and can add a mosquito screen to the same opening so one visit covers both. On timber sashes the fixing is chosen for the wood, while aluminium loggia frames often take a different bracket than a bedroom casement. A balcony door is heavier and used far more often than a casement, so hardware and fixing are picked for that extra load and daily swing. A folding arm rated for a light casement loosens within a season, while a cable model holds its set gap. When a screen and restrictor share an opening, the screen frame goes on first and the restrictor second, so the two never fight for the same screw line.
The restrictor stays on through winter, a lost key is replaced rather than forcing the leaf, and our repair work carries a one-year warranty on labour and replaced parts. Cold does not damage the fitting, but a casement that swells or drops in the frost can change the gap it holds, so the setting is worth checking once the heating comes on. A lost key or a bent arm is a small parts swap, not a reason to lever the leaf open and damage the profile. If the unit stops holding its gap, the usual cause is a dropped casement or a loose fixing, so the repair starts with the sash rather than the hardware. We check alignment before replacing anything, and an autumn check saves a January callout.
The right setup comes down to three things — the opening type, the frame profile and the floor level — and a proper survey settles all three well ahead of any order.
Installation without drilling, repair, child and pet protection
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionFor rented housing, people often choose a surface-mounted handle lock, while adhesive or strap-based restrictors hold less firmly than screw-fixed ones. Whether drilling is needed depends on the window and the model. The surveyor will suggest a suitable option during the free measuring visit.
Do not force the sash: loosen the fastener and check whether the bar or cable is bent. A damaged part is replaced, and if the window hardware itself is jammed, it is better to call a technician.
For pets, choose a cable version with a sheathed metal cable or a reinforced comb with rigid teeth. Plastic flags and light stops can be knocked out by a large dog, depending on the window and the animal's weight.
With careful use, the device lasts for years; most often the cable or plastic fastener wears out. A separate part can be replaced without changing the whole set if the model is dismountable.
At this age, children quickly learn to open the sash, so choose a cable with a lock or a keyed handle rather than a simple comb. It is important that the ventilation gap is narrow and the key is kept by adults.
A simple comb is sometimes installed by oneself, but when drilling the profile it is easy to make a mistake with the mounting point and damage the sash. During the free measuring visit, the technician will select a model and install it with a workmanship warranty.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp