Technician holding a dark grey metal window grille in a kitchen
from 7 500 ₸ per m²Measuring is free, installation — 4 500 ₸ per m², painting to match the windows — 5 500 ₸ per m²Calculate

Metal Window Grilles in Temirtau

Standard pattern

Welded grille

Straight rods, even geometry, the most affordable option for window protection — from 7 500 ₸ per m² with optional painting.

Welded metal window grille
GoogleYandex MapsZoon

5,097 reviews on review sites

What metal window grilles in Temirtau are

A metal grille is a frame with rods or a sheet, fixed outside the window: it prevents the leaf from being opened from the street while letting light through.

How it is built

The structure consists of a steel frame sized to the opening and infill: straight rods, forged elements, bent profile or laser-cut sheet. It is fixed outside on anchors, hinges or guides, and the coating protects the metal from moisture and temperature changes.

The grille is chosen for the property and the requirements of the opening: for a plinth and basement, resistance to damp is important; for a country house and garage, the ability to open the leaf for ventilation; for a shop, visibility of the display and strength of the infill. The size of the opening, wall material and window opening method are confirmed before the frame is made.

The pattern is chosen to match the facade: a straight grid of rods for a typical house, forging or a carved sheet for an office and shop. Painting to match the windows or flashing makes the structure part of the facade, not a separate box on the wall.

Metal grille outside a window, vertical bars and wall fixings
from 7 500 ₸

cost of a standard welded grille per square metre

4 500 ₸/m²

installation of the grille on the window, calculated by area

5 500 ₸/m²

powder coating in a colour of your choice

5 types
WeldedWrought ironConvexDecorativeAccordion

How a window grille is fixed in Temirtau

The fixing is chosen for the wall material, floor and how you want to use the window: fixed grille, hinged leaf, removable on anchors or with an emergency hatch.

Grille fixed with anchors in the window opening
  • 01Anchor fixing

    The frame is anchored into the wall or reveal. The removable anchor version costs 16 500 ₸ per m² and can be taken off when you need access to the window from outside.

  • 02Hinged leaf

    The hinged leaf must support the weight of the infill: heavy forged elements require reinforced hinges, and the opening direction — outward or inward — is agreed before the frame is welded.

  • 03Lock in the grille

    The locking mechanism prevents the leaf from being opened from outside without a key. Lock installation is 5 000 ₸ per unit and is fitted into the hinged section.

  • 04Fire escape hatch

    The hatch in the grille serves as an emergency exit and must open from inside without a key. The hatch design and dimensions are agreed with fire safety requirements before manufacturing. The hatch costs 15 000 ₸ per unit.

Metal window grille prices in Temirtau

The table lists grille types and all related work: installation, painting, surcharges for a leaf, hatch and lock, removal of an old structure and repair.

Type of itemPrice
Standard welded grillestandard patternfrom 7 500₸ per m²
Wrought iron grillewith forged elementsfrom 26 000₸ per m²
Convex grillebulging outwardfrom 26 500₸ per m²
Decorative grillelaser cutfrom 25 000₸ per m²
Sliding accordion grillefoldingfrom 28 000₸ per m²
Hinged leafextra charge to the grillefrom 15 000₸ per leaf
Removable grille on anchorscan be removed if neededfrom 16 500₸ per m²
Fire escape hatch in the grilleemergency exitfrom 15 000₸ per piece
Lock inset into the grillelocking mechanismfrom 5 000₸ per piece
Powder coatingchoice of colourfrom 5 500₸ per m²
Grille installationfitting onto the windowfrom 4 500₸ per m²
Grille repairwelding and straighteningfrom 6 000₸ per job
Removal of old grilletaking down before replacementfrom 4 000₸ per piece

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi

Book a measuring visit

Why customers order protective window grilles from us in Temirtau

Eight facts about our work: lead times, colour matching, warranty, free measuring and order geography.

Price fixationin the order

The price is fixed after measuring

Work without days offdaily

We accept requests every day

Colour matchinganycolour

We paint the profile to match your windows: white, brown, grey and others

Installation warranty5years

Warranty on window installation — 5 years, on window repair — 1 year

Free measuring0₸

Own production and painting of the profile to match the windows

Installationincluded

We deliver and install on windows and doors

Coverage17 cities

You can order in 17 cities of Kazakhstan

WhatsApp replyfast

We answer questions about design and fixings in the messenger

How we make and install metal window grilles in Temirtau

Four steps from request to a finished grille on the window

  1. A hand holds a phone with a dark screen by a window before measuring for a grille
    01first step

    Request and measuring

    You leave a request, the measurer arrives at a convenient time, takes the opening dimensions and suggests a pattern and fixings.

  2. A tape measure measures the opening of a white window for a metal grille
    02after measuring

    Manufacturing

    The frame and infill are made to size, and painted in the chosen colour if needed. The price is fixed in the order after measuring.

  3. A finished welded grille stands by the workshop wall, gloves beside it
    03by arrangement

    Installation

    The structure is delivered and fitted to the window: on anchors, hinges or guides, depending on the chosen option.

  4. A finished dark grey grille is installed outside a white window metal grille
    04right after

    Check

    We check that the leaf opens and the lock works, and that the frame is level.

Good to know

Metal Window Grilles in Temirtau Made to Fit Your Window

We make metal window grilles in Temirtau to your exact sizes and fit them to PVC, wooden and aluminium windows. The free measuring visit settles the type, bar spacing and fixing, the price is fixed in the order after measuring, and you pay only once the grilles are up. We work seven days a week.

Which Metal Window Grilles Match Your Window and Your Reason

The type follows the job — break-in protection, child safety, a pet, or keeping the view — and the opening it goes on. Below is a map of the variants and a side-by-side table.

Grille Types and What Each One Is For

  • Welded: the strongest build for ground-floor and back-door openings, steel bar welded into a rigid unit.
  • Forged: decorative scrollwork for street-facing openings, where the look matters as much as the barrier.
  • Clear polycarbonate: a transparent panel that keeps the view and the light while blocking entry.
  • Hinged: leaves that swing on hinges, needed where the opening doubles as an escape route.
  • Solid: fixed panels for service rooms, stairwells and panes that never need to open.
  • Pet Screen: vinyl-coated mesh strong enough for a cat, for panes a pet leans on.

Fitting Grilles to PVC, Wooden and Aluminium Windows

We fit grilles to PVC, wooden and aluminium windows, including transoms, loggia windows, gazebos and verandas, and the fixing is chosen for that profile. The frame material sets the anchor: PVC takes Z-brackets or magnets, timber takes pins driven into the sash, aluminium takes brackets matched to the mullion. A measurer checks the profile and the floor before anything is ordered, because upper floors and ground floors carry different loads and risks. Metal window grilles in Temirtau follow the same rule, so the fixing is matched to the profile and the floor on site. The measurer also notes the wall material and the sill depth, since both decide how far the anchor has to reach.

Grille Options Side by Side

Variants compared by purpose and screen compatibility
Grille typeBest forShares window with a mosquito screen
WeldedGround floor, back doorsYes, with planned fixing
ForgedStreet-facing windowsYes, with planned fixing
Clear polycarbonateKeeping the viewYes, separate frame
HingedEscape-route windowsYes, separate frame
SolidService rooms, stairwellsRarely
Pet ScreenWindows a cat usesYes, as the mesh itself

Child Safety, Break-In Protection and a Way Out

A protective guard is only one element of window protection. Restrictors and locks sit alongside it, and the right choice depends on what the window is guarded against — a small child, a break-in, or both at once.

Grille, Window Restrictor or Lock for a Child

  • Grille: blocks the opening completely, so a child cannot reach the glass or the gap above the sash.
  • Restrictor: limits how far the sash swings open, usually to a slot a small body cannot pass.
  • Lock: secures the handle, so the window stays shut until an adult opens it with a key.
  • Bar spacing: the gap between bars decides whether a limb can slip through, so it matters more than the pattern.
  • Combination: a grille plus a handle lock covers both the opening and the sash, which neither device does alone.

Hinged Leaves and Locks That Keep an Escape Route

A hinged leaf with a lock gives you a grille that still opens from inside, so it protects the window without sealing off the escape route. We build such panels on the same welded frame as a fixed grille, with hinges rated for the panel weight and a lock set into the frame rather than bolted on afterwards. In a fifth-floor panel block the movable part is usually the only section that opens; the rest stays fixed over the glass. The locking unit itself is a small mortise or surface model, and the choice depends on how often the panel will be used — a rarely opened section takes a simpler unit than one a family opens every week. That section is only useful if the lock releases from the room side without a key hunt, so plan where it sits before the frame is welded.

How Metal Window Grilles Are Fixed in Panel Blocks and on Other Walls

Much of Temirtau was built from precast concrete panels, and the question we hear most often is how to mount a protective grille without damaging the wall or the insulation behind it. The fasteners and the fitting order come below.

Fixings Chosen for the Profile and the Floor

The measurer picks the fastening for your window profile and floor, choosing between Z-shaped brackets, pins (plungers) or magnets rather than using one fastener everywhere. On plastic frames the Z-shaped piece usually hooks under the sash profile, while pins sit in the frame's inner groove and magnets suit sashes you want to open freely in summer. The storey changes the choice too: an upper-floor opening gets the same part but a longer anchor, because wind load rises with the level. On a panel wall the load has to reach the solid part of the opening, so where each anchor lands matters more than its size. Ask the measurer to show you the drill points before work starts — a fastener that misses the solid panel edge holds nothing.

Fitting Grilles Without Removing the Window

  • Fixing: the guard is anchored to the existing frame and opening, with the window left in place throughout the visit.
  • Sealing: joints around the frame are closed so draughts and dust do not pass where the guard meets the wall.
  • Clearing up: offcuts, dust and packaging leave with the fitters, and the sill is wiped before they go.
  • Checking: every leaf opens, closes and latches in front of you, so any sticking is corrected on the spot.

Agreeing the Work With the Building

A bar system that changes the look of the facade can need agreement with the building association, so it is worth checking before the order is placed. In practice the building association may ask for a sketch of the outside view, the colour and the mounting method. A unit painted to match the window profile is easier to agree than a contrasting one, because it reads as part of the window rather than an addition. Keep any written reply with the order documents — it settles most questions if a neighbour or an inspector asks later. Where no reply is required, a short note of the agreed colour and fixing method is enough to avoid disputes.

Paint, Care and Keeping Metal Window Grilles Free of Rust

Temirtau swings from hard frost to dry summer heat, and that cycle tests any coating on steel. Below is how we finish the grille, how to look after it, and where rust usually begins.

Painting the Frame to Match Your Windows

We paint the frame any colour to match your windows, so the guard reads as part of the window rather than a separate barrier. The steel is cleaned and primed before the topcoat goes on, and the same colour covers the bars, the outer profile and the weld points where moisture settles first. On hinged door leaves the paint goes over the Economy 32×10 mm or Prestige 42×17 mm profile, so the moving panel and the fixed surround share one tone. A shade matched to the window hides dust and touch-up marks better than a bright contrast colour, which shows every scuff.

Care Through Winter and Summer

  • Touch in chips early: a scratch smaller than a coin takes minutes with matching paint, while bare steel left over winter spreads rust along the bar.
  • Wash twice a year: warm water with a little soap lifts the grit that holds moisture against the coating.
  • Wipe the fixings: Z-brackets, pins and magnets gather dirt at contact points, so clean them whenever you wash the guard.
  • Check after the thaw: freeze-thaw cycles open hairline cracks, and a spring inspection catches them before summer heat sets them.

Measuring, Lead Times and Paying After the Grilles Are Up

The job starts with a free measuring call and ends with payment once the grilles are up. Here is how the measuring runs, what happens to the price and the lead time, and how service works afterwards.

What Happens at the Free Measuring Visit

Measuring and consultation are free, and the measurer comes at a convenient time, takes the sizes and helps choose the design, mesh and fixings. Our specialist checks the window profile, the sill, the wall material and the floor, because each of these decides whether a Z-bracket, a pin or a magnet will hold the frame securely. He also confirms the opening direction and the escape route if a hinged leaf is planned, and shows mesh samples so the choice is made against real material rather than a picture. The call is where the grille type, bar spacing and fixing are settled together, so a decision made there saves a second trip later.

Price Fixed After Measuring and Payment After Fitting

  • Locked in the order: the price is fixed once sizes are taken on site, so the figure you sign is the figure you pay.
  • Paid after installation: cash, card or Kaspi once the guard is up, with no deposit and no surprise additions.
  • Phone quotes are a guide: a figure given over the phone cannot account for wall material or floor height, so the signed total is the real one.
  • One-year warranty: we repair the guard and swap worn fixings after the job.

How to choose metal window grilles for the window and the floor

A protective guard is chosen once but used for years, so the decision rests on a few practical points rather than on the widest catalogue. Below is what matters most before ordering.

  • Match the type to the job: a fixed grille suits ground-floor and utility windows, while a hinged leaf keeps an escape route open on upper floors.
  • Fixings follow the wall and the profile: panel blocks, brick and the floor level each call for their own anchors, settled on site rather than guessed.
  • Measure before you commit: a free visit confirms the opening, the frame colour and the fixing points, and the price is locked in afterwards.
  • Plan for maintenance: a painted frame with a rust-resistant coat and a seasonal wipe-down lasts longer than an untreated one.
  • Agree the work with the building: in panel blocks and shared facades, a short word with the management company prevents problems after fitting.

Questions about metal window grilles in Temirtau

Installation, types, opening, care

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can a metal grille be fitted to a window without drilling the profile, so the window warranty is not lost?

Yes, the grille is fixed to the wall or reveals, not to the plastic profile, so the window warranty remains valid. The measurer selects the fixing method based on the wall material and window type.

02How does a forged window grille differ from a welded profile-pipe grille in strength and appearance?

A welded profile-pipe grille is stiffer and simpler to make, while a forged one wins in pattern and neatness of lines. In terms of strength, both handle protection if the metal and fixings are chosen correctly.

03How do you open the sash for ventilation and cleaning if a metal grille is fitted to the window?

If the sash opens outward, a hinged grille section with a lock is made — it is opened for ventilation and glass cleaning. For a fixed grille, removable elements are provided or a free sash is left.

04How should a metal grille be cared for so it does not rust and keeps its colour?

It is enough to periodically wipe the grille with a damp cloth and inspect the coating. If scratches appear, they are touched up with a special metal paint to prevent corrosion.

05Can metal grilles be installed on windows in winter, or is it better to wait for warmer weather?

Yes, installation is possible in cold weather if fixings suitable for winter conditions are used. The main thing is to avoid heavy snowfall or wind and extremely low temperatures.

06Can a grille be fitted to only one sash of a window?

Yes, the grille can be made for one sash or part of the opening — this is often chosen when the second sash needs to open freely. The measurer will clarify the dimensions and advise on the best distribution of fixings.

Reviews of metal window grilles in Temirtau

5,0based on 97 reviews on platforms
All reviews