Technician holding a white PVC window sash in a bedroom
Installation from 1 800 ₸ per m²Standard installation — 4 650 ₸ per m², to GOST with seam insulation — 5 200 ₸ per m². Measuring is free, the price is fixed in the order.Calculate

PVC Window Installation in Taldykorgan

Kitchen · PVC profile

Single-leaf

Single-leaf PVC window with manufacture and installation — from 42 500 ₸ per window. Suitable for kitchens and small openings.

Hands holding a triple-glazed unit sample with a grey spacer frame: window noise insulation
GoogleYandex MapsZoon

5,097 reviews on review sites

What is PVC window installation in Taldykorgan

Window replacement means removing the old frame, installing a new structure, window sill, drip and reveals. The installation warranty is 5 years.

How the service works

Window replacement includes removal of the old frame with the structure taken out, installation of a new profile with double glazing, and fitting of the window sill, drip and reveals. Every joint is sealed so that the seam does not freeze.

Besides the frame itself, the service includes the window sill, drip, reveals and sealing of the installation seam. The window sill is selected by the width and depth of the opening, the drip protects the seam from rain and snow outside, the reveals cover the ends of the opening and insulate the joint, and seam sealing includes vapour insulation inside and waterproofing outside. The window installation warranty is 5 years.

New white PVC window in a bare wall opening, the joint at the wall filled with mounting foam
5 years

warranty on window installation under the contract

0 ₸

measuring and consultation by the surveyor on site

from 4 650 ₸

window installation per m², standard

Window types
PVC profileWoodenBalcony blockDouble glazingTurnkey

How PVC window fitting is performed in Taldykorgan

The frame is fixed with anchors through the mounting holes, and the seam is filled with foam with vapour and waterproofing. If a seam freezes after someone else's installation, we reinstall to GOST.

Close-up of the installation joint: cured foam between the white PVC frame and the concrete opening
  • 01Anchor fixing

    The frame is fixed with anchors through the mounting holes in the profile — the fixing holds the structure in the opening.

  • 02Vapour insulation of the seam

    From the inside, the seam is covered with a vapour barrier tape to keep moisture from the room out of the insulation.

  • 03Waterproofing outside

    On the outside, a waterproofing tape and sealant are applied: the seam is protected from rain and wind.

  • 04Reinstallation to GOST

    If the seam freezes after someone else's installation, we redo the joint to GOST — from 5 200 ₸ per m² with seam insulation.

Types of PVC windows for flats in Taldykorgan

Five design options with price per window: single-sash, double-sash, balcony unit, turnkey window and double glazing replacement.

Single-sash

manufacture and installation

Technician holds a new white PVC window handle, showing the replacement

A compact window for the kitchen, bathroom or a small opening. The price includes manufacture and installation.

from 42 500 ₸

Double-sash

manufacture and installation

Hands holding a triple-glazed unit sample with a grey spacer frame: window noise insulation

Two sashes for the bedroom and living room, one of them usually tilt-and-turn. Installation is included in the price.

from 65 500 ₸

Balcony unit

window with door, per unit

Technician holding a white PVC profile for a bay window

A unit consisting of a window and a balcony door for access to a loggia or balcony. Manufacture and installation included.

from 95 500 ₸

Turnkey window

per m², with installation

A craftsman holds a white plastic window reveal panel for finishing in his hand

A plastic window with installation: manufacture, delivery and fitting in one item. Priced by area.

from 60 000 ₸

Double glazing

replacement, 3-year warranty

Technician fitting a white metal drip sill under a window during installation

We replace the double glazing without changing the frame, warranty on replacement — 3 years. Urgent replacement is available at a surcharge.

from 5 500 ₸/m²

PVC window installation prices in Taldykorgan

All window replacement work in one table: installation, dismantling, structures, window sill, drip rail, reveals and sealing.

Type of workPrice
Installation of a PVC windowstandard installationfrom 4 650₸ per m²
Window installation to GOSTwith vapour and waterproofing of the seamfrom 5 200₸ per m²
Dismantling of the old windowwith removal of the structurefrom 1 800₸ per m²
Single-leaf PVC windowmanufacture and installationfrom 42 500₸ per window
Double-leaf PVC windowmanufacture and installationfrom 65 500₸ per window
PVC window with installationturnkeyfrom 60 000₸ per m²
Balcony block with doormanufacture and installationfrom 95 500₸ per item
Installation of a PVC window sillwith cutting and fixingfrom 5 500₸ per linear metre
Installation of a window dripwith sealingfrom 3 250₸ per linear metre
PVC reveals (sandwich panels)with installationfrom 4 700₸ per linear metre
Reveals for a standard window, turnkeywith materialfrom 15 000₸ per window
Sealing of external seamswith materialfrom 2 000₸ per linear metre

The price is fixed in the order after measurementThe price list shows approximate rates per m² and per structure; the final scope of work is determined after measurementDismantling, reveals and drip rail are most often added to the basic installation

Book a free measuring visit

Why customers order PVC windows from us in Taldykorgan

Facts that matter when replacing windows: warranty, free measuring, price fixing and payment after installation.

Installation warranty5years

Warranty on window installation — 5 years under the contract.

Measurement0₸

Measurement and consultation are free, the surveyor will come at a convenient time.

Price fixingaftermeasurement

The price is fixed in the order after measurement and does not change.

Paymentafterinstallation

Pay after installation: cash, card or Kaspi.

Schedulenodays off

We work without days off, we reply on WhatsApp within 5 minutes.

Profile colouranycolour

We will paint the profile to match your windows: white, brown, grey.

Coverage17 cities

You can order in 17 cities of Kazakhstan.

Double glazing3years

Warranty on double glazing replacement — 3 years.

How PVC window installation is carried out in Taldykorgan

Four steps from request to handover of the finished window

  1. A hand holds a smartphone with a dark screen by a white PVC window in a bright room
    01by agreement

    Request and measurement

    The request records the opening parameters and the chosen design, after which the order goes into production.

  2. A tape measure measures the opening of a white PVC window in a bright room with warm walls
    02by agreement

    Manufacture

    The structure is manufactured according to the measured dimensions. Production time and installation date are agreed when placing the order.

  3. A worker's hands work with the lower profile of a white PVC window frame on the sill
    03on installation day

    Dismantling and installation

    The old frame is dismantled with removal of the structure, a new one is installed, the seam is sealed, the window sill, drip rail and reveals are fitted.

  4. A finished white PVC window with a clean sill and reveals in a bright room
    04after work

    Handover and cleaning

    The technician checks the operation of the sashes and hardware, removes debris and hands over the site. Payment — after installation.

Good to know

PVC Window Installation in Taldykorgan from Our Own Crews

We handle pvc window installation taldykorgan homeowners can book directly with our own crews, not through a middleman. A free measuring visit comes first, the price is fixed in the order after measuring, and you pay only once the window is in. Every installation carries a 5-year warranty.

When a New Window Beats a Repair in PVC Window Installation

A draught or a fogged pane does not automatically mean a new window. The decision rests on the state of the existing structure, not on a single symptom, so the right starting point is diagnosis rather than a full swap.

Three signs the frame is still worth saving

We repair and adjust windows with a 1-year warranty on the work and replaced parts, so sound joinery rarely needs a full swap. A dropped leaf, a handle that no longer closes tight or a seal gone hard along the rebate are all fixable on the existing profile. We change the seal on windows of any manufacturer, whether the frame carries KBE, Rehau, VEKA or Provedal hardware, and re-hang the sashes so they meet the frame squarely again. Insulating the window follows the same logic: the gap is closed at the seal and the hinge line, not by ordering new frames. A draught usually traces back to a worn seal or a misaligned leaf, not the structure itself, so fixing the seal first tells you whether the window has life left before you spend on a swap.

When only the glass unit needs replacing

We replace a glass unit within a single day when needed, with a surcharge added to the glazing price and a 3-year warranty on the replacement, so a cracked or fogged pane does not mean a new window. The sealed glazing is the part that fails first: the desiccant saturates, moisture creeps between the panes and the view goes milky from the edge inward. We measure the opening, order a single- or double-chamber replacement to the same dimensions and swap it without touching the profile or the finish around it. Fog between the panes means the sealed glazing has failed, while fog on the room side is a ventilation issue, and the two look alike but call for different work. Checking which side the haze sits on saves you from paying for glass you did not need.

Repair, a new glass unit or a full swap side by side

Which fault maps to repair, glass swap or full replacement
What is wrongWhat we doWarranty
Seal worn, sash dropped, handle looseRepair and adjust the sash1 year
Cracked or fogged sealed unit, frame soundReplace the glass unit3 years
Frame warped, rot or repeated failureInstall new PVC windows5 years

How the Free Measuring Visit Sets the Size and the Fixing for PVC Window Installation

Measuring is not a case of running a tape along the frame and leaving. Size, fixing method and the final price are all settled here, which makes a mistake at this step the most expensive one to correct later.

What the measurer checks during the free visit

Our measurer comes at a time that suits you, takes the sizes, and helps you choose the profile, glass unit and fixings, and the visit costs nothing. The same appointment covers the reveal depth, the sill line and how the unit will sit against the surround, so the order is built on real dimensions rather than a rough sketch. We reply on WhatsApp within five minutes and work seven days a week, so a visit can be booked for the weekend. The price is fixed in the order after measuring, which means the figure you agree is the figure you pay. Ask the measurer to check the opening for level and square before anything is ordered — a slanted reveal changes the whole sizing, not just the trim.

Fixings chosen for your wall and floor

Which fixing suits each wall type
Wall or openingFixing we use
Solid concrete or brickFrame anchors into the reveal
Aerated block or hollow brickMounting plates to the inner face
Timber framePlates with through bolts
Thin or uneven revealPlates set back into the wall

Choosing a Profile, Glass Unit and Hardware for the Local Climate

Profile and glazing decide how well a window holds winter cold and summer heat; the hardware decides how it feels in daily use. Here is what actually shapes the choice.

Profile and glass unit that suit a Zhetysu winter and summer

A two-chamber glass unit holds warmth better in winter and blocks heat in summer than a single-chamber one, and the profile's chamber count matters as much as its brand. Zhetysu swings from hard frost to dry heat, so the gap between the panes and the air pockets inside the frame do the real work. A two-chamber glazing with low-emissivity glass slows warmth loss on the coldest nights and keeps the inner pane from fogging. Seals and gaskets close the joints between sash and profile; once they harden, cold air finds the gap regardless of how thick the plastic is. Extra chambers help only when the glazing is sealed and fitted tight — a top-tier profile set with gaps performs worse than a simpler one set well. Ask for the chamber count and the glazing build in writing before you sign.

Hardware and handles you actually touch

  • Hinges: carry the full weight of the sash, so ask for the load rating against your sash size.
  • Handles: the part most often gripped, so test the action and check the finish resists sun and frost.
  • Locking points: the more points a sash closes on, the tighter it pulls against the gasket.
  • Tilt-and-turn mechanism: lets the sash tilt for airing and turn for cleaning, and both modes should move without force.
  • Adjustment screws: every good hinge has them, letting a fitter re-align a sagging sash instead of replacing it.

How pvc window installation Runs on Site from Removal to Clean-Up

After the measuring visit and the fixed order, the work moves to your flat, where fitters protect floors and furniture, remove the old unit, and install the new frame, sashes and seals before clean-up.

The steps from old window out to new window in

  • Demolition: old sashes come out first, then the frame, and the gap is cleared of foam and anchors.
  • Fitting: the new window goes in, gets packed and levelled with wedges, then anchored to the wall.
  • Hanging: we hang the leaves, set the hardware and tune the pressure so each closes evenly.
  • Finishing: the reveal is closed and the board is fitted with a fall away from the interior.
  • Handover: the team cleans up, shows you the fittings and leaves the paperwork.

Slopes, sill and the finish that keeps draughts out

We finish the reveal with slopes and a sill as part of the job, and the seal around the frame is what keeps draughts from returning under the board. Foam goes into the joint in layers, not one thick pass, so it cures evenly and does not shrink away from the profile later. The board is set with a slight outward fall, sealed underneath and along both edges, and the panels are fixed so the joint between them and the frame stays closed. Gaps under a sill usually show up on the first cold night, not on handover day — check that joint before the team packs up. If you are planning a pvc window installation in Taldykorgan, this is the stage where the finish decides how warm the room stays.

Warranty, Payment and Protecting the Window After Fitting

Warranty terms and the payment order are what a buyer checks before placing an order. Here is what our installation warranty covers, when money changes hands and how to add window protection during the same visit.

What the 5-year warranty covers and when you pay

Every installation carries a 5-year warranty, the price is fixed in the order after measuring, and you pay after installation by cash, card or Kaspi. The installation warranty covers the fitting work itself, while replacement glass units carry a separate 3-year warranty and window repair covers labour and replaced parts for 1 year. We work seven days a week, so a fitting can be scheduled for a day off, and the price agreed at measuring does not change afterwards. Keep the order and the measuring sheet — the fixed price and the warranty both rest on those documents if a question comes up later.

Limiters, child locks and window guards added at fitting

Safety parts compared by their function on the sash
PartWhat it does
Opening limiterCaps how far the sash swings
Child lockBlocks the handle from small hands
Window guardFixed barrier across the opening
Sash stopHolds the sash at one position

What to consider when replacing a window in a panel building

Five decisions shape the result, and each one is cheaper to settle while the old frame is still in the wall than afterwards.

  • Repair first when the frame holds: sound windows with worn seals or tired hardware cost far less to restore than to swap, and the opening geometry stays intact.
  • A dead glass unit means a quick swap: urgent glazing is produced and fitted inside a single day, with a surcharge added to the glazing itself.
  • The free measuring visit settles everything: size, fixing type and the final figure get agreed on site, then locked into the order.
  • Tight fitting outranks specification: a mid-range profile sealed properly beats a premium system left with gaps, so judge crews by slopes and sealing.
  • Terms go into writing up front: the 5-year installation warranty and pay-after-fitting arrangement belong in the order prior to any work starting.

Questions about PVC window installation in Taldykorgan

Replacement, double glazing, profile, fitting

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01How can I tell if my uPVC window needs a full replacement rather than a repair?

If the profile or sashes are warped, cracks have appeared, and draughts persist after adjustment and new seals, the window is replaced entirely. When the geometry is intact, a repair is usually enough — replacing the hardware or the double glazing.

02When replacing windows, can I just replace the double glazing and keep the frame?

Yes, if the profile and sashes are intact, the double glazing can be replaced separately — it is faster than a full window replacement. We give a 3-year warranty on new double glazing, but if the frame geometry is compromised, the whole window must be replaced.

03Which double glazing is best for window replacement in Taldykorgan given the climate?

For the local climate with cold winters and hot summers, double-chamber double glazing with energy-saving coating and argon is suitable. It retains heat better in winter and protects against overheating in summer, but the choice depends on the window and budget.

04Can windows be replaced in winter without damaging the reveals?

Yes, windows can be replaced in winter if the fitters work quickly and the opening is insulated immediately. The reveals are not damaged if dismantling and installation proceed without delay — we work without days off in cold weather.

05Which profile should I choose for window replacement to avoid draughts?

For Taldykorgan, it is important to look not only at profile thickness but also at the number of chambers and the quality of seals. It is better to choose a profile with at least three chambers and two seal contours. The specific brand will be advised by the surveyor after inspection.

06Is there a lot of dirt and dust during window replacement and what should I cover in advance?

There is plenty of dust during dismantling, but the fitters collect the debris and clean up afterwards. It is better to cover furniture and the floor in the room with film in advance and take down the curtains.

07How does window replacement differ from balcony glazing?

Window replacement is the installation of a new unit into an existing opening, while balcony glazing includes frames around the entire perimeter and often cladding. These are different jobs both in scope and construction.

Reviews of PVC window installation in Taldykorgan

5,0based on 97 reviews on platforms
All reviews