Craftsman by a plastic window with double-glazed units in the studio living room
from 1 300 ₸The frame stays, we make a new unit to measure, and you pay only after installation.Calculate

Double Glazing Replacement in Taraz

Hot summer

With coating

The coating on the glass reflects some of the sun's heat, keeping the house cooler without extra air conditioning. From 15 200 ₸ per m².

White PVC window in a home office, a desk with a laptop and a lamp in the foreground
GoogleYandex MapsZoon

5,097 reviews on review sites

What double glazing replacement in Taraz includes

Only the glass in the sash is changed. The window is not removed, the finish is not touched, and you can choose a better unit right away.

What the work includes

The surveyor measures the glass along the glazing beads and checks the profile width. A new unit is made to these measurements, and the technician removes the glazing beads, takes out the old unit, fits the new one on setting blocks and adjusts the sash.

In Taraz summers are hot and dusty, and winters bring frost with wind. For windows on the sunny side we recommend coated glass, for windows by the road — a soundproof unit, for cold rooms — a triple-pane one.

Empty PVC window sash against the wall and removed glazing beads on the floor next to a balcony door
from 19 500 ₸

new unit per square metre

3 years

warranty on work and unit

1 day

urgent production and replacement with a surcharge

Types
CoatingSoundproofingTriple-paneDouble-paneTriplex

How glass replacement is performed in Taraz

Four main reasons to call.

A craftsman inserts a white glazing bead into the sash with a rubber mallet
  • 01Crack

    On the windy side glass cracks from sash slamming and temperature changes; we install a new unit.

  • 02Fog between panes

    If the glass is cloudy inside, the sealant lets moisture in, and such a unit cannot be restored.

  • 03Broken by a ball

    We make the unit urgently and install it within one day; a surcharge is added to the price.

  • 04Frost on glass

    We replace double-pane units in living rooms with triple-pane ones, and frost no longer appears.

Types of units for new glass in Taraz

Each option solves its own task: heat, noise, cold, or simply restores intact glass to the window.

With coating

sunny side

White PVC window in a home office, a desk with a laptop and a lamp in the foreground

Energy-saving glass lets in less heat and keeps warmth in winter.

from 15 200 ₸/m²

Soundproof

windows facing the road

White PVC window high above a busy avenue, a bookcase beside it

Panes of different thickness dampen traffic noise noticeably better than standard ones.

from 19 500 ₸/m²

Triple-pane

bedroom, children's room

White PVC window in winter, a snowy courtyard outside, a floor lamp and a small table beside it

Three panes and two chambers for cold winters and quiet rooms.

from 20 000 ₸/m²

Double-pane

veranda, loggia

White PVC window in a dining room, with an oak table and chairs next to it

A lightweight double-glazed unit for unheated spaces.

from 12 600 ₸/m²

Tinting

film on glass

A plastic window with tinted glass, houses and mountains visible through the glass

Blocks glare and protects furniture from fading.

from 5 500 ₸/m²

Double glazing replacement prices in Taraz

The price depends on the area and type of unit; we fix it in the order after measuring.

Type of workPrice
Double glazing replacement, per m²new unit to replace the old onefrom 19 500₸ per m²
Energy-saving double glazingfor the sunny sidefrom 15 200₸ per m²
Triple-pane double glazingthree panesfrom 20 000₸ per m²
Double-pane double glazingtwo panesfrom 12 600₸ per m²
Broken glass replacementsingle panefrom 8 000₸ per m²
Glass in a plastic doorbalcony, house terracefrom 22 000₸ per m²
Window film tintingsoftens the sunfrom 5 500₸ per m²
Security film on glassshards stay in placefrom 8 000₸ per m²
Additional glazing beads installationtight fixingfrom 1 300₸ per item
Sash adjustment with removalafter replacementfrom 4 000₸ per sash
Window inspection by a technicianwithout repairfrom 3 600₸ per job

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi

Book a measuring visit

Why customers order a new unit in Taraz from us

Terms that are the same for every order in Taraz.

Warranty3 years

on the new unit and technician's work

Urgent1 day

production and replacement of broken glass with a surcharge

Measuringfree

we measure the glass and advise on the unit

Pricefixed

after measuring we record the amount in the order

Paymentafter

installation: cash, card, Kaspi

WhatsApp5 minutes

usual response time to a window photo

We workwithout days off

we accept requests every day

Experiencesince 2012

we work across Kazakhstan

How double glazing replacement is carried out in Taraz

Four steps to new glass.

  1. A hand holds a phone with a dark screen by a plastic window for measuring
    01response in 5 minutes

    Request

    Send a photo of the window via WhatsApp and briefly describe the problem; we will reply and suggest a measuring time.

  2. A tape measure measures the sash opening of a white plastic window, only hands are visible
    02free

    Measuring

    The measurer measures the glass and profile and together with you selects a unit for your task.

  3. Hands assemble a glass unit from glass panes and an aluminum frame on a workbench
    03urgent — 1 day

    Production

    The unit is made to measure; if the glass is broken, we will make and install it within 1 day with a surcharge.

  4. A new glass unit is installed in a white plastic window sash, clean glass
    04payment after

    Replacement

    The technician removes the glazing beads, replaces the unit, adjusts the sash, and after checking you pay.

Good to know

Double Glazing Replacement in Taraz

We handle double glazing replacement in Taraz as a direct contractor with our own fitters. We replace the sealed unit inside your existing frame, measure for free, and back the new unit with a 3-year warranty. Urgent jobs can be made and fitted within one day, and you pay only after installation.

How to Tell Spent Double Glazing Replacement from a Worn Seal or Fitting

A fogged or draughty window does not automatically mean the sealed unit is finished. Three different faults produce similar symptoms, and telling them apart before ordering saves you from paying for work your window does not need.

Condensation Between the Panes Means the Unit Has Failed

Moisture, fog or frost trapped between the two panes is the one sign that always points to a failed glass pack, because the gap is sealed at the factory and no room air should reach it. Once that perimeter seal breaks, water vapour enters the cavity and condenses on the colder inner pane, and no amount of wiping or ventilation clears it. The fog may start as a thin band along one edge and spread across the whole pane over a season. A failed unit also loses its insulating gas fill, so the room feels colder near the glass even before the mist becomes obvious. Condensation on the room-side glass is a different problem — it usually means warm damp air meeting a cold surface, so check ventilation and the seal before blaming the glazing.

Draughts and Cold Spots Usually Come from the Seal or the Fittings

When a window lets in draughts but the pane itself stays clear, we usually find a flattened seal or a sash that has dropped out of adjustment rather than a dead glass pack. Rubber gaskets harden and compress over years of sun and frost, and a sash that has sagged on its hinges leaves a hairline gap along the top corner. In our practice the two faults look alike from inside the room, so the check starts at the gasket, not at the glass. A quick test is to run a hand along the seal on a windy day — a steady cold stream at the gasket points to the seal, while a gap at the top or bottom corner points to the hinge side needing adjustment. Replacing a gasket costs far less than a new glass pack, so confirm which fault you have before booking any replacement.

Double Glazing Replacement of the Unit and Keeping Your Frame

The frame and the fittings usually outlast the glass unit, so a full window swap is rarely needed. Below is what can be changed in place and which window types we take on.

What Can Be Replaced Without Touching the Frame

We replace only the glass pack and leave your frame, sashes and fittings in place, which keeps the job quick and avoids disturbing the wall around the window. The glazing beads come off, the spent panel lifts out, the rebate is cleaned and the new one is seated and re-beaded. The fresh panel is measured against the frame opening, not copied from the old pane being removed, because a frame can shift over the years and a piece cut to the previous size may not seat cleanly. That is why the free measuring visit matters more than any note you bring from an earlier order — it is the opening, not the pane, that sets the final dimensions.

Plastic, Wooden and Aluminium Windows We Work With

  • Plastic frames: the most common job, with clip-in beads that come off and refit cleanly.
  • Wooden frames: we check the bead and rebate before ordering so the new panel sits level.
  • Aluminium frames: thinner profiles need a glazed unit matched to the system depth.
  • Balcony doors and large panes: measured on site because weight and size affect handling.
  • Bead condition: cracked or swollen timber is flagged at measuring, not after the swap starts.

Choosing a Double Glazing Replacement Unit for Taraz Heat, Cold Snaps and Street Noise

Summers here are long and dry, and winter nights can drop fast, so the number of chambers and the type of glass decide how much warmth stays in, how much noise stays out and whether the inner pane fogs up.

One Chamber or Two for a Taraz Winter

A single-chamber build has two panes and one air gap, while a two-chamber build adds a third pane and a second gap, which holds warmth better when winter nights drop sharply. The extra cavity slows heat transfer, so the glass on the room side stays warmer and moisture is less likely to settle on it in the morning. A single-chamber build is lighter and cheaper to make, and on a glazed balcony or a window that rarely faces the wind it performs well enough. On a living-room wall that loses heat, the second gap is what keeps the inner surface above the dew point and stops the film of water that later turns into mould on the slopes. Choose by the room, not by the whole flat.

Glass Options for Sun, Noise and Heat Loss

Glass choices matched to the problem each one solves
What you want to fixGlass optionWhat it does
Winter heat lossLow-emissivity coatingReflects warmth back into the room
Street or traffic noiseLaminated or thicker glassDampens sound through the pane
Summer overheatingSolar-control coatingCuts the sun's heat gain
Everyday budget jobStandard clear glassBasic clear glass, no coating

How the Replacement Runs from Measuring to Handover

From your first message to a finished window, the work follows clear steps. Below is what happens at each stage and what the replacement covers.

The Free Measuring Visit and What the Measurer Checks

Measuring and consultation are free, and the measurer comes at a time that suits you, takes the sizes and helps choose the sealed pack, glazing and fixings. At the window, he records the width and height of the rebate rather than the old pane itself, since a spent glass pack can sit out of true by a few millimetres. The measurer also checks the frame for square and the bead for damage, because a twisted frame has to be noted before the pack is ordered or the new pane will not sit flat. On doors and balcony frames he confirms which fastenings the profile takes. If you are planning a double glazing replacement in Taraz, the same visit sets out exactly what the work will involve. Book the visit through WhatsApp and we reply within five minutes, seven days a week.

Demolition, Fitting and What the Fitters Check Before They Leave

The fitters remove the old pack, clean the rebate, set the new one on fresh setting blocks and refit the bead, then check the seal and the closing of the sash. Old sealant and grit come out of the rebate first, because trapped debris stops the new glass pack bedding down and lets draughts through within a season. Furniture near the window is covered before the old unit comes out, since a large pane is awkward to carry through a room and a chipped edge cannot be repaired once fitted. Before leaving, the fitters test the sash for smooth closing, run a hand along the seal for gaps and confirm the fastenings sit tight, and the glass unit replacement carries a three-year warranty.

Timing, Urgent Jobs, Warranty and Payment

Timing, urgent turnaround and payment terms are the questions we hear most often before an order is placed. Here are the answers in one place, so you know what to expect before the fitters arrive.

How Long the Job Takes and When a Same-Day Replacement Is Possible

A standard replacement is usually a short visit once the pack is on site, and urgent jobs can be made and fitted within one day for a surcharge on the unit. Most of the working time goes into making the sealed unit itself, not into the swap: removing the old pane and setting the new one into a sound frame takes a fraction of the visit. Same-day work depends on the pack size and glazing type being available, so a plain single-chamber pane is far easier to turn around fast than a coated or laminated one. If your window is streaming after a cold snap, tell us the approximate size and glass type when you call — that single detail decides whether the one-day slot is realistic or whether a made-to-order unit needs two or three days.

The 3-Year Warranty, Fixed Price and Paying After Installation

We give a 3-year warranty on the replacement, fix the price in the order after measuring, and you pay after installation by cash, card or Kaspi. The warranty covers the sealed pack we supplied and fitted, and it starts from the day the work is handed over, not from the day the order was placed. Payment is settled only once the new pane is in and you have checked it, so there is no deposit to chase and no balance to argue over afterwards. A fixed price after measuring protects you from surprises if the frame turns out to need small extras, because anything found on site is agreed before the work starts rather than added at the end. Ask for the warranty terms in writing on the order — that sheet is what you show if a pane ever fogs again.

When double glazing replacement solves the problem

A few checks decide whether a spent glazing panel, a worn seal or a tired fitting is behind the problem, and each case has its own sensible next step.

  • Diagnose first: fog between the panes means the sealed unit has failed, while draughts usually point to the seal or the fittings.
  • Keep the frame: the glass pack itself can be swapped on its own in plastic, wooden and aluminium windows.
  • Match the climate: two chambers and a coating help against cold snaps and condensation on the inner glass.
  • Plan the visit: free measuring comes first, and urgent jobs can be fitted within a single day.
  • Know the terms: a 3-year warranty on the replacement, a price fixed after measuring and payment once the work is done.

Questions about double glazing replacement in Taraz

Frame, materials, condensation, sound insulation

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can the double glazing be replaced in an old plastic window without touching the frame and sash?

Yes, double glazing replacement in Taraz is done without removing the frame and sash: the technician removes the glazing beads, takes out the old unit and installs a new one. The frame, hardware and reveals remain untouched, so the repair in the room is almost unnoticeable.

02Is double glazing replacement suitable for a wooden or aluminium window?

Yes, we replace double glazing not only in plastic but also in wooden and aluminium windows, including non-standard designs. The fixing method and glazing beads differ, so before work the technician inspects the window and selects the appropriate option.

03What to do if only one pane in the double glazing is cracked?

The whole double-glazed unit is replaced: one pane is not changed separately, because the sealed unit loses its properties once opened. The technician takes measurements and orders a new unit of the same make-up, or a warmer or quieter one if you need it.

04Which double glazing should be installed to prevent condensation on the glass in winter?

An energy-saving double glazing with a coating and a sealed spacer bar helps: the inner glass stays warmer and moisture settles less. But if the room has poor ventilation or high humidity, condensation may appear even on a good unit.

05How many layers are needed in double glazing for sound insulation from the street?

For quietness, a double-chamber unit with different glass thicknesses and an increased air gap is often chosen: this dampens more street noise. The specific formula depends on the window and noise level, and the free measuring visit technician selects it on site.

06Can a broken double glazing in Taraz be replaced within a day?

Yes, an urgent option is possible: a new unit is made and installed within a day, but such work carries a surcharge on the unit price. If waiting a day is not critical, the technician will state the standard production time after measuring — it depends on the dimensions and formula.

Reviews of double glazing replacement in Taraz

5,0based on 97 reviews on platforms
All reviews