EPDM seal
The flexible seal restores the sash's tightness, and dusty wind no longer gets into the room. From 1,000 ₸ per linear m.


EPDM seal
The flexible seal restores the sash's tightness, and dusty wind no longer gets into the room. From 1,000 ₸ per linear m.

German
German rubber copes better with summer heat and winter cold and suits a bedroom. From 1,200 ₸ per linear m.

Door frame
The balcony door seal wears out fastest in the home. Replacement around the perimeter from 5,000 ₸ per pc.

Brush
Worn pile on aluminum windows lets dust in. A new brush is from 1,150 ₸ per linear m.

Interframe
An extra seal between the sash and frame dampens avenue noise. From 2,800 ₸ per window.

5,097 reviews on review sites
The window is closed, yet noise and dust still get through? Then the rubber in the grooves has stopped working.
The seal in the grooves of the sash and frame is compressed when the window closes and blocks the gap. Over time the rubber hardens, cracks in the corners and comes out of the groove. Dust, noise and drafts get into the room through these places.
Hot summers and windy days in Taraz wear out the seal faster, especially on the sunny side. The technician will choose rubber to suit your window brand, replace it and set the sash pressure.

linear meter of new seal including labor
warranty on work and parts
reply to a request on WhatsApp
Check your windows in a couple of minutes.

If the rubber does not spring back under your finger, the sash is no longer pressing tightly.
Cracks at the bends of the seal eventually turn into gaps.
A section without rubber leaves a gap that lets in dust and wind.
On a windy day you can feel moving air by the closed sash.
For the sunny side, German rubber; for windows onto the avenue, an interframe layer; for sliding frames, a brush.
standard PVC windows

A flexible seal for most profiles that keeps its shape in the heat.
sunny side

Dries more slowly and keeps a tight seal longer.
balcony door

Durable rubber for a door that is opened all the time.
aluminum sliding

New pile closes the gap at the tracks against dust.
windows onto the avenue

A third seal dampens noise and blocks the draft from below.
The price depends on the perimeter of the sashes and the type of seal; the technician will give you a quote before starting work.
| Type of work | Price |
|---|---|
| EPDM seal, per metersash or frame | from 1 000₸ per linear m |
| German sealages more slowly | from 1 200₸ per linear m |
| All window sealsfull set | from 3 500₸ per window |
| Balcony door sealaround the perimeter | from 5 000₸ per pc |
| Brush for aluminumsliding frames | from 1 150₸ per linear m |
| Cleaning and lubricationextends the service life | from 750₸ per linear m |
| Interframe sealplus one seal | from 2 800₸ per window |
| We remove draftsaround the whole perimeter | from 3 500₸ per sash |
| Sash adjustmentpressure against the seal | from 3 000₸ per sash |
| Liquid plastic for jointsframe joints | from 1 500₸ per linear m |
| Wooden window insulationSwedish technology | from 4 200₸ per linear m |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi
Book a technicianA quick look at how we work.
on work and new seals
KBE, Rehau, VEKA, Provedal and others
fixed after inspection
the work: cash, card, Kaspi
on WhatsApp from a photo
we visit every day
time for accepting requests
we work across Kazakhstan
Everything in one technician visit.

Send a photo of the window on WhatsApp and describe the issue: noise, dust, draught, or a seal that has come out.

The technician checks all contours and the sash pressure, identifies the profile and gives a price before starting work.

We remove the old seal, clean dust from the grooves, and install a new seal around the perimeter in one piece.

We adjust the sash, check the window for draughts, and only then do you pay.
Good to know
We handle window seal replacement in Taraz with our own technicians, a free measuring visit and a 1-year warranty on window repair, covering labour and replaced parts. We re-seal windows of any brand, including KBE, Rehau, VEKA and Provedal, and you pay only after the work is done.
A closed window that still lets cold air in usually points to one of three things — a worn seal, a loose press, or a gap in the mounting seam. Here is how to tell them apart.
If the seal is still soft but the sash sits loose against the frame, the fix is a press adjustment rather than new rubber, and our technician checks both in the same visit. We look at the hardware first: the eccentric cams, hinge alignment and locking points, because a unit that has dropped a few millimetres stops pressing the gasket evenly along the whole perimeter. Window seal replacement in Taraz only solves the draft when the rubber itself has gone hard — otherwise the new strip compresses unevenly and cold air returns within weeks. In our practice the two problems often overlap: a worn seal on one side and a loose press on the other, which is why one visit covering both is faster than two separate calls. Ask the technician to show you the cam position before and after adjustment, so you can check the clamping yourself when seasons change.
Taraz swings between hot, dry summers and cold winters, and that range is hard on window sealing. The option you choose decides how long the fresh strip stays soft and how well it holds its shape.
| Material | Best for | Weak spot | Typical service life |
|---|---|---|---|
| EPDM | Mixed climate, temperature swings | Hardens in constant direct sun | Even, steady wear |
| Silicone | Hot, sun-facing sides | Softer, compresses over time | Very durable in heat |
| TPE | Budget-friendly general use | Less springback than EPDM | Moderate |
We replace seals in windows of any brand, including KBE, Rehau, VEKA and Provedal, and the measurer matches the groove so the new rubber seats without trimming or gaps. The same visit covers plastic, wooden and aluminium frames, plus balcony and veranda units, so the piece is cut to the casement that actually sits there rather than to a generic size. Thickness is the part most people underestimate: a strip of the wrong gauge will either sit proud and block the moving part or sit too deep and leak, which is why the frame is measured rather than guessed. The measurer also checks how the casement hangs before choosing, since a worn hinge changes the gap the rubber has to fill. Get the frame measured on site and the result lasts noticeably longer than a size picked by eye.
The job is built around one idea — renew the whole sealing line, not just the spot that leaks, and leave the sash pressing evenly on every side. Here is what happens from the first message to the final check.
We reply on WhatsApp within five minutes, the measurer comes at a time that suits you, and the technician renews the sealing line along the full frame and sash without taking the unit out. The measurer records the profile type, checks how the sash sits and picks the cord thickness that matches the groove. On the day itself the technician pulls the old cord from its channel, cleans the groove of grit and stale lubricant, presses the new length in and trims it at the corners. The sash usually stays in place, so there is no dust cloud and no need to clear the room — most of the work happens with the window shut. Ask to see the removed piece: cracking along the hinge edge confirms the whole line was due.
The job covers the full perimeter, a press check and light hardware lubrication, and we work seven days a week so a weekend slot is no problem. After the new strip is in, the technician closes the panel and runs a sheet of paper around the frame — it should drag evenly at the handle edge, the hinge edge and the corners. If one corner grips tighter, the press gets a small turn on the adjusting pins until the gap closes the same way all round. Hinges, tilt mechanisms and locking points receive a thin layer of lubricant, which stops the fresh gasket from wearing at the corners. Renewing only the leaking section looks cheaper up front but leaves older material to fail next season, so the full perimeter is the more durable choice. Book the call for a dry day — wet rubber is harder to seat evenly.
Not every draft is a seal problem, and not every seal problem needs a new window. This section draws an honest line between a simple re-seal and work that goes further.
We re-seal plastic, wooden and aluminium units, and where a draft comes from a failed glass unit we can fit a replacement at a surcharge. Timber sashes often need a slightly different profile than plastic ones, so the measurer checks the material before choosing the gasket, and the same visit covers loggia glazing, porch and gazebo frames. Aluminium systems such as Provedal take their own gasket shape, which is why a generic strip rarely sits tight on them. On non-standard openings the fit is cut to the actual size rather than a stock one. Bring a photo of the edge to the first message and the measurer arrives with the right profile already in the van.
A new seal changes how the unit feels for a few days, and knowing what is normal helps you get the most out of the work. Here is what the warranty covers and how to keep the rubber soft.
Repair work carries a 1-year warranty on labour and replaced parts, the price is fixed in the order after measuring, and you pay after installation by cash, card or Kaspi. The measuring visit itself is free: the measurer arrives at a time that suits you, takes the sizes and helps you pick the profile, the rubber grade and the fixings. Nothing is charged before the work is done, and the amount you agree at the order stage is the amount you settle at the end. If a replaced seal starts letting draught through within those twelve months, the return visit and the new part are covered. A unit still under a builder's warranty can usually be re-sealed by a third party without voiding it, but it is worth checking the builder's terms beforehand.
A fresh seal is thicker than the worn one it replaces, so the handle feels stiffer for the opening week or two before the rubber settles into the groove. That resistance is the new profile compressing against the sash, not a fault, and it eases on its own as the material takes the shape of the frame. On a PVC unit the sash press can be loosened a quarter turn if the handle is genuinely hard to turn, but leave it alone if it still latches without force. A light wipe with silicone grease twice a year keeps the seal supple and stops it drying out, which matters more in Taraz's dry summers than most people expect. Dust the groove before you grease it, and never use oil-based sprays, which soften EPDM over time.
A worn seal is rarely the whole story, so the points below gather what actually decides whether a window holds heat, blocks draughts and shuts quietly.
Seal restoration, on-site replacement, post-work check, balcony doors
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionA cracked seal cannot be restored: lubrication and cleaning only bring elasticity back to an intact contour. If the rubber has hardened and cracked, it is replaced with a new one, and the window holds heat again.
In most cases, the sash does not need to be removed: the old contour is taken out of the groove, and the new one is inserted right on site. It is removed only in complex cases, depending on the window and the condition of the hardware.
Yes, the seal is replaced selectively — only on the sash where it has worn out. The technician will inspect the other contours and tell you where replacement is needed now and where it can wait.
Run your hand along the perimeter of the sash and hold a piece of paper or a candle flame to the joints: they should not deflect. Also check that the sash closes tightly and without distortion.
Most likely, the new seal is thicker than the old one, and the sash needs to be adjusted for pressure. Tell the technician — they will adjust the hardware so the window closes easily and without effort.
Yes, on balcony and entrance plastic doors, the seal is replaced just like on windows — along the entire contour or on the problem area. We work with profiles from various manufacturers, including KBE, Rehau, and VEKA.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp