Craftsman showing a white window handle with a lock and key in the studio living room
from 3 650 ₸ per itemFree measuring visit, payment after workCalculate

Lockable Window Handles in Taraz

Child protection · with key

Handle with cylinder

Locks the sash with a key, child can't open the window. Price from 3 650 ₸ per item, free measuring visit.

A craftsman stands by a closed white window in a bright room
GoogleYandex MapsZoon

5,097 reviews on review sites

What is a lockable window handle in Taraz

Body with turning knob, key cylinder and screws for fixing to the profile — three parts that distinguish a locking handle from a regular one.

How it works

A locking handle is a body with a turning knob and a built-in cylinder that locks the axis. A regular handle just turns the sash, while here the key blocks rotation and the window stays closed.

The cylinder is replaceable on many models: if a key is lost, it can be replaced separately without touching the hardware. The body is fixed with two screws through the base; the mounting size and axis are matched to the profile.

PVC window with a key lock at the bottom of the sash and a clear grille behind the glass
3 650 ₸

price per locking handle

1 year

warranty on window repair and replaced components

5 min

reply in WhatsApp

Options
With keyWith buttonDouble-sidedColor-matched to profileFor office

How a handle with a key is mounted in Taraz

The handle is mounted on two screws through the base; the mounting size and axis must match the profile. If the body is loose or the thread is stripped, replacement is needed, not tightening.

White window handle with a key lock in its base, close-up
  • 01Screw fixing

    Two screws through the handle base go into the profile, under the cover cap.

  • 02Mounting size and axis

    The square axis and distance between screws must match the profile holes.

  • 03Play and stripped thread

    If the body is loose or the screw turns freely, the fixing doesn't hold — replacement is needed.

  • 04Profile compatibility

    Before replacement, the square axis and screw spacing are checked against the profile holes.

Mesh types for lockable handles with a key in Taraz

Five designs for different tasks: child protection, color matching the profile, balcony door, office. Check the price per item in the price list below.

With key

Key cylinder

A craftsman stands by a closed white window in a bright room

Locks the sash, a child can't open the window without a key.

from 3 650 ₸/item

With button

Turn with press

A craftsman holds a white handle with a button in his hand explaining how the lock works

No key needed, but can't be turned accidentally — button must be pressed.

from 3 400 ₸/item

Color-matched to profile

White, brown, grey

Brown lockable handle on a wood-effect window

We'll match the color of your windows so the handle blends in.

from 3 400 ₸/item

Double-sided

Balcony door

White handle with a lock on a balcony door, a hand on the lever

Handle on both sides of the leaf, door locks from outside.

from 30 000 ₸/item

For office

Access control

A white window with one handle in a bright corridor

Key kept by employee, window locked from outsiders.

from 3 650 ₸/item

Lockable window handle prices in Taraz

Price list for handles, replacement and extra sash protection.

Type of itemPrice
Window handle with keywith key cylinderfrom 3 650₸ per item
Window handle replacementremoval and installationfrom 2 750₸ per item
Double-sided handle for balcony dooron both sides of the leaffrom 30 000₸ per item
Window handlestandard designfrom 3 400₸ per item
Door handle replacementon balcony doorfrom 3 500₸ per item
Handle rotation blockerlocks the sashfrom 2 800₸ per item
Penkid lock with cableextra protectionfrom 2 150₸ per item
Comb limiter with installationfixes opening positionfrom 1 050₸ per item
Installation of blocker or child lockmounting on sashfrom 2 750₸ per item
Installation of balcony latchon doorfrom 3 750₸ per item

Price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi

Book a measuring visit

Why customers order locking handles from us in Taraz

Facts about the company that matter when ordering window handles.

Experiencesince 2012

we work across Kazakhstan

Repair warranty1 year

for work and replaced components

Measuring0 ₸

free, the measurer will come at a convenient time

Paymentafter

cash, card or Kaspi

Workno days off

daily, in Taraz 09:00–19:00

Response5 min

on WhatsApp

Installation warranty5 years

for window installation

Coverage17 cities

of Kazakhstan, including Taraz

How we make and install lockable window handles in Taraz

Four steps from request to checking the lock operation.

  1. A hand holds a phone by a white plastic window, ordering a locking handle
    01Request

    Agreeing on model and color

    The technician checks the mounting size and handle color against the profile before installation so the new hardware fits without gaps and matches the shade.

  2. A tape measure measures the opening of a white plastic window before installing a locking handle
    02Removal

    Taking off the old handle

    The technician removes the cover and unscrews two screws, the old handle is off.

  3. A hand reaches for a screwdriver on a workbench, next to a small white box and screws
    03Installation

    Mounting and adjustment

    The new handle is put in place, rotation and sash locking are checked.

  4. Installed white handle with a lock on a plastic window sash
    04Check

    Cleaning up and handover

    The technician cleans up shavings and covers, shows how to lubricate the cylinder and store the second key.

Good to know

Lockable window handles in Taraz fitted by our craftsmen

We supply and fit lockable window handles in Taraz, choosing the lock type and fixing to suit your profile, sash and floor. A free measuring visit comes first, the price is fixed in the order after measuring, and you pay only after installation by cash, card or Kaspi.

Which lockable window handles type actually protects your window

A window has several ways to limit opening, and each one solves a different problem. Here is how a key-operated fitting differs from a push-button one, a child-safety catch and a restrictor.

Key-lock handle, button lock, child lock or restrictor

Four ways to limit sash opening compared
TypeHow it holds the sashWho it is for
Key-lock handleLocks the sash with a keyRooms you leave unattended
Push-button stopFixes the sash without a keyQuick everyday locking
Child safety blockerKeeps the sash shut against a childHomes with small children
Window restrictorCaps how far the sash opensVentilation with a safe gap

Do you still need a restrictor if the handle already locks

These two parts do different jobs, so the fitting keeps the panel shut while a restrictor only caps the opening angle. A key-lock handle secures the sash shut and needs a key to release it, which suits a room you leave for hours. A restrictor leaves the panel free to swing but holds it at a set gap, so air moves while the opening stays narrow. Fitting both on one window is common: the lever secures the panel when nobody is around, and the restrictor keeps the everyday opening short. If the goal is ventilation without a wide gap, a restrictor paired with a key-operated handle covers both needs better than either part alone.

Will lockable window handles fit your profile and sash

Compatibility decides everything here: the fitting has to seat on your own profile and moving panel without rebuilding the whole hardware set. Here is what the measurer checks before anything is ordered.

Matching window handles with a lock to plastic, wood and aluminium frames

We fit locking handles on plastic, wooden and aluminium windows, and the measurer checks the profile and the moving panel before choosing the fixing. Lockable window handles in Taraz are selected the same way, with the profile and sash measured on site before ordering. The check covers the spindle, the distance between the screw centres and the shape of the rebate, because a section that looks standard from the room side can sit differently once the panel is open. Openings on loggias, verandas and outbuildings often carry a thinner section than the main rooms, so each one is measured on its own rather than copied from the next. Our measurer works seven days a week and brings samples along, so you can feel the locking action before deciding. A model that matches the section seats without drilling new holes, which keeps the window warranty intact.

Sash or frame, and can a lock go on without new hardware

The lever sits on the moving panel and the strike part on the frame, and in most cases we add the mechanism without replacing the whole hardware set. The two halves have to line up to the millimetre: the strike plate is positioned so the bolt or cam enters cleanly when the panel is pulled shut, and a window that already closes with a slight lift needs that lift accounted for first. Existing tilt-and-turn gear usually accepts a locking handle directly — the new part replaces the old one on the same spindle, and the mechanism engages against a strike part fixed to the frame. Keeping the existing gear means the panel keeps its adjustment, so the mechanism does not throw the window out of alignment. If the hardware is worn, we say so during measuring instead of fitting a locking device onto gear that will not hold it.

Keeping a child safe with lockable window handles and still letting air in

For a family with a small child, this hardware is not a box to tick — it keeps the sash shut. Here is what genuinely holds a window closed, and how to ventilate without undoing that protection.

What actually stops a child from opening the sash

  • Key-lock handle: keeps the sash shut because a small child cannot turn the mechanism, which stays out of reach.
  • Push-button stop: holds the handle until the release is pressed and turned together, a two-step motion most toddlers cannot manage.
  • Child safety blocker: blocks the handle from turning at all, so the sash stays fixed even when a toddler climbs on the sill.
  • Restrictor: limits the opening to a narrow gap, so nobody small can push it wide enough to pass through.
  • Where the release lives: protection only works if the release stays out of reach, so plan that spot before fitting.

Can you ventilate a window that has a lock

Yes, a window with a key-operated handle still ventilates in the tilt position, because the mechanism controls the turn opening rather than the tilt. On a tilt-and-turn panel the lever turns one way for tilt and the other way for full opening, and a key-operated or push-button unit usually blocks only the second motion. So the panel tips open at the top for steady airflow while the wide swing stays secured. On a plain side-hung or casement window there is no tilt stage, and that is where a restrictor earns its place: set to a small angle, it gives airflow a child cannot widen. A warm day then brings a breeze in without the risk of a wide gap.

Fitting, repairs and what happens when a lock jams

Fitting takes very little time once the parts are chosen. What matters more is what happens afterwards — a handle that jams, a key that disappears, or a fixing that wears out over the seasons.

What the fitting includes and how long it takes

We fit the lever and its strike part, set the mechanism and check the sash closes cleanly, and the job is done at the same visit once the parts are chosen. A master removes the old handle, lines up the new spindle and rose, fixes the strike plate on the frame and adjusts it so the bolt engages without force. On plastic, wood and aluminium sashes the sequence is the same, though the fixing screws differ. The handle and strike part come as a set, so nothing has to be drilled beyond the existing holes. Checking the panel after fitting catches a misaligned strike early, before it starts wearing the mechanism — a quick adjustment at the visit saves a repair later.

A jammed lock, a lost key or a worn handle

We repair or replace a lockable handle when it jams, spins or the key stops turning, and we swap the fixings if they have worn. A part that spins usually means a stripped spindle, while a mechanism that will not turn points to a dry or misaligned cylinder. When the original is lost and no spare exists, the cylinder is drilled out and a new one fitted with a fresh set. Worn screws and loose roses are replaced at the same visit. A mechanism that jams in winter usually needs cleaning and a light grease rather than a new unit, so a repair visit is often the practical choice.

Ordering, payment and the warranty behind the work

The order runs on three simple terms: a free measuring visit, a price fixed in the order once sizes are known, and payment only after the fit. Below is how that works in practice and what the warranty covers.

Free measuring, a fixed price and paying after the fit

Measuring and consultation are free, the measurer comes at a time that suits you, and the price is fixed in the order after measuring, so you pay after installation by cash, card or Kaspi. The measurer takes the exact sizes of each sash, checks the profile and the floor level, and helps you choose the handle, the mechanism type and the fixings — Z-brackets, plungers or magnets — that suit your window. We paint the frame any colour to match your windows, and a framed screen made to your size takes 10–15 minutes, a pleated one 40–60 minutes. Fixing the price after measuring means the quote already accounts for your profile and fixing, so there are no surprises on the day.

What the warranty covers and how to reach us

Window repair work and replaced parts carry a one-year warranty, we reply on WhatsApp within five minutes, and we are open seven days a week. The one-year term covers both the labour and the parts we swap — a handle with a lock, a cylinder, a key set or a worn fastener — so a handle that jams again after a repair is our job, not yours. For a full window installation the warranty runs five years, and glass unit replacement carries three. We serve plastic, wood and aluminium frames, and mosquito screens can be ordered across 17 cities of Kazakhstan. Keeping the fitting receipt makes a warranty claim quick, because it shows which parts were replaced and when.

What to check when choosing lockable window handles

A keyed handle only earns its keep when the mechanism matches the room, the frame and the people using the window every day.

  • Mechanism choice: a key-operated model suits ground-floor and rented rooms, a push-button one is quicker for daily use, while a child restrictor controls how far the sash opens.
  • Fit first: profile depth and sash construction decide which unit works, so the measuring visit settles compatibility before any hardware is ordered.
  • Children: protection works only when the key sits out of reach and the restrictor still allows ventilation.
  • Jammed units: winter stiffness usually comes from dried lubricant or a misaligned striker, and cleaning plus a drop of silicone frees it without new parts.
  • Price and payment: the figure is fixed in the order after measuring, and payment follows installation by cash, card or Kaspi.

Questions about lockable window handles in Taraz

Lockable handles, lost keys, painting, balcony door, wear

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01How does a lockable handle differ from a handle with a push-button lock?

A lockable handle locks with a key, and the sash cannot be opened without it. A push-button lock only limits turning, but it can be pressed to open the window, so a lock is more secure for child safety.

02What can I do if the key to my lockable handle is lost?

If there is no spare key, you will have to replace the lockable handle entirely or call a technician to open it. Do not try to force the window open — you may damage the hardware.

03Can a lockable handle be painted to match the window color?

Yes, there are models in various colors: white, brown, gray, and others. The technician will help you choose a shade to match your profile during the measuring visit or consultation.

04Can a lockable handle be installed on a balcony door, or is a special model needed?

A special handle is installed on a balcony door, often double-sided, so it can be opened from both sides. A standard window lockable handle may not fit due to spindle length and mounting method, so it is better to call a technician for selection.

05How can I tell that a lockable handle is worn out and needs replacing?

If the key turns with effort, the handle is loose, or the lock does not secure the sash, the mechanism is likely worn. In that case, it is better to replace the handle rather than repair it — the technician will select a new one for your profile.

06Can a lockable handle be installed on a window with a mosquito screen?

Yes, a mosquito screen does not interfere with installing a lockable handle if it does not cover the mounting point. The technician will remove the old handle, check compatibility with the hardware, and install the new one without removing the screen.

Reviews of lockable handles in Taraz

5,0based on 97 reviews on platforms
All reviews