Technician holding a white window handle with a lock in a home office
from 3 400 ₸ per itemWe'll select and install a lockable handle in one visitCalculate

Lockable Window Handles in Kokshetau

Child protection · key

Handle with key

Blocks sash rotation, key stored separately. Price from 3 650 ₸ per item.

A craftsman stands by a closed white window in a bright room
GoogleYandex MapsZoon

5,097 reviews on review sites

What is a lockable window handle in Kokshetau

Locking hardware prevents turning the handle without a key or pressing a button, thus limiting sash opening.

How it works

A key-operated handle is designed like a regular turn handle, but a cylinder lock is inside the body. Until the key is turned, the handle doesn't rotate and the sash stays closed. The key is removed and the window is locked.

A button handle works without a key: to turn it, you must simultaneously press the button on the body. A double-sided handle is installed on a balcony door and allows closing it from outside. All options are compatible with plastic, wooden and aluminium windows.

PVC window with a key lock at the bottom of the sash and a clear grille behind the glass
from 3 650 ₸

price of key-operated handle per item

1 visit

installation in one technician visit

1 year

warranty on work and components

4 options
With keyWith buttonDouble-sidedOffice

How a key-lock handle is mounted in Kokshetau

The handle is attached to the sash through the profile's mounting seat; matching the center-to-center distance and pin type is important.

White window handle with a key lock in its base, close-up
  • 01Mounting size

    The handle fits into the profile seat with a specific distance between fixing points. A size mismatch won't allow fixing it without modification.

  • 02Pin and square

    A square pin runs inside the handle and engages the sash mechanism. A pin that's too short or too long prevents locking.

  • 03Profile compatibility

    For plastic, wooden and aluminium windows, a specific handle series is selected. The measurer checks the profile and selects a suitable model.

  • 04Replacing broken or loose

    If the handle is loose or cracked, it's replaced: removal and installation of a new one — 2 750 ₸ per item. During replacement, the condition of the sash mechanism is checked.

Mesh types for key-operated window hardware in Kokshetau

Five versions for different tasks: child protection, balcony access, office rooms and rental apartments.

With key

Child protection

A craftsman stands by a closed white window in a bright room

Blocks sash rotation, key stored separately. Suitable for apartments with small children.

from 3 650 ₸/item

With button

No key

A craftsman holds a white handle with a button in his hand explaining how the lock works

Turns only when button is pressed. Convenient when you don't want to lose a key.

from 3 400 ₸/item

Double-sided

Balcony door

White handle with a lock on a balcony door, a hand on the lever

Allows locking the door from outside and inside. Fits on a balcony unit.

from 30 000 ₸/pc

Office

Shared access

Brown lockable handle on a wood-effect window

Keyed handles for offices: the responsible person keeps the key, windows stay closed.

from 3 650 ₸/pc

Children's room

Rented apartment

A white window with one handle in a bright corridor

Replacing a standard handle with a lockable model without altering the profile.

from 2 750 ₸/pc

Lockable window handle prices in Kokshetau

Prices for handles, replacement and extra security elements; the exact amount is confirmed after measuring.

Type of itemPrice
Window handle with keywith lock, key-operatedfrom 3 650₸ per item
Window handle replacementremoval and installationfrom 2 750₸ per item
Double-sided handle for balcony doorfor closing from outsidefrom 30 000₸ per item
Window handle (product)standard versionfrom 3 400₸ per item
Door handle replacementbalcony unitfrom 3 500₸ per item
Handle rotation blockersecures the sashfrom 2 800₸ per item
Penkid lock with cableadditional protectionfrom 2 150₸ per item
Comb limiter with installationinstallation includedfrom 1 050₸ per item
Installation of blocker or child locktechnician's workfrom 2 750₸ per item
Installation of balcony latchtechnician's workfrom 3 750₸ per item

Price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi

Book a measuring visit

Why customers order locking handles from us in Kokshetau

Company facts: warranty, free measuring, payment after installation and service geography.

Warranty on work1 year

for window repair and replaced components

Measuring and consultation0 ₸

the measurer will come at a convenient time

Payment after installation3 ways

cash, card or Kaspi

Geography17 cities

available to order in Kazakhstan

WhatsApp response5 minutes

to a message during working hours

Open seven days a weekdaily

09:00–22:00 in Almaty and Astana

Experiencesince 2012

we work across Kazakhstan

Own productionAlmaty

we make, deliver and install ourselves

How we make and install lockable window handles in Kokshetau

Four steps from request to checking the mechanism.

  1. A hand holds a phone by a white plastic window, ordering a locking handle
    015 minutes

    Request

    You write on WhatsApp, we reply within 5 minutes. We clarify the address and number of handles.

  2. A tape measure measures the opening of a white plastic window before installing a locking handle
    02free

    Measuring

    The measurer arrives at a convenient time, takes dimensions and checks the window profile.

  3. A hand reaches for a screwdriver on a workbench, next to a small white box and screws
    03selection

    Choosing a model

    We select a handle for the profile: keyed, push-button or double-sided. We agree on the price.

  4. Installed white handle with a lock on a plastic window sash
    04installation

    Installation

    The technician installs the handle and checks that the sash closes and the key turns.

Good to know

Lockable window handles in Kokshetau chosen and fitted by our craftsmen

We supply and fit lockable window handles in Kokshetau, matching each handle to your profile, sash side and opening mode. Our measurer visits free of charge, picks the handle and fixings, and our own fitters install it and adjust the sash. You pay after installation, and window repair carries a one-year warranty.

What a lockable handle changes about your window

A key-operated fitting looks like an ordinary one until you turn the small metal blank. The difference sits inside the mechanism, not in the shape of the hardware.

How a key-lock handle differs from a plain lever

A key-lock handle carries a small cylinder inside the rose that stops the lever from turning until the blank is inserted. Outwardly the grip, the base and the screw spacing match a standard window handle, so the swap takes minutes and leaves the leaf untouched. The cylinder is a compact brass or zinc block, and the key is a flat blank rather than a bulky padlock type. Turning it pushes a pin into the hub and blocks its rotation; pulling it out frees the grip again. Because the block sits on the lever rather than on the leaf, it still controls the same espagnolette, so nothing else has to change. Choose a model whose cylinder matches the depth of your rose, otherwise the blank will sit proud of the base and catch on curtains.

What the lock actually blocks and what it does not

The blank stops the lever from rotating, which keeps the espagnolette from releasing the leaf, but it does not add a second locking point or reinforce the frame. Anyone determined enough can still force a window leaf with a pry bar, and the product offers no resistance to glass breakage. What it does well is stop the everyday routes: a child reaching for it, a visitor opening a vent, a ground-floor sash being lifted from outside. Treat it as access control for everyday openings rather than as a burglar-proof barrier, and pair it with a restrictor if the sash must stay partly open for air. On a balcony door the same principle applies to the fitting, while the door leaf itself still relies on its own multipoint mechanism.

Matching lockable window handles to your profile and sash

The right choice depends on three things at once, the profile, the side the sash opens on and whether it tilts. Set out how each one narrows the choice.

Reading your profile, sash side and opening mode

Our measurer checks the profile, the hinge side and whether the sash is turn-only or turn-and-tilt before choosing the model, because a tilt position needs a product that clears the frame. Lockable window handles Kokshetau we select so that the grip matches the sash and does not foul the sill. A turn-and-tilt leaf swings down and inward, so the grip has to sit far enough from the rebate that it does not foul the sill when the leaf is tilted. Turn-only sashes accept a shorter grip, and balcony doors take a longer one for grip. The profile stamp inside the rebate names the system, Economy or Prestige on our door screens, and each system has its own spindle length and screw spacing. Photograph the old fitting and the profile stamp before the visit.

Which windows and doors a lockable handle suits

Frame types and the fixings each one takes
Frame or openingHandle type we fitFixing we choose
Plastic turn-and-tilt windowLockable lever with key cylinderScrews matched to the rose
Wooden windowLockable lever, longer spindleThrough-bolt where the frame allows
Aluminium windowSlim lockable leverShort screws into the profile
Balcony doorLockable lever, reinforced baseHeavier screws and a base plate
Vent sashCompact lockable leverPins or magnets per the sash

Keeping children away from an open sash

A child who can reach the grip will open a window. Compare the two ways to stop that, a lockable fitting and a separate child lock, and when each one fits.

A key-lock handle or a separate child lock

A key-lock fitting keeps the lever fixed whenever the key is out, while a child lock is a separate blocker that stops the window at a chosen gap, and the two can sit on the same window. This device secures the mechanism itself, so the leaf cannot be swung wide, but it does not limit how far it travels once the grip is turned. A child lock works the other way: it leaves the hardware free and clamps the opening to a fixed few centimetres, which keeps air moving without letting a small body through. In our practice the pair makes sense on rooms where a toddler plays alone, because the lockable fitting alone still allows a full opening. Keep the key out of reach on a hook rather than in the keyhole.

Where the handle goes on a balcony door or vent

On a balcony door we fit the lockable fitting at the same height as the old one so the family keeps the same reach, and on a vent we use a compact model that still locks. Matching the old height matters on a door, since adults and children have learned where the lever sits and a shifted position means fumbling for it in the dark. A vent leaves little room, so the compact model keeps the keyhole clear of the frame edge and the leaf still closes flush. A door fitting takes knocks from bags and elbows all day, so check that the cylinder still turns freely after the first weeks of use and grease it if it stiffens.

Repair or replace when a handle fails

A fitting that spins, sticks or snaps does not always mean a new part. Walk through the common faults and what each one usually needs.

Spinning, sticking or a lost key

A grip that spins freely usually means a worn square spindle or a loose fixing, one that sticks needs the cylinder cleaned, and a lost key means the cylinder is replaced rather than the whole fitting. A spindle that has rounded off its square end slips inside the follower, so the lever turns but the espagnolette does not move. Sticking is mostly grit and dried lubricant inside the cylinder, which a clean and a graphite spray free up without any new parts. When the key is gone, we swap the cylinder and keep the existing lever, base and colour. If the window stops closing tightly after a swap, the fault is often the espagnolette adjustment rather than the new part, so ask the fitter to check it before blaming the hardware.

When a fitter is needed and when a swap is enough

A straight swap of a working fitting for a locking one is a short job for our fitter, while a broken espagnolette or a damaged frame needs the window opened up and the mechanism repaired first. On a sound window the swap is a screwdriver job: two screws out, the new base in, the lever refitted and the lock tested twice. A window that drags, a fitting that turns but does not pull it in, or a corner that stays loose points to the espagnolette or the hinges, and that repair is priced as window repair with labour and replaced parts under a one-year warranty. Replacing only the lever never fixes a unit that no longer pulls tight, because it is the last link in a chain that runs from the hinge to the espagnolette.

The free measuring visit and the fitting itself

The process starts with sizes and ends with a working installation. Below is what the specialist does on site, how long the work takes, and how locks, payment and the warranty are handled.

What happens from the measuring visit to the fitted handle

Our specialist arrives at a time that suits you, takes the sizes, helps choose the model and fixings, and the fitter returns to install it, with the price fixed in the order after measuring. The measuring and consultation are free, and the specialist helps you choose the model and the locking action before deciding. He checks the profile, the sash side and the opening mode, then writes the model, the spindle length and the fastenings into the order so the fitter arrives with the right parts. A swap itself is a short job once the part is in hand. Ask the specialist to test the old unit in front of you, because a fitting that already spins tells the fitter to bring a spindle as well as the new part.

Keys, payment and the warranty on the work

Each product comes with its own key, you pay after installation by cash, card or Kaspi, and window repair carries a one-year warranty on labour and replaced parts. We fit the part, check that the lock engages and the sash closes cleanly, and only then take payment. If you have several windows, we hand over the set window by window and show you which one turns which lock. Our team replies on WhatsApp within five minutes if a question comes up after the appointment, and we are open seven days a week. Keep the spare key labelled with the room name, so a later replacement is quick to order.

What to check before replacing lockable window handles

Five points carry the decision: what the mechanism controls, how to match it to the sash, which type fits the room, when repair beats replacement, and how the work is priced and closed out.

  • The mechanism controls the lever, not the frame: a key-operated fitting stops the lever from turning, so it governs access to the sash while the profile and glass stay as they are.
  • Match before buying: the right model depends on the profile, the hinge side and whether the sash tilts, so measure the existing fitting and spindle before ordering.
  • Two devices, two jobs: a key-operated fitting and a separate child safety device solve different problems and can sit on the same window without conflicting.
  • Diagnose before replacing: a spinning or sticking lever is usually a worn spindle or a loose adjustment, not a failed mechanism.
  • Close the loop: fix the price after measuring, pay once the lever turns freely, and label each key by window so a spare is never a mystery.

Questions about lockable window handles in Kokshetau

Installation, compatibility, fixing, technician visit

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can I install a handle with a lock on a plastic window if there was no lock before?

Yes, if the mounting size and spindle match your hardware. The lock is built into the handle itself, so no separate lock on the frame is needed. The surveyor will check compatibility free of charge.

02How can I tell if a window handle with a lock will fit my profile without removing the old one?

You just need to know the hardware brand, the distance between the fixing screws, and the spindle length. Often the marking is on the handle itself or on the sash. If there is no data, the surveyor will determine compatibility on site.

03Can I install a window handle with a lock on a window that previously had a regular latch?

Yes, the latch is simply removed and a handle with a lock is installed in its place if the fixings match. Sometimes extra holes remain; they are carefully covered or a model with a suitable plate is chosen. The technician will advise what exactly fits after measuring.

04What should I do if the window already has a hole for a handle, but the new handle with a lock does not fit the fixing?

Do not drill the profile yourself, as this can damage the reinforcement and airtightness. Choose a model with a suitable centre-to-centre distance or an adapter plate; the technician does this after measuring. Sometimes it is easier to keep the old fixing and install a blocker.

05Is a window handle with a lock suitable for a balcony door and a loggia window?

Yes, for balcony doors there are double-sided handles with a key to lock the sash both inside and outside. For a loggia, it is important to consider the profile thickness and the opening side. The specific model will be selected after measuring.

06How long does it take to replace a window handle with a lock, and does the technician come to your home in Kokshetau?

Replacement is straightforward if the fixing matches the mounting point. The technician comes to your home after a request and measurement; measurement and consultation are free. The exact visit time is agreed upon booking.

Reviews of lockable window handles in Kokshetau

5,0based on 97 reviews on platforms
All reviews