Hardware replacement
We replace hinges, handles, bolts and locking mechanisms on wooden frames. Price from 1 150 ₸ per hardware item.


Hardware replacement
We replace hinges, handles, bolts and locking mechanisms on wooden frames. Price from 1 150 ₸ per hardware item.

Glass replacement
We fit new glass and secure it with beading around the perimeter. Price from 8 000 ₸ per m² including glass and installation.

Swedish insulation
We seal the rebate around the perimeter so draughts don't come through the gaps. Price from 4 200 ₸ per linear metre of the perimeter.

Window painting
We sand the surface, prime it and apply a coating to one sash. Price from 8 100 ₸ per window.

Frame repair
We fit the sash, align any skew and replace a section of wood. Price agreed after inspection.

5,097 reviews on review sites
Restoring the frame, sash, glass and hardware without replacing the whole window
A wooden window consists of a frame, sash, beading, glass and hardware. The frame holds the geometry of the opening, the sash opens on hinges, the beading holds the glass in place, and handles and bolts lock the rebate.
Wood absorbs and releases moisture, so its dimensions change from season to season. As a result, the sash can swell, hinges can sag and paint can crack. Repair returns the components to working order.

Warranty on window repair: work and replaced components
Measuring and master consultation on site
We take requests every day of the week
The components that most often need repair, and what we do with them on site

Sagging hinges cause the sash to skew. They are adjusted to fit or replaced with new ones matched to the sash weight.
Locking mechanisms loosen over time and stop pressing the sash shut. Worn parts are replaced and operation is checked.
The glazing bead presses the glass against the rebate. If it has fallen out or cracked, the glass no longer stays in place, so the bead is reinstalled.
We replace hinges, handles and espagnolettes on wooden frames. Please ask the technician for the price per hardware item.
Five types of work with 'from' prices: from small hardware to insulation around the rebate
Hinges, handles, espagnolettes

We replace worn parts and check how the locking mechanisms move on the sash.
Broken or cracked

We fit new glass to the rebate size and secure it with glazing bead around the perimeter.
Fallen out or cracked

We put the bead back in place or fit a new one so the glass stays in the frame.
Swollen, won't close

We level the skew and adjust the sash to the opening so it closes tightly.
Swedish technology

We seal the rebate around the perimeter so cold air doesn't blow through frame gaps.
Price list for wooden window work with units of measurement and order notes
| Type of work | Price |
|---|---|
| Wooden window restorationsanding and painting | from 18 000₸ per m² |
| Wooden window paintingone sash | from 8 100₸ per window |
| Wooden window frame repairpriced by scope after inspection | from 16 000₸ per job |
| Wooden window repair and insulationinsulation around the perimeter | from 28 000₸ per window |
| Wooden balcony block repairwhole block | from 53 500₸ per unit |
| Wooden window hardware replacementper hardware item | from 1 150₸ per unit |
| Wooden window insulation using Swedish technologyaround the rebate perimeter | from 4 200₸ per linear metre |
| Inter-frame seal installationaround the frame perimeter | from 2 800₸ per window |
| Broken glass replacementglass and installation | from 8 000₸ per m² |
| Master visit and inspectionwithout ordering a repair | from 3 600₸ per job |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi
Ask about repair costFacts about our work: warranty, measuring, schedule and payment procedure
For window repair work and replaced components
Requests are accepted daily from 09:00 to 22:00
We accept requests every day of the week
Cash, card or Kaspi upon installation
Own production and profile painting in any colour to match the windows
We reply to messages within five minutes
We work across Kazakhstan
You can order in 17 cities of Kazakhstan
Four steps from request to checking the window together with the owner

Describe the problem in a message or by phone. We agree on a convenient day and time for the technician's visit.

The technician inspects the frame, sash and hardware, takes measurements and explains what needs to be done.

We carry out the agreed scope: hardware, glass, glazing bead, sash adjustment or rebate insulation.

The technician records the list of work, units of measurement and final cost in the order so you can see what you are paying for.
Good to know
Wooden window repair in Taldykorgan is done by our own crew, not a middleman. We fix sagging sashes, replace perished seals, restore frames and fit made-to-measure mosquito screens on wooden profiles. Measuring and consultation are free, the price is fixed after measuring, and repair work carries a 1-year warranty.
A wooden window often comes back to life more easily than owners expect. The decision rests on the condition of the wood, the geometry of the sash and the state of the glass unit, not on how old it looks.
We repair such a unit when the wood is sound and only the moving parts and seals have worn out. Sash adjustment, new weatherstripping and refinishing bring a tired frame back to a draught-free state without touching the joinery. Our crew strips old paint, sands the profiles down to clean wood and repaints them to the original shade, so the window keeps the look that belongs to the building. Repair also covers loose hinges, worn handles and sagging sashes that no longer meet the rebate evenly. A unit repainted many times usually hides good wood underneath, and stripping and refinishing preserves the original proportions and glazing bars. For wooden window repair in Taldykorgan, the same visit confirms whether the wood is worth saving. Before any work, ask for the free measuring visit: the measurer confirms whether the wood is worth saving and fixes the scope in the order.
A draught around the perimeter almost always comes from a dried-out seal and sashes that have drifted apart, not from the frame itself. We show how we find the cause and what we do about it.
We trace a draught to one of three places — the seal line, the sash gap or the glass rebate — before touching anything. Timber moves with the seasons: the seal flattens and hardens, hinges settle, and a hairline gap opens along one edge while the rest of the sash still sits tight. On site we run a hand and a thin strip of paper along the frame, check the hinges for play and look at the rebate where the glass meets the wood. We replace the seal in windows from any manufacturer, whether the profile is KBE, Rehau, VEKA or Provedal, and adjust the sashes so they close evenly again. A candle or a strip of paper run slowly round the frame on a windy day shows the exact leak point, which saves replacing a whole seal when only one corner has failed.
We renew the seal, adjust the sashes so they press evenly and close the gaps that let warm air escape and condensation form. The work starts at the seal line, because that is where most heat leaves a timber window: we pull the old gasket, clean the groove and fit a new one that compresses along its full length. Hinges and locking points are set so the sash pulls in square, not just at the handle side. On the colder nights this city sees, a gap of a millimetre is enough to feel on the back of your hand. Condensation on the glass often points to a failed seal line, so renewing the seal stops the wet frame as well as the draught.
A mesh panel sits on timber as securely as on plastic when the fixing matches the profile and the floor. Here is how we choose the cloth and the fasteners.
| Mesh | Best for | Key property |
|---|---|---|
| Fiberglass (standard) | everyday use | fire and temperature resistant |
| Ultravue | bright rooms | 25% more light and air |
| Pet Screen | homes with a cat | vinyl threads hold a small animal's weight |
| Anti-dust | dusty streets | fine weave traps dust |
| Poll-Tex | allergy season | 0.25×1 mm cell blocks pollen |
| Metal or Krylo | heavy use | rigid, long-lasting weave |
The measurer picks Z-brackets, plunger pins or magnets to suit your profile and floor, and a framed screen made to size takes 10–15 minutes. Plunger pins leave the cleanest face on a flat sash, Z-brackets carry a heavier unit on a deep rebate, and magnets suit sashes you open often. We paint the surrounding border any colour to match your windows, and the framed version lifts out from inside in a minute, so it can come off for the winter. On aged timber the fixing choice matters more than the mesh, because a bracket that does not sit flat will work loose within a season.
The job starts with a free measuring visit, where the measurer takes exact sizes and helps pick the design and fixings. Below is what happens on the day and how timing and payment work.
The measurer comes at a time that suits you, records the exact dimensions, checks the frame and helps choose the design, mesh and fixings, all free of charge. He looks at the profile, the seal line and the hinges, and notes where the sash sits unevenly or where draught gets through. On timber the fastening choice matters most: Z-brackets, plungers or magnets are picked for the profile and the floor, so a screen holds firm and still opens freely. You can also ask about painting the frame to match your windows. Have the window clear and the room accessible before the visit, since the measurer needs to open the sash fully to judge the seal line and hinge wear.
We work seven days a week, reply on WhatsApp within 5 minutes, and you pay after installation by cash, card or Kaspi. The price is fixed in the order once measuring is done, so nothing changes on the day of the work. A framed screen made to your size takes 10–15 minutes, a pleated one 40–60 minutes. Weekend slots are open too, so you can book a time that suits you. If you are weighing up the window repair Taldykorgan homeowners ask for most often, the same visit covers both the screen and the frame check. The measurer also notes the condition of the seal line and hinges while he is there, so the order lists every item in one go and no second trip is needed.
Once the work is finished, two things decide how long the window serves: what the warranty actually covers and how the timber and the mesh are looked after through the seasons.
A repaired timber window lasts for years if the gaskets are kept clean and the wood never sits in water. Wipe the seals twice a season with a damp cloth, clear the drainage slots on the sill, and repaint exposed surfaces before the autumn rains rather than after them. A framed screen comes away from the inside in a minute, and taking it down before the cold keeps the mesh from stiffening and stops ice collecting in the corners. Fibreglass and Poll-Tex canvases handle temperature swings well, yet a unit left up all winter traps snow against the glass. A screen stored flat in a dry room comes back in spring without a bent corner.
A window rarely needs replacing outright — most problems come down to seals, sashes and fixings that can be put right. Here is the short version to keep in mind.
Wooden window repair, adjustment, double glazing, insulation
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionMost often such a window is repaired: the seal is replaced, the sashes and hardware are restored, and insulation is done on site. Replacement is needed only if the frame geometry is compromised or the wood has rotted through — the technician determines this during inspection.
If the sash is intact and drafts are due to misalignment or a worn seal, adjusting the hinges and replacing the seal is enough. When the wood has dried out or the hardware is broken, more serious repair is needed — this is visible during inspection.
Yes, if the frame and glazing beads are in good condition, the old glass is replaced with a double glazing unit — the window becomes warmer and quieter. The possibility depends on the frame condition and rebate depth, so the technician first checks the window.
Measuring and consultation are free, and they are also needed for seal replacement: the technician will select a suitable profile based on the sash thickness. Without this, the new seal may not provide a tight fit.
Usually the frame is sanded, cracks are repaired, glazing beads are replaced if necessary, and it is repainted. The scope of work depends on the depth of wood damage, so it is determined after inspecting the window.
Yes, without replacing the window, insulation is done with a seal, sash adjustment, and, if necessary, the Swedish technology. This reduces drafts and freezing, but the result depends on the condition of the frame and glass.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp