Craftsman by a window with white window reveals in the children's room
from 4,700 ₸ per linear mWe block the cold at every joint of the window and door, and the price in the order does not change after measuringCalculate

Window Reveal Finishing in Temirtau

Windows and loggias

Panels

PVC sandwich panel on the frames. From 4,700 ₸ per linear m.

A craftsman holds a white piece of sandwich panel for window slopes
GoogleYandex MapsZoon

5,097 reviews on review sites

What window reveal finishing is in Temirtau

Cold often comes not through the glass but through unsealed joints around the frame

Where the draft comes from

In Temirtau winter brings a strong wind from the reservoir, and it finds every gap: the joint under the window sill, an open seam at the balcony door, plasterboard that has come away. The new window itself may be perfectly fine.

We cover the joint with PVC panels, fill the joints with liquid plastic, replace damp plasterboard with PVC and repair chips. For laminated windows we choose reveals that match the frame color.

White PVC panel reveals around a plastic window in a bright room
from 1,500 ₸

joint sealing, per meter

from 15,000 ₸

turnkey door or window

free

measuring

5 jobs
WindowsDoorsLoggiasGapsCorners

How reveal defects are fixed in Temirtau

Four common problems

Hands tighten a screw near the handle of a plastic window sash
  • 01Joint not covered

    The foam is exposed. We cover it with PVC panels.

  • 02Cracks on the reveal

    We cover it with a sandwich panel.

  • 03Mold in the corner

    We insulate and finish again.

  • 04Condensation

    A warm layer removes damp in winter.

Types of reveal work and materials in Temirtau

Five options for apartments, offices and dachas

PVC sandwich panel

Panels

A technician holds a white piece of sandwich panel for window reveals

Warm and washable.

from 4,700 ₸/linear m

Turnkey

Window or door

Window with finished white reveals in a bright room

A complete set for the opening.

from 15,000 ₸/window

Sealing

Interior joints

Neat joint between the window and a white reveal

Against drafts at the window sill.

from 1,500 ₸/linear m

Insulation

Under the reveal

A craftsman holds an insulation board for window slopes, window slope finishing

For corners prone to freezing.

from 19,900 ₸/linear m

Exterior

From the street

White plastic window outside the house with neat light window reveals and a grey drip sill

Protects the joint from wind.

from 4,500 ₸/linear m

Window reveal finishing prices in Temirtau

Per meter or opening, total after measuring

Type of workPrice
PVC reveals (sandwich panels), per linear mpanel with insulation insidefrom 4 700₸ per linear m
Turnkey reveals for a standard windowthree sides and cornersfrom 15 000₸ per window
Plastered revealswith leveling and fillingfrom 3 000₸ per linear m
Exterior revealsprotects the joint from outsidefrom 4 500₸ per linear m
Plasterboard revealsready to paintfrom 1 500₸ per linear m
Reveal insulationagainst freezing and condensationfrom 19 900₸ per linear m
PVC window sill installationtogether with revealsfrom 5 500₸ per linear m
Sill flashing installationwater drainage from the framefrom 3 250₸ per linear m
Sealing interior joints (liquid plastic)joints of the frame, reveal and window sillfrom 1 500₸ per linear m
Sealing exterior jointsprotects the foam from moisture and sunfrom 2 000₸ per linear m

Price fixed in the orderFree measuringPay after the work: cash, card, Kaspi

Book a measuring visit

Why customers order reveal work from us in Temirtau

Our way of working

Experiencesince 2012

we work across Kazakhstan

Reply5 minutes

on WhatsApp

Visitfree

we find where the draft comes from

Priceone

as ordered

Paymentafter

acceptance

Requests09:00–19:00

seven days a week

Colormatched

to the frame lamination

Network17

of cities

How window reveal finishing is carried out in Temirtau

Four steps

  1. A hand holds a phone by the window to measure the opening
    015 minutes

    Photo

    Send a photo of the window or door and the spot where the draft comes from. We will reply quickly.

  2. A tape measure measures the window opening next to a plastic window
    02free

    Inspection

    We find the gaps, check the reveals, match the color, and give you a price.

  3. Hands mark a reveal panel with a pencil on a workbench
    03as scheduled

    Work

    We install the reveals, seal the joints, replace drywall, and repair the corners.

  4. Finished white PVC slopes around a plastic window, window slope finishing
    04with you

    Acceptance

    We check every opening. Payment comes after.

Good to know

Window Reveal Finishing in Temirtau

We handle window reveal finishing in Temirtau as a direct fitter with our own installers, not through an agency. We start with a free measuring visit, help you pick the reveal material for your window type, fit it with insulation and sealing, and you pay only after installation. The price is fixed in the order after measuring.

Which window reveal finishing material suits your window and room

The reveal material decides how the opening holds warmth and how the finished slope looks from inside. We walk through the options for plastic, wooden and aluminium frames, and for rooms with different demands.

Plastic panels, sandwich panels or plaster

Options compared by room and surface
Reveal materialBest forWhat to expect
PVC panelskitchens, bathroomswipe-clean surface, no painting
Sandwich boardscold walls, bedroomsinsulating core, warmer slope
Plastered revealsrooms matched to the wallneeds a top coat and paint

Reveals for wooden, aluminium and non-standard frames

We fit reveals on plastic, wooden and aluminium frames, plus portholes, loggia openings, and gazebo and veranda structures. Wooden frames swell and shrink with the seasons, and aluminium moves with heat, so the slope on either has to follow that movement instead of fighting it. The fitter checks the gap around the frame and picks fixings that will not crack the surface later. For a porthole or a small loggia opening the panel is cut to the same profile but in a narrower section, so the slope does not crowd the glass. On gazebo and veranda openings the reveal has to shed moisture, and we choose the board and the seal with that in mind. Window reveal finishing in Temirtau follows the same rules, so the slope behaves the same way on any frame.

How the free measuring visit and window reveal finishing fitting run

From the first call to a finished opening, the work moves through clear steps. Below is what the measurer does and what reveal fitting actually includes.

What the measurer checks and how the size is set

The measurer comes at a time that suits you, takes the width and depth of the opening, and helps you choose the material, finish and fixings, all free of charge. Our specialist notes the profile, the wall material and the sill line, because a plastic panel, a sandwich panel and plaster each sit against the frame differently. The unit type matters too: a wooden model, an aluminium one and a non-standard aperture each need their own fixing points. The order price is fixed right after measuring, so nothing changes once the panels are cut. Depth matters as much as width, because a reveal that is too shallow leaves a gap at the frame and one that is too deep pushes the board past the sill line.

What reveal fitting includes and how long it takes

Fitting includes removing the old reveal, filling the joint with foam, insulating, sealing and fixing the new panels, and the frame itself stays in place. The fitter strips the old surface, clears the gap between frame and wall, applies foam and insulation, then sets the boards and runs a sealant line along the opening and the outer edge. Fixings are chosen during the measuring visit — brackets, pins or magnets — so the panels hold tight without drilling the profile in the wrong spot. Reveal fitting in Temirtau rarely needs a full day, and the work is planned around one opening at a time. Because the unit is not removed, a single one is usually finished within a working visit, which keeps dust and mess inside one room.

When window reveal finishing needs replacing and when the window just needs repair

Condensation and a draught do not always mean the reveals have to go. First work out where the heat is actually escaping, then decide between a repair and a fresh finish.

Reading the signs of a failing reveal

Peeling paint, dark mould in the corner, a draught along the frame and condensation that never dries are the usual signs a reveal has stopped doing its job. Mould in that corner points to a chilled surface where moist indoor air condenses, and it returns within weeks if the surface stays that way. A reveal that only looks tired can often be refinished, but once the joint behind it is open to outside air, a cosmetic fix will not stop the damp coming back. Insulation of the reveal reduces draughts and the risk of condensation in the window unit, because it closes the gap between frame and wall. The corner that keeps returning is almost always the one with an open seam behind the panel, not the panel itself.

New reveals without a new window

We replace reveals without touching the window block, so a sound frame keeps its glass and fittings while the opening around it gets a fresh, insulated finish. We handle reveal work on plastic, wooden and aluminium windows, including balcony, gazebo and veranda openings, and the measurer chooses Z-brackets, pins or magnets to suit the profile and the floor. If the draught comes from the sash or the seal rather than the reveal, we repair or adjust the window instead, so you are not paying for reveal work that will not solve the problem. We also replace the seal on windows of any maker, from KBE and Rehau to VEKA and Provedal. If the glass unit itself has failed, we can make and replace the glass unit within one day at a surcharge to the glass unit price.

Warranty, timing and how the order is agreed

Terms are easier to agree before the first screw goes in. Here is how cover, timing, payment and day-to-day care go for reveal finishing, so the opening around your window stays sound for years.

What the warranty covers and how payment works

We give a 1-year warranty on window repair, covering both labour and replaced parts, and the reveal work is agreed on the same order, and you pay after installation by cash, card or Kaspi. The price is fixed in the order after measuring, so the figure you agree on the visit is the figure you settle at the end. Reveal finishing usually follows a repair or a fitting, and the warranty terms are confirmed in the order before work starts. Keep the order sheet once the job is done, because it records the material and the agreed sum, which is what the warranty check refers back to if anything needs a second look.

Fitting in winter, at weekends and keeping reveals clean

We work seven days a week and reply on WhatsApp within 5 minutes, and reveal fitting can be booked for winter as well as summer. Cold weather does not stop the job itself, and the fitter plans the visit so the panels sit correctly against the frame. Wipe plastic and sandwich panels with a soft cloth and mild soap rather than abrasive cleaners, and keep the seal at the frame dry so mould has no place to start. A soft brush reaches the corner where the panel meets the sill, and a dry cloth takes up any water that collects there after cleaning. Check the seal line twice a year, because a small split lets moisture behind the board long before you notice a stain on the surface.

Reveals in Temirtau from a direct fitter

Reveal work here is carried out by our own installers rather than by middlemen, which changes both the timing and the person you turn to when a question comes up after fitting.

Why a direct fitter beats an ad or an agency

We are a direct fitter with our own installers, so the person who measures your reveal is on the same team that fits it and answers for the result. A reveal finishing job in Temirtau passes through our hands from the first appointment to the final seal. With an ad or an agency the sizing step and the installation can land with different people, and when something needs adjusting there is no single party to hold to the agreed scope. That gap shows up months later, when a corner lifts or a joint opens and the phone number from the advert no longer connects to anyone who was on site. Ask which crew will actually stand in your room with a level before you agree to anything.

Booking a measuring visit in Temirtau

To arrange a measuring appointment, message us on WhatsApp and we reply within 5 minutes, seven days a week, and the trip itself costs nothing. Have the opening type and the room ready when you write, because the measurer brings the right panel samples and fixings for that opening rather than a single generic set. We cover reveals for plastic, wooden and aluminium frames, loggia openings, and gazebo and veranda structures, and mosquito screens can be ordered from us in 17 cities of Kazakhstan. Sizing and consultation stay free, and the price is fixed once dimensions are taken, so the figure you agree is the figure you pay after fitting.

What to know before window reveal finishing

Five points decide how a reveal ends up looking and performing, from the material you pick to the terms you confirm early in the order.

  • Match the material to the room: sandwich panels insulate better on a cold wall, while plastic panels suit wet rooms and stay easy to wipe.
  • Book the free measuring visit first: the measurer sets the width and depth and fixes the price before any work begins.
  • Fitting seals the joint: the gap around the frame is filled and insulated, and the opening block stays where it is.
  • Read the fault correctly: condensation, mould and a draught along the frame point to a failed reveal, while a sash or seal fault calls for repair of the unit instead.
  • Confirm the terms early: warranty, payment and the cleaning routine are settled before the order is agreed, so nothing is left to guesswork.

Questions about window reveal finishing in Temirtau

Installation on old windows, interior and exterior, condensation, measuring

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can reveals be installed on old windows without replacing them?

Yes, reveals can be updated without removing the window. The technician will carefully remove the old finish, prepare the opening and install new panels around the frame without damaging it.

02What is the difference between interior and exterior reveals?

Interior reveals are made from materials for living spaces, while exterior ones protect against moisture and sun. For outdoor use, moisture-resistant panels or plaster with a protective coating are chosen.

03Does condensation appear on plastic reveals?

The plastic itself does not cause condensation, but if the reveal freezes or the seam is not sealed, moisture can settle. Quality insulation and sealing of the installation seam solve the problem.

04How can you tell when old reveals need replacing rather than repairing?

If the panels have deep cracks, peeling, mold in the corners, or a constant draft from under the windowsill, repair usually no longer helps. In such cases, the old reveals are removed and new ones are installed with insulation and sealing.

05What does measuring for reveals include and how does it proceed?

The measurer measures the width and height of the opening, checks the evenness of the wall and the condition of the installation seam. They also assess the need for insulation and help choose the material for the reveals.

06Are reveals installed on balcony doors and loggias?

Yes, reveals are also installed on balcony doors and loggias. Here the width of the opening and the threshold are taken into account, and for the outer part a moisture-resistant material is chosen so that the reveal is not damaged by precipitation.

Reviews of reveal finishing in Temirtau

5,0based on 97 reviews on platforms
All reviews