Technician holding a white window handle and a screwdriver in a kitchen
from 1 250 ₸ per job1-year repair warranty. Reply on WhatsApp within 5 minutes.Calculate

PVC Window Repair in Kokshetau

Sash catches the frame · adjustment

Sash adjustment

Basic adjustment without removing the sash — from 3 000 ₸, with removal — from 4 000 ₸. Eliminates sagging and loose sealing.

A craftsman holds an L-shaped steel hex key for adjusting window hinges
GoogleYandex MapsZoon

5,097 reviews on review sites

What PVC window repair in Kokshetau involves

It is restoring the operation of the sash, hardware and seal without replacing the entire window.

How the service works

A plastic window consists of a frame, sash, hardware, seal and double glazing. Plastic window repair means restoring the operation of these components: adjusting the sash sealing and movement, replacing worn hardware parts, the seal or the double glazing.

Work is distributed by component: in hardware, the locking mechanism is restored, handles, cams and scissors are replaced; in the seal, the perimeter contour of the sash is replaced; in double glazing, the unit is replaced entirely if cracked or if hermeticity is compromised. Window repair warranty — 1 year for work and replaced components, window installation — 5 years, double glazing replacement — 3 years.

Technician repairs the hardware of a white plastic window
1 year

warranty on window repair and replaced components

5 years

warranty on window installation

3 years

warranty on double glazing replacement

Types of work
AdjustmentHardwareSealDouble glazingHandle

How the technician fixes plastic window faults in Kokshetau

Typical issues reported in Kokshetau and how they are resolved.

A close-up of a plastic window corner with a new locking cam and hinge
  • 01Hardware jammed

    The handle won't turn, the sash is stiff — the technician repairs or replaces the hardware.

  • 02Sash opened in two modes

    The blocker or scissors have failed — the blocker needs repair and the scissors need replacement.

  • 03Sash catches the frame at the bottom

    The technician checks the sash geometry and adjusts or replaces the hinges if needed.

  • 04Draughts around the perimeter

    The compression has loosened or the seal has worn out — compression adjustment and seal replacement.

  • 05Broken handle

    The handle won't turn or is cracked — handle replacement matched to the profile and colour.

Types of parts for plastic window repair in Kokshetau

What gets replaced during repair: hardware, handles, seals, double glazing, locking pins. The technician selects parts for your profile.

Hardware

KBE, Rehau, VEKA, Provedal

A craftsman holds an L-shaped steel hex key for adjusting window hinges

Replacing the set on the sash or repairing the locking mechanism.

from 7 800 ₸/job

Handles

matched to profile and colour

Technician holds up a new white handle for a plastic window

Replacing a broken handle with one that fits your window model.

from 2 750 ₸

Seal

any manufacturer

A master holds a coil of grey rubber window seal on his palm

We replace seals in KBE, Rehau, VEKA, Provedal and other windows.

from 1 000 ₸/linear m

Double glazing

urgent production

A master holds a small double-glazed unit sample with two glass sheets on his palm

Replacement of cracked double glazing, urgent production with a surcharge.

from 5 500 ₸/m²

Locking pins

locking elements

A craftsman holds a brush and a can of silicone lubricant for window hardware

Replacing worn locking pins or strike plates around the sash perimeter.

from 1 300 ₸

PVC window repair prices in Kokshetau

Prices are according to the price list; the exact amount is fixed after measuring.

Type of workPrice
Simple sash adjustmentbasic adjustment without removing the sashfrom 3 000₸ per sash
Sash adjustment with removalcomplex adjustment with sash removalfrom 4 000₸ per sash
Balcony door adjustmentadjusting the movement and sealing of the door leaffrom 6 000₸ per item
Hardware repairrestoring the locking mechanismfrom 7 800₸ per job
Sash hardware replacementinstalling a new hardware set on the sashfrom 10 000₸ per sash
Scissor or corner switch replacementthe part responsible for opening modesfrom 5 500₸ per item
Cam or strike plate replacementlocking elements around the sash perimeterfrom 1 300₸ per item
Hinge replacementeliminates sash saggingfrom 4 750₸ per item
Window handle replacementmatching to profile and colourfrom 2 750₸ per item
Conversion to tilt-and-turn openingchanging the sash opening schemefrom 19 000₸ per sash
Conversion of fixed window to openinginstalling a sash instead of the fixed partfrom 28 000₸ per sash
Micro-lift or extra seal installationsmooth movement and enhanced sealingfrom 1 700₸ per item
Balcony latch installationsecuring the door leaffrom 3 750₸ per item
Opening a jammed sashif the sash is stuck in the closed positionfrom 2 400₸ per sash
Hardware cleaning and lubricationpreventing mechanism jammingfrom 1 250₸ per sash

The price is fixed in the order after measuring.Measuring and consultation are free.Payment after installation: cash, card or Kaspi.

Order repair

Why customers order plastic window repair from us in Kokshetau

Facts about the company: warranty, timelines, payment and contact.

Repair warranty1 year

for work and replaced components

We workwithout days off

we accept requests daily

Paymentafter

cash, card or Kaspi

WhatsApp response5 minutes

we reply within five minutes

Measuringfree

ask the technician for a convenient visit time

Installation warranty5 years

for window installation

Double glazing warranty3 years

for double glazing replacement

Coverage17 cities

you can order in 17 cities of Kazakhstan

How PVC window repair is carried out in Kokshetau

The process from request to sash check.

  1. A hand holds a smartphone with a dark screen next to a plastic window
    015 minutes

    Request

    You write on WhatsApp or call, we agree on a convenient visit time.

  2. A tape measure lies along the opening of a plastic window on a light windowsill
    02on the day of visit

    Agreeing scope and cost

    The technician lists the work and the final amount before starting repair.

  3. A master holds a new white window handle on his palm and checks its fixing with a screwdriver, screws on the workbench
    03on site

    Work

    Performs adjustment or replacement of hardware parts.

  4. A finished plastic window with a new handle and an even sash after repair
    04after work

    Check

    Checks compression and sash movement, shows the result.

Good to know

PVC Window Repair in Kokshetau from the Centre Okon Team

For pvc window repair in Kokshetau, the Centre Okon team works as a direct contractor with its own fitters, not a broker passing your request on. We diagnose the window, adjust hardware, swap seals and glass units, and back window repair with a one-year warranty on labour and replaced parts. Measuring and consultation are free.

Repair or replace your pvc window repair based on its real condition

Repair stays possible while the frame and its steel core are intact; swapping the whole window becomes the honest answer only once the geometry is broken. Here is how a fitter tells one case from the other.

Three signs your window can still be repaired

We repair a PVC window whenever the frame and its steel reinforcement are still sound, because hardware, seals and glass panels are all replaceable parts. A dropped sash that catches on the profile is corrected by re-hanging it on the hinges and resetting the pressure with an Allen key at the corner cams. A worn seal is pulled out of its groove and a new one pressed in along the whole perimeter, while a failed glazing panel slides out of the bead and goes back in fresh. Our fitters adjust sash pressure and hardware first, since most draught and stiff-handle complaints come from settings that drifted over years of use. A window that only fails to close tightly is almost never a replacement case; a repair visit costs far less than a new unit because the existing structure is reused.

When a window has to be replaced instead

Replacement is the honest answer when the frame is warped, the reinforcement is corroded or the profile has cracked through, since no adjustment can restore a broken geometry. An opening that has bowed out of square leaves the sash sitting unevenly no matter how the hinges are set, and a cracked profile lets water into the steel core, which then rusts from the inside. Wooden or aluminium slopes around a window unit do not block repair work — the fitter works around them and the structure stays in the wall. A foggy glass unit is not a replacement case for the whole window; the panel alone is swapped, and the sashes and hardware stay exactly where they are.

Why your pvc window repair lets in a draught and stops closing

People usually search by the symptom they feel, not by the name of the service. Below is a map of what you notice, what causes it, and what is done about it.

Symptom, cause and fix at a glance

matching each complaint to its cause and repair
What you noticeLikely causeWhat we do
Draught along the sashWorn or flattened sealReplace the seal to match the profile
Handle turns but the leaf stays looseHardware out of adjustmentAdjust the sash pressure and hinges
The leaf catches or scrapes the frameSagging hingeRe-set the hinge and re-align the sash
Glass fogs between panesLost unit sealSwap the glass unit

Can you adjust the sash pressure yourself

You can turn the pressure cams a little yourself, but we see many windows where a home adjustment made the draught worse by over-tightening one side. The cams sit on the sash edge near the hinges and the handle, and a quarter turn either way changes how hard the sash presses the seal. Pressure is set per sash corner, so a fitter checks all four points together: tightening only the handle side pulls the sash out of square and wears the seal unevenly. Our fitters adjust the sash pressure and the hardware as one job, then test the closing line along the whole frame. Before touching the cams, note how the sash sits in the opening — if a corner is already low, the hinge needs re-setting first, and turning the cams only hides the problem.

Seals and hardware for pvc window repair matched to your window profile

Seals and hardware are chosen to fit the profile and mechanism of a specific window system, not picked by eye. Here is why a generic part often fails and how the right one is selected.

Why a universal seal is a false economy

We replace seals in windows of any maker, including KBE, Rehau, VEKA and Provedal, because the gasket has to match the shaped channel of that specific system rather than a generic size. Each brand holds the cord differently: a Rehau channel is not the same depth as a VEKA one, and a Provedal frame grips it at another angle. A gasket that sits too loose lets air past within a season, while one that is too thick stops the sash closing flush, so the match matters more than the material alone. Before ordering, the fitter measures the channel width and the cord diameter on your own frame.

Which hardware parts usually get replaced

The parts we replace most often are hinges, handles and the pressure cams, and we match each item to the hardware line already fitted to your window. Swapping a single hinge without checking the rest of the mechanism often shifts the load onto the older parts, so a fitter inspects the whole set before replacing anything. Hinges get re-set or renewed when the sash sags and scrapes against the outer frame, and handles are swapped when the mechanism jams or the lock no longer engages. Pressure cams are adjusted or renewed to restore an even pull along the moving leaf, while locking points are checked so the sash presses in evenly on all sides. Stay arms and corner drives are inspected for wear first, since a fresh component rarely shares fixing centres with an older line.

How a pvc window repair visit runs from first message to handover

From the first message to the moment the window is handed back, the visit follows a clear sequence. Below is what happens at each step and how long it takes.

From your message to a booked visit

We reply on WhatsApp within five minutes, ask what the window is doing, and book a free measuring visit at a time that suits you, seven days a week. The measurer takes exact sizes, checks the profile and helps you choose the sealing strip, hardware and fixings — the consultation costs nothing and commits you to nothing. Describing the symptom in your opening message, rather than just asking for a price, lets the fitter bring the likely parts and often finish the job on the first call. A short video of the sash sticking or the draught coming through tells us more than a paragraph, so send one if you can. This is how a pvc window repair kokshetau visit begins, with a clear plan before any work starts.

What the fitter does on site and how long it takes

  • Diagnosis: the fitter checks the weatherstripping, hardware and glass unit against the symptom you described, then names the cause.
  • Parts confirmed: the right components are matched to your profile before work starts, so the sash is not left open.
  • Repair: adjustment, seal replacement or unit swap is carried out on the spot where possible, with the price fixed in the order after measuring.
  • Handover: you check the window closes and seals, then pay after installation by cash, card or Kaspi.

Warranty, timing and how to spot a reliable fitter

Kokshetau's listings are crowded with classified ads, and telling a direct fitter from a middleman is harder than it looks. Here is what to check and what the paperwork actually covers.

What the warranty covers and what it does not

We give a one-year warranty on window repair covering both labour and the parts we replaced, and a three-year warranty on glass unit replacement. Each repair carries its own record, so a seal swap and a hardware change are documented separately rather than lumped into one line. Glass units sit apart from repair work because the sealed chamber is a factory component rather than something assembled on site, and that is why the cover runs longer. The warranty is only as good as the record behind it, so keep the order that lists every item fitted; that is what a claim is checked against later.

Telling a direct fitter from a broker

  • Own team: the company that quotes your repair is the same one that sends the technician to your door.
  • Named parts: the seal and hardware are specified to your profile, not left vague in the quote.
  • Written warranty: labour and replaced components are covered in writing before the work starts.
  • Payment after work: you settle up once the repair is finished and you have checked it yourself.
  • Reachable later: a direct fitter answers months afterwards, which matters when a claim comes up.

How the technician checks the repair result

A short recap of what decides the outcome of a window repair, so you can judge your own case and ask the right questions before booking.

  • Repair first: a window that only draughts or sticks is almost always fixable, since seals, hardware and glass units are all replaceable components.
  • Match the component: seals and fittings must suit the specific profile, and a universal strip often fails within a season.
  • Read the symptom: draught, a loose sash and fogging each point to a different cause and a different fix.
  • Check the fitter: a direct team names what it installs, hands over written cover and takes payment after the work.
  • Know the cover: labour and replaced components are guaranteed on a repair, while glass unit replacement carries its own separate term to confirm before booking.

Questions about PVC window repair in Kokshetau

Causes of failures, seals, double glazing, safety

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Why does a plastic window not close tightly and the handle spins?

Usually the hardware is to blame: a connecting rod has come off, a cam has broken, or the corner switch has worn out, so the sash does not pull tight. This is fixed by replacing the specific part, not the whole window — the technician will identify the fault during inspection.

02Will a universal window seal fit a Rehau, KBE, or VEKA window, or is a profile-specific one needed?

A universal seal often does not fit into the groove of a different profile, so for Rehau, KBE, VEKA, and Provedal a seal with the appropriate cross-section is selected. The technician brings the right option after inspection so the sash closes tightly.

03The double glazing has fogged up inside between the panes, so is it replaced separately or does the whole window need changing?

Fogging between the panes means the double glazing's seal is broken, and it can only be fixed by replacement. The frame and sash are left untouched — a new double glazing unit is installed if the profile itself is intact.

04How long does it take to replace the seal in a plastic window, and is it done in winter?

Replacing the seal on one sash usually takes a short time; the exact duration depends on the window and the scope of work. Work can be done in cold weather as long as there is no severe frost — the technician will advise during inspection.

05Can a restrictor or lock be fitted to the sash to stop a child from opening the window?

Yes, an opening restrictor or a key lock is installed on the sash, and this is done on site during repair. Such protection does not interfere with normal window operation, and it can be removed or fitted without replacing the hardware.

06What is included in plastic window repair besides the technician's work?

Repair includes the technician's work and the replaced components, and the scope and price are fixed in the order after inspection. The completed work and new parts are covered by a one-year warranty.

Reviews of PVC window repair in Kokshetau

5,0based on 97 reviews on platforms
All reviews