Hardware repair
We restore mechanism movement and sash pressure — from 7 800 ₸ per job, parts selected to match your profile


Hardware repair
We restore mechanism movement and sash pressure — from 7 800 ₸ per job, parts selected to match your profile

Handle replacement
We select a handle to match your profile and window color — from 2 750 ₸ per item, with sash movement check

Sash adjustment
We adjust hinges and perimeter pressure — from 3 000 ₸ per sash, with or without removal

Seal replacement
We replace the seal around the sash — price according to the price list, selected to match your profile

Double glazing replacement
We manufacture and install new double glazing — price according to the price list, urgent option available

5,097 reviews on review sites
Restoring the operation of sashes, hardware and seals without replacing the entire window
A plastic window consists of a profile, double glazing, hardware and seals. Plastic window repair is the restoration of moving parts: hinges, handle, scissors, cams and pressure. The technician works on site and removes the sash only in complex cases.
Hardware is responsible for opening modes and pressure tightness. The seal protects against draughts. Double glazing is replaced when cracked or fogged. Repair extends the window's service life without full replacement of the structure.

Sash adjustment
Warranty on work and parts
Measuring and consultation
Typical issues people in Taraz contact us about, and what the technician does

The handle won't turn, the sash jams. The technician lubricates the mechanism or replaces worn parts.
The sash opens in two positions at once. The blocker and the hardware scissors are repaired.
The mechanism doesn't hold the sash in the tilted position. The scissors are replaced with ones compatible with the profile.
The sash catches on the frame or is skewed — the window closes poorly. The technician will determine the cause of sagging during inspection.
It blows from the gaps, freezes in winter. The pressure and condition of the seal are checked, and if worn, replaced.
The handle is loose or doesn't lock. It is replaced with a new one matched to the profile and colour.
Main types of work and components with price per unit. The exact cost is confirmed by the technician after inspection.
Simple or with removal

Adjusting hinges and pressure. Eliminates sagging and catching of the sash.
Mechanism restoration

Cleaning, lubrication and replacement of worn hardware parts.
Matched to profile

New handle with checking sash movement and locking.
Part for hardware

Replacing the sash tilting mechanism with a compatible one.
Around sash perimeter

New seal eliminates draughts and freezing.
Cost of PVC window repair work in Taraz. The final price is fixed after measuring.
| Type of work | Price |
|---|---|
| Simple sash adjustmentbasic adjustment without removal | from 3 000₸ per sash |
| Sash adjustment with removalcomplex case with sash removal | from 4 000₸ per sash |
| Balcony door adjustmentadjusting door movement and pressure | from 6 000₸ per item |
| Hardware repairrestoring mechanism operation | from 7 800₸ per job |
| Hardware replacement on sashfull set replacement | from 10 000₸ per sash |
| Replacement of scissors or corner switchpart selected to match hardware | from 5 500₸ per item |
| Replacement of cam or striker plateminor locking repair | from 1 300₸ per item |
| Hinge replacementwhen hinges are worn | from 4 750₸ per item |
| Window handle replacementselected to match profile | from 2 750₸ per item |
| Conversion to tilt-and-turn openingchanging opening scheme | from 19 000₸ per sash |
| Conversion of fixed window to openingrequires new sash profile | from 28 000₸ per sash |
| Installation of micro-lift or extra pressureadditional option | from 1 700₸ per item |
| Installation of balcony latchfor balcony doors | from 3 750₸ per item |
| Opening a blocked sashwhen sash is jammed | from 2 400₸ per sash |
| Cleaning and lubricating hardwaremechanism maintenance | from 1 250₸ per sash |
Price is fixed in the order after measuringMeasuring and consultation are freePayment after work completion
Order repairFacts about us: warranty, measuring, payment and working hours
For work and replaced components
For window installation
The measurer will come at a convenient time
Cash, card or Kaspi
Daily, in Taraz from 09:00 to 19:00
You can order in 17 cities of Kazakhstan
We reply within 5 minutes
We work across Kazakhstan
Four steps from request to window check

Describe the problem via WhatsApp or phone. We will agree on a convenient time for the technician's visit.

The technician will inspect the sash, hinges, handle and pressure, name the cause and repair method.

Will perform the work and replace worn parts with ones compatible with your profile.

Check the smooth movement of the sash, tightness of pressure around the perimeter and handle locking in each position.
Good to know
Centre Okon handles pvc window repair in Taraz with its own fitters, not through middlemen. We adjust hardware and sash geometry, replace seals on KBE, Rehau, VEKA and Provedal profiles, and swap fogged glass units, with urgent glass replacement done within a day. Repair work and replaced parts carry a one-year warranty.
A window rarely fails in only one way. A draught, a misted pane or a sticking handle can each come from a worn gasket, dropped hinges or a failed glass unit, so the first task is naming the cause.
We check the rubber first by running a hand along the sash edge and looking for a flattened or cracked gasket, then test whether the leaf still pulls tight against the frame when the handle turns. A gasket gone hard loses its spring and stops filling the gap, while hardware that has drifted leaves the leaf sitting a millimetre or two off the frame even with the handle fully down. On older profiles the compression weakens gradually, so the leak begins as a thin whistle in wind and grows into a cold strip along the floor. A draught appearing only on one side usually points to a worn seal, while a leak running along the whole edge more often means the hardware lost its compression and needs adjusting rather than new rubber.
Condensation trapped inside the glass unit means the sealed cavity failed, a leaf that scrapes the frame dropped on its hinges, and a crack in the profile itself is the one case where repair usually gives way to replacement. Moisture between the panes cannot be wiped away from outside, so treating it as a cleaning problem only delays the swap, and a panel that slipped will keep wearing the same hinge corner until the geometry is reset. A hairline split in the plastic widens with every temperature swing, because the material expands and contracts around a fixed reinforcement. Once the surround is split, patching holds for a season at most — the whole section has to be swapped.
The honest answer depends on which part gave out, because a worn gasket or a loose hinge is a small job while a bent sash or a warped profile changes the calculation.
We keep the window and replace only the worn component when the frame is sound, the profile is straight and the trouble sits in the gasket, the hardware or the glass, which covers most of the calls we get. A sash that drags on the sill, a handle that no longer turns or a draught along the edge usually traces back to tired fittings or a compressed seal, and both are swapped without touching the surrounding structure. Our team adjusts the hardware and the sash pressure on the spot, so the window closes tight again on the same day. A window that is otherwise tight and square rarely justifies a full swap, and paying for a fresh installation while the old frame is still good usually buys nothing that a new seal and a quick adjustment would not have fixed.
A glazed panel that has fogged inside or cracked is replaced whole rather than repaired, and we can make and fit the new one within a single day when the size is confirmed at the visit. Moisture trapped between the panes means the sealed edge has given way, and no amount of cleaning brings the clear view back. Cracked glass is a safety question first, so the old panel comes out and the fresh one goes in on the same visit. The frame and sashes stay in place during the swap, so the room is not opened up to the weather the way a full replacement would leave it, and the rest of the assembly keeps its existing fit. For households across Taraz, that means one working day instead of a full installation.
The right gasket and fittings depend on the profile in your wall, so the fitter matches the part to the window rather than fitting whatever is on the van.
| What we match | Chosen for | Typical trigger |
|---|---|---|
| Gasket cord | profile make and groove | draught, hardened rubber |
| Hinge and stay | sash weight and opening side | sagging leaf, weak compression |
| Handle and lock gear | profile and lock layout | handle no longer pulls tight |
| Glass unit | rebate and pane size | fogging inside or a crack |
We can swap just the gasket when the fittings still pull the leaf tight and the only fault is worn rubber, which is common on windows that are otherwise sound. We change it in units of any maker, KBE, Rehau, VEKA and Provedal included, and the fitter brings cord cut for your frame rather than a universal strip. The job stays small: the leaf comes off, the old rubber lifts out of the groove, and the new one presses in along the full perimeter. If the handle turns loosely or the leaf no longer meets the frame evenly, fresh rubber alone will not hold the draught back, so the adjustment comes first and the gasket after it. Ask the fitter to check compression at the corners before closing the order.
A repair visit is short and predictable, and knowing the order of steps helps you plan the day and understand what the fitter is checking while he works.
We reply on WhatsApp within five minutes, book a free measuring visit at a time that suits you, and the fitter takes the sizes and confirms the work before anything is ordered. For a pvc window repair Taraz residents can book the same way: send a message and the visit is scheduled at a convenient time. The measurer checks the profile, the sash geometry and the existing seal, then helps you choose the parts, the fittings and the fixings that match your window and floor. Nothing is cut or ordered from a photo or a rough guess over the phone. The price is fixed in the order after measuring, so the figure you agree at the visit is the one you pay, and payment is taken after the work is done by cash, card or Kaspi.
On the day the fitter adjusts the hardware, resets the sash geometry and fits the new gasket or glass unit, and a standard adjustment or seal swap is finished in a single visit. He brings the fittings, the seal and the tools with him, so a sash that has dropped or a handle that no longer locks is put right on the spot. A glass unit that has to be made to size is the one step that can push the job to a second visit, which is why we confirm the pane measurement at the first call rather than guessing it. We work seven days a week, so a weekend visit costs you nothing extra in time. Book the first half of the day if you want the flat back to normal before evening.
Some jobs at the window are safe to try at home and some are not, and knowing which is which protects both the frame and the cover behind the work.
Repair work and the parts we replace carry a one-year warranty, a replaced glass unit carries three years, and window installation carries five, so the cover matches the job rather than a single blanket term. The one-year term on repair applies to both labour and the new parts fitted during the visit, whether that is a seal, a hinge set or a handle. A glass unit swap sits under its own three-year term because the sealed chamber is a separate product with its own failure modes. Window installation, as the largest piece of work, holds the longest cover at five years. Keeping the order and the fitter's note makes a warranty claim simple, because the part and the date are already on record when something needs a second look.
A window rarely fails all at once, so the useful habit is to name the symptom before choosing a fix. These five points sum up what decides the outcome.
Draughts, seal, adjustment, condensation
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionOnly an inspection will tell for sure: if the rubber is soft and intact and the sash moves freely, the compression is probably off and adjustment is needed. If the seal has hardened or torn, it gets replaced.
Adjustment changes how tightly the sash presses against the frame using the cams and hinges, while the seal itself stays in place. Replacing the seal means fitting new rubber around the whole perimeter when the old one no longer holds.
You can, but without experience it's easy to fit the seal loosely or damage the profile when removing it. The technician will match the rubber to your system and fit it so there are no draughts.
There is a difference: each profile has its own groove shape and rubber thickness, so there's no universal option. We replace seals in windows of any manufacturer, matching the material to the specific system.
Moisture between the panes means the double glazing has lost its seal, and you can't clean it from the outside. Only replacing the double glazing will help, and the frame and sash don't need to be touched if the profile is intact.
Adjustment can be done in winter too — the work is indoors and frost doesn't affect it. Replacing the seal outdoors in severe cold is another matter: the technician will advise when best to schedule it.
They check the hinges, the gaps around the perimeter and how the sash sits in the frame when closing. These signs show whether adjusting the hinges is enough or worn hardware parts need replacing.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp