Welded grille
Basic protection made of steel rods, price from 7 500 ₸ per m², installation to a prepared opening.


Welded grille
Basic protection made of steel rods, price from 7 500 ₸ per m², installation to a prepared opening.

Wrought-iron grille
Pattern with forged elements, price from 26 000 ₸ per m², suitable for street-facing windows.

Hinged leaf
Surcharge from 15 000 ₸ per leaf to the main structure, opens on hinges.

Removable grille
Fixed on anchors, price from 16 500 ₸ per m², can be removed when needed.

Decorative grille
Laser cutting to your sketch, price from 25 000 ₸ per m², design agreed before manufacturing.

5,097 reviews on review sites
A metal grille covers the opening from the outside: frame, rods and coating work as a single barrier against break-ins.
The grille consists of a steel frame sized to the opening and rods with a mesh: welded rods form a rigid grille, forged elements create the pattern. The coating protects the metal from moisture and temperature changes.
The welded design is simpler in pattern and lighter in weight, while the wrought-iron one is more decorative and heavier. Both are mounted outside the window and do not interfere with opening the leaf if the fixing is chosen for the profile.

price per m² for a standard welded grille
grille installation per m² to a prepared opening
price per m² for a wrought-iron grille with a pattern
Fixings are chosen for the wall material and window profile: anchors into the wall, hinges for the leaf, removable options for access.

The grille is fixed with anchors into the wall around the opening, not into the window profile — the leaf opens freely.
Part of the grille opens on hinges, a lock is installed in the leaf for access to the window from outside.
The structure can be removed when needed: convenient for seasonal access and window cleaning.
A lock and hatch in the protective structure provide access to the window from outside without dismantling: the hatch is cut into the sash, and the lock is installed on the opening part. When measuring, specify which side is convenient to open from and whether a service hatch is needed.
Cost depends on the design type, opening size, and surcharges for the sash, hatch, and lock.
| Type of item | Price |
|---|---|
| Standard welded window grillebasic option for first-floor windows | from 7 500₸ per m² |
| Wrought-iron grillepattern with forged elements | from 26 000₸ per m² |
| Blown (convex) grilleconvex shape for extra volume | from 26 500₸ per m² |
| Decorative laser-cut grillecustom design | from 25 000₸ per m² |
| Sliding accordion grillefolding design | from 28 000₸ per m² |
| Hinged grille leafsurcharge to the main structure | from 15 000₸ per leaf |
| Removable grille on anchorscan be removed when needed | from 16 500₸ per m² |
| Fire exit (hatch) in the grilleemergency hatch | from 15 000₸ per item |
| Lock installation in the grillelock for the hinged leaf | from 5 000₸ per item |
| Powder coating of the grillecoating renewal | from 5 500₸ per m² |
| Grille installationfitting to a prepared opening | from 4 500₸ per m² |
| Grille repair (welding, straightening)restoring geometry and welds | from 6 000₸ per job |
| Removal of old grilletaking down before replacement | from 4 000₸ per item |
Price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, or Kaspi
Book a measuring visitWe have been making mosquito screens since 2012, work without days off, and fix the price after measuring.
we work across Kazakhstan
for work and replaced components
measuring and consultation are free, the measurer will come at a convenient time
price is fixed in the order after measuring
payment after installation: cash, card, or Kaspi
we work without days off, respond on WhatsApp within 5 minutes
the price is fixed after measuring
you can order in 17 cities of Kazakhstan
From request to finished structure on the window — four steps.

You leave a request, we clarify the opening dimensions and a convenient time for measuring.

We approve the pattern and coating color before manufacturing.

We check the opening dimensions before welding and test-fit the frame.

We install the grille on the prepared site, and when replacing, we dismantle the old structure.
Good to know
We supply metal window grilles in Taldykorgan made to measure, with a free measuring visit, fixing chosen for your window profile and floor, and fitting by our own fitters. You choose the type for the job, we confirm the size on site, and you pay only after the grilles are up.
The grille type follows two things: what you need it to stop and what kind of window it sits on. Below is how the main options compare.
We fit stationary grilles for constant protection, hinged grilles that open for cleaning and access, and sliding grilles for balconies and wide openings. A stationary frame is welded shut, so the glass is washed through the bars with a long-handled brush. A hinged leaf swings out on its hinges and gives clear reach to the whole pane. A sliding panel travels sideways on a top track and takes up no room in front of the window. On a balcony or wide opening, sliding keeps the walkway free where a swung leaf would block it. A hinged leaf costs nothing extra in protection but decides whether you can reach the glass to wash it, so pick it before the size is fixed.
Clear polycarbonate panels keep the view and the light but give way under a hard, repeated impact, while steel bars hold against a crowbar. The panel is a solid sheet set in a frame; it stops a thrown object and a casual push, and it keeps a small child from leaning out. Steel is a welded grid of round or square bar, anchored into the wall, and it does not bend under a lever. On a ground floor facing a yard, clear panels read as decoration to a burglar; on an upper floor facing a view they do the job without darkening the room.
| Grille type | Protects against | Window access | Best for |
|---|---|---|---|
| Stationary steel | Break-in | Glass washed through the bars | Ground floor, constant protection |
| Hinged steel | Break-in | Leaf opens fully | Windows you open often |
| Sliding steel | Break-in | Panel slides aside | Balconies, wide openings |
| Clear polycarbonate | Casual intrusion, falls | Fixed, wiped in place | Upper floors, view kept open |
The fixing determines whether a grille holds its shape for years and whether the frame stays intact, and here is how the fitting itself goes.
We pick the fixing on site, because the right anchor depends on the wall material, the window profile and the floor the window sits on. A concrete reveal, a brick pier and a thin plastered wall take different loads, so the mount that suits one opening can fail on the next. We work with Z-shaped brackets, pins and magnets, and our specialist settles which fits the profile and height before drilling. A fixing strong enough for the first floor can be wrong on the tenth, where outside access for installation and rescue changes the plan. That is why metal window grilles in Taldykorgan are always planned around the actual opening, not a standard template.
We fit grilles to plastic, wooden and aluminium windows, and the frame is measured on the spot rather than taken from a drawing, so the bars sit true to the actual opening. The same visit settles the bar stock — round rod or square section — and the size is made to the measured opening, not to a nominal figure. Plastic, wood and aluminium each flex differently under load, so the anchor points and the spacing between them are set for the material in front of the specialist. A frame measured from a drawing drifts by a few millimetres on site, and that gap is what lets a grille rattle or sit crooked against the reveal.
Stopping a burglar and stopping a child from falling are different jobs needing different hardware; here is how to tell the two cases apart before spending money.
For a small child a window restrictor or a sash lock usually does the job, while a grille is the heavier option when break-in protection matters too. A restrictor lets the sash tilt or open a few centimetres and then stops it, and a lock does the same on the handle side. We fit both, and on most upper-floor flats with a toddler the restrictor alone is enough. A grille earns its place when the window faces a roof, balcony rail or ground-floor yard where someone could climb in. A restrictor stops the sash opening wide but leaves the glass reachable, so it protects against a fall, not against someone reaching in. Decide which risk is real first — that answer picks the product.
Keeping an Escape Route and Meeting Building Rules A grille on a window that counts as an escape route needs a leaf that opens from inside without a key, and apartment blocks often have their own facade rules. That means a hinged section wide enough for an adult to climb through, with the hinge and latch on the room side. Upper floors change the maths: the higher the flat, the more a fixed panel is acceptable, because nobody reaches that window from a ladder. On the ground floor the reverse holds, and a full fixed grille can turn a bedroom into a trap if the door is blocked. Check the building rules before the grille is made, as a hinged leaf added later means a second visit.
The order runs from a free measuring visit to fitting and payment once the grilles are up, with each step and what to prepare beforehand below.
The measurer comes at a time that suits you, takes the sizes, and helps you choose the grille type, the bars and the fixings, and the visit costs nothing. At the window he checks the frame profile, the depth of the reveal, the wall beside the opening and the floor level, because each of these decides whether Z-brackets, pins or magnets will hold the unit straight. For hinged and sliding units he also measures the travel of the leaf, so the grille does not foul the handle or the sill. We cover plastic, wood and aluminium frames, balcony windows, and openings in gazebos and verandas. Clear the sill and the floor by the window before the visit, since the measurer needs to see the full reveal and the wall beside it to judge the fixing.
We fix the price in the order after measuring, fit the grilles with our own fitters, and you pay after installation by cash, card or Kaspi. The order lists the grille type, bar spacing, frame colour matched to your windows and fixing method, and the fitter works to those figures rather than improvising on the wall. A standard unit is welded and painted before the visit is scheduled, so the gap between measuring and fitting stays short. Every grille carries a one-year warranty on the work and the parts. Because the price is locked once the size is confirmed, changing the grille type after measuring is the one thing that moves the figure, so settle it at the visit.
A grille outdoors endures rain, frost and sun; how long it keeps its look depends on coating and routine care. Below we cover painting, washing glass and repairs.
We paint the frame any colour to match your windows, and a sound coat keeps corrosion off the metal through wet and frosty seasons. A powder or enamel layer seals the surface from rain, snowmelt and the salt that clings to sills after winter. On a south-facing wall the finish takes more sun and dulls sooner than on a shaded side — normal wear, not a product fault. While the coat stays intact, the metal underneath remains dry and the structure holds its shape. Touch up a scratch as soon as it shows bare material, because corrosion starts in a chip and spreads under the paint where you stop seeing it.
A hinged or sliding unit opens or slides aside so you can wash the glass, and when a fixing works loose we repair the grille and replace the fastenings. A stationary design leaves the panes behind it harder to reach, so plan for a long-handled brush or a squeegee that fits between the uprights. Twice a year is enough for most homes: rinse the metal, wipe the sill and check that the anchors still sit tight against the frame. A unit that has started to shift in its anchors is worth checking before the next storm season, since a loose anchor widens its hole with every gust.
A final pass through the decisions that matter most, so nothing is left to guesswork once the order is placed.
Choosing, fitting and protecting window grilles
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionFor a ground-floor window, a welded grille with a hinged opening leaf and a lock works well: it protects against break-ins and still gives access to the window. A simple pattern without small elements is better so the structure doesn't collect dust.
Yes, the frame doesn't need to be removed: fixings are installed into the wall or profile right in place. The surveyor chooses the method for your profile and floor so the window isn't damaged and keeps working properly.
For brick and concrete, anchors are used that handle pull-out and tear-out loads. For wood, screws or timber lag screws are used, sometimes with corner reinforcement — it depends on the window and the weight of the grille.
The main protection is a metal primer and powder or weather-resistant paint applied before fitting. Once a season, check the welds and chips, touch them up, and don't let moisture sit around the fixings.
A fixed grille is safer: it can't be opened by accident, and a child can't fall out. If you need access to the window, choose a hinged leaf with a lock that opens with a key and is placed out of children's reach.
The measuring visit is free: the specialist comes at a convenient time, takes the opening dimensions and helps you choose the pattern and fixings. Nothing needs to be prepared, just make sure there is access to the window from outside and inside.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp