Technician holding a white PVC frame with a glazing unit in a children's room
from 37 500 ₸ per m²Frames for your opening, mosquito screens and exterior cladding — all in one order at a fixed priceCalculate

Balcony and Loggia Glazing in Taldykorgan

Tall openings · Stalin-era

Loggia

We make frames to the actual size of the old opening. From 37 500 ₸ per m².

Glazed loggia with white plastic windows along its entire length
GoogleYandex MapsZoon

5,097 reviews on review sites

What balcony and loggia glazing in Taldykorgan includes

Frames are just the start — screens, cladding and a window sill are often added

What it consists of

First we choose the profile: lightweight sliding aluminium for a storage balcony or PVC with double glazing for a warm room. In Taldykorgan the wind from the mountains can be sharp, so we fit the sashes tightly and seal the joints.

Then it's up to you. In private houses near gardens, mosquito screens are almost always fitted; on old balconies the railing is clad outside; on high floors people ask for a wide window sill for flowers.

Balcony glazing design: white PVC frame with a double-glazed unit and an opening sash
from 37 500 ₸

frames per square metre

from 5 500 ₸

window sill per metre

free

measuring visit

5 services
FramesDrip sillScreensCladdingWindow sill

How loggia glazing is performed in Taldykorgan

Four typical stories

Anchor plate fastens the balcony PVC frame to the concrete parapet
  • 01Snow in the balcony corner

    An open balcony is not used at all in winter. Sliding frames bring it back into use.

  • 02Want a study

    PVC profile plus insulation make a warm room.

  • 03Wooden frames have dried out

    Removing the old frames and fitting new ones solves the draughts.

  • 04Too narrow

    Extending the glazing on brackets adds space.

Types of balcony glazing and extra works in Taldykorgan

We put together an order for your balcony

Frames per m²

Any opening

Hands measure a balcony parapet with a tape measure before glazing

For loggias, bay windows and corner balconies.

from 37 500 ₸/m²

Warm PVC

Double glazing

Warm glazing of a loggia with white PVC frames, double glazing and insulated walls

If the balcony becomes a room.

from 202 500 ₸

Screens

Sliding

A craftsman holds a sample of a mosquito net in a white frame for a balcony

No mosquitoes or wasps in summer.

from 17 400 ₸/m²

Cladding

Exterior corrugated sheet

Interior cladding of a glazed balcony with light wooden lining, balcony glazing

A neat look from the street.

from 73 000 ₸

Window sill

PVC

Wide windowsill under the windows of a glazed balcony, balcony glazing

A shelf for flowers and seedlings.

from 5 500 ₸/linear m

Balcony and loggia glazing prices in Taldykorgan

Guide prices for frames, screens, cladding and window sills, final quote after measuring

Type of workPrice
Cold balcony glazing (aluminium)sliding aluminium framesfrom 158 000₸ per balcony
Warm balcony glazing (PVC)PVC profile and double glazingfrom 202 500₸ per balcony
Balcony glazing, per m²calculated by opening areafrom 37 500₸ per m²
French (panoramic) glazingfloor-to-ceiling glassfrom 322 500₸ per balcony
Balcony extensionextended to the window sill linefrom 214 000₸ per balcony
Balcony roof or canopyfor upper floorsfrom 49 000₸ per balcony
Removal of old glazingframe removal and disposalfrom 5 000₸ per balcony
Exterior balcony claddingcorrugated sheet or sidingfrom 73 000₸ per balcony
Interior balcony insulationfor warm glazingfrom 6 800₸ per m²
PVC window sill installationinside the balconyfrom 5 500₸ per linear m
Sliding mosquito screen for balcony and loggiafor new framesfrom 17 400₸ per m²
Drip sill installationwater drainage from the framefrom 3 250₸ per linear m

The price does not change after measuringMeasuring is freePayment on completion: cash, card, Kaspi

Book a measuring visit

Why customers order loggia glazing from us in Taldykorgan

The way our clients are used to working

Experiencesince 2012

we work across Kazakhstan

Response5 minutes

on WhatsApp with a photo of the balcony

Visitfree

with samples

Amountone

the one in the order

Paymenton completion

after acceptance

Requests09:00–19:00

every day

All at onceone contractor

frames, screens, cladding

Network17

cities of Kazakhstan

How balcony and loggia glazing is carried out in Taldykorgan

A short order journey

  1. A hand holds a smartphone with a dark screen by the balcony window opening
    015 minutes

    Photo

    Take a photo of the balcony and describe what you need besides frames. We will reply quickly.

  2. A tape measure measures the balcony window opening white PVC frame balcony glazing
    02free

    Inspection

    The measurer measures every side, checks the slab and suggests a profile; the amount goes into the order.

  3. Hands assemble a white PVC balcony glazing frame with double glazing in a workshop
    03as scheduled

    Work

    We install the frames and drip sill, then the screens, cladding and windowsill.

  4. Finished warm glazing of the loggia with a row of white PVC frames
    04with you

    Check

    We open the sashes, check the seams, and only then payment.

Good to know

Balcony and Loggia Glazing in Taldykorgan

We handle balcony and loggia glazing in Taldykorgan with our own installers, a free measuring visit and a price fixed in the order after measuring. The measurer picks the construction, profile and fixings for your window and floor, and you pay only after installation. Window installation carries a 5-year warranty.

Warm or Cold Balcony and Loggia Glazing and What Fits Your Balcony

Two routes exist: an insulated section with a sealed glass unit, or a slim metal one. Your choice depends on how you plan to use the space and what the slab can carry.

Warm Glazing with PVC Profiles and Glass Units

  • Construction: warm balcony and loggia glazing taldykorgan pairs multi-chamber PVC sections with a sealed unit, so the room holds heat and muffles street noise.
  • Year-round use: the insulated sections turn the space into a study, a spare bedroom or a workshop that stays usable through the cold months.
  • Insulation first: we advise insulating the parapet and slab together with the new sections, since the work costs less in one pass.
  • Noise: a double-chamber unit cuts traffic rumble noticeably better than a single sheet in aluminium.
  • Weight: the sections and units are heavy, so the measurer checks the slab before confirming the system.

Cold Glazing on Aluminium and When It Is Enough

Cold glazing uses slim aluminium sections, often sliding, and keeps wind, rain and dust out without turning the loggia into a heated room. It suits a storage area, a drying space or a place for skis and tools, where nobody sits for hours in January. Sliding sashes take little space and open with one hand, which matters on a narrow loggia. Aluminium is far lighter than the warm alternative, so on older panel blocks and wooden structures it puts the least load on the slab and parapet, and that structural margin matters more than the small heat difference. Expect the profile itself to stay cold in frost: the alloy conducts temperature, so condensation forms on it in damp weather.

Matching the Construction to Your Building and Floor

Which system suits each house type and floor
Building and floorBest fitWhy
Panel block, upper floorsAluminium slidingLight load, low wind catch
Brick house, insulated parapetPVC with glass unitHolds heat, cuts noise
Wooden balconyAluminiumTolerates movement
Loggia used as an officePVC, opening leafVentilation and quiet
Ground floor, street sideEither systemDust and noise decide

How the Free Measuring Visit for Balcony and Loggia Glazing Sets Sizes and Fixings

The measuring visit costs nothing and commits you to nothing: the specialist takes exact sizes, asks about the building and the storey, and selects the fixing on the spot.

What the Measurer Checks and Asks

  • Convenient timing: our measurer arrives when it suits you and takes exact sizes, free of charge.
  • How you will use the space: storage, laundry or a study each needs a different frame depth and glass.
  • Parapet material: concrete, brick, timber or aluminium decides how the base is anchored.
  • Storey level: wind load rises with height, which changes the fastener that holds panels.
  • Openings: each sash, vent and doorway is measured separately to avoid corner gaps.
  • Existing glazing: old frames, sills and seals are checked before new panels go in.

Fixings Chosen for Your Window Profile and Floor

The measurer chooses the fixing to suit your window profile and floor rather than applying one universal method, picking Z-brackets, pins or magnets on site. Plastic, timber and aluminium frames each take a different anchor, and the same loggia on the second storey and on the ninth is not fastened identically. Wind pressure grows with height, so brackets that hold firmly near the ground may flex higher up. Our measurer checks the profile and storey during the visit and writes the chosen fixing into the order, so the installation team arrives with the right parts. Ask which fastener is planned for your level before work is scheduled — changing it after drilling means new holes in the profile.

When the Glazed Space Is Ready After Installation

  • Foam setting: mounting foam firms up within a few hours, but the space is best left for about a day.
  • Weather effect: warm dry air speeds curing and cold or damp conditions slow it down.
  • Seam check: the mounting seam between panel and wall is inspected once the foam has set.
  • Load after curing: heavy items and constant traffic wait until the foam has hardened.

Repair, Adjustment or Full Replacement of Balcony and Loggia Glazing

Draughts and condensation do not always mean the glazing has to be replaced. Often an adjustment, a fresh seal or one new glass unit restores the whole system.

Signs That Adjustment and a New Seal Will Do

  • Sash sagging: a leaf that drops or will not close flush usually needs the hardware realigned rather than replaced.
  • Draught at the edge: air slipping through the closing line points to a flattened gasket, not a failed frame.
  • Seal replacement: we change the gasket in windows from any manufacturer, including KBE, Rehau, VEKA and Provedal.
  • Hardware adjustment: we reset hinges and the closing mechanism so the leaf presses evenly again.
  • When to stop: if the frame is sound and only the closing line leaks, adjustment fixes it without new glazing.

When a Glass Unit or the Whole System Needs Replacing

  • Misted panes: moisture trapped between the panes means the sealed unit has failed and must be swapped.
  • Cracked pane: a chip or crack in one sheet is replaced as a single sealed unit, not the whole frame.
  • Urgent swap: we can make and fit a replacement sealed unit within one day for a surcharge.
  • Room-side moisture: water on the inner surface usually signals poor ventilation, so check airflow first.
  • Frost on the inner edge: ice along the frame often follows a failed gasket or a cold bridge.
  • Full replacement: only a distorted frame or repeated failure across several panes justifies a new system.

Comparing Repair Options at a Glance

Matching each symptom to the right repair work
SymptomLikely causeWork needed
Sash sags or sticksWorn hardwareAdjustment
Draught at the edgeFlattened gasketNew seal
Mist between panesFailed sealed unitUnit swap
Crack in one paneImpact damageUnit swap
Frost on inner edgeGasket or cold bridgeInspection first
Frame out of squareStructural movementFull replacement

Accepting the Work, Warranty and Payment

Acceptance is a short check of the sashes, seams and panes before the crew leaves. Warranty and payment order are agreed in advance, so nothing surprises you once the job is done.

How to Check the Installation Before You Sign Off

  • Every sash: open and close each one fully and listen for rubbing or scraping along the edge.
  • Level check: place a spirit level on the sill and head rail to confirm the construction sits square.
  • Foam seam: run a hand along the mounting seam and look for gaps or unpainted patches.
  • Glass panes: confirm no glazing is misted inside, which would point to a failed factory seal.

Warranty Terms for Installation, Glass Units and Repair

  • Installation: we give a 5-year warranty on window installation, covering the fit and fixing of the whole construction.
  • Glazing replacement: a new sealed unit carries a 3-year warranty against seal failure and internal misting.
  • Repair work: window repair is covered for 1 year, including both labour and the parts we replace.
  • What voids it: damage from a dropped object, unauthorised alteration or a removed sash falls outside the terms.

Fixing the Price and Paying After Installation

The price is fixed in the order after measuring, and you pay after installation by cash, card or Kaspi. The measuring visit itself costs nothing, and the figure agreed on paper stays the same once the crew starts on the loggia. If something extra turns up on site, we discuss it before touching anything and put the change into the order. Payment is taken once you have walked through the check above and are satisfied with the result. Fixing the price at the measuring stage protects you from later changes, so any addition is agreed in writing before it is done.

Permits, Winter Work and Limits Before You Glaze

Before you order, it helps to know whether the facade may be changed at all and whether work can go ahead in the cold. Both answers shape the schedule and sometimes the decision itself.

Approvals and Building Rules

Glazing that leaves the facade unchanged usually needs no approval, but some buildings and housing associations restrict any alteration to the outside look. A recessed loggia behind the existing railing rarely draws objections, while a unit whose new frames face the street may be treated as a change to the shared exterior. Rules differ from one building to the next, so the housing manager is the person who confirms what applies to your home. If your property falls under a restriction, the work can often be adjusted rather than abandoned — keeping the original railing line or choosing a frame colour that matches the existing windows usually settles the question.

Glazing in Cold Weather

  • Winter-grade foam: standard foam stops expanding below freezing, so we switch to a low-temperature grade that cures in frost.
  • Seal flexibility: gaskets stiffen in frost, so they are brought to room temperature and fitted without stretching.
  • Seven-day schedule: we work seven days a week, so a cold snap does not push your order to the next month.
  • Readiness: a winter installation may need a little longer before the room is fully usable, but the finished result is the same.

What to settle before you order balcony glazing

A glazed balcony is only as good as the decisions made before the first frame goes in. Here is what matters most, in the order it affects the result.

  • Warm versus cold: match the construction to how you use the space and what your slab can carry, not to the lowest quote.
  • Free measuring: the measurer sets exact sizes and picks Z-brackets, pins or magnets for your window profile and floor.
  • Repair before replacement: adjustment and a new seal often restore a system that looks ready for a full swap.
  • Fixed terms: warranty on installation, glass units and repair, plus payment after the work, are agreed and written into the order up front.

Questions about balcony and loggia glazing in Taldykorgan

Glazing without insulation, moisture, acceptance, approval

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can a balcony be glazed without insulation, and is it worth it?

Yes, cold glazing without insulation is often installed: it protects from wind, rain, dust and snow, but does not retain heat. If the balcony is not planned to be a living room, this option is usually sufficient.

02Why does moisture accumulate on the balcony after glazing, and what can be done about it?

Most often the cause is poor insulation, poor air flow, or clogged drainage holes in the profile. Check that ventilation and drains are not sealed, and ventilate the balcony regularly.

03How can I check that the balcony was glazed correctly during acceptance?

Open and close all sashes: they should move smoothly, without jamming, and the handles should click clearly. Inspect the seams and reveals for gaps, check for frame distortion and signs of moisture near the windowsill.

04What should I do if the sliding windows on the balcony start to jam?

First check if debris has got into the guides and wipe them, then lubricate the rollers. If the sash still moves stiffly, most likely the rollers or fixings are worn out and it is better to replace them.

05Do I need approval for balcony glazing, and what documents will be required?

In most cases, changing glazing without altering the facade is allowed, but in some buildings approval from the KSK or akimat is required. Check the rules for your building in advance so you don't have to redo it later.

06Can I order balcony glazing if the old frames are drafty around the perimeter?

Yes, you can: usually the old frames are removed and new ones installed, and if the profile is still strong, sometimes adjustment and seal replacement are enough. The free measuring visit will advise what is best in your case.

Reviews of balcony and loggia glazing in Taldykorgan

5,0based on 97 reviews on platforms
All reviews