Single-sash
Compact window with one sash for small openings. Price from 42 500 ₸ per window with installation.


Single-sash
Compact window with one sash for small openings. Price from 42 500 ₸ per window with installation.

Double-sash
Two sashes provide more light and air. Price from 65 500 ₸ per window with installation.


Bay window
Panoramic construction with several sashes. Price from 60 000 ₸ per m² turnkey.

Soundproof
Double glazing with enhanced sound insulation for windows facing the road. Price from 60 000 ₸ per m².

5,097 reviews on review sites
A new window changes not only the look of the opening but also the heat, sound and burglary resistance of the flat.
A PVC window consists of a profile with a reinforcing insert, double glazing, hardware and seals. During replacement, the frame and sashes are replaced entirely, not just the glass.
Replacing only the double glazing is cheaper but does not solve the problem of a freezing joint or sagging hardware. A new window with installation to GOST addresses all components at once.

warranty on window installation
warranty on double glazing replacement
measurement and consultation
The fixing method and joint sealing determine whether the window will be draughty or freeze in winter.

Rigid fixing through the profile into the wall — reliable for panel and brick buildings.
Fixing on plates is convenient in openings with a quarter and when finishing reveals.
The joint is filled with expanding foam, PSUL tape is applied outside, and a vapour barrier tape inside.
If the joint freezes, the frame is dismantled and reinstalled to GOST. Sealing of external joints — from 2 000 ₸ per linear m.
Five options for different tasks: from a compact bedroom window to a soundproof one by the road.
For bedroom and kids' room

Compact window with one sash for small openings.
For living room and kitchen

Two leaves let in more light and air.
Window and door included

A complete set for access to a balcony or loggia.
For new builds and private houses

A panoramic structure with several leaves.
For windows near the road

A double glazing unit with enhanced sound insulation reduces street noise.
The cost depends on the size of the opening, the type of structure and additional work.
| Type of work | Price |
|---|---|
| Installation of a PVC windowstandard installation | from 4 650₸ per m² |
| Window installation to GOSTvapour and waterproofing of the joint | from 5 200₸ per m² |
| Dismantling of the old windowremoval of frame and sashes | from 1 800₸ per m² |
| Single-sash PVC windowwith installation | from 42 500₸ per window |
| Double-sash PVC windowwith installation | from 65 500₸ per window |
| PVC window with installationturnkey construction | from 60 000₸ per m² |
| Balcony unit with doorwindow and door as a set | from 95 500₸ per item |
| Installation of PVC window sillwindow sill not included | from 5 500₸ per linear m |
| Installation of drip capexternal drip cap | from 3 250₸ per linear m |
| PVC reveals from sandwich panelsfinishing after installation | from 4 700₸ per linear m |
| Reveals for a standard window, turnkeyset for one window | from 15 000₸ per window |
| Sealing of external jointsduring reinstallation | from 2 000₸ per linear m |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation
Calculate the costEight facts worth checking before ordering window replacement.
for window installation work
for replacement of double glazing units
free and at a convenient time
availability of own production and manufacturing lead times for the structure
how the contractor confirms the warranty in writing and what constitutes a warranty case
we work every day
of Kazakhstan, including Kokshetau
we work across Kazakhstan
Four steps from request to finished window.

The measurer records the dimensions of the opening and enters the structure specification into the order.

The window is manufactured at the production facility according to the agreed dimensions.

The date and time of installation are agreed, it is clarified who will be at home, access to the opening is provided and the work area is cleared of furniture.

After installation, the reveals are finished and the finished window is handed over.
Good to know
We handle pvc window installation in Kokshetau with our own crews, not subcontractors. A free measuring visit comes first, the measurer picks the profile, glass unit and fixings for your opening and floor, and you pay only after installation. Every fitting carries a 5-year warranty on the work.
A draughty, misted window does not always mean the frame has to go. Below are three levels of intervention and the signs that point to each one.
We replace the seal on windows of any manufacturer, including KBE, Rehau, VEKA and Provedal, and a fresh seal plus a hardware adjustment often restores a window that only seems finished. A draught that runs along the sash edge, a handle that has to be forced, condensation on the inner glass in the morning — these are signs of a flattened gasket or worn moving parts, not a failed frame. Repair work by our team carries a one-year warranty on labour and every replaced part. A seal that has gone flat lets cold air reach the frame, so the glass itself fogs at the edges long before the unit fails — checking the seal first saves a full swap.
| What failed | What we do | Warranty |
|---|---|---|
| Seal, hardware, draughts | Repair and adjustment | One year, labour and parts |
| Foggy or cracked glass | New glass unit, frame stays | Three years |
| Warped frame, rotten reveal | Full window swap | Five years on fitting |
From the first call to a signed handover slip, here is what happens inside the flat, how long the work takes and the moment you settle the bill.
We take the previous frames away, work through the winter, and you pay after installation by cash, card or Kaspi. Dust is the part most people worry about, and it is contained rather than eliminated — the crew seals the doorway with plastic sheeting and wipes the sills before packing up. Discarded frames and glass leave with us on the same visit, so nothing sits in the yard or on the landing. Winter fitting is normal practice because the opening is closed again within the same visit, so the flat never loses heat for long. A pvc window installation in Kokshetau follows the same order, so the flat is left clean and ready to use. We are open seven days a week, and a WhatsApp message gets a reply within five minutes.
Size and fixing decide more about how a window behaves than the profile name on the sticker. Here is how both are settled before anything is ordered for your home.
Measuring and consultation are free, and the specialist works from the bare opening rather than copying the old unit, which is where most size errors start. On site we check the width and height at three points, the diagonal, the depth of the reveal and how far out of level the sill sits, then note the wall material. From those numbers our specialist picks the profile, the glass unit and the fixing together, so the three fit the same opening instead of fighting each other. An old unit can sit out of square for years, so a new window cut to its dimensions inherits the same skew and never seals properly. Ask to see the measured figures written into the order — a window built to the reveal, not to the assembly it replaces, is what keeps the sash closing cleanly for the whole warranty term.
The measuring visit settles the choice between anchors and mounting plates by wall material and floor, and that choice is fixed in the order before work starts. In a panel block the anchors bite into the concrete panels and hold the window rigid against the slab joints; in brick or aerated block the pattern shifts to suit the softer bed. On an upper floor the wind load on the assembly is higher, so the anchor pattern matters more than the profile brand for how the window behaves in a storm. We set more anchor points along the top rail and the corners on higher floors, and the count goes into the order so the crew fits exactly that. Ask which fixing your wall and floor call for — it is the one detail a storm will test first.
A window holds warmth only when the frame and the glazing are chosen as one assembly. Picking them separately is the usual reason a sound-looking window still feels cold in January.
| Option | Where it suits | Glazing |
|---|---|---|
| Economy profile | Standard flat openings | Single or double chamber |
| Prestige profile | Larger spans, colder rooms | Double chamber |
| Glazing only | Sound frame, failed pane | Matched to existing system |
A double-chamber unit typically serves well over a decade before the edge seal gives out, and the first sign is fogging between the panes. Two panes sit apart on a spacer bar, and each sealed cavity holds dried air or argon; the perimeter bead is the only barrier keeping moisture out of those gaps. Fogging that will not clear means that barrier has failed, not condensation on the room side, and once dampness is trapped inside, the assembly has to be replaced rather than wiped. Households here meet this most often after a hard frost followed by a thaw. A heavier pack in a light frame pulls on the hardware over time, so the pairing matters as much as the parts themselves. On the colder rooms, ask for a double-chamber build rather than a single one, and have the fitter check the spacer and bead before signing off.
Every job comes with written terms: a five-year guarantee on the fitting, three years on a new glass unit and one year on repair. Payment follows the work, and a measuring visit can be booked without cost.
Every fitting carries a five-year warranty on the work, a new glass unit carries three years, and repair work carries one year on labour and replaced parts. The five-year term covers the installation itself: how the frame sits in the opening, how the sashes close, how the seals and fixings hold after seasons of frost and heat. A replacement glass unit is covered separately for a three-year term, because the unit and the fitting fail for different reasons. Repair work is narrower — one year on the labour and on any parts we swapped. The warranty holds as long as the window is not altered by someone else, so keep the fitting untouched and the paperwork with the order.
We are a direct contractor with our own crews, we reply on WhatsApp within 5 minutes, and we work seven days a week across Kokshetau and the Akmola region. No middleman sits between the measurer and the fitter, so the person who takes the sizes is from the same team that installs. The measurer comes at a time that suits you, measures the opening, and helps pick the profile, the glass unit and the fixings. The price is fixed in the order after measuring, and you pay only after installation: cash, card or Kaspi. Booking the measuring visit first costs nothing and commits you to nothing, so it is the cheapest way to get a fixed figure before deciding.
A window that drafts, sticks or fogs up rarely needs the whole frame torn out, and the useful decisions come before anyone orders a part.
Window replacement, double glazing, winter fitting, wooden houses
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, if the profile and hardware are intact, the double glazing can be replaced separately. It is faster than replacing the whole window, but if the frame is worn out, there will be no effect.
When replacing a window, the frame, sashes and hardware are changed, while the double glazing and seal are only part of the construction. If the profile is warped or the hardware is worn out, a partial replacement will not solve the problem.
Yes, replacement is possible in winter if the technology is followed: quickly dismantle and immediately install the new window. They try to protect the finish, but in severe frost it is better to coordinate the work with the installer.
When replacing windows in Kokshetau, we try to minimize dirt: we use protective film, carefully dismantle the old frame and remove debris immediately. After installation, we always clean up.
For a living room, we recommend a double-chamber double glazing unit — it provides good thermal and sound insulation. A single-chamber one is suitable for balconies or unheated rooms.
Yes, plastic windows are also installed in wooden houses, but necessarily taking into account shrinkage: the fixing is made sliding or they wait until the log house settles. In Kokshetau, installers select fixings and insulation for the opening for the specific house construction.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp