Craftsman holding a white metal grille for a window in the bedroom
from 7 500 ₸ per m²Welded grille to your dimensions, anchor installation, painting in any colorCalculate

Metal Window Grilles in Taraz

First floor · protection

Standard welded

Bars with spacing to fit your opening, anchor fixing. Price from 7 500 ₸ per m², installation separate.

Welded metal window grille
GoogleYandex MapsZoon

5,097 reviews on review sites

What is a metal window grille in Taraz

A metal grille covers the window opening with bars in a frame and is fixed to the reveal or wall.

How it works

The grille consists of a frame sized to the opening and bars with a set spacing. Fixings — anchors, hinges or removable brackets — are selected by the surveyor to suit the window profile and floor. The structure is installed outside and covers the sash completely.

By purpose, there are fixed grilles for first-floor windows, hinged with a leaf for window access, and removable ones that are taken off during work. For country houses and garages, resistance to moisture and ease of checking the fixings are important.

Metal grille outside a window, vertical bars and wall fixings
from 7 500 ₸

price of a welded grille per m²

measuring

free, with a visit at a convenient time

installation

on anchors, with fixing check

5 types
WeldedWrought ironCastLaserAccordion

How a window grille is mounted in Taraz

Fixings are chosen according to the window profile and floor: anchors into the wall, hinges for the leaf, removable brackets or a mortise lock.

Grille fixed with anchors in the window opening
  • 01Anchor fixing

    The grille is fixed with anchors into the reveal or wall. Suitable for fixed structures on the first floor and in the garage.

  • 02Weight and size limits for hinged leaves

    A hinged leaf is convenient as long as the opening is not too wide and heavy: as weight increases, the load on the hinges and lock grows. For large openings, a fixed grille with an access hatch is more practical.

  • 03Choosing the fixing point

    It can be fixed to the reveal, wall or an embedded anchor in the opening. For a thin wall, an embedded anchor is more reliable; for a panel building, fixing into the wall or reveal taking voids into account.

  • 04Repair and reinstallation

    A bent or loose grille is straightened and re-welded. Repair with welding and straightening — from 6 000 ₸ per job.

Metal window grille prices in Taraz

Prices per m² by grille type and individual works, surcharges for a leaf, hatch and lock.

Type of itemPrice
Standard welded grillefrom 7 500₸ per m²
Wrought iron grillefrom 26 000₸ per m²
Cast convex grillefrom 26 500₸ per m²
Decorative laser-cut grillefrom 25 000₸ per m²
Sliding accordion grillefrom 28 000₸ per m²
Hinged grille leafextra chargefrom 15 000₸ per leaf
Removable grille on anchorsfrom 16 500₸ per m²
Fire escape hatch in grillefrom 15 000₸ per item
Lock insertion into grillefrom 5 000₸ per item
Powder coating of grillefrom 5 500₸ per m²
Grille installationfrom 4 500₸ per m²
Grille repair: welding and straighteningfrom 6 000₸ per job
Removal of old grillefrom 4 000₸ per item

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi

Book a measuring visit

Why customers order window grilles from us in Taraz

Our own production, free measuring, painting in any color and installation with fixing check.

Experiencesince 2012

we work across Kazakhstan

Warranty1 year

for work and replaced components

Measuringfree

visit at a convenient time

Paintingany color

profile to match your windows

Installationin-house

delivery and fitting

Coverage17 cities

orders across Kazakhstan

Paymentafter

installation, cash or card

Price fixationin the order

the price is fixed after measuring

How we make and install metal window grilles in Taraz

Four steps from request to a finished grille on the window.

  1. A hand holds a phone with a dark screen by a window before measuring for a grille
    01request

    Request

    You leave a request, the specialist clarifies the address and window type, and agrees on the measuring time.

  2. A tape measure measures the opening of a white window for a metal grille
    02measuring

    Measuring

    The measurer takes the opening dimensions and helps choose the design and fixings.

  3. A finished welded grille stands by the workshop wall, gloves beside it
    03manufacturing

    Manufacturing

    The grille is welded and painted to size, the timeframe is discussed after measuring.

  4. A finished dark grey grille is installed outside a white window metal grille
    04installation

    Installation

    Before installation, the specialist checks the wall and reveals: evenness, base strength and absence of voids at the drilling point. This determines the rigidity of the grille fixing.

Good to know

Metal Window Grilles in Taraz Fitted to Your Window and Your Reason

We make metal window grilles in Taraz to your exact sizes, with free measuring, fixings chosen for your window profile and floor, and frames painted to match your windows. You pay after installation, and our fitters bring the finished grille ready to mount without welding on site.

Which Metal Window Grilles Suit Your Window and Your Reason

The choice is made for two things at once: the job it has to do and the window it goes on. Below are the main options and when each one fits.

Welded, wrought iron, transparent or hinged grilles

Comparison of grille types by task and features
Grille typeWhat it is good forWhat to keep in mind
WeldedStraightforward security on a fixed frameClean lines, quick to make
Wrought ironDecorative look on street-facing windowsHeavier, takes longer to finish
TransparentSecurity without a closed-in lookNeeds more frequent washing
HingedA section that opens for escape or accessAdds a lock and hinges

Grilles for plastic, wooden and aluminium windows and odd openings

We fit window grilles Taraz residents order onto plastic, wooden and aluminium windows, vent panes, loggia glazing, gazebos and veranda openings. Each unit is measured on site, so a non-standard aperture is not a problem — the measurer works from the real dimensions rather than a standard template. A sloped or narrow window, a deep reveal or an old wooden sash all get their own fixing plan, matched to the profile and the floor. In our practice the awkward gaps are worth measuring twice, because a panel cut to a guessed size either rattles or will not seat at all. If your spot is unusual, book the free measuring visit first and choose the type afterwards.

How Metal Window Grilles Are Fixed Without Damaging the Window

The fixing is what separates a careful installation from a unit that simply hangs on. Below is how the measurer picks fasteners for your window profile and your floor.

Z-brackets, pins or magnets chosen for your profile and floor

The measurer selects the fastener to suit the window profile and the floor the flat sits on — Z-shaped brackets, pins (plungers) or magnets. Z-brackets hook onto the frame edge and spread the load across the profile, which suits deep plastic and aluminium units. Pins sit in drilled seats and hold a lighter panel tight against a shallow or narrow sash. Magnets need a flat steel strip on the frame and let you lift the unit off in seconds, which helps on loggias you open often. On upper floors and light profiles the goal is a unit that sits square without twisting the sash, so the same window type can take two different fasteners depending on height and depth. Metal window grilles in Taraz are fixed the same way, with the fastener matched to the profile and the floor.

Fitting a grille over an existing mosquito net

We bring the finished unit and fix it on site without welding, and the framed mosquito net underneath keeps working. The unit goes onto the outer frame or into the reveal, so the mesh stays in its own guides and opens as before; nothing is cut or re-welded on your wall. A framed net lifts out from inside in a minute, and we keep that clearance so winter removal is still a one-hand job. If the net is pleated or on a hinged door, the measurer checks the track first and sets the brackets clear of it. After fitting, test the sash yourself: open it from inside, close it, and make sure the grille does not foul the net or the handle. If it catches anywhere, the bracket position needs adjusting rather than the unit.

Child Safety and a Way Out in One Grille

A barrier that stops a child from falling and one that stops an intruder are not always the same job. The two pull in different directions, and the way out has to survive both.

Bar spacing that keeps a child in and the view open

The gap between uprights is set so a child cannot squeeze through while the view stays readable. Around 10 cm between bars is the usual working figure, because a small head cannot pass a gap that narrow, yet the eye still reads the street through it. Bar section matters as much as the gap: a 12–14 mm square carries the load with fewer uprights, while thin 8 mm rod needs a tighter pitch for the same strength. Wider gaps let in more daylight and cut the number of bars a welder has to set, straighten and paint. On upper floors the uprights must land where the anchors do, so the pitch follows the fixing points. Too dense a grid adds weight and traps dust between the bars.

A hinged section for escape and a lock against intruders

We offer a hinged section with a lock — it shuts the window against outsiders but opens from the inside when it has to. The panel swings on two or three hinges welded to the main frame and carries the lock on the inner face, so from the street it reads as a solid barrier while an adult inside can release it in seconds. We size it to a single adult's reach and keep the hinges on the side that clears curtains and furniture. The lock sits high enough that a small hand cannot work it, yet low enough that a grown-up needs no stool during a fire. Put the opening on the side an adult actually reaches from indoors, not where welding is easiest.

From the Free Measuring Visit to Grilles on the Wall

An order starts with a free measuring visit and ends with payment after the grilles are already on your wall. Here is each step in order, so nothing in the process comes as a surprise.

What the measurer checks and what gets fixed in the order

Measuring and consultation are free: the measurer comes at a time that suits you, takes the sizes and helps you choose the grille type, the fixings and the frame colour. He checks the window profile, how deep the reveal is and which floor you are on, because those three details decide whether Z-brackets, pins or magnets will hold the grille safely. We also look at the opening itself, since an arched or narrow window needs a made-to-measure frame rather than a standard one. You leave the visit knowing the exact grille, the fixing method and the colour, all written into the order. The price is fixed in the order after measuring, so there is no reason to change the sizes halfway through the job.

Making, delivery and paying after the grilles are up

We make the unit to the sizes taken at the visit, bring it to your address and fit it on site, and you pay only after installation — cash, card or Kaspi. A framed grille is assembled quickly once the measurements are confirmed, and the fitting itself is done in one visit with the tools already on the van. If an old grille is still on the window, we take it down before mounting the new one, so we never drill beside rusty anchors that have lost their grip. Delivery and installation cover both windows and doors, and we also repair grilles and swap worn fasteners on frames we did not make. The price agreed after measuring stays the same at the end, whatever the wall turns out to be like.

Paint, Care and How Metal Window Grilles Last in Taraz

Dust and sharp temperature swings test a protective coat faster than most owners expect, so shade and routine care decide how long the bars stay sound. Here is what keeps the grille clean and free of corrosion.

Painting the frame to match your windows

We paint the grille frame any colour to match your windows, so it reads as part of the facade rather than an addition bolted onto it. The coating covers the welds, corners and bracket tabs, not just the flat runs of bar. Shade is matched to your window frame sample in daylight, because one and the same tone reads differently in sun and in shadow — a hue that looks right at noon can look grey on a north wall. Bring a piece of trim or a photo of the frame if the window is on another wall, and the painter works from that reference. A tinted surface also hides the grey of bare steel where dust collects between bars.

Keeping grilles free of rust through Taraz dust and temperature swings

The unit needs a wipe-down and a coating check once a season, and any chipped paint touched up straight away rather than at the end of the year. Dust settles in the weld corners and along the lower bar, and that is exactly where corrosion starts first, so the corners get cleaned before the flat sections. A soft brush or a damp cloth lifts the grit; a wire brush on bare steel only scratches the primer. Summer heat and winter frost expand and contract the steel, and a hairline crack in the coat opens wider with every cycle. Touch-up on a small chip takes minutes and stops surface damage from eating into the bar. On hinged grilles, check the hinges and pins at the same time — a dry hinge wears faster than a painted surface.

The essentials of reliable metal window grilles

The right choice comes down to one clear reason, the fixing that suits your profile, and a few details settled before anyone measures.

  • The reason first: name what the barrier must stop — a child at an open window, an intruder, or a blocked view — and the type follows from that.
  • The fixing: Z-brackets, pins or magnets are picked for your window profile and floor, so the unit holds firm without drilling through the sash.
  • Bar spacing and a hinged section: a narrow step keeps a child in, while one opening leaf gives an adult a way out.
  • Measuring on site: an odd opening is measured where it stands, because a panel cut to a desk measurement will not sit flush.
  • Paint and seasonal care: the surround is painted to match your windows, and a removable model comes off for winter in a minute.

Questions about metal window grilles in Taraz

Choice, safety, installation, care

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Which metal window grilles are better to install, welded or forged?

Welded grilles are simpler in shape, while forged ones look more ornate and are harder to cut through. For security, choose a welded grille with closely spaced bars; choose a forged one when the facade appearance matters more.

02Can a metal grille be installed on a window so that it does not spoil the view from the apartment?

Yes, for this they use thin bars with a clean pattern or a transparent grille with a fine mesh. The pattern and color are matched to the facade and frames so that the structure looks neat.

03How can a metal window grille be made safe for a child so they cannot fall out?

Install a grille with bar spacing that prevents a child from slipping through, and without horizontal crossbars that can act as steps. Additionally, limit the opening of the sash with a lock.

04Is it realistic to manufacture and install metal window grilles in one day?

A standard welded grille made to the measured dimensions is usually not welded and painted in a day, so installation is scheduled after it is ready. The exact timeframe depends on the window and the pattern, and is given after the free measuring visit.

05How are metal window grilles fixed to brick, concrete, and a wooden house wall?

In brick and concrete, the grille is anchored with bolts, while in a wooden house the fixings are selected for the wall material so they can bear the load. The method depends on the window and wall thickness, and is determined by the surveyor.

06What can be done to keep a metal window grille from rusting in the climate of Taraz?

The main protection comes from primer and powder coating, and any chips and scratches should be touched up promptly. Once a year, inspect the welded seams and fixings, and remove dust and moisture traces.

Reviews of metal window grilles in Taraz

5,0based on 97 reviews on platforms
All reviews