Technician holding a white window handle with a screwdriver in a living room
from 6 600 ₸ per apartmentService for all windows in one visit, technician visit within the cityCalculate

Window Maintenance in Kokshetau

Seasonal mode · winter/summer

Sash adjustment

Switching pressure to winter or summer mode, tightening sashes — from 3 000 ₸ per window

A technician with a hex key stands by an open window sash before adjustment
GoogleYandex MapsZoon

5,097 reviews on review sites

What window maintenance in Kokshetau includes

Adjustment, hardware lubrication, seal care and drainage cleaning extend the life of your windows

How the service works

Window service is scheduled care for hardware, seals and drainage channels. The technician checks sash pressure, lubricates moving parts, treats rubber with silicone and cleans drainage holes.

Service before the heating season helps prepare windows for temperature changes: hardware experiences extra load as materials expand and contract, and seals lose elasticity faster. Before the first cold weather, it is worth checking smooth sash movement, seal condition and drainage hole performance.

A technician wiping the window frame by the handle in a kitchen
from 6 600 ₸

service for all apartment windows in one visit

1 year

warranty on window repair and replaced components

5 minutes

WhatsApp response during working hours

5 services
AdjustmentLubricationSealDrainageHandle

How seasonal window care is performed

Switching pressure to winter or summer mode, tightening sashes and eliminating draughts

Serviced window in a study, one handle on the sash
  • 01Switching to winter mode

    Eccentrics on the pins are turned to increase sash pressure against the frame — the window closes more tightly.

  • 02Switching to summer mode

    Pressure is reduced so the seal is compressed less and stays elastic longer.

  • 03Sash tightening

    Hinge adjustment aligns the sash with the frame, removes sagging and catching when closing.

  • 04How the technician finds the source of draughts along the sash contour

    Where draughts most often come from: hinges, pins or glazing beads — the technician checks pressure along the contour and adjusts the pins; if the seal is worn, recommends replacement — ask the technician for the cost.

Types of window maintenance work

Five jobs a technician can do in one visit: from lubricating hardware to replacing a handle

Sash adjustment

Tightening and alignment

A technician with a hex key by an open window sash

Fixes sagging, sticking and loose pressure of the sash against the frame.

from 3 000 ₸

Hardware lubrication

Moving parts

A technician holds a small brush with silicone lubricant for cleaning the handle and hinge

Hinges, pins and handles are lubricated for smooth operation and corrosion protection.

from 1 250 ₸/sash

Seal

Silicone treatment

A technician holds a small sponge with silicone lubricant for treating the window seal

Silicone keeps the rubber elastic and prevents cracking.

from 750 ₸

Drainage

Channel cleaning

A technician holds a thin stiff wire for cleaning the drainage hole in the profile

Removes clogs from drainage holes so water does not stagnate.

from 10 000 ₸

Handle replacement

New handle

A technician holds a new white handle for a plastic window

Installs a new handle instead of a broken or loose one.

from 2 750 ₸

Window maintenance prices in Kokshetau

Cost of PVC window maintenance — per window, sash or linear metre

Type of workPrice
Full window serviceall work on one windowfrom 10 000₸ per window
Apartment window serviceservice for all windowsfrom 6 600₸ per apartment
Seasonal maintenance (winter/summer)mode switchfrom 3 000₸ per window
Hardware cleaning and lubricationlubrication of moving partsfrom 1 250₸ per sash
Seal cleaning and lubricationsilicone treatmentfrom 750₸ per linear metre
Basic sash adjustment during servicingtightening and alignmentfrom 3 000₸ per sash
Balcony door adjustmentpressure settingfrom 6 000₸ per unit
Winter ventilation installationgap ventilationfrom 7 600₸ per unit
Thermal imaging window inspectionheat loss detectionfrom 9 000₸ per job
Technician visit and inspectionwithout repair orderfrom 3 600₸ per job
Draught eliminationpressure adjustmentfrom 3 500₸ per sash
Window handle replacementnew handlefrom 2 750₸ per unit

Price is fixed in the order after measuringMeasuring and consultation — freePayment after installation: cash, card or Kaspi

Order service

Why customers order window care from us in Kokshetau

Facts about the company: warranty, visit, payment and working hours

Repair warranty1 year

What is covered by the service warranty and what is considered natural wear — what to clarify with the technician

Window installation warranty5 years

for installation work

Technician visitfree

in Almaty within the city — inspection and consultation

Paymentafter

cash, card or Kaspi

Working hoursno days off

daily, check the time for your city

Experiencesince 2012

we work across Kazakhstan

Coverage17 cities

of Kazakhstan, including Kokshetau

WhatsApp response5 minutes

during working hours

How window maintenance is carried out in Kokshetau

Four steps from request to checking the result

  1. A hand holds a smartphone with a dark screen next to a white PVC window
    01Request

    You leave a request

    Write on WhatsApp or call, describe the problem and choose a convenient time for the technician to visit.

  2. A tape measure measures the window opening, a hand holds the measuring tape by a white window
    02Diagnostics

    Technician inspects the windows

    Checks the pressure, hardware, seal and drainage, and makes a list of work.

  3. Hex keys and lubricant on a table
    03Work

    Performs the service

    Adjusts, lubricates, cleans and replaces worn parts if necessary.

  4. A serviced white window in a dining room, a table in the foreground
    04Check

    How to accept the work using the checklist

    What to check yourself after the visit: handle, sash, drainage, no rubbing.

Good to know

Window Maintenance in Kokshetau with a Free Measuring Visit

We handle window maintenance in Kokshetau as a direct contractor with our own fitters. We diagnose the window, adjust hardware, renew seals and swap glass units, then fix the price after a free measuring visit. You pay after the work is done, and repair carries a one-year warranty on labour and parts.

How Window Maintenance Helps You Read the Signs Your Window Is Asking for Service

A window rarely fails without warning — it gives signals weeks before the moving part stops closing properly. Here is what to notice before you call a fitter.

Why a Closed Window Still Lets in Cold Air

A draught through a shut leaf almost always traces back to a compressed seal, a panel that has dropped on its hinges, or hardware that no longer pulls the frame tight against the profile. The seal is the soft strip running around the edge; once it flattens, outdoor air and moisture pass straight through the gap, and condensation collects inside by morning. Dropped hinges tilt the movable part by a millimetre or two, so the locking points meet the profile unevenly and the unit loses its clamp. Run a sheet of paper between leaf and frame and pull it out — if it slides free, the pressure is gone and adjustment comes ahead of seal replacement.

When a Stiff Handle Means Adjustment, Not Replacement

We treat a handle that turns hard or jams as a hardware problem nine times out of ten, and our fitters adjust the panel position and locking points rather than push a new unit. The lever drives cams through the edge; when the movable part sits a fraction off level, those cams bite at an angle and the handle fights back. Turning it harder wears the mechanism instead of freeing it. A leaf that has dropped by even a couple of millimetres loads the cam unevenly, so the grip stiffens long before anything visibly breaks — catching it early keeps the repair to a simple adjustment. For window maintenance in Kokshetau, describe where the handle catches and whether the panel rubs the profile at the bottom.

What a Window Maintenance Visit Covers and How to Book One

A service visit follows a short, predictable chain of steps from first message to final payment. Here is how booking works and what the fitter does at your home.

From Your First Message to a Fixed Price

We reply on WhatsApp within five minutes, book a free measuring visit at a time that suits you, and the measurer takes sizes, checks the hardware and helps choose the fixings before the price is fixed in the order. The visit itself costs nothing, whether you go ahead or not. The measurer also inspects the profile and how the frame sits in the opening, since a shifted frame changes which gasket or fastener will hold. Because the figure is locked only after measuring, the sum you agree on the day already accounts for the real state of the unit — no surprise add-ons once work begins.

What the Fitter Actually Does on Site

  • Diagnosis first: the technician checks the panel, seal and hardware, then explains what is a simple adjustment and what needs a new part.
  • Hardware adjustment: hinges, strikers and the handle are re-aligned so the panel closes evenly without force.
  • Seal renewal: a flattened or cracked gasket is replaced on the spot, restoring the airtight line.
  • Glass unit check: if the pane is fogged or the spacer has failed, he confirms whether a swap is needed.
  • Pressure test: ask him to show the panel closing under pressure — a unit that passes rarely whistles through the first cold snap.

Seals and Hardware on Windows of Any Brand During Window Maintenance

Seals and fittings wear out faster than any other window part. We cover what genuinely gets replaced, what a careful owner can handle alone, and what is better left to a fitter.

Can You Replace the Seal Yourself

A patient homeowner can swap a seal on an accessible sash, but the job goes wrong when the groove is not cleaned or the wrong section is pressed in, and the sash then leaks worse than before. The strip sits in a groove along the frame and sash, and that groove has its own shape on every profile line. Scrape out the old grit with a soft brush and alcohol, cut the new length with a small overlap at the corners, and press it in evenly rather than stretching it. Skip cleaning and trapped dust stops the rubber from seating, so draughts return within weeks. The gasket must match the groove geometry of your profile, so buying a generic strip by eye is the most common reason a DIY replacement fails within a season.

Which Windows and Brands We Take On

Frame materials compared by wear points and usual replacements
Frame typeWhat we checkWhat is most often replaced
PlasticGroove geometry, corner tightnessGasket, handle mechanism
WoodenFrame moisture, timber movementSofter-grade gasket
AluminiumThermal expansion, clearancesGasket, re-tensioned fasteners
Any brandProfile material on siteSeal matched to the groove

Glass Units, Fogging and Same-Day Replacement

Mist between panes and a crack in the glass are different stories. Here is how to tell when a sealed unit must go and when a repair is enough.

Repair or Replace and How to Tell

Fog or condensation trapped between the panes means the sealed unit has lost its gas fill and cannot be repaired — only the glazing itself is replaced, while a faulty seal or hardware around it is a separate, cheaper fix. Such a unit is built from two or three panes with air or gas chambers between them, and once that sandwich is breached, moisture enters the cavity and stays there. Condensation on the room-side surface is normal in cold weather and points to humidity, not a failed pane, so check which side of the glass fogs. Run a finger across it: if the mist sits on the inside, the part is finished; if it clears, ventilate the room and watch the seals.

How Fast a New Glass Unit Can Go In

We can make and fit a replacement within a single day when you need it urgently, and every glazing panel we install carries a three-year warranty. The urgent route carries a surcharge on the part itself, so ask for it the moment a crack appears rather than after the first frost — a broken pane in Kokshetau loses heat fast. Standard orders follow the measuring visit, where the fitter confirms the chamber layout and frame profile before anything is cut. A panel misted for months usually lets the frame collect moisture too, so have the seal checked on the same visit rather than waiting for the next cold spell.

Getting Windows Ready for a Kokshetau Winter

Sharp temperature swings and steppe wind test every window each winter. A short round of checks before the first frost keeps the frame dry and the opening tight.

A Short Checklist Before the Cold Sets In

  • Seal: run a finger along the rubber and check for cracks, flattening or gaps at the corners.
  • Closure pressure: trap a sheet of paper in the opening and pull it out — if it slides freely, adjust the hardware.
  • Drainage channels: clear the slots under the leaf with a thin brush so meltwater drains outside.
  • Hardware: book one adjustment a year, because a leaf that stops pressing evenly loses heat.

Can Windows Be Serviced in Winter

We service and repair them through winter, and our fitters work seven days a week, so a January draught need not wait for spring. Adjustment, hardware replacement and new sealing strip are all done on site, with the same one-year warranty on labour and replaced parts as any repair we carry out. Seal replacement in freezing weather requires the frame warmed and dried first, so a winter visit often starts with a profile check rather than the new strip. Keep the room heated and the area around the opening clear on the day of the call, and the fitter can dry the rebate and fit the strip in one pass.

Warranty, Payment and What You Get in Writing

Three things stay with you when the fitter leaves: a written guarantee, a fixed price already agreed, and a sheet listing exactly what was done.

What Our Warranty Covers

Cover periods broken down by type of work
Type of workCover periodWhat it covers
Window repair1 yearLabour and replaced parts
Glass unit replacement3 yearsThe new unit itself
Window installation5 yearsFitting and fixing
Mosquito screens1 yearFrame, mesh and fixings

Paying Once the Work Is Done

You settle the bill when the job is finished, by cash, card or Kaspi, and the figure agreed at measuring is the figure on your copy. We take no deposit before the visit and add no charges on the day. What the measurer writes down stays fixed once the order is placed, whatever the fitter finds behind the frame. Paying only after the specialist has shown you the adjusted sash and the new seal means any issue is caught while the tools are still out, not later when the van has left. Ask for your copy of the sheet before you pay — it is the same paper the warranty claim is checked against later.

Regular window servicing for ongoing care

A sash that still closes but no longer holds warmth is usually a service case, not a replacement case. The short list below collects the points that decide the outcome.

  • Draught through a shut sash: worn seal or lost pressure, not a dead unit — both adjustable and replaceable.
  • Free measuring visit: fitter takes sizes and price is fixed in the order before work starts.
  • Seals and hardware: replaceable on plastic, wood and aluminium frames alike, whichever brand made them.
  • Fog between panes: moisture inside means a new unit, since the sealed cavity cannot be dried out.
  • Pre-winter check: seal, pressure and drainage inspected before the cold saves the largest repair bills.

Questions about window maintenance in Kokshetau

Service, frequency, seal, window repair and replacement

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01What does PVC window servicing include and how is it different from a simple adjustment?

Window servicing includes cleaning and lubricating the hardware and seal, tightening the sashes and checking the compression along the entire perimeter. Adjustment only tunes the sash, while servicing also extends the window's lifespan.

02How often should plastic windows be serviced to keep them from starting to draft?

One technician visit per year is enough, preferably before the heating season. If the window is in the kitchen or opened often, it's worth checking the hardware and seal more frequently — it depends on the load on the window.

03How can you tell when it's time to replace the seal rather than just tighten the sash?

If the rubber feels hard, has cracks or doesn't spring back after pressing, tightening won't help — a new seal is needed. When the contour is intact but there's a draft from under the sash, adjusting the compression is usually enough.

04Can one technician visit cover adjusting the sash, replacing the seal and replacing the double glazing?

The technician performs adjustment and seal replacement on site. Double glazing of the required size is manufactured separately, so it's best to mention it when placing the request — timelines depend on the window and its dimensions.

05Do you service windows from other manufacturers, such as KBE, Rehau, VEKA or Provedal?

Yes, we provide window servicing for structures from any manufacturer, including these profiles, as well as for wooden and aluminium windows. We replace seals on windows of any brand.

06How can you tell when a window can no longer be repaired and needs full replacement?

If the profile is cracked, the frame geometry is distorted or the window freezes over its entire area, adjustment and seal replacement won't help. During the inspection, the technician will advise what's best in your case — repair or a new window.

Reviews of window maintenance in Kokshetau

5,0based on 97 reviews on platforms
All reviews