Craftsman adjusting a plastic window handle in the bedroom
from 3,000 ₸ per jobSash adjustment in one visit; double glazing unit replacement within a day when urgent.Calculate

Window Repair in Taraz

Pressure and hinges · adjustment

Sash adjustment

Simple sash adjustment from 3,000 ₸ per sash, complex with removal from 4,000 ₸.

A craftsman holds an L-shaped steel hex key for adjusting hinges
GoogleYandex MapsZoon

5,097 reviews on review sites

What window repair in Taraz is and when it is needed

Restoring the pressure, hardware and seal without replacing the window, when the profile and frame are intact.

How the service works

Window repair is the restoration of the sash and its seal: hardware adjustment, replacement of handles and hinges, seal replacement and, if needed, the double glazing unit. The profile and frame stay in place, and only worn parts are changed.

The warranty on window repair is 1 year on work and replaced parts. Double glazing unit replacement comes with a 3-year warranty and window installation with a 5-year warranty. Urgent manufacturing and replacement of a double glazing unit is possible within one day, with a surcharge on the unit price.

Technician in a dark blue T-shirt with a hex key at an open white PVC window sash
1 year

warranty on window repairs and replaced parts

3 years

warranty on double glazing unit replacement

5 years

warranty on window installation

One day
AdjustmentSealDouble glazing unitHandleHinges

How the technician restores windows in your flat

Four steps from inspecting the sash to checking the pressure around the whole perimeter.

Close-up of an L-shaped hex key in the trunnion on the edge of an open white PVC window sash
  • 01Inspection and diagnostics

    The technician checks the sash and frame for misalignment, and also the handle, locking pins and the condition of the seal.

  • 02Hardware adjustment

    Sets the pressure with the eccentrics and the sash position with the hinges so that it moves without catching.

  • 03Seal and handle replacement

    Replaces the worn sealing strip and broken handle with ones that match in fitting dimensions.

  • 04Cleaning up and handing over the workplace

    The technician clears away shavings and old parts, shows you the removed components and explains what was replaced and why.

Types of sash and hardware faults we fix

Five common faults that bring customers to call a technician, with signs and fixes.

Draft under the sash

Pressure and seal

Technician holds a roll of grey rubber seal, showing it for replacement

Adjusting the pressure and replacing the seal restores the contact around the perimeter.

Window won't close

Hardware and pins

A craftsman holds an L-shaped steel hex key for adjusting hinges

Adjusting the hardware stops the sash from catching and the handle from sticking.

Sash has dropped

Hinges and misalignment

A craftsman holds a small square double-glazed unit sample for replacement

Adjusting the hinges brings the sash back into the frame geometry without catching.

Handle broken

Handle replacement

A craftsman holds a new white plastic window handle for replacement

We replace the handle with a compatible one in terms of mounting dimensions and locking type.

Why does the reveal still sweat after window repair

Ventilation and reveal insulation

A craftsman holds a roll of gray mosquito netting for repair

Check the ventilation mode and reveal insulation — this is a separate job that reduces moisture on the frame.

Window repair prices in Taraz

Works and components with units of measurement; the final price is fixed in the order after measuring.

Type of workPrice
Technician visit and inspectionwithout ordering a repairfrom 3 600₸ per job
Simple sash adjustmentfrom 3 000₸ per sash
Complex sash adjustment with removalfrom 4 000₸ per sash
Window handle replacementfrom 2 750₸ per pc
Hinge replacementfrom 4 750₸ per pc
Hardware repairfrom 7 800₸ per job
Sash hardware replacementfrom 10 000₸ per sash
Seal replacementfrom 1 000₸ per linear m
Double glazing unit replacementfrom 19 500₸ per m²
Broken glass replacementfrom 8 000₸ per m²
PVC window sill installationfrom 5 500₸ per linear m
Sill flashing installationfrom 3 250₸ per linear m
Mosquito screen repairfrom 2 500₸ per pc
Supply vent installationfrom 6 000₸ per pc

The price is fixed in the order after measuring.Measuring and consultation are free.Payment after installation: cash, card or Kaspi.

Ask about repair cost

Why customers order window restoration from us in Taraz

Facts about warranty, timelines, payment and service geography.

Warranty on repair1 year

for works and replaced components

Warranty on double glazing3 years

for double glazing replacement

Warranty on installation5 years

for window installation

PaymentAfter

cash, card or Kaspi

ScheduleNo days off

we work daily

Geography17 cities

of Kazakhstan, including Taraz

ProfilesKBE, Rehau, VEKA, Provedal

and other systems — we replace seals in windows from various manufacturers

Reply in WhatsApp5 minutes

to a message during working hours

How window fixing is carried out in Taraz

From request to checking the result together with the master.

  1. A hand holds a smartphone with a dark screen near a white PVC window
    015 minutes

    Request

    Describe the problem in WhatsApp — we will reply within 5 minutes and agree on a convenient time.

  2. A tape measure measures the lower edge of the window opening of a white PVC window
    02Before work starts

    Agreeing the scope of work

    The master lists what will be included in the order (adjustment, handle, seal, double glazing), and you confirm the list before work begins.

  3. A removed white window sash on a workbench next to a coil of new black seal
    03On the day of visit

    Works

    The master performs adjustment, replacement of components or double glazing on site.

  4. A finished white PVC window with a new seal and handle, the sash closed evenly
    04Immediately

    Check

    Together we check the seal around the perimeter and the sash operation for opening and closing.

Good to know

Window Repair in Taraz and Our Own Crews

We handle window repair in Taraz with our own crews, not through middlemen. We adjust hardware, replace seals on any profile, swap glass units and stop draughts on plastic, wooden and aluminium windows. Measuring is free, you pay after installation, and repair work carries a 1-year warranty.

Why Your Window Needs Window Repair When It Draughts, Sticks or Fogs Up

A window rarely fails without warning — first comes a symptom. Here are the four signals residents of Taraz report most often and what sits behind each, so you can describe the fault to a master clearly.

A Draught Through a Closed Sash

A draught with the sash shut almost always means the seal has flattened or the leaf no longer presses evenly against the frame, so air slips through a gap you cannot see. The gasket is a rubber loop running the whole perimeter, and after years of summer heat and winter cold it loses its spring and stops filling the gap. The second suspect is the pressure point: the hardware that pulls the leaf tight has drifted out of setting, leaving one side loose while the other still grips. A third, rarer cause is a frame that has shifted in the opening after settlement. Run a hand along the seal on a windy day and note where it feels coldest — that spot tells the master which side needs adjusting before any part is ordered.

A Sash That Sags or Catches the Frame

A sagging leaf is a geometry problem, not a broken unit — the hinges have shifted under weight and the corner starts scraping the frame as it closes. Glass is heavy, and the lower hinge carries most of that load; over time its fixing works loose and the whole unit drops a few millimetres out of square. The first sign is usually a light scrape at the bottom corner or a handle that needs a push to latch. On larger leaves the drift shows faster than on narrow ones because there is more weight on the same two hinges. Do not force a catching leaf shut; each forced close wears the hinge and the frame corner further, and an adjustment early costs far less than a hinge replacement later.

Condensation, Ice and a Handle That Will Not Turn

Condensation on the pane usually points to a failed glass unit or a room with poor ventilation, while a handle that spins or a lock that will not catch is a hardware fault, not a glass one. Moisture trapped inside the sealed cavity means the edge seal has given way and the desiccant is saturated — no amount of wiping will clear it, and the whole glazed pack has to be replaced. Water on the room side is a different story: warm damp air meeting a cold pane, common in kitchens and bathrooms where extraction is weak. A spinning handle is a stripped spindle or a broken gearbox inside the lock. Before calling about fogging, check whether the moisture sits between the panes or on the room side — inside the unit means the seal has failed and the glass needs replacing, room side means air the room cannot clear.

Window Repair or Replacement and How to Decide Without Guesswork

Replacing a window is the expensive answer, and often not the needed one. Below is the simple logic a fitter uses: whether adjustment will do, whether a new glass unit is enough, or whether the profile has run its course.

When Adjustment and a New Seal Are Enough

We repair rather than replace when the frame is sound and the fault sits in the moving parts — a sash that drags, a gasket that has gone flat, a handle that no longer locks. Hardware and hinges carry the daily load, so they wear first: the sash drops on its pivots, the locking points stop meeting the strike plates, and the rubber strip flattens until draught gets through. Adjusting the fittings restores the clamp and the sash travel, and a fresh gasket closes the gap along the opening. A profile that is still square and dry will outlast several rounds of hardware and seal work, so spending on adjustment first is the cheaper path unless the profile itself is cracked or rotten. Ask the fitter to check the corners before quoting parts — if the profile is straight and dry, adjustment is the honest fix.

When Only the Glass Unit Needs Replacing

A fogged or cracked glass unit can be swapped on its own without touching the frame, and we can make and fit a replacement within a single day when it is urgent. The sealed pack is a separate component held in the sash by glazing beads, so the profile, hinges and handle all stay in place while only the glass goes. A pane that has misted between the panes will not clear on its own, and waiting lets the failed edge seal pull moisture further into the spacer, so the sooner it is measured the better the fit of the new one. Note the pattern of the fog — a white haze at one corner usually means the edge has failed there, while mist across the whole pane points to a wider breach. Either way, the measurement is taken on site, not guessed from the old pane.

When the Frame Itself Has Had It

A cracked, warped or rotten profile is the point where repair stops making sense, because new hardware and gaskets cannot restore a structure that no longer holds its shape or keeps water out. Once the geometry is gone, the sash no longer meets the opening evenly along its length, and every adjustment you make simply moves the gap from one corner to another. Look at the corners and the sill line first — a hairline split at a welded joint or soft, darkened wood near the sill is the tell that a replacement quote is the honest answer, not a repair. Water tracking behind the reveal and damp patches on the plaster below the sill point the same way. When that is what you find, put the money into a new unit rather than into parts for a structure that cannot hold them.

The Window Repair Jobs We Take On and What Each One Fixes

A direct contractor handles far more than a new handle. Here are the main jobs we carry out and exactly what each one puts right.

Adjustment, Seals and Hardware

We adjust the press and geometry of the sash, replace the seal around the whole contour and swap worn hinges and handles, and we fit seals to units of any maker, including KBE, Rehau, VEKA and Provedal profiles. A sash that no longer pulls evenly against the frame usually needs the hinges reset rather than replaced, while a lever that spins or refuses to lock points to the lock mechanism itself. A seal that has hardened and gone flat at the corners is the usual cause of a draught that adjustment alone will not cure, so the two jobs are best done together. For window repair in Taraz, this is the work we start with most often, since a reset sash and a fresh seal solve the majority of everyday faults.

Glass Units, Insulation and Draughts

We replace glass units, insulate the opening and close off draughts along the frame and under the sash, and an urgent unit can be made and fitted within one day. Mist or condensation trapped between the panes means the sealed cavity has failed, and no amount of wiping will clear it — only a new unit restores the view and the thermal barrier. Insulation covers the fitting line where the frame meets the wall, the gaps under the sash and the reveal around the opening, using foam, tape and sealant matched to the surface. Insulation pays off most after a draught check, because sealing a unit that still leaks at the sash just traps cold air inside the profile.

Which Job Fits Which Fault

common faults matched to repair work
What you noticeLikely causeJob that fixes it
Draught at the sash edgeFlat or hardened sealSeal replacement and press adjustment
Sash scrapes the frameShifted hingesHardware adjustment
Mist between the panesFailed glass unit sealGlass unit replacement
Cold along the frameGaps at the fitting lineInsulation and draught sealing
Handle spins or will not lockWorn handle or lockHardware replacement

Plastic, Wooden and Aluminium Windows We Take On

The repair depends not only on the fault but on what the unit is made of. Here is the range we work with, and how the approach differs between them.

Plastic Units and the Profiles Behind Them

Plastic units are the bulk of what we repair, and because we fit seals to any maker, a KBE, Rehau, VEKA or Provedal unit is no obstacle to a proper fix. Most faults on these sit in the hardware and the rubber rather than the frame itself: a tired gasket lets draughts through, a worn hinge stops the leaf sitting square, and a mis-set handle fails to pull it tight. Our crews carry gaskets for the common profile systems and match the rubber to the groove, then adjust the hinges and the strike plate so the sash closes on an even gap all round.

Wooden Frames and Older Homes

Wooden frames are repairable too, and the deciding factor is whether the timber is still solid — a dry, sound frame can take new seals and hardware, while soft or split wood needs more than a repair. On older units the wear shows up in different places than on plastic: hinges work loose from the wood, the sash drops and catches, and the gasket line flattens until the closing gap stops holding air. A sound carcass responds well to fresh rubber, re-set hinges and a clean-up of the closing edge. On older wooden frames, check the bottom rail and the sill joint first, since that is where water sits longest and where rot starts before it shows anywhere else.

Aluminium, Balconies, Loggias and Gazebos

We also repair aluminium units on balconies, loggias, gazebos and verandas, where the same faults show up but access and fixings differ from a flat unit. Aluminium profiles are slimmer and often sit on a cold or open build, so the seal and the hardware carry more of the load than on a thick plastic unit. Our crews work on plastic, wooden and aluminium alike, including the sashes on loggias and the glazing of gazebos and verandas, and pick the fastening and gasket to suit how exposed the opening is. On a balcony or gazebo the frame often moves more with temperature than an indoor unit, so fixings and seals there are chosen with that movement in mind rather than copied from the flat.

How a Window Repair Visit Runs from First Message to Final Check

A window repair is a short chain of steps when the contractor is direct. Here is how the job runs from your first message to the final check, so nothing catches you off guard along the way.

From Your Message to a Booked Visit

We reply on WhatsApp within five minutes, agree a convenient time for the measurer and work seven days a week, so the appointment can usually be booked for the day that suits you. A short message with the address, the number of opening leaves and a photo of the faulty window is enough to start — the master sees the profile and the hardware and plans the trip around them. Fixings, seals and handles for common profiles travel with the crew, so a straightforward adjustment or a seal swap is often closed in one call. Describing the symptom and sending a photo in the first message lets the master bring the likely parts, which often turns a two-trip job into one.

Free Measuring and a Fixed Price

Measuring and consultation are free, the measurer takes the sizes and helps choose the fixings and parts, and the price is fixed in the order after measuring so it does not move later. The measurer checks the profile, the sash geometry and the condition of the sealing strip, then explains which option fits the fault — an adjustment, a fresh seal or a replacement glass unit — and what each one involves. Fixings are matched to the profile and the floor, from Z-brackets to pins or magnets, so the repair holds where the wind actually hits. This appointment is also where the decision between adjustment, new weatherstripping and a glass unit is settled, so it is worth being there to ask what each option involves before anything is ordered.

The Repair, the Check and Paying After Installation

The master carries out the repair, checks the sash closes and locks cleanly and the draught is gone, and you pay after installation by cash, card or Kaspi. Adjustment, a replacement seal or a swapped glass unit happens on site, and the crew clears the old parts and the shavings before leaving. The check is the part worth watching closely: the sash should press evenly along the whole frame, the handle should turn without force and the lock should catch on the first try. Ask the master to open and close the sash in front of you and run a hand along the sealing line before signing off, because a press that feels right indoors can still leak once the wind picks up.

Warranty, Timing and Choosing a Direct Contractor in Taraz

Warranty and timing are where a direct contractor and a middleman part ways. Below is what our cover on window repair includes, how quickly a job can be done, and how to tell your own crews from a resold request.

What the Warranty Covers and for How Long

Repair work carries a one-year warranty covering both the labour and the parts we replaced, a replaced glass unit is covered for three years, and installation for five. The terms are split by job type on purpose: a seal or a handle swapped during a repair and a full glazing swap fail in different ways, so they get different cover periods. Our crews record exactly which parts went into your opening, and the fixed price agreed after measuring stays the same on any follow-up visit within the cover. Keep the order that lists the parts fitted, because a claim is settled against what was actually replaced, and a clear record makes the follow-up visit straightforward.

How Fast a Repair Can Happen

Most repairs are done in a single visit, and an urgent glass unit can be made and fitted within one day, which matters when a cracked pane is letting the cold in. Adjustment, a new seal or a handle swap usually takes part of a visit, while a made-to-size pane needs time at the workshop before it goes back into the frame. Urgent manufacturing carries a surcharge on the replacement itself, and that option is worth confirming when you book rather than after the crew has arrived. A same-day swap is worth asking about as soon as a pane cracks, since a temporary patch holds heat poorly and the longer the gap stays open the more the surrounding frame is exposed.

Telling a Direct Contractor from a Middleman

A direct contractor sends its own crews and can name the parts and the guarantee up front, while a middleman passes your request to someone else and rarely controls either the timing or the cover. The difference shows in small things: who measures your frames, who answers when a seal fails a month later, and whether the person quoting can describe the profile and the fittings being used. A contractor with its own workshop and crews fits screens and repairs frames across the city and in nearby towns, so the same people who quote the job also carry it out. Ask who will actually do the work and whether the price is fixed after measuring — a middleman tends to answer vaguely on both, because the crew and the final figure are not theirs to promise.

What to check before window repair

A quick recap of the signals, the repair-or-replace call and the questions worth asking, so the next step is a clear one.

  • Read the symptom first: a draught, a sagging sash, mist between the panes and a spinning handle each point to a different job.
  • Repair usually wins while the frame is sound and dry: a cracked or rotten frame is where replacement becomes the honest answer.
  • A glass unit can be swapped on its own: an urgent one can be made and fitted within a day.
  • Ask who will actually do the work: a price fixed after measuring separates a direct crew from a middleman.
  • Check what the warranty covers and for how long: a follow-up visit should be a right, not a favour.

Questions about window repair in Taraz

Hardware, repair types, seals, visit terms

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can just the handle or hinge be replaced on a window without touching the entire hardware?

Yes, usually it is enough to replace only the worn part — the handle or hinge — without changing all the hardware. The technician will select a compatible part and install it on site, without replacing the whole window.

02Can a window be repaired without replacing it entirely?

Yes, in most cases repair is possible without replacing the window: sashes are adjusted, seals, handles, hinges or double glazing are replaced. A full replacement is needed only if the profile or sash is seriously damaged.

03What is the difference between repairing a wooden window and a plastic one?

Wooden windows more often require woodwork: sanding, painting, replacing glazing beads and seals, while plastic windows require hardware adjustment and replacement of components. The technician selects the technology and materials for the window material.

04Which seal will withstand frost and summer heat?

For a sharply continental climate, a frost-resistant seal with UV protection is used: it does not stiffen in the cold and does not crack in the sun. The specific brand is selected for your window profile.

05Do you repair windows in homes with wooden frames?

Yes, we repair wooden windows on site, including sanding, painting, and replacement of glazing beads and seals. The technician arrives with their own tools and agrees the scope of work before starting.

06Is it true that dust and wind in Taraz wear out windows faster?

Dust clogs hinges and pressure points, and wind with sand accelerates seal wear. Therefore, it is useful to clean windows and lubricate hardware here more often than in a mild climate.

Reviews of window repair in Taraz

5,0based on 97 reviews on platforms
All reviews